共查询到19条相似文献，搜索用时 203 毫秒
1.
日月山断裂德州段晚更新世以来的活动速率研究 总被引：1，自引：1，他引：0
日月山断裂位于柴达木-祁连活动块体内部,受到东昆仑断裂和祁连-海原断裂等主边界断裂控制,形成了块体内部夹持于主边界断裂之间的次级构造。该断裂的构造位置特殊,确定其晚更新世以来的活动速率可提供青藏高原东北缘向外扩展的最新活动信息。文中通过建立地貌面时间标尺,分析断错的地貌标志,获得了以下2点认识:1)晚更新世以来,日月山断裂德州段主要发育一级洪积扇面fp,三级河流阶地面T1、T2和T3。其中洪积扇fp的废弃年龄约(21.2±0.6)ka,河流阶地T2的废弃年龄约(12.4±0.11)ka;2)日月山断裂晚更新世晚期以来的右旋走滑速率约(2.41±0.25)mm/a,全新世以来的右旋走滑速率约(2.18±0.40)mm/a,垂直滑动速率约(0.24±0.16)mm/a。日月山断裂德州段的右旋走滑速率在晚更新世晚期以来基本不变。日月山断裂并未切错大型块体的边界,而是青藏高原东北缘地区夹持于区域大型左旋走滑断裂内部的1套右旋走滑断裂中的1支。在青藏高原东北缘整体生长和扩展的过程中,右旋走滑断裂对各次级块体之间的变形协调起着十分重要的调节作用。 相似文献
2.
1830年河北磁县M71/2地震发生于磁县—大名断裂带西段, 该断裂地震破裂和活动性的研究受到地震研究者关注。前人研究着眼于1830年磁县大地震的地表破裂, 本文的研究重点是磁县—大名断裂带西段晚更新世以来的断层活动性。应用卫片、 航片解译和野外地震地质调查等方法开展研究, 重要地点进行探槽开挖或野外地质剖面剥落以及采样测年, 确定了断层各段落破裂事件的发生年代。该断裂西段分为3个断层段落: F2为磁县—峰峰段落, F3为东田井村—陶泉乡段落, F4为韩家沟村—甘泉村段落。F2断层段大部分隐伏, 为早中更新世断层。F3断层段东端在东田井村南断错距今22 ka地层, 为晚更新世活动断层; F3断层段在鼓山南山村一带为全新世断层, 从张家楼村到陶泉乡为推测全新世活动断层。F4断层段为全新世断层。F4断层段全部位于基岩山区, 可见多处基岩断面、 地震沟槽及断层眉脊等断层破裂; 一些破裂面发育地衣丽石黄衣[Xanthoria elegans (Link.) Th. Fr.], 使用地衣测年方法确定这些破裂面为1830年磁县大地震地表地震遗迹。磁县—大名断裂带终止于F4西端。综合分析断裂带各个分段的破裂事件, 得到磁县—大名断裂带西段活动事件时空分布, 估计磁县—大名断裂带西段的晚更新世地震复发周期在6000年左右。 相似文献
3.
中甸-大具断裂马家村-大具段位于哈巴雪山北麓及玉龙雪山以北的大具盆地内,总体走向310°～320°,根据卫星影像解译和详细的野外地质地貌调查,认为中甸-大具断裂马家村-大具段自第四纪以来长期活动,横跨断裂的水系右旋位错量可分为8.5～12m、22m左右、47m左右、200～280m、500～510m和1000m左右6个等级。在大具盆地内发现了长约600m的地震地表破裂带,这是该断层段在全新世活动的直接地质证据,在破裂带南东端附近开挖的探槽揭示出自晚更新世以来断裂存在三期活动,可能对应3次地震事件,结合前人在该断裂段获得的地质剖面和断错地貌面测年结果,分析认为马家村-大具段自晚更新世以来至少发生了3次古地震事件,发生时间分别为4910～45 a BP、7000 a BP左右和32.93～19.96ka BP,利用垂直同震位移值估算了水平同震位移量,最终得出每次地震事件的震级为7.5级左右。 相似文献
4.
利用无人机摄影测量技术航测天景山断裂孟家湾的地表地形地貌数据,以获取的数字高程模型为基础,通过构造地貌精细解译进一步提取地震断层的水平位移量及垂直位错量,计算断层的平均水平滑动速率,并分析判识了古地震事件。结果表明:①研究区发育3期河流阶地T3、T2、T1,且均被断错,最新的冲沟T0未见错动;②在T1阶地面上提取水平位移量为(7.77±0.98)m,计算得到全新世中期以来的平均水平滑动速率为0.86~0.91 mm/a;③在T1阶地面上跨陡坎提取垂直位错量为(0.61±0.11)m,其坡度存在2个明显拐点,代表2次地表破裂型地震事件,推测在12000 a前,即晚更新世末期或全新世初期以来至少发生过2次地表破裂型地震。 相似文献
5.
礼县 -罗家堡断裂带晚更新世以来有过明显活动。在礼县—罗家堡段和天水镇—街子口段直接错断全新世地层。断裂沿线地表陡坎发育 ,水系被左旋位错。结合沿该断裂带广泛分布的地震滑坡、砂土液化等 ,认为礼县 -罗家堡断裂带是 1654年天水南 8级地震的发震构造。该断裂晚更新世以来的平均水平位错速率为 0 95mm/a ,平均垂直位移速率为 0 35mm/a ,垂直位移速率约为水平位移速率的 1/ 3。这个比值与一次断裂突发性垂直位错量 ( 1 9m)与水平位错量 ( 5 2m)的比值基本吻合 相似文献
6.
《地震地质》2021,43(3)
安丘-莒县断裂是郯庐断裂带晚第四纪以来活动特征明显的断裂段,曾发生70BC安丘7级地震,对该地震的同震位错量和该断裂的长期活动习性开展研究,有助于理解郯庐断裂带的构造活动。然而一直以来,安丘—莒县段的古地震研究结果并不理想,没有很好的同震位移量证据。文中利用高分辨率的无人机Sf M摄影测量技术提取了大量冲沟的右旋水平位错量,对安丘-莒县段断裂安丘—孟瞳段和青峰岭段的走滑运动特征进行了定量研究,通过分布概率统计,获得该断裂最小的冲沟右旋水平位移量约为5m,并且发现较大的冲沟右旋水平位移量也为5m的倍数,这种现象可能代表了该断裂发生过多次规模相当的地震事件,而约5m的右旋水平位错量暗示该断裂存在地震特征位移。此外,依据位错量与震级和地表破裂长度的关系推断,70BC安丘地震的震级可能存在低估,且产生了安丘—孟瞳、青峰岭和莒县—孟堰3段级联破裂;或者5m的特征位移指示了另一次更大的史前地震。 相似文献
7.
中旬-大具断裂南东段晚第四纪活动的地质地貌证据 总被引：1，自引：0，他引：1
中甸-大具断裂南东段位于哈巴和玉龙雪山北麓,属于川西北次级块体西南边界,断裂总体走向310°～320°,是一条重要的边界断裂。了解该断裂的活动性质、活动时代和滑动速率等对分析川西北次级块体运动,研究该断裂与玉龙雪山东麓断裂的交切关系等问题具有重要意义。文中基于1︰5万活动断层地质填图,对断裂沿线地层地貌、陡坎地貌、地表破裂、典型断层剖面以及河流阶地等进行了详细的研究。研究表明:1)中甸-大具断裂南东段按几何结构、断错地貌表现、断裂活动性可分为马家村—大具次级段和大具—大东次级段。2)通过野外地质调查发现,马家村—大具次级段断错了全新世冲洪积扇,形成了地表破裂,为全新世活动段;而大具—大东次级段虽然也断错了晚更新—全新世地层,但其断错规模及滑动速率均较小,由此认为其全新世以来活动较弱。3)通过分析断裂沿线断层陡坎、水平位错及地表破裂等地质地貌问题,认为马家村—大具次级段的活动性质为右旋走滑兼正断,其晚更新世以来的垂直滑动速率为0. 4～0. 8mm/a,水平滑动速率为1. 5～2. 4mm/a;大具—大东次级段以右旋走滑为主、正断为辅,其晚更新世晚期以来的垂直滑动速率为0. 1mm/a。4)在大具盆地内发现的NW向地表破裂带的形成时代很年轻,不排除是1966年中甸6. 4级地震或1996年丽江7. 0级地震造成的地表破裂。 相似文献
8.
9.
日月山断裂位于东昆仑断裂和祁连-海原断裂等主边界断裂控制的柴达木-祁连活动块体内部,属于二级构造。该断裂构造地貌发育,研究其活动特征可获得青藏高原东北缘向外扩展的信息。文中以晚更新世以来清晰的地貌变形为重点,通过RTK测量方法获得沿断层走向的垂直位移量,基于断层生长连接理论,分析了日月山断裂的演化,并讨论其反映的动力学背景,主要获得了以下3点认识:1)根据晚更新世以来洪积扇和阶地等地貌内长约200km的3期断层陡坎的发育特征,将日月山断裂分为5段,最重要的分段位于第三重叠区(CD-3)。2)日月山断层3期位移量分布形态反映了断层由多条次级破裂生长连接而成,处于断层生长连接的第二阶段。以CD-3为界,NW侧的断层持续生长连接;东南侧的断层活动时间相对较短,活动强度相对较弱。3)断层位移量分布曲线极值指示了应变集中和应力积累的位置。以CD-3重叠区为界,NW侧应力和应变主要集中在中部及断层重叠区,东南侧应力长期积累的范围则相对分散。应力状态可能与区域构造应力挤压作用下块体内部的顺时针旋转有关。 相似文献
10.
通过卫星影像解译、野外实地调查和地质填图,获得滇西南地区澜沧断裂的基本特征和活动性参数,澜沧断裂属于龙陵—澜沧新生地震断裂带的东南段,北起耿马县联合村,向南东经澜沧县哈卜吗、战马坡、大塘子至澜沧县城东南,总体走向NNW,长度约85km。该断裂为一条全新世活动的右旋走滑断裂,兼具倾滑分量,沿断裂形成了丰富的断错地貌现象,主要表现为断层陡崖、冲沟右旋、断层陡坎、断层沟槽、断层垭口和断陷凹坑等。通过详细的野外考察,选择典型断错地貌进行差分GPS测量,结合所获相应地貌面的年代数据,得到该断裂全新世以来平均右旋走滑速率为(4.2±2.3)mm/a,其结果与现今GPS观测所得速率相当,反映了该断裂长期以来滑动速率的稳定性。同时根据岩体的最大位错量4.6~4.8km,估算断裂开始右旋走滑的时代为距今约1.1 Ma,即早更新世晚期。 相似文献
11.
YANG Yuan-yuan ZHAO Peng ZHENG Hai-gang YAO Da-quan WANG Xing-zhou MIAO Peng LI Jun-hui WANG Xiao-li SHU Peng 《地震地质》2017,39(4):644-655
Anqiu-Juxian Fault(F5) is the latest active fault in the eastern graben of the middle segment of the Tanlu fault zone. In recent years, the research results of F5 in Jiangsu Province are abundant, and it is found that Holocene activity is prevalent in different segments, and the movement pattern is dominated by dextral strike-slip and squeezing thrust. The Anhui segment and the Jiangsu segment of the Tan-Lu fault zone are bounded by the Huaihe River. Previous studies have not discussed the extension and activity of F5 in the south of the Huaihe River in Anhui Province. This paper chooses the Ziyangshan segment of Tanlu fault zone in the south of the Huaihe River as the breakthrough point, which is consistent with the linear image feature of extension of F5 in Jiangsu Province. Through the remote sensing image interpretation, geological and geomorphological investigation and trench excavation, we initially get the following understanding:(1)The linear structural features of the Ziyang segment are clear, and the fault is developed on the gentle slope of the Mesozoic red sandstone uplift along the Fushan-Ziyangshan, which is the southern extension of the Anqiu-Juxian Fault(F5); (2)The excavation of the Zhuliu trench reveals that the late Pleistocene clastic layers are interrupted, and the late late Pleistocene to early Holocene black clay layers are filled along the fault to form black fault strips and black soil-filled wedges, indicating that the latest active age of the fault is early Holocene; (3)The excavation of Zhuliu trench reveals that there are at least 3 paleo-earthquake events since the Quaternary, the first paleo-seismic event is dated to the early and middle Quaternary, and the 2nd paleo-seismic event is 20.10~13.46ka BP, the age of the third paleo-seismic event is(10.15±0.05)~(8.16±0.05)ka BP. These results complement our understanding of the late Quaternary activity in the Anhui segment of the Tanlu fault zone, providing basic data for earthquake monitoring and seismic damage prevention in Anhui Province. 相似文献
12.
SURFACE TRACKS AND SLIP RATE OF THE FAULT ALONG THE SOUTHERN MARGIN OF THE WUWEI BASIN IN THE LATE QUATERNARY 
下载免费PDF全文
下载免费PDF全文 The fault along the southern margin of the Wuwei Basin, located in the eastern Hexi Corridor, NW China, plays an important role in the thrust fault system in the northern Qilian Mountains. The activities of this fault resulted in the generation of the Gulang earthquake(MS8.0) in 1927. Based on remote sensing image interpretation, geological and geomorphic observations in the field and 14C geochronological dating results, we conducted a detailed research on the geometry and kinematics of the fault. According to the discontinuous geometric distribution and variable strike directions, we divide this fault into 5 segments: Kangningqiao Fault(F1), Nanyinghe Fault(F2), Shangguchengcun-Zhangliugou Fault(F3), Tajiazhuang Fault(F4)and Yanjiazhuang Fault(F5). Results indicate that this fault, with a total of 60km long trace at the surface, has been active since the late Pleistocene. It behaves predominantly as a thrust fault and is accompanied with a locally sinistral strike-slip component along the Nanyinghe Fault(F2). Intensive activities of this fault in Holocene have caused extensive occurrence of dislocated landforms along its strike. Some measured displacements of the dislocated geologic or geomorphic units, combined with the 14C dating results, yield a vertical slip rate of (0.44±0.08)mm/a on this fault in Holocene, and a sinistral strike-slip rate of (1.43±0.08)mm/a on the Nanyinhhe Fault (F2) in late Pleistocene. 相似文献
13.
The Riyue Mt. Fault is a secondary fault controlled by the major regional boundary faults (East Kunlun Fault and Qilian-Haiyuan Fault). It lies in the interior of Qaidam-Qilianshan block and between the major regional boundary faults. The Riyue Mt. fault zone locates in the special tectonic setting which can provide some evidences for recent activity of outward extension of NE Tibetan plateau, so it is of significance to determine the activity of Riyue Mt. Fault since late Pleistocene to Holocene. In this paper, we have obtained some findings along the Dezhou segment of Riyue Mt. Fault by interpreting the piedmont alluvial fans, measuring fault scarps, and excavating trenches across the fault scarp. The findings are as follows:(1) Since the late Pleistocene, there are an alluvial fan fp and three river terraces T1-T3 formed on the Dezhou segment. The abandonment age of fp is approximately (21.2±0.6) ka, and that of the river terrace T2 is (12.4±0.11) ka. (2) Since the late Pleistocene, the dextral strike-slip rate of the Riyue Mt. Fault is (2.41±0.25) mm/a. In the Holocene, the dextral strike-slip rate of the fault is (2.18±0.40) mm/a, and its vertical displacement rate is (0.24±0.16) mm/a. This result indicates that the dextral strike-slip rate of the Riyue Mt. Fault has not changed since the late Pleistocene. It is believed that, as one of the dextral strikeslip faults, sandwiched between the the regional big left-lateral strike-slip faults, the Riyue Mt. Fault didn't cut the boundary zone of the large block. What's more, the dextral strike-slip faults play an important role in the coordination of deformation between the sub-blocks during the long term growth and expansion of the northeast Tibetan plateau. 相似文献
14.
ANALYSIS OF EVOLUTION OF THE RIYUESHAN FAULT SINCE LATE PLEISTOCENE USING STRUCTURAL GEOMORPHOLOGY 下载免费PDF全文
下载免费PDF全文 The northeastern margin of Tibetan plateau is an active block controlled by the eastern Kunlun fault zone, the Qilian Shan-Haiyuan fault zone, and the Altyn Tagh fault zone. It is the frontier and the sensitive area of neotectonic activity since the Cenozoic. There are widespread folds, thrust faults and stike-slip faults in the northeastern Tibetan plateau produced by the intensive tectonic deformation, indicating that this area is suffering the crustal shortening, left-lateral shear and vertical uplift. The Riyueshan Fault is one of the major faults in the dextral strike-slip faults systems, which lies between the two major large-scale left-lateral strike-slip faults, the Qilian-Haiyuan Fault and the eastern Kunlun Fault. In the process of growing and expanding of the entire Tibetan plateau, the dextral strike-slip faults play an important role in regulating the deformation and transformation between the secondary blocks. In the early Quaternary, because of the northeastward expansion of the northeastern Tibetan plateau, tectonic deformations such as NE-direction extrusion shortening, clockwise rotation, and SEE-direction extrusion occurred in the northeastern margin of the Tibetan plateau, which lead to the left-lateral slip movement of the NWW-trending major regional boundary faults. As the result, the NNW-trending faults which lie between these NWW direction faults are developed. The main geomorphic units developed within the research area are controlled by the Riyueshan Fault, formed due to the northeastward motion of the Tibet block. These geomorphic units could be classified as:Qinghai Lake Basin, Haiyan Basin, Datonghe Basin, Dezhou Basin, and the mountains developed between the basins such as the Datongshan and the Riyueshan. Paleo basins, alluvial fans, multiple levels of terraces are developed at mountain fronts. The climate variation caused the formation of the geomorphic units during the expansion period of the lakes within the northeastern Tibetan plateau. There are two levels of alluvial fans and three levels of fluvial terrace developed in the study area, the sediments of the alluvial fans and fluvial terraces formed by different sources are developed in the same period. The Riyueshan Fault connects with the NNW-trending left-lateral strike-slip north marginal Tuoleshan fault in the north, and obliquely connects with the Lajishan thrust fault in the south. The fault extends for about 180km from north to south, passing through Datonghe, Reshui coal mine, Chaka River, Tuole, Ketu and Xicha, and connecting with the Lajishan thrusts near the Kesuer Basin. The Riyueshan Fault consists of five discontinuous right-step en-echelon sub-fault segments, with a spacing of 2~3km, and pull-apart basins are formed in the stepovers.
The Riyueshan Fault is a secondary fault located in the Qaidam-Qilian active block which is controlled by the major boundary faults, such as the East Kunlun Fault and the Qilian-Haiyuan Fault. Its activity characteristics provide information of the outward expansion of the northeastern margin of Tibet. Tectonic landforms are developed along the Riyueshan Fault. Focusing on the distinct geomorphic deformation since late Pleistocene, the paper obtains the vertical displacement along the fault strike by RTK measurement method. Based on the fault growth-linkage theory, the evolution of the Riyueshan Fault and the related kinetic background are discussed. The following three conclusions are obtained:1)According to the characteristics of development of the three-stage 200km-long steep fault scarp developed in the landforms of the late Pleistocene alluvial fans and terraces, the Riyueshan Fault is divided into five segments, with the most important segment located in the third stepover(CD-3); 2)The three-stage displacement distribution pattern of the Riyueshan Fault reveals that the fault was formed by the growths and connections of multiple secondary faults and is in the second stage of fault growth and connection. With CD-3 as the boundary, the faults on the NW side continue to grow and connect; the fault activity time on the SE side is shorter, and the activity intensity is weaker; 3)The extreme value of the fault displacement distribution curve indicates the location of strain concentration and stress accumulation. With the stepover CD-3 as the boundary, the stress and strain on NW side are mainly concentrated in the middle and fault stepovers. The long-term accumulation range of stress on the SE side is relatively dispersed. The stress state may be related to the counterclockwise rotation inside the block under the compression of regional tectonic stress. 相似文献
15.
郯庐断裂带是中国东部最大的一个活动构造带,其内部结构非常复杂,不同区段表现出不同特征的构造样式.本文采用浅层地震反射波成像技术对郯庐断裂带宿迁段的近地表结构进行了高分辨率成像,利用该区已有的深地震反射剖面数据,采用初至波层析成像方法获得了郯庐断裂带的浅层P波速度结构.结果表明,郯庐断裂带宿迁段是一个由多条断裂以及凹陷和隆起构成的复杂构造带,且新生代地层厚度和地震波速分布明显受到断裂的影响与控制.郯庐断裂带的东、西两侧为基底隆起区,近地表速度结构呈现为明显的高速特征,新生代地层厚度小于200m.郯庐断裂带总体显示为低速凹陷结构,新生代地层厚度在300～600m之间变化,最厚处位于宿迁市的陵城镇附近.郯庐断裂带宿迁段主要由5条断裂构成,从这些断裂的上断点埋深和第四纪活动特征来看,郯庐断裂带的东边界断裂F_1和西边界断裂F_4的活动性相对较弱,为第四纪早期活动断裂.断裂F_2和F_3控制了郯庐断裂带内部的新生代凹陷,两者的活动时代分别为中更新世和晚更新世.安丘—莒县断裂F_5位于断裂F_1和F_2之间,由2条相向而倾的分支断层F_5和F_(5-1)构成,其活动时代分别为全新世和晚更新世.研究结果为进一步认识郯庐断裂带宿迁段的近地表特征及其活动性提供了新证据. 相似文献
16.
NEW EVIDENCES FOR LATE QUATERNARY ACTIVITY IN THE SOUTHERN SEGMENT OF THE YISHU-TANGTOU FAULT,THE TAN-LU FAULT ZONE,AND ITS TECTONIC IMPLICATION 下载免费PDF全文
下载免费PDF全文 CAO Jun XU Han-gang RAN Yong-kang LIANG Ming-jian LEI Sheng-xue ZHANG Peng LI Li-mei GU Qin-ping ZHAO Qi-guang 《地震地质》2017,39(2):287-303
The Tan-Lu Fault Zone(TLFZ), a well-known lithosphere fault zone in eastern China, is a boundary tectonic belt of the secondary block within the North China plate, and its seismic risk has always been a focus problem. Previous studies were primarily conducted on the eastern graben faults of the Yishu segment where there are historical earthquake records, but the faults in western graben have seldom been involved. So, there has been no agreement about the activity of the western graben fault from the previous studies. This paper focuses on the activity of the two buried faults in the western graben along the southern segment of Yishu through combination of shallow seismic reflection profile and composite drilling section exploration.
Shallow seismic reflection profile reveals that the Tangwu-Gegou Fault(F4)only affects the top surface of Suqian Formation, therefore, the fault may be an early Quaternary fault. The Yishui-Tangtou Fault(F3)has displaced the upper Pleistocene series in the shallow seismic reflection profile, suggesting that the fault may be a late Pleistocene active fault. Drilling was implemented in Caiji Town and Lingcheng Town along the Yishui-Tangtou Fault(F3)respectively, and the result shows that the latest activity time of Yishui-Tangtou Fault(F3)is between(91.2±4.4)ka and(97.0±4.8)ka, therefore, the fault belongs to late Pleistocene active fault.
Combined with the latest research on the activity of other faults along TLFZ, both faults in eastern and western graben were active during the late Pleistocene in the southern segment of the Yishu fault zone, however, only the fault in eastern graben was active in the Holocene. This phenomenon is the tectonic response to the subduction of the Pacific and Philippine Sea Plate and collision between India and Asian Plate. The two late Quaternary active faults in the Yishu segment of TLFZ are deep faults and present different forms on the surface and in near surface according to studies of deep seismic reflection profile, seismic wave function and seismic relocation. Considering the tectonic structure of the southern segment of Yishu fault zone, the relationship between deep and shallow structures, and the impact of 1668 Tancheng earthquake(M=8(1/2)), the seismogenic ability of moderate-strong earthquake along the Yishui-Tangtou Fault(F3)can't be ignored. 相似文献
17.
STUDY ON THE LATEST ACTIVITY OF WUYUNSHAN-HEFEI FAULT IN HEFEI BASIN,THE WESTERN BRANCH OF THE TANLU FAULT ZONE 下载免费PDF全文
下载免费PDF全文 ZHENG Ying-ping YANG Xiao-ping SHU Peng LU Shuo FANG Liang-hao SHI Jin-hu HUANG Xiong-nan LIU Chun-ru 《地震地质》1979,42(1):50-64
Tanlu fault zone is the largest strike-slip fault system in eastern China. Since it was discovered by aeromagnetics in 1960s, it has been widely concerned by scholars at home and abroad, and a lot of research has been done on its formation and evolution. At the same time, the Tanlu fault zone is also the main seismic structural zone in China, with an obvious characteristic of segmentation of seismicity. Major earthquakes are mostly concentrated in the Bohai section and Weifang-Jiashan section. For example, the largest earthquake occurring in the Bohai section is M7.4 earthquake, and the largest earthquake occurring in the Weifang-Jiashan section is M8.5 earthquake. Therefore, the research on the active structure of the Tanlu fault zone is mainly concentrated in these two sections. With the deepening of research, some scholars carried out a lot of research on the middle section of Tanlu fault zone, which is distributed in Shandong and northern Jiangsu Province, including five nearly parallel fault systems, i.e. Changyi-Dadian Fault(F1), Baifenzi-Fulaishan Fault(F2), Yishui-Tangtou Fault(F3), Tangwu-Gegou Fault(F4) and Anqiu-Juxian Fault(F5). They find that the faults F3 and F5 are still active since the late Quaternary. In recent years, we have got a further understanding of the geometric distribution, active age and active nature of Fault F5, and found that it is still active in Holocene. At the same time, the latest research on the extension of F5 into Anhui suggests that there is a late Pleistocene-Holocene fault existing near the Huaihe River in Anhui Province.
The Tanlu fault zone extends into Anhui Province and the extension section is completely buried, especially in the Hefei Basin south of Dingyuan. At present, there is little research on the activity of this fault segment, and it is very difficult to study its geometric structure and active nature, and even whether the fault exists has not been clear. Precisely determining the distribution, active properties and the latest active time of the hidden faults under urban areas is of great significance not only for studying the rupture behavior and segmentation characteristics of the southern section of the Tanlu fault zone, but also for providing important basis for urban seismic fortification. By using the method of shallow seismic prospecting and the combined drilling geological section, this paper carries out a detailed exploration and research on the Wuyunshan-Hefei Fault, the west branch fault of Tanlu fault zone buried in Hefei Basin. Four shallow seismic prospecting lines and two rows of joint borehole profiles are laid across the fault in Hefei urban area from north to south. Using 14C, OSL and ESR dating methods, ages of 34 samples of borehole stratigraphic profiles are obtained. The results show that the youngest stratum dislocated by the Wuyunshan-Hefei Fault is the Mesopleistocene blue-gray clay layer, and its activity is characterized by reverse faulting, with a maximum vertical offset of 2.4m. The latest active age is late Mesopleistocene, and the depth of the shallowest upper breaking point is 17m. This study confirms that the west branch of Tanlu fault zone cuts through Hefei Basin and is still active since Quaternary. Its latest activity age in Hefei Basin is late of Middle Pleistocene, and the latest activity is characterized by thrusting. The research results enrich the understanding of the overall activity of Tanlu fault zone in the buried section of Hefei Basin and provide reliable basic data for earthquake monitoring, prediction and earthquake damage prevention in Anhui Province. 相似文献
18.
2021年5月22日青海玛多发生MS7.4地震,震源断层错动在地表形成了长达160 km的同震地表破裂。可靠的地震地表破裂带参数是研究震源断层活动机制和评价地震危险性的重要基础。采用无人机倾斜摄影测量技术可以获得高精度的点云数据并产出DOM和DEM数据。通过跨破裂带的地形测量,获取了玛多MS7.4地震同震地表变形的垂直位移、水平缩短量和水平拉张量等参数。测量结果显示,玛多MS7.4地震发震断层在不同破裂段具有不同性质和大小的倾滑分量,其中具有压扭性质的野马滩观测点断层垂直位移为0.69～1.01 m,倾向水平缩短量为0.17～0.41 m,倾滑位移为0.71～1.09 m;具有张扭性质的朗玛加合日段断层垂直位移为0.34～0.54 m,倾向水平拉张量为1.99～2.08 m。 相似文献
19.
The southeast section of Zhongdian-Daju Fault is located in the northern part of Haba and Yulong Snow Mountain, belonging to the southwestern boundary of the secondary block in northwestern Sichuan, an important boundary fault striking 310°~320° on the whole. The nature of the fault, the age of its activity and the slip rate are of great significance for the analysis of the secondary block movement in the northwestern Sichuan and the intersection relationship with the eastern piedmont fault of Yulong Mountains.
Based on the 1 ︰ 5 million-scale active fault geological mapping, this paper studies in detail the stratigraphic landform, scarp landform, surface rupture, typical fault profile and river terrace along the fault. Based on the research results, we divide the southeastern section of Zhongdian-Daju Fault into two sub-segments, the Majiacun-Daju sub-segment and the Daju-Dadong sub-segment, according to the geometric structure, fault landforms and fault activity.
(1)Fault scarp:In the Majiacun-Daju sub-segment, the fault parallelly controls the two sides of the Haba fault depression. It cuts the late Pleistocene moraine deposits, forming a fault scarp of about 4.5km long and(14±2)m high. The continuity of the scarp is very good, and it is also very obvious in the remote sensing image. In the Daju-Dadong sub-segment, a scarp with a height of about 2m is formed, and an optical luminescence dating sample is collected from the upper part of the gravel layer on the second-order terrace to obtain an age of(22±2.2)ka.
(2)Horizontal dislocation:In the Majiacun-Daju sub-segment, through the analysis of the development of outwash fans in the area and the measurement and induction of the gully dislocations, it is considered that there are at least three stages of outwash fans developed in the area and there may be four phases of faulting. That is, the earliest-stage outwash fan and gully are horizontally dislocated about 1km; the second-stage outwash fan and gully are horizontally dislocated about 47m, and the vertical dislocation is about(14±2)m; the gully in the third stage outwash fan is horizontally dislocated twice, the first dislocation formed a beheaded gully with a dislocation of 22m, and the second formed a beheaded gully with a dislocation of 8.5m. It is further proved that the fault has strong activity since the Holocene in the Majiacun to Daju area. In the Daju-Dadong sub-segment, there are no obvious horizontal dislocations in the alluvial deposits since the Holocene. Only 3~4 gullies are found to be offset right-laterally in the ridges east of Wenhe Village, with the maximum dislocation of 210m, which may be the older phase dislocation.
(3)Surface rupture:In the northwest direction of Dabazi Village on the T3 terrace in the basin between Majiacun and Daju, an earthquake surface rupture zone is found, extending in the NW direction. The rupture zone left clear traces on the about 1m-thick, hard T3 terrace surface formed by calcification of sand gravels, and the overburden either upwarps and bulges, or ruptures, generates ground fissures, or forms small pull-apart "depressions" locally. However, the rupture zone is not large in size, about 350m long, 60m wide at the widest point, and 0.3~1.5m high. It is partially en-echelon or obliquely arranged, dominated by compressive ruptures. Through observation, the possibility of artificial transformation is ruled out for these upwarping bulges, ruptures or ground fissures. The fault section is found in the southeast direction of the rupture zone. The slickensides at the section show that the fault is dominated by right-lateral strike-slip with a small amount of thrust. In the eastern sub-segment, only intermittently distributed surface ruptures are found in the northern part of the village, and the scale is small.
In summary, through the field geological survey, it is found that the Majiacun-Daju sub-segment is a Holocene active segment. Though the Daju-Dadong sub-segment also offset the late Pleistocene to Holocene strata, it is considered that its Holocene activity is weak in terms of either the dislocation amount or the slip rate of this segment.
By analyzing the geological and geomorphological evidences, such as fault scarps, horizontal dislocation and surface ruptures along the fault, it is considered that the Majiacun-Daju sub-segment is a right-lateral strike-slip fault with a normal faulting component, and its vertical slip rate since the late Pleistocene is(0.4~0.8)mm/a, the horizontal slip rate is 1.5~2.4mm/a. The Daju-Dadong sub-segment is dominated by right-lateral strike-slip with a normal faulting component, and its vertical slip rate since the late Late Cenozoic is 0.1mm/a.
The formation of the NW-trending surface rupture zone found in the Daju Basin is very young, where there are only two major earthquakes, namely, the MS6.4 1966 Zhongdian earthquake and the 1996 Lijiang MS7.0 earthquake, and both earthquakes produced NW-oriented surface rupture zones. Therefore, it cannot be ruled out that the rupture zone is a product of the 1966 Zhongdian MS6.4 earthquake or the 1996 Lijiang MS7.0 earthquake. 相似文献