共查询到20条相似文献，搜索用时 31 毫秒
1.
以一字形竖缝耗能预制剪力墙作为研究对象,设计了3个装配式剪力墙试件及1个现浇剪力墙对比试件,进行低周往复荷载试验,并对破坏墙体进行CFRP加固,再次进行拟静力试验。试件变化参数包括轴压比、混凝土强度等级及配筋率,对比分析加固前后试件滞回性能、刚度退化、承载力和耗能能力等性能。试验结果表明,与现浇剪力墙相比,一字形竖缝耗能预制剪力墙工作性能良好,阻尼器屈服耗能提高了试件整体工作性能;CFRP加固可有效抑制墙体斜裂缝的发展,对墙体承载力及耗能能力均有显著改善作用;各试件均满足剪力墙弹塑性层间位移角限值要求,延性较好;试件整体表现出良好的抗震性能。 相似文献
2.
Reinforced concrete (RC) precast shear walls are extensively applied in practical engineering, owing to their fast construction speed. However, because of the transport conditions, RC precast shear walls have to be separated into small wall segments during the factory prefabrication procedure before being assembled on site. Typically, wet-type jointing methods are adopted to link the segments, which is time-consuming and results in unreliable post-pouring area strength. To overcome this problem, the novel scheme of the steel shear key (SSK) featuring steel shear panels and combined fillet and plug welding is proposed. Three RC precast shear wall specimens with different linking strength, termed as weakened SSK wall, standard SSK wall, and strengthened SSK wall, respectively, and an integrated shear wall specimen were designed. Quasi-static cyclic loading was applied to investigate the specimens' dynamic properties. The test results suggest the prefabricated wall segments equipped with SSKs showed reliable stiffness and bearing capacity and were improved in energy dissipation ability, compared with conventional shear walls. As the shear stiffness and number of equipped SSKs increased, the specimens exhibited higher strength, but their ductility and energy dissipation were slightly decreased. Most importantly, the standard SSK wall specimen could achieve satisfactory bearing capacity and deformability and is thus recommended for precast building structures. Finite element method (FEM) models were established to validate the test results, and parametric study analysis was conducted based on the coupling ratio of the SSK walls. Finally, an appropriate coupling ratio range is recommended for practical engineering applications. 相似文献
3.
为了研究低层装配式钢筋混凝土水平坐浆墙体的抗震性能,对3个不同剪跨比的低层装配式钢筋混凝土水平坐浆墙体进行了低周反复荷载试验。根据试验结果,分析了剪跨比对墙体的破坏形态、承载力、变形能力、刚度退化和耗能能力的影响。结果表明:随着剪跨比的减小,墙体的破坏形态由弯曲破坏转为剪切破坏;试件SW2和试件SW3的承载力相对于试件SW1分别提高68%和110%,延性分别降低21.8%和37.5%;试件SW1的耗能能力最好,刚度退化速度最缓慢;预制钢筋混凝土墙板与现浇边缘构件协同合作,连接处无竖向裂缝,墙体整体性较好,具有良好的抗震性能,可用于我国城镇建设中的低层住宅结构。 相似文献
4.
Large panel precast concrete structures are built in major seismic regions throughout the world. The seismic behaviour of such structures is strongly dependent upon the characteristics of both the horizontal and vertical connections. The limiting behaviour of precast systems, however, is basically dependent upon the horizontal connection. The influence of horizontal connections can be studied in terms of the behaviour of a simple wall—a vertical stack of panels having only horizontal connections. This paper reports on research into the seismic behaviour of simple precast concrete walls. The research was carried out through the development of computer-based modelling techniques capable of including the typical behavioural characteristics associated with horizontal joints. The model assumes that all non-linear, inelastic behaviour is concentrated in the connection regions and that the precast panels remain linear elastic. This assumption allows the precast panels to be modelled as statically condensed ‘super-elements’ and the connection regions as interface elements. The above modelling technique allows for non-linear-inelastic seismic analysis that is capable of handling both rocking type motions throughout the height of the structure and slippage due to shear in the plane of the connection. A series of parametric studies are presented to illustrate the potential influence of rocking and slip on precast walls with both regular reinforcement and post-tensioning. These studies demonstrate the period elongation associated with the nonlinear-elastic rocking phenomenon. Shear slip is found to occur only when friction coefficients are extremely low or when the normal forces across the connections are low. This latter case occurs only in low buildings or in the upper floors of tall buildings. The paper concludes with a brief discussion of the design implications of these results. Particular attention is paid to the problems stemming from the force concentrations associated with rocking and shear slip. 相似文献
5.
为研究底部放置聚苯乙烯硬泡沫板的抗震性能,对3个剪跨比2.0的两端设置后浇段、底部放置聚苯乙烯硬泡沫板的预制剪力墙试件以及1个相同剪跨比的现浇剪力墙试件进行了拟静力试验。试验结果表明:预制剪力墙底部放置硬聚苯乙烯泡沫板的试件,破坏形态为后浇段与预制剪力墙脱开、后浇段受压破坏;底部放置聚苯板的预制剪力墙试件承载力小于现浇剪力墙试件,耗能能力接近或大于现浇剪力墙试件;各试件的极限位移角为1/98~1/81;预制剪力墙试件的屈服刚度及峰值刚度均比现浇剪力墙试件降低27%~75%,水平分布钢筋未伸入后浇段的试件比伸入后浇段的试件刚度降低更多,后浇段短的试件比后浇段长的试件刚度降低更多。预制试件轴压力主要由后浇段承担,名义屈服及峰值水平力时,钢筋应变分布不符合平截面假定。 相似文献
6.
为了提高装配式剪力墙的抗震性能,提出并设计了一片暗柱内置H型钢装配式内藏钢桁架混凝土剪力墙及一片暗柱内置圆钢管装配式内藏钢桁架混凝土剪力墙,其中H型钢竖向连接采用顶底角钢复合连接,圆钢管竖向连接采用端板焊接.通过对试件进行低周反复加载试验,得到剪力墙试件的破坏模式、滞回曲线、承载力、延性、残余变形、刚度退化和耗能能力等... 相似文献
7.
轴压比对中等高度LC结构剪力墙抗震性能的影响 总被引：2，自引：0，他引：2
轻骨料混凝土(L ight-we ight concrete,简称LC)剪力墙的轴压比是剪力墙抗震设计时一个重要的控制因素,直接关系到其延性性能。为使设计规程具有足够的理论依据,本文通过对六榀轻骨料混凝土剪力墙试件的试验,研究了在低周反复荷载作用下,着重考虑不同轴压比对中等高度有边框剪力墙的破坏形态和变形性能的影响效应,对其滞回特性进行分析,计算了各剪力墙的刚度退化率与延性系数,并将无竖缝剪力墙与带竖缝剪力墙的抗震性能进行了对比。 相似文献
8.
In high seismic zone regions, slender reinforced concrete structural walls are commonly used in high-rise buildings as a main lateral load resisting element. These walls are very effective in limiting the lateral drift of the building due to their large in-plane stiffness. However, the presence of floor slabs influences the behavior of the shear wall. Also, the current design requirements do not account for the presence of floor slabs. To understand the behavior of wall-slab junctions and address the shortcomings of the current design requirements, the influence of two parameters, namely(a) aspect ratio and(b) longitudinal reinforcement ratio on the behavior is studied numerically. It is observed that the presence of floor slabs at different levels tends to partition the wall into squat wall panels between two consecutive floors. The wall-slab junctions show large stress concentrations arising from the strut action in the squat panels. It is also observed that the floor slabs can get significantly damaged near the wall-slab junction for lower vertical reinforcement ratios in the wall. Thus, the current codeprescribed minimum reinforcement in shear walls is not sufficient and needs to be revisited at for improved performance. 相似文献
9.
Panos Dakoulas 《Soil Dynamics and Earthquake Engineering》2012,34(1):11-24
The seismic behavior of tall concrete face rockfill dams in narrow canyons is investigated, based on numerical simulation of the staged construction, creep settlements, reservoir impoundment and seismic shaking of the dam. The study takes into account the flexibility of the canyon rock, the hydrodynamic effects and potential dynamic rockfill settlements. The static analysis uses a hyperbolic model for the rockfill, whereas the dynamic analysis uses a nonlinear hysteretic model, which accounts for the initial dynamic stiffness and produces hysteresis loops in agreement with the experimental data regarding the shear modulus and damping ratio. A damage plasticity model is used for the reinforced concrete, whereas frictional contact behavior is considered at the base and vertical walls of the concrete slab panels. An existing 150-m-high dam is used to investigate some key issues on the seismic behavior of such dams subjected to upstream−downstream and vertical excitation. Emphasis is placed on the evaluation of the tensile stresses within the slab panels, the compressive stresses at the slab-to-slab vertical interfaces and the opening of the joints. Moreover, the effect of potential dynamic settlements on both the slab stresses and joint openings is investigated. Recommendations for increasing the dam safety and reducing the water leakage through the dam body are given. 相似文献
10.
11.
This paper reports the results of cyclic loading tests performed on four specimens consisting of reinforced concrete frames with brick infill walls. The brick infill is pre‐laid, followed by the cast in‐place RC columns and beams. Test parameters include the height‐to‐length ratio of the brick infill wall and the mortar compressive strength. Test results reveal that the in‐plane lateral strength of brick infill wall is related to the fracture path. The fracture path for brick infill walls with large height‐to‐length ratios includes bed joints, cross joints, and vertical splitting of bricks. As a result, the lateral strength of this type of brick infill wall is larger. In comparison, the fracture path for brick infill walls with small height‐to‐length ratios only passes through joints, which is the reason why they have lower lateral strength. Mortar with higher strength improves the lateral strength of brick infill wall. In addition to presenting experimental observations in detail, this paper compares the test results with those obtained from existing methods for assessment of seismic resistance. Comments and recommendations are offered with respect to the capabilities of the assessment methods in predicting stiffness, strength, and ultimate deformation capacity of brick infill walls. Copyright © 2015 John Wiley & Sons, Ltd. 相似文献
12.
A new type of hybrid coupled wall system, consisting of rolled steel coupling beams, reinforced concrete (RC) wall piers, and concrete‐filled tube (CFT) short columns, is introduced. In this new system, the bases of the wall piers are connected to the base beams only through CFT short columns, unlike conventional coupled walls. Yield occurs in the coupling beams and the short columns; hence, in the RC wall piers, only minimum cracking appears. A total of four subassembly specimens, designed to fail in various collapse mechanisms, were cyclically loaded under constant axial force. A benchmark specimen showed ductile behavior with large energy dissipation until fracture occurred in the coupling beam. In the specimen designed to fail in shear in its CFT, substantial axial shortening was observed, but the overall behavior was ductile. Behavior of specimens with small amounts of section steel in the wall panel fringe, or with thin wall panels, also showed ductile behavior, but the strength and energy dissipation were significantly smaller than other two specimens. An analytical model was proposed for a frame analysis program using fiber elements to simulate elastic–plastic behavior of the system. Design methods to prevent shear failure of CFT and RC panels are suggested using the analytical and test results. Copyright © 2008 John Wiley & Sons, Ltd. 相似文献
13.
全装配式预制混凝土结构梁柱组合件抗震性能试验研究 总被引：15，自引：1，他引：15
采用足尺模型对比试验方法对现浇高强混凝土梁柱组合件、预制混凝土结构高强混凝土后浇整体式梁柱组合件和高强预制混凝土结构全装配式梁柱组合件在低周反复荷载作用下的开裂破坏形态、滞回特性、骨架曲线、强度与刚度退化特性、耗能能力、节点核心区域的剪切变形、梁端与柱端的转动变形等抗震性能指标进行了系统研究。结果表明：高强预制混凝土结构后浇整体式梁柱组合件与现浇高强混凝土结构梁柱组合件具有相同的抗震能力，全装配式预制混凝土梁柱组合件的抗震性能和主要抗震性能指标与现浇高强混凝土梁柱组合件和预制混凝土结构后浇整体式梁柱组合件存在明显的差异。对于实际工程应用，应采取必要措施增加全装配式节点的耗能能力。 相似文献
14.
为明晰中空暗缝RC剪力墙抗剪机理和滞回性能,进行1榀1∶3缩尺单层、单跨中空暗缝RC剪力墙板拟静力试验,得到了试件破坏模式、滞回曲线、骨架曲线、刚度退化、强度退化、延性和耗能能力。通过数值模拟分析了混凝土强度、中空暗缝厚度、缝间墙配筋率对剪力墙板水平抗剪承载力的影响。研究结果表明:试件滞回曲线呈捏缩状,耗能能力一般,但具有较好的剪切变形能力;试件最终呈中空暗缝剪碎、缝间墙两端形成弯曲塑性铰的破坏模式;随着混凝土强度的提高和中空暗缝厚度的减小,试件水平抗剪承载力呈增加趋势;缝间墙配筋率对试件水平抗剪承载力及损伤状态的影响较小。 相似文献
15.
The structural behaviour of precast shear wall-diaphragm connection was compared with the monolithic connection under seismic loading. The monolithic connection was made by using U-bars connecting shear wall and slab, and the precast connection was made by using dowel bars in two steps. Firstly, U-shaped dowel bars from the precast shear wall lower panel and precast slab were connected by the longitudinal reinforcement, and screed concreting was done above the precast slab. Secondly, the shear wall upper panel was connected using the dowel bar protruding from the shear wall lower panel. The gap between the dowel bars and the duct was filled with non-shrink grout. The specimens were subjected to reverse cyclic loading at the ends of the slab. This study also aimed to develop a 3-D numerical model using ABAQUS software. The non-linear properties of concrete were defined by using the concrete damaged plasticity(CDP) model to analyse the response of the structure. The precast dowel connection between the shear wall and slab showed superior performance concerning ductility, strength, stiffness and energy dissipation. The developed finite element model exactly predicted the behaviour of connections as similar to that of experimental testing in the laboratory. The average difference between the results from finite element analysis and experimental testing was less than 20%. The results point to the conclusion that the shear resistance is provided by the dowel bars and the stiffness of the precast specimen is due to the diaphragm action of the precast slab. The damage parameter and the interaction between structural members play a crucial role in the modelling of precast connections. 相似文献
16.
An experimental investigation was conducted to study the performance of precast beam-column concrete connections using T-section steel inserts into the concrete beam and joint core, under reversed cyclic loading. Six 2/3-scale interior beam-column subassemblies, one monolithic concrete specimen and five precast concrete specimens were tested. One precast specimen was a simple connection for a gravity load resistant design. Other precast specimens were developed with different attributes to improve their seismic performance. The test results showed that the performance of the monolithic specimen M1 represented ductile seismic behavior. Failure of columns and joints could be prevented, and the failure of the frame occurred at the flexural plastic hinge formation at the beam ends, close to the column faces. For the precast specimens, the splitting crack along the longitudinal lapped splice was a major failure. The precast P5 specimen with double steel T-section inserts showed better seismic performance compared to the other precast models. However, the dowel bars connected to the steel inserts were too short to develop a bond. The design of the precast concrete beams with lap splice is needed for longer lap lengths and should be done at the beam mid span or at the low flexural stress region. 相似文献
17.
预制装配式剪力墙结构墙板节点抗震性能研究 总被引：2，自引：1，他引：1
为掌握预制装配式剪力墙结构墙板节点的抗震性能,对2个现浇试件和2个预制装配式试件进行了拟静力试验.结合非线性分析手段,从承载能力、变形能力、受力机理以及破坏模式等方面综合分析了其抗震性能,并初步探讨了墙板连接钢筋的合理直径.分析结果表明:与现浇试件相比,预制装配式试件承载能力较高,位移延性系数相同,滞同环均较饱满,具有... 相似文献
18.
为研究网格间距对网格剪力墙抗震性能的影响,对两个竖肢中心距不同的小剪跨比网格剪力墙进行了拟静力试验及有限元分析。结果表明：横肢中心距相同、竖肢中心距分别为200 mm及300 mm的网格剪力墙破坏模式不同,竖肢中心距为200 mm的网格剪力墙下部和墙底角部混凝土破坏,破坏模式为剪压破坏;竖肢中心距为300 mm的网格剪力墙沿对角线主斜裂缝错动并产生滑移,破坏模式为剪拉破坏。两个试件的极限位移角均在1/100左右,竖肢中心距为300 mm的网格剪力墙刚度和承载力略大。有限元模拟结果与试验吻合良好,验证了模拟方法的有效性。提出了适用于不同间距网格墙的等效厚度计算方法,网格剪力墙可等效为实体剪力墙计算刚度和承载力。 相似文献
19.
预制钢筋混凝土剪力墙结构抗震性能研究进展（Ⅱ）：结构性能研究 总被引：2，自引：0，他引：2
阐述了预制钢筋混凝土剪力墙结构抗震性能研究的重要性和预制钢筋混凝土剪力墙结构抗震性能研究的最新进展。综述了国内外预制钢筋混凝土剪力墙结构设计规范以及设计方法的研究进展。指出常规预制装配式钢筋混凝土剪力墙结构的抗震性能较差,在地震作用下,主要靠结构构件连接处的损伤和结构构件损坏来消耗能量;无粘结后张拉预应力预制混凝土剪力墙结构,在地震作用下具有自恢复中心能力和良好的抗震能力,但该结构体系的耗能能力不足。认为在预制钢筋混凝土剪力墙结构中设置耗能减震元件,或将预制钢筋混凝土剪力墙结构设计成隔震结构,将有效提高预制钢筋混凝土剪力墙结构的抗震性能。该类预制装配式剪力墙结构的抗震性能有待于进一步研究。 相似文献
20.
The seismic performance of a self-centering precast reinforced concrete (RC) frame with shear walls was investigated in this paper. The lateral force resistance was provided by self-centering precast RC shear walls (SPCW), which utilize a combination of unbonded prestressed post-tensioned (PT) tendons and mild steel reinforcing bars for flexural resistance across base joints. The structures concentrated deformations at the bottom joints and the unbonded PT tendons provided the self-centering restoring force. A 1/3-scale model of a five-story self-centering RC frame with shear walls was designed and tested on a shake-table under a series of bi-directional earthquake excitations with increasing intensity. The acceleration response, roof displacement, inter-story drifts, residual drifts, shear force ratios, hysteresis curves, and local behaviour of the test specimen were analysed and evaluated. The results demonstrated that seismic performance of the test specimen was satisfactory in the plane of the shear wall; however, the structure sustained inter-story drift levels up to 2.45%. Negligible residual drifts were recorded after all applied earthquake excitations. Based on the shake-table test results, it is feasible to apply and popularize a self-centering precast RC frame with shear walls as a structural system in seismic regions. 相似文献