首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 62 毫秒
1.
We obtained the 2-D P-wave velocity structure of the lithosphere in the eastern North China Craton, Shanxi fault subsidence zone, and Yinchuan-Hetao fault subsidence zone by ray tracking technology based on six groups of clearly identified crustal phases and one group of lithospheric interface reflection phases from seismic recording sections of 21 shots along the 1300-km-long Yancheng-Baotou deep seismic wide-angle reflection/refraction profile. The results indicate significant differences between the lithospheric structure east and west of the Taihang Mountains, which is a gravity-gradient zone as well as a zone of abrupt change in lithospheric thickness and a separation zone of different rock components. East of the Taihang Mountains, the Mesozoic and Cenozoic lithospheric structure of the North China Craton has undergone strong reformation and destruction, resulting in the lithosphere thickness decreasing to 70–80 km. The North China Basin has a very thick Cenozoic sedimentary cover and the deepest point of crystalline basement is about 7.0 km, with the crustal thickness decreasing to about 31.0 km. The crystalline basement of the Luxi uplift zone is relatively shallow with a depth of 1.0–2.0 km and crustal thickness of 33.0–35.0 km. The Subei Basin has a thicker Cenozoic sedimentary cover and the bottom of its crystalline basement is at about 5.0–6.0 km with a crustal thickness of 31.0–32.0 km. The Tanlu fault is a deep fracture which cuts the lithosphere with a significant velocity structure difference on either side of the fault. The Tanlu fault plays an important role in the lithospheric destruction in the eastern part of the North China Craton. West of the Taihang Mountains, the crustal thickness increases significantly. The crust thickness beneath the Shanxi fault depression zone is about 46 km, and there is a low-velocity structure with a velocity of less than 6.1 km s?? in the upper part of the middle crust. Combined with other geophysical study results, our data shows that the lithospheric destruction at the Shaanxi-Shanxi fault depression zone and the Yinchuan-Hetao rift surrounding the Ordos block is non-uniform. The lithosphere thickness is about 80–90 km in the Datong-Baotou area, 75–137 km at the Dingxiang-Shenmu region, and about 80–120 km in the Anyang-Yichuan area. The non-uniform lithospheric destruction may be related to the ancient tectonic zone surrounding the Ordos block. This zone experienced multi-period tectonic events in the long-term process of its tectonic evolution and was repeatedly transformed and weakened. The weakening level is related to the interactions with the Ordos block. The continental collision between the Cenozoic India and Eurasia plates and N-E thrusting by the Qinghai Tibet Plateau block is causing further reformation and reduction of the lithosphere.  相似文献   

2.
1-D and 2-D calculation and interpretation are carried out with the DSS data from the western section of Heze-Changzhi profile and the southern section of Zhengzhou-Jinan profile. 2-D velocity structure is determined in Tangyin graben and its adjacent area. The result shows that velocity structure of the crust and upper mantle is obviously different in vertical and lateral directions. Crustal thickness varies apparently in this area, and there are local low velocity blocks in the interior crust. The swelling M-discontinuity corresponds to Tangyin graben and Moho depth at the highest swelling position is 31 km. Toward the east, its depth gradually increases to 32 km in Xunxian swelling; toward the west, M-discontinuity becomes a steep zone at the piedmont uplift of Taihang Mountain and reaches 40 km at depth near Changzhi. Through analyzing the relationship between historical earthquakes and deep structure in North China, we infer that seismic risk exists in Tangyin graben and its adjacent area.  相似文献   

3.
The Shaowu-Nanping-Pingtan deep seismic sounding profile is located in northern Fujian Province. High-quality seismic sounding data were acquired by five large explosive blasts received by 133 digital seismic instruments along the profile. Based on seismic facies analysis and travel-time picking on shot record sections, a model of the velocity structure of upper crust was developed by finite-difference tomography of the first breaks; the 2-D P-wave velocity structure and tectonic characteristics of the crust were interpreted further by fitting of waveforms and seismic travel times. The results show that the top of the crystalline basement is buried at depths of 2.0–4.0 km, with the deepest buried up to 4.0 km within the Fuzhou Basin. The Moho interface was found to be deeper in the west and shallower in the east(i.e., 30.0 km near the coast, increasing to 33.0 km northwestward). The lower crust on the east side of the Zhenghe-Haifeng Fault Zone has a smoothly varying gradient structure, whereas on the west side it has two distinct layers with a boundary between those layers at a depth of 23 km. Seismic velocities on the west side are generally lower than on the east side; a low velocity layer is observed with a lowest speed of 6.25 km/s at a depth of 22 km on the west side, which may consist of partially molten material. The Zhenghe-Haifeng Fault is a deep crustal fault, and should be a channel for deep material upwelling; it has a direct relationship with multiple stages of continental tectonic movements in Southern China and with multiple magmatic events that started in the Proterozoic and ended in the of late Tertiary in Fujian.  相似文献   

4.
Southwest Yunnan, located in the southern segment of the north-south seismic belt, is one of the regions with strong tectonic movement and seismic activity in China. Study on the characteristics of tectonic setting and deep geophysical field in the region is an important issue in basic science. In 2013, we conducted a 600-km-long Menghai-Gengma-Lushui profile of deep seismic wide-angle reflection/refraction and high-resolution seismic refraction in Southwest Yunnan. In this paper, we use 6 groups of clear intracrustal P-wave phases picked from the seismic record sections of 11 shots to build a velocity structure model of basement and 2D crustal P-wave of the region by using finite difference inversion and ray travel time forward fitting technology. The results show that, from south to north, the crust gradually thickens along the profile and its basement shows a significant lateral heterogeneity. In the vicinity of the Nanting River fault, the basement structure shows the character of alternate depressions and uplifts, and the shallowest basement is about 1.0 km. In the vicinity of Tengchong and Lancang, the basement is about 5.0 km deep. The velocity of the middle and lower crust in the region generally increases with the increasing of depth. At the block boundary and beneath the fault tectonic belt, the velocity contours show apparent irregularity and the P-wave velocity changes sharply. In this region, the Moho gradually deepens from south to north with relatively large lateral undulations. The shallowest point of the Moho is located near Menghai at a depth of about 32.0 km. The deepest point of the Moho is located near Tengchong at a depth of about 40.5 km. Between Gengma and Yongde, the Moho shows significantly fast uplifting and depressing with an amplitude of about 4.0 km. Beneath the Nanting River fault, Longling-Ruili fault, Dayingjiang fault and Tengchong volcano, the basement velocity structure, 2D crustal P-wave velocity structure, distribution of average profile velocity and intracrustal interface spreading also show significant changes from the basement to the top of the Moho, indicating that the crustal velocity and medium physical properties beneath the fault tectonic belt are apparently different from the crustal materials on its both sides, which suggests that these faults should be in a certain scale and may extend to the lower crust or the top of the upper mantle. The earthquakes in the region mainly occurred at a depth of 10–20 km, and the seismic activity is related to the intracrustal medium velocity difference and fault belt distribution. The results can serve as the important data of the crust-mantle structure for the analysis of the deep tectonic setting, earthquake precise positioning, seismogenic structure modeling of the seismic activities in Southwest Yunnan, as well as the important reference for the evaluation of seismic hazard and the planning of earthquake disaster mitigation of this region.  相似文献   

5.
The Deep Seismic Sounding( DSS) projects carried out from the 1970 s in the lower Yangtze region and its neighboring area were reviewed in this paper,then the basic wave group features of those wide angle reflection / refraction record sections,and of the crustal structure are summarized. It shows that there were in total five clear wave groups on the record sections,which include the first arrival Pg,the reflection P1 from the bottom interface of the upper crust,the reflection P3 from the bottom interface of the middle crust,the strong reflection Pm from the Moho boundary,and the refraction Pn from uppermost mantle. In general,these phases are easily consistently traced and compared,despite some first arrivals being delayed or arriving earlier than normal due to the shallow sedimentary cover or bedrocks. In particular,in the Dabie Mountain region the seismic events of a few gathered shots always have weak reflection energy,are twisted,or exhibit disorganized waveforms, which could be attributed to the disruption variations of reflection depth,the broken Moho,and the discontinuity of the reflection boundary within crust. The regional crustal structures are composed of the upper,middle and lower crust,of which the middle and lower layers can be divided into two weak reflection ones. The crustal thickness of the North China and Yangtze platform are 30km- 36 km,and the Moho exhibits a flat geometry despite some local uplifts. The average pressure velocity in lower crust beneath this two tectonic area is 6. 7 ± 0. 3km / s. Nevertheless,beneath the Dabieshan area the crustal thickness is 32km- 41 km,the Moho bends down sharply andtakes an abrupt 4km- 7km dislocation in the vertical direction. The average pressure velocity in the lower crust beneath the Dabieshan area is 6. 8 ± 0. 2km / s.  相似文献   

6.
Rayleigh wave phase velocities of South China block and its adjacent areas   总被引：2，自引：0，他引：2  
Using records of continuous seismic waveforms from 609 broadband seismic stations in the South China Block and its adjacent areas in 2010–2012, empirical Green's functions of surface waves were obtained from cross-correlation functions of ambient noise data between these stations. High quality phase velocity dispersion curves of Rayleigh waves were obtained using time-frequency analysis. These interstation dispersion curves were then inverted to build Rayleigh wave phase velocity maps at periods of 6–50 s. The results of phase velocity maps indicate that phase velocities at 6–10 s periods are correlated with the geological features in the upper crust. Major basins and small-scale grabens and basins display slow velocity anomalies; while most of the orogenic belts and the fold belts display high velocity anomalies. With the gravity gradient zone along Taihang Mountain to Wuling Mountain as the boundary for the phase velocity maps at period of 20–30 s, the western area mainly displays low velocity anomalies, while the eastern side shows high velocity anomalies. Phase velocities in the eastern South China Block south to the Qinling-Dabie orogenic belt is higher than that in the eastern North China Block to the north, which is possibly due to the differences of tectonic mechanisms between the North China Craton and the South China Block. The phase velocities at periods of40–50 s are possibly related to the lateral variations of the velocity structure in the lower crust and upper mantle: The low-velocity anomalies in the eastern part of the Tibetan Plateau are caused by the thick crust; while the Sichuan Basin and the southern part of the Ordos Basin display distinct high-velocity anomalies, reflecting the stable features of the lithosphere in these blocks. The lateral variation pattern of phase velocities in the southern part of the South China Block is not consistent with the surface trace of the block boundary in the eastern Yunnan Province and its vicinities. The phase velocities in the Sichuan Basin are overall slow at short periods and gradually increase with period from the central part to the edge of the basin, indicating the features of shallower basement in the center and overall stable lithospheric mantle of the basin. The middle and upper crust of the southern Ordos Basin in the North China Block is heterogeneous, while in lower crust and the uppermost mantle the phase velocities mainly exhibit high anomalies. High-velocity anomalies are widespread at the middle of the Qinling-Dabie orogenic belt, as well as the areas in southeastern Guangxi with Caledonian granite explosion, but its detailed mechanism is still unclear.  相似文献   

7.
We present the 1-D crustal velocity structure of the major tectonic blocks of the North China Craton(NCC) along 36°N based on synthetic seismogram modeling of long-range wide-angle reflection/refraction data. This profile extends from southwest Yan'an of central Shaanxi Province of China(109.47°E), across the southern Trans-North China Orogen(TNCO), the southwestern part of the North China Plain(NCP), the Luxi Uplift(LU) and the Sulu Orogen(SLO), ending at Qingdao City of Shandong Province, the eastern margin of China(120.12°E) along 36°N. We utilized reflectivity synthetic seismogram modeling of the active source data to develop 1-D velocity structures of the sub-blocks of the NCC. Our final model shows that the NCC crust varies remarkably among the tectonic units with different velocity structure features. Higher lower crustal velocity and Moho depth ～42 km is a major feature of the crust beneath southern Ordos Blockt. The TNCO which is composed of Lyuliangshan Mountains(LM), Shanxi Graben(SXG) and Taihangshan Mountains(TM) shows dominant trans-orogenic features. The NCP shows a dominant thickening of sediments, sharp crust thinning with Moho depth ～32 km and significant lower average velocity. The SLO and the LU shows a stratified crust, higher average velocity and crust thinning with Moho depth of ～35 km. Our model shows the coincidence between the deep structure and the surface geology among all the tectonic sub-blocks of the NCC.  相似文献   

8.
Using seismic data of about one year recorded by 18 broadband stations of ASCENT project,we obtained 2547 receiver functions in the northeastern Tibetan Plateau.The Moho depths under 14 stations were calculated by applying the H-κ domain search algorithm.The Moho depths under the stations with lower signal-noise ratio(SNR) were estimated by the time delay of the PS conversion.Results show that the Moho depth varies in a range of ~40–60 km.The Moho near the Haiyuan fault is vague,and its depth is larger than those on its two sides.In the Qinling-Qilian Block,the Moho becomes shallower gradually from west to east.To the east of 105°E,the average depth of the Moho is 45 km,whereas the west is 50 km or even deeper.Combining our results with surface wave research,we suggest a boundary between the Qinling and the Qilian Mountains at around 105°E.S wave velocities beneath 15 stations have been obtained through a linear inversion by using Crust2.0 as an initial model,and the crustal thickness that was derived by H-κ domain search algorithm was also taken into account.The results are very similar to the results of previous active source studies.The resulting figure indicates that low velocity layers developed in the middle and lower crust beneath the transition zone of the Tibet Block and western Qinling,which may be related to regional faults and deep earth dynamics.The velocity of the middle and lower crust increases from the Songpan Block to the northeastern margin of Tibetan Plateau.Based on the velocity of the crust,the distribution of the low velocity zone and the composition of the curst(Poisson's ratio),we infer that the crust thickening results from the crust shortening along the direction of compression.  相似文献   

9.
Swarms of mafic-intermediate volcaniclastic bodies occur in the Minggang region of Henan Province, a tectonic boundary between the North Qinling and the North China Block, and emplaced at (178.31±3.77) Ma. These volcanic rocks are subalkaline basaltic andesites and contain abundance of lower crust and mantle xenoliths. Thus this area is an ideal place to reveal the lithospheric composition and structure beneath the northern margin of the Qinling orogenic belt. Geochemical data indicate that these mafic granulites, eclogites and metagabbros have trace elemental and Pb isotopic characteristics very similar to those rocks from the South Qinling Block, representing the lower part of lower crust of the South Qinling which subducted beneath the North China Block. Talcic peridotites represent the overlying mantle wedge materials of the North China Block, which underwent the metasomatism of the acidic melt/fluid released from the underlying lower crust of the South Qinling Block. Deep tectonic model proposed i  相似文献   

10.
The seismic data obtained from high resolution seismic refraction profile in Jiashi strong earthquake swarm area in Xinjiang, China were further processed with ray hit analysis method and more complete basement interface struc-tural characteristics beneath Jiashi strong earthquake swarm area were determined. The results show that there are two clear basement interfaces at the upper crust in Jiashi strong earthquake swarm area. The first one with buried depth ranging from 2.6 km to 3.3 km presents integral and continuous structure, and it appears an inclined plane interface and smoothly rises up toward Tianshan Mountain. The second basement interface with buried depth from 8.5 km to 11.8 km, is the antiquated crystalline basement of Tarim basin. Near the post number of 37 km, the bur-ied depth of the crystalline basement changed abruptly by 2.5 km, which maybe result from an ultra crystalline basement fault. If taking this fault as a boundary, the crystalline basement could be divided into two parts, i.e. the southwestern segment with buried depth about 11.5 km, and the northeastern segment with buried depth approxi-mately from 8.5 km to 9.0 km. That is to say, in each segment, the buried depth changes not too much. The north-east segment rises up as a whole and upheaves slightly from southwest to northeast, which reflects the upper crustal deformation characteristics under the special tectonic background at the northwestern edge of Tarim basin.  相似文献   

11.
The authors processed the seismic refraction Pg-wave travel time data with finite difference tomography method and revealed velocity structure of the upper crust on active block boundaries and deep features of the active faults in western Sichuan Province. The following are the results of our investigation. The upper crust of Yanyuan basin and the Houlong Mountains consists of the superficial low-velocity layer and the deep uniform high-velocity layer, and between the two layers, there is a distinct, and gently west-dipping structural plane. Between model coordinates 180-240 km, P-wave velocity distribution features steeply inclined strip-like structure with strongly non-uniform high and low velocities alternately. Xichang Mesozoic basin between 240 and 300 km consists of a thick low-velocity upper layer and a high-velocity lower layer, where lateral and vertical velocity variations are very strong and the interface between the two layers fluctuates a lot. The Daliang Mountains to the east of the 300 km coordinate is a non-uniform high-velocity zone, with a superficial velocity of approximately 5 km/s. From 130 to 150 km and from 280 to 310 km, there are extremely distinct deep anomalous high-velocity bodies, which are supposed to be related with Permian magmatic activity. The Yanyuan nappe structure is composed of the superficial low-velocity nappe, the gently west-dipping detachment surface and the deep high-velocity basement, with Jinhe-Qinghe fault zone as the nappe front. Mopanshan fault is a west-dipping low-velocity zone, which extends to the top surface of the basement. Anninghe fault and Zemuhe fault are east-dipping, tabular-like, and low-velocity zones, which extend deep into the base-ment. At a great depth, Daliangshan fault separates into two segments, which are represented by drastic variation of velocity structures in a narrow strip: the west segment dips westward and the east segment dips eastward, both stretching into the basement. The east margin fault of Xichang Mesozoic basin features a strong velocity gradient zone, dipping southwestward and stretching to the top surface of the basement. The west-dipping, tabular-like, and low-velocity zone at the easternmost segment of the profile is a branch of Mabian fault, but the reliability of the supposition still needs to be confirmed by further study. Anninghe, Zemuhe and Daliangshan faults are large active faults stretching deep into the basement, which dominate strong seismic activities of the area.  相似文献   

12.
We have studied the characteristics of the active faults and seismicity in the vicinity of Urumqi city, the capital of Xinjiang Autonomous Region, China, and have proposed a seismogenic model for the assessment of earthquake hazard in this area. Our work is based on an integrated analysis of data from investigations of active faults at the surface, deep seismic reflection soundings,seismic profiles from petroleum exploration, observations of temporal seismic stations, and the precise location of small earthquakes. We have made a comparative study of typical seismogenic structures in the frontal area of the North Tianshan Mountains, where Urumqi city is situated,and have revealed the primary features of the thrust-foldnappe structure there. We suggest that Urumqi city is comprised two zones of seismotectonics which are interpreted as thrust-nappe structures. The first is the thrust nappe of the North Tianshan Mountains in the west, consisting of the lower(root) thrust fault, middle detachment,and upper fold-uplift at the front. Faults active in the Pleistocene are present in the lower and upper parts of this structure, and the detachment in the middle spreads toward the north. In the future, M7 earthquakes may occur at the root thrust fault, while the seismic risk of frontal fold-uplift at the front will not exceed M6.5. The second structure is the western flank of the arc-like Bogda nappe in the east,which is also comprised a root thrust fault, middle detachment, and upper fold-uplift at the front, of which the nappe stretches toward the north; several active faults are also developed in it. The fault active in the Holocene is called the South Fukang fault. It is not in the urban area of Urumqi city. The other three faults are located in the urban area and were active in the late Pleistocene. In these cases,this section of the nappe structure near the city has an earthquake risk of M6.5–7. An earthquake M_S6.6, 60 km east to Urumqi city occurred along the structure in 1965.  相似文献   

13.
Time range of Mesozoic tectonic regime inversion in eastern North China Block   总被引：49，自引：9，他引：49  
An important tectonic inversion took place in eastern North China Block(NCB) during Mesozoic, which caused a great lithosphere thinning, reconstruction of basin-range series, powerful interaction between mantle and crust, a vast granitic intrusion and volcanism, and large-scale metallogenic explosion. The time range of the Mesozoic tectonic regime inversion in the eastern North China Block is one of the key issues to understand mechanism of tectonic regime inversion. Our updated results for recognizing the time range are mainly obtained from the following aspects: structural analyses along northern and southern margins of the NCB and within the NCB for revealing tectonic inversion from compression to extension and structural striking from -EW to NNE; geothermic analyses of the eastern sedimental basins for a great change of thermal history and regime; basin analysis for basin inversion from compression to extension and basin migration from -EW to NNE; petrological and geochemical studies of volcanic roc  相似文献   

14.
High-resolution P wave tomography shows that the subducting Pacific slab is stagnant in the mantle transition zone and forms a big mantle wedge beneath eastern China. The Mg isotopic investigation of large numbers of mantle-derived volcanic rocks from eastern China has revealed that carbonates carried by the subducted slab have been recycled into the upper mantle and formed carbonated peridotite overlying the mantle transition zone, which becomes the sources of various basalts. These basalts display light Mg isotopic compositions(δ26 Mg = –0.60‰ to –0.30‰) and relatively low87 Sr/86 Sr ratios(0.70314–0.70564) with ages ranging from 106 Ma to Quaternary, suggesting that their mantle source had been hybridized by recycled magnesite with minor dolomite and their initial melting occurred at 300-360 km in depth. Therefore, the carbonate metasomatism of their mantle source should have occurred at the depth larger than 360 km, which means that the subducted slab should be stagnant in the mantle transition zone forming the big mantle wedge before 106 Ma. This timing supports the rollback model of subducting slab to form the big mantle wedge. Based on high P-T experiment results, when carbonated silicate melts produced by partial melting of carbonated peridotite was raising and reached the bottom(180–120 km in depth) of cratonic lithosphere in North China, the carbonated silicate melts should have 25–18 wt% CO2 contents, with lower Si O2 and Al2 O3 contents, and higher Ca O/Al2 O3 values, similar to those of nephelinites and basanites, and have higher εNdvalues(2 to 6). The carbonatited silicate melts migrated upward and metasomatized the overlying lithospheric mantle, resulting in carbonated peridotite in the bottom of continental lithosphere beneath eastern China. As the craton lithospheric geotherm intersects the solidus of carbonated peridotite at 130 km in depth, the carbonated peridotite in the bottom of cratonic lithosphere should be partially melted, thus its physical characters are similar to the asthenosphere and it could be easily replaced by convective mantle. The newly formed carbonated silicate melts will migrate upward and metasomatize the overlying lithospheric mantle. Similarly, such metasomatism and partial melting processes repeat, and as a result the cratonic lithosphere in North China would be thinning and the carbonated silicate partial melts will be transformed to high-Si O2 alkali basalts with lower εNdvalues(to-2). As the lithospheric thinning goes on,initial melting depth of carbonated peridotite must decrease from 130 km to close 70 km, because the craton geotherm changed to approach oceanic lithosphere geotherm along with lithospheric thinning of the North China craton. Consequently, the interaction between carbonated silicate melt and cratonic lithosphere is a possible mechanism for lithosphere thinning of the North China craton during the late Cretaceous and Cenozoic. Based on the age statistics of low δ26 Mg basalts in eastern China, the lithospheric thinning processes caused by carbonated metasomatism and partial melting in eastern China are limited in a timespan from 106 to25 Ma, but increased quickly after 25 Ma. Therefore, there are two peak times for the lithospheric thinning of the North China craton: the first peak in 135-115 Ma simultaneously with the cratonic destruction, and the second peak caused by interaction between carbonated silicate melt and lithosphere mainly after 25 Ma. The later decreased the lithospheric thickness to about70 km in the eastern part of North China craton.  相似文献   

15.
Mesozoic tectono-magmatic activities in South China:Retrospect and prospect   总被引：9，自引：0，他引：9  
The South China Block was formed through the collisional orogeny between the Cathaysia Block and the Yangtze Block in the Early Neoproterozoic.The northern,western and southern sides of the South China Block were affected by disappearance of the Paleo-Tethyan Ocean during the Paleozoic.The southern and northern sides of the South China Block were respectively collided with the Indo-China Block and North China Block in the latest Paleozoic to form the basic framework of the Eastern China.The Eastern China has been affected by the westward subduction of the Pacific Plate since the Mesozoic.Therefore,the South China Block was influenced by the three major tectonic systems,leading to a superposed compound tectonics.The comparative study of the Mesozoic geology between the South China Block and its surrounding areas suggests that although the Mesozoic South China Block was adjacent to the subduction zone of the western Pacific,no juvenile arc-type crust has been found in the eastern margin.The main Mesozoic geology in South China is characterized by reworking of ancient continental margins to intracontinental tectonics,lacking oceanic arc basalts and continental arc andesites.Therefore,a key to understanding of the Mesozoic geology in South China is to determine the temporal-spatial distribution and tectonic evolution of Mesozoic magmatic rocks in this region.This paper presents a review on the tectonic evolution of the South China Block through summarizing the magmatic rock records from the compressional to extensional tectonic process with the transition at the three juncture zones and using the deformation and geophysic data from the deep part of the South China continental lithosphere.Our attempt is to promote the study of South China’s geology and to make it as a typical target for development of plate tectonic theory.  相似文献   

16.
The crustal S-velocity structure and radial anisotropy along a dense linear portable seismic array with 64 broadband seismic stations were investigated from ambient noise tomography with about one-year-long ambient noise recordings. The array transverses the southern part of the central North China Craton(CNCC) and western NCC(WNCC) from east to west and reaches the adjacent Qilian Orogenic Belt(QOB). The phase velocity structures of Rayleigh waves at 5–35 s and Love waves at 5–30 s were measured. The crustal S-velocity structures(Vsv and Vsh) were constructed from the dispersion data(Rayleigh and Love waves,respectively) from point-wise linear inversion with prior information of the Moho depth and average crustal Vp/Vs ratio. The radial anisotropy along the profile was calculated based on the discrepancies between Vsv and Vsh as 2×(Vsh.Vsv)/(Vsh+Vsv). The results show distinct structural variations in the three major tectonic units. The crustal architecture in the southern CNCC is complicated and featured with wide-distributed low-velocity zones(LVZs), which may be a reflection of crustal modification resulting from Mesozoic-Cenozoic tectonics and magmatic activities. The pronounced positive radial anisotropy in the lower-lowermost crust beneath the Shanxi-Shaanxi Rift and the neighboring areas could be attributed to the underplating of mantle mafic-ultramafic materials during the Mesozoic-Cenozoic tectonic activation. In southern Ordos, the overall weak lateral velocity variations, relative high velocity and large-scale positive radial anisotropy in mid-lower crust probably suggest that the current crustal structure has preserved its Precambrian tectonic characteristics. The low-velocity westward-dipping sedimentary strata in the Ordos Block could be attributed to the Phanerozoic whole-basin tilting and the uneven erosion since late Cretaceous. Integrated with previous studies, the systematic comparison of crustal architecture was made between the southern and northern part of CNCC-WNCC. The similarities and differences may have a relation with the tectonic events and deformation histories experienced before and after the Paleoproterozoic amalgamation of the NCC. The nearly flat mid-crustal LVZ beneath the southern QOB weakens gradually as it extends to the east, which is a feature probably associated with crustal vertical superpositionand ductile shear deformation under the intensive compressional regime due to the northeastward growth and expansion of the Tibetan Plateau.  相似文献   

17.
<正>The Qinghai-Tibetan Plateau(QTP) is well known as the Roof of the World, the Third Pole and the Asian Water Tower. It spans a vast area from the Pamir Plateau in the west to the Longmenshan-Hengduan Mountains in the east, from the Himalaya Mountains in the south to the Kunlun-Qilian Mountains in the north. It stretches approximately 1,200 km from north to south and 2,500 km from east to west. When did the QTP start to uplift? This is still controversial between early and late Cenozoic s...  相似文献   

18.
Although Tanlu fault is one of the most important tectonic fault zones and active earthquake belts in eastern China, little is known about its deep structure. In this study, we use the existing Bouguer gravity data to study the middle section of the Tanlu fault zone, which is also known as the Yishu fault zone. Our gravity inversion results indicate that the Moho has an abrupt offset in depth at the Tanlu fault zone and it has a relatively smooth variation away from the fault zone. The crustal structures on both sides are different from each other. Sediment is thin on the west side with an average thickness of less than 5 km, while it is as thick as 6 km on the east side. The thinnest sediment （3-4 km） is at the fault zone. Moho depth increases from 33 to 34 km on east side and from 36 to 38 km on west side. Tanlu fault zone is shown as a wide zone of linear gradient in the Bouguer gravity anomaly.  相似文献   

19.
The transitional area between the northeastern margin of the Qinghai-Tibetan Plateau, Ordos Block and Alxa Block,also being the northern segment of the North-South Seismic Belt, is characterized by considerably high seismicity level and high risk of strong earthquakes. In view of the special tectonic environment and deep tectonic setting in this area, this study used two seismic wide-angle reflection/refraction cross profiles for double constraining, so as to more reliably obtain the fine-scale velocity structure characteristics in both the shallow and deep crust of individual blocks and their boundaries in the study area,and further discuss the seismogenic environment in seismic zones with strong historical earthquakes. In this paper, the P-wave data from the two profiles are processed and interpreted, and two-dimensional crustal velocity structure models along the two profiles are constructed by travel time forward modeling. The results show that there are great differences in velocity structure,shape of intra-crustal interfaces and crustal thickness among different blocks sampled by the two seismic profiles. The crustal thickness along the Lanzhou-Huianbu-Yulin seismic sounding profile(L1) increases from ~43 km in the western margin of Ordos Block to ~56 km in the Qilian Block to the west. In the Ordos Block, the velocity contours vary gently, and the average velocity of the crust is about 6.30 km s-1; On the other hand, the velocity structures in the crust of the Qilian Block and the arclike tectonic zone vary dramatically, and the average crustal velocities in these areas are about 0.10 km s-1 lower than that of the Ordos Block. In addition, discontinuous low-velocity bodies(LVZ1 and LVZ2) are identified in the crust of the Qilian Block and the arc-like tectonic zone, the velocity of which is 0.10–0.20 km s-1 lower than that of the surroundings. The average crustal thickness of the Ordos Block is consistently estimated to be around 43 km along both Profile L2(Tongchuan-Huianbu-Alashan left banner seismic sounding profile) and Profile L1. In contrast to the gently varying intra-crustal interfaces and velocity contours in the Ordos Block along Profile L1, which is a typical structure characteristic of stable cratons, the crustal structure in the Ordos Block along Profile L2 exhibits rather complex variations. This indicates the presence of significant structural differences in the crust within the Ordos Block. The crustal structure of the Helan Mountain Qilian Block and the Yinchuan Basin is featured by "uplift and depression" undulations, showing the characteristics of localized compressional deformation.Moreover, there are low-velocity zones with alternative high and low velocities in the middle and lower crust beneath the Helan Mountain, where the velocity is about 0.15–0.25 km s-1 lower than that of the surrounding areas. The crustal thickness of the Alxa Block is about 49 km, and the velocity contours in the upper and middle-lower crust of the block vary significantly. The complex crustal velocity structure images along the two seismic sounding profiles L1 and L2 reveal considerable structural differences among different tectonic blocks, their coupling relationships and velocity structural features in the seismic zones where strong historical earthquakes occurred. The imaging result of this study provides fine-scale crustal structure information for further understanding the seismogenic environment and mechanism in the study area.  相似文献   

20.
The Tianshan Tectonic Belt is an intracontinental orogenic belt formed by continental convergence that has undergone long-term tectonic evolution. The reactivation that began during the Cenozoic Period has led to complex structural changes. The goals of this study are to review the seismic observational data obtained during 2009–2019 in the Xinjiang regional seismic network and analyze the anisotropy of the upper crust in the Tianshan area. Therefore, a shear-wave splitting system was adopted to collect and analyze shear-wave splitting parameters of 33 stations in the study area. The anisotropy of the upper crust of the Tianshan is spatially diverse, and the dominant polarization directions of fast shear-wave reflect the spatial variations of regional tectonic stress. In addition, the time delays of slow waves are proportional to the intensities of anisotropy in the upper crustal medium. The dominant polarization direction of the fast waves in the western segment of the North Tianshan Mountain,northwestern corner of the Tarim Basin, and northeastern edge of Pamir is consistent with the tectonic stress fields in the area. In the northern part of the Keping Block, the dominant polarization directions of the fast waves are consistent with the fault trends;however, they are at a high angle to the dominant directions of the regional tectonic stress field indicating that the anisotropy is affected by the faults in the area. The anisotropy of the eastern segment of the South Tianshan Mountains and the surrounding area of Urumqi are affected by the local stress field and fault structure. The polarization directions at some of the stations are subparallel to the directions of the regional principal stress. However, for other stations, the polarization directions are aligned with the neighboring faults. The polarization directions of the fast waves in most of the study area are consistent with the local tectonic stress fields. Thus, stress compression phenomena such as the Tarim Basin being thrusted and subducted between the Tianshan crust and the upper mantle due to the far field effects of the convergence between the Indian and Siberian plates are evident.Furthermore, the zoning of the time delays is distinct, and the time delays share an increasing trend from east to west in the North Tianshan and South Tianshan Mountain ranges. These results are consistent with the north-south convergence deformations across the Tianshan Mountains, where the deformation rate increased from east to west. The average values of time delays in northeastern Pamir are significantly higher than that in the other areas due to the occurrence of the most intensive tectonic movements suggesting that the anisotropy of the zone is significantly stronger than that of the other zones in the Tianshan Tectonic Belt. We successfully deciphered the seismic anisotropy in the upper crust and provided a comprehensive and systematic understanding of the dynamic mechanisms of the Tianshan Tectonic Belt.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号