首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 171 毫秒
1.
Yan  Zhiyong  Chen  Lin  Xiong  Xiong  Wang  Kai  Xie  Renxian  Hsu  Hou Tze 《中国科学:地球科学(英文版)》2020,63(8):1069-1091
Flat subduction refers to low-angle(10°) or sub-horizontal subduction of oceanic slabs. Flat subduction is only recognized in ~10% of present-day subduction zones, but its impact on the behavior of the overriding plate is particularly strong.For example, flat subduction zones are typically associated with stronger earthquakes. The deformation caused by typical flat subduction will transfer from the trench to the overriding continental interior and form a broad magma belt. The formation mechanism of flat subduction has been linked to the relative buoyancy of subducted oceanic plateaus, overthrusting of the overriding plate, hydrodynamic suction, and trench retreat. However, these mechanisms remain debated. This paper systematically analyzes and summarizes previous studies on flat subduction, and outlines the possible geological effects of flat subduction, such as intracontinental orogeny and magmatism. Using examples from numerical modeling, we discuss the possible formation mechanisms. The most important factors that control the formation of flat subduction are associated with overthrusting of the overriding plate and the arrival of an oceanic plateau at the subduction zone. In addition, trench retreat is necessary to enable flat subduction. Hydrodynamic suction contributes to the reduction of the slab dip angle, but is insufficient to form flat subduction. Future numerical modeling of flat subduction should carry out three-dimensional high-resolution thermo-mechanical simulation, considering the influence of crustal eclogitization(negative buoyancy) and mantle serpentinization(positive buoyancy) of oceanic lithosphere, in combination with geological and geophysical data.  相似文献   

2.
Continental orogens on Earth can be classified into accretionary orogen and collisional orogen.Magmatism in orogens occurs in every periods of an orogenic cycle,from oceanic subduction,continental collision to orogenic collapse.Continental collision requires the existence of prior oceanic subduction zone.It is generally assumed that the prerequisite of continental deep subduction is oceanic subduction and its drag force to the connecting passive-margin continental lithosphere during continental collision.Continental subduction and collision lead to the thickening and uplift of crust,but the formation time of the related magmatism in orogens depends on the heating mechanism of lithosphere.The accretionary orogens,on the other hand,have no strong continental collision,deep subduction,no large scale of crustal thrusting,thickening and uplift,and no UHP eclogite-facies metamorphic rocks related to continental deep subduction.Even though arc crust could be significantly thickened during oceanic subduction,it is still doubtful that syn-or post-collisional magmatism would be generated.In collisional orogens,due to continental deep subduction and significant crustal thickening,the UHP metamorphosed oceanic and continental crusts will experience decompression melting during exhumation,generating syn-collisional magmatism.During the orogen unrooting and collapse,post-collisional magmatism develops in response to lithosphere extension and upwelling of asthenospheric mantle,marking the end of an orogenic cycle.Therefore,magmatism in orogens can occur during the continental deep subduction,exhumation and uplift after detachment of subducted oceanic crust from continental crust,and extensional collapse.The time span from continental collision to collapse and erosion of orogens(the end of orogenic cycle)is 50–85 Myr.Collisional orogens are the key sites for understanding continental deep subduction,exhumation,uplift and orogenic collapse.Magmatism in collisional orogens plays important roles in continental reworking and net growth.  相似文献   

3.
Introduction It is found that there are some relationships between the thermal structures of subduction zones and the deep seismicity, while the mechanism relates the thermal structure and the deep seismicity is still unsure (Helffrich, Brodholt, 1991; Furukawa, 1994; Kirby, et al, 1996). From 1980s, geoscientists have constituted a series of numerical simulations on the stress states of subduction slabs. Based on the kinetic computation of Sung and Burns (1976a, b), Goto, et al (1983, 1987…  相似文献   

4.
Continental subduction and collision normally follows oceanic subduction,with the remarkable event of formation and exhumation of high-to ultra-high-pressure(HP-UHP)metamorphic rocks.Based on the summary of numerical geodynamic models,six modes of continental convergence have been identified:pure shear thickening,folding and buckling,one-sided steep subduction,flat subduction,two-sided subduction,and subducting slab break-off.In addition,the exhumation of HP-UHP rocks can be formulated into eight modes:thrust fault exhumation,buckling exhumation,material circulation,overpressure model,exhumation of a coherent crustal slice,episodic ductile extrusion,slab break-off induced eduction,and exhumation through fractured overriding lithosphere.During the transition from subduction to exhumation,the weakening and detachment of subducted continental crust are prerequisites.However,the dominant weakening mechanisms and their roles in the subduction channel are poorly constrained.To a first degree approximation,the mechanism of continental subduction and exhumation can be treated as a subduction channel flow model,which incorporates the competing effects of downward Couette(subduction)flow and upward Poiseuille(exhumation)flow in the subduction channel.However,the(de-)hydration effect plays significant roles in the deformation of subduction channel and overriding lithosphere,which thereby result in very different modes from the simple subduction channel flow.Three-dimensionality is another important issue with highlighting the along-strike differential modes of continental subduction,collision and exhumation in the same continental convergence belt.  相似文献   

5.
Accurately characterizing the three-dimensional geometric contacts between the crust of the Chinese mainland and adjacent regions is important for understanding the dynamics of this part of Asia from the viewpoint of global plate systems.In this paper,a method is introduced to investigate the geometric contacts between the Eurasian and Indian plates at the Burma arc subduction zone using earthquake source parameters based on the Slab1.0 model of Hayes et al.(2009,2010).The distribution of earthquake focus depths positioned in 166 sections along the Burma Arc subduction zone boundary has been investigated. Linear plane fitting and curved surface fitting has been performed on each section.Three-dimensional geometric contacts and the extent of subduction are defined quantitatively.Finally,the focal depth distribution is outlined for six typical sections along the Burma arc subduction zone,combining focal mechanisms with background knowledge of geologic structure.Possible dynamic interaction patterns are presented and discussed.This paper provides an elementary method for studying the geometric contact of the Chinese mainland crust with adjacent plates and serves as a global reference for dynamic interactions between plates and related geodynamic investigations.  相似文献   

6.
Based on the updated results of experimental petrology and phase equilibria modelling and combined with the available thermal structure models of subduction zones, this paper presents an overview on the dehydration and melting of basic,sedimentary and ultrabasic rocks that occur in the different stages during oceanic subduction processes and their influences on magmatism above subduction zones. During the subduction at the forearc depth of <90–100 km, the basic and ultrabasic rocks from most oceanic slabs can release very small amounts of water, and significant dehydration may occur in the slab superficial sediments. Strong dehydration occurs in both basic and ultrabasic rocks during subduction at the subarc depth of 90–200 km. For example, more than 90% water in basic rocks is released by the successive dehydration of chlorite, glaucophane, talc and lawsonite in the subarc depths. This is diversely in contrast to the previous results from synthetic experiments. Ultrabasic rocks may undergo strong dehydration through antigorite, chlorite and phase 10 ? at the subarc depth of 120–220 km. However,sediments can contribute minor fluids at the subarc depth, one main hydrous mineral in which is phengite(muscovite). It can stabilize to ~300 km depth and transform into K-hollandite. After phengite breaks down, there will be no significant fluid release from oceanic slab until it is subducted to the mantle transition zone. In a few hot subduction zones, partial melting(especially flux melting) can occur in both sediments and basic rocks, generating hydrous granitic melts or supercritical fluids, and in carbonates-bearing sediments potassic carbonatite melts can be generated. In a few cold subduction zones, phase A occurs in ultrabasic rocks, which can bring water deep into the transition zone. The subducted rocks, especially the sediments, contain large quantities of incompatible minor and trace elements carried through fluids to greatly influence the geochemical compositions of the magma in subduction zones. As the geothermal gradients of subduction zones cannot cross the solidi of carbonated eclogite and peridotite during the subarc subduction stage, the carbonate minerals in them can be carried into the deep mantle.Carbonated eclogite can melt to generate alkali-rich carbonatite melts at >400 km depth, while carbonated peridotite will not melt in the mantle transition zone below a subduction zone.  相似文献   

7.
Introduction Through studying ″foreshock″ and sequence features of strong earthquakes with focal mechanism of strike-slip or thrust occurred in the shallow subduction zone or in the continental thrust belt respectively, Reasenberg (1999) suggested that precursory representation and the se- quence features are related tightly to the rupture mechanism of the mainshock. This implies that the rupture pattern of the mainshock is probably one of the important factors affecting the features of afte…  相似文献   

8.
Xu Jie 《中国地震研究》2006,20(1):101-107
The Indonesian region is one of the most seismically active zones on the earth. On December 26, 2004, an Ms 8.7 earthquake (as measured by the China Seismograph Network, or Mw = 9.3 as measured by USGS) struck the west coast of northern Sumatra, Indonesia. By its magnitude it is classified as the world's fourth largest earthquake since 1900 and the largest one since the 1964 Alaska earthquake. The spatial distribution of the relocation of larger aftershocks ( M 〉 4.5) following the main shock suggests a length and width of the rupture of about 1200km and 200km, respectively. The shock triggered massive tsunamis that affected several countries throughout South and Southeast Asia. It is a shallow interplate event of thrust type in the trench. Its epicenter is located at the northwestern end of the Indonesia-Melanesia plate boundary tectonic zone. In 2004, eight shocks of M≥ 7.0 occurred in this area, showing a migration from east to west. It implies that these shocks represent a correlated and consistent dynamic process along this subduction zone. These interplate events are associated with convergence of several plates and their fast motion in this region, which result in strong and complex structures and deformation. The India-Australia plate is underthrusting toward the Sunda continental block or Burma plate at a low angle, producing a great locked area on the shallow portion of the subduction zone where enormous strain is accumulated. Interseismic uplift recorded by coral growth and horizontal velocities measured by GPS show the geometry of the locked portion of the Sumatra subduction zone. The vertical and horizontal data reasonably match with a model in which the plate interface is fully locked over a significant width. This locked fault zone extends to a horizontal distance of 132km from the trench, which corresponds to a depth of 50km. The sudden ruptures and large-scale slip of this locked area as a release of stress occurred, are the direct cause of the M8.7 earthquake near Indonesia in 2004.  相似文献   

9.
Wang  Qiang  Tang  Gongjian  Hao  Lulu  Wyman  Derek  Ma  Lin  Dan  Wei  Zhang  Xiuzheng  Liu  Jinheng  Huang  Tongyu  Xu  Chuanbing 《中国科学:地球科学(英文版)》2020,63(10):1499-1518
Modern oceans contain large bathymetric highs(spreading oceanic ridges, aseismic ridges or oceanic plateaus and inactive arc ridges) that, in total, constitute more than 20–30% of the total area of the world's ocean floor. These bathymetric highs may be subducted, and such processes are commonly referred to as ridge subduction. Such ridge subduction events are not only very common and important geodynamic processes in modern oceanic plate tectonics, they also play an important role in the generation of arc magmatism, material recycling, the growth and evolution of continental crust, the deformation and modification of the overlying plates, and metallogenesis at convergent plate boundaries. Therefore, these events have attracted widespread attention. The perpendicular or high-angle subduction of mid-ocean spreading ridges is commonly characterized by the occurrence of a slab window, and the formation of a distinctive adakite–high-Mg andesite–Nb-enriched basalt-oceanic island basalt(OIB) or a mid-oceanic ridge basalt(MORB)-type rock suite, and is closely associated with Au mineralization. Aseismic ridges or oceanic plateaus are traditionally considered to be difficult to subduct, to typically collide with arcs or continents or to induce flat subduction(low angle of less than 10°) due to the thickness of their underlying normal oceanic crust(6–7 km) and high topography. However, the subduction of aseismic ridges and oceanic plateaus occurred on both the western and eastern sides of the Pacific Ocean during the Cenozoic. On the eastern side of the Pacific Ocean, aseismic ridges or oceanic plateaus are being subducted flatly or at low angles beneath South and Central American continents, which may cause a magmatic gap. But slab melting can occur and adakites, or an adakite–high-Mg andesite–adakitic andesite–Nb-enriched basalt suite may be formed during the slab rollback or tearing. Cu-Au mineralization is commonly associated with such flat subduction events. On the western side of the Pacific Ocean, however, aseismic ridges and oceanic plateaus are subducted at relatively high angles(30°).These subduction processes can generate large scale eruptions of basalts, basaltic andesites and andesites, which may be derived from fractional crystallization of magmas originating from the subduction zone fluid-metasomatized mantle wedge. In addition,some inactive arc ridges are subducted beneath Southwest Japan, and these subduction processes are commonly associated with the production of basalts, high-Mg andesites and adakites and Au mineralization. Besides magmatism and Cu-Au mineralization,ridge subduction may also trigger subduction erosion in subduction zones. Future frontiers of research will include characterizing the spatial and temporal patterns of ridge subduction events, clarifying the associated geodynamic mechanisms, quantifying subduction zone material recycling, establishing the associated deep crustal and mantle events that generate or influence magmatism and Cu-Au mineralization, establishing criteria to recognize pre-Cenozoic ridge subduction, the onset of modernstyle plate tectonics and the growth mechanisms for Archean continental crust.  相似文献   

10.
The transport of water in subduction zones   总被引:9,自引:0,他引:9  
The transport of water from subducting crust into the mantle is mainly dictated by the stability of hydrous minerals in subduction zones. The thermal structure of subduction zones is a key to dehydration of the subducting crust at different depths. Oceanic subduction zones show a large variation in the geotherm, but seismicity and arc volcanism are only prominent in cold subduction zones where geothermal gradients are low. In contrast, continental subduction zones have low geothermal gradients, resulting in metamorphism in cold subduction zones and the absence of arc volcanism during subduction. In very cold subduction zone where the geothermal gradient is very low(?5?C/km), lawsonite may carry water into great depths of ?300 km. In the hot subduction zone where the geothermal gradient is high(25?C/km), the subducting crust dehydrates significantly at shallow depths and may partially melt at depths of 80 km to form felsic melts, into which water is highly dissolved. In this case, only a minor amount of water can be transported into great depths. A number of intermediate modes are present between these two end-member dehydration modes, making subduction-zone dehydration various. Low-T/low-P hydrous minerals are not stable in warm subduction zones with increasing subduction depths and thus break down at forearc depths of ?60–80 km to release large amounts of water. In contrast, the low-T/low-P hydrous minerals are replaced by low-T/high-P hydrous minerals in cold subduction zones with increasing subduction depths, allowing the water to be transported to subarc depths of 80–160 km. In either case, dehydration reactions not only trigger seismicity in the subducting crust but also cause hydration of the mantle wedge. Nevertheless, there are still minor amounts of water to be transported by ultrahigh-pressure hydrous minerals and nominally anhydrous minerals into the deeper mantle. The mantle wedge overlying the subducting slab does not partially melt upon water influx for volcanic arc magmatism, but it is hydrated at first with the lowest temperature at the slab-mantle interface, several hundreds of degree lower than the wet solidus of hydrated peridotites. The hydrated peridotites may undergo partial melting upon heating at a later time. Therefore, the water flux from the subducting crust into the overlying mantle wedge does not trigger the volcanic arc magmatism immediately.  相似文献   

11.
Heterogeneous δ18O values as low as - 2.6‰ to+7.0% are observed for ultrahigh pressure eclogites from the Dabie Mountains in East China. Oxygen isotope equilibrium has been approached between the eclogite minerals, suggesting that the rocks would have acquired the unusual δ18O values prior to ultrahigh pressure metamorphism by interaction with18O-depleted fluid. δD values of hydroxyl-bearing are between — 51% and - 83‰, precluding the possibility of paleoseawater involvement. The only likely fluid is ancient meteoric water that exchanged oxygen isotopes with the eclogite precursor (a kind of basaltic rocks) formerly resident on the continental crust. This suggests a crustal recycling process in the suture zone of late subduction. Because silicate minerals undergo rapid oxygen isotope exchange at mantle pressures, preservation of the isotopic signature of meteoric water in the eclogites indicates limited crust-mantle interaction and thus a short residence time (<20 Ma) when the plate containing the eclogite precursor was subducted to mantle depths. The agreement in oxygen isotope temperatures for different mineral pairs suggests a rapid cooling and ascent process for the eclogites subsequent to their formation at mantle depths. Project supported by the National Natural Science Foundation of China and the Chinese Academy of Sciences.  相似文献   

12.
地质学家基于岩石年代学、峰期变质的压力差和阿尔卑斯变质沉积岩中柯石英的发现,推断在大别造山带地区发现的柯石英和榴辉岩乃是地幔深处120km左右折返至地壳浅部的结果.为了提供大别造山带与郯庐断裂带地域的壳、幔深部结构与深层动力过程的定量判据,本文利用瑞利(Rayleigh)波的频散效应反演该区S波的三维群速度结构分布.研究结果表明:(1)该区存在一由东向西陆内俯冲的高速板舌,其下插深度仅达160 km.在秦岭—大别造山带地域上地幔70km深处存在一顶部宽约500km的低速地幔热点.(2)出露的含柯石英榴辉岩是大别造山带深部物质和能量的交换,郯庐断裂带强烈平移错动及板内俯冲效应共同作用导致的深部物质(上地幔)运移和动力学效应的综合产物.  相似文献   

13.
云南地壳和上地幔的岩石学结构   总被引:4,自引:0,他引:4       下载免费PDF全文
通过对地表出露变质岩、深部地震测深资料和高温高压岩石波速测试资料的综合分析 ,研究了云南地壳和上地幔岩石组成。结果表明 ,云南上、中、下地壳分别由绿片岩相 (顶部为沉积层 )、角闪岩相和麻粒岩相变质岩组成或分别由与之相当的花岗岩类、闪长岩类、辉长岩类组成 ,部分地区地壳底部有镁铁质榴辉岩存在。上地幔由橄榄岩组成 ,部分地区 (兰坪思茅坳陷和滇中坳陷 )壳幔过渡带可能由镁铁质榴辉岩和橄榄岩组成  相似文献   

14.

Zircon grains were selected from two types of ultrahigh-pressure (UHP) eclogites, coarse-grained phengite eclogite and fine-grained massive eclogite, in the Yukahe area, the western part of the North Qaidam UHP metamorphic belt. Most zircon grains show typical metamorphic origin with residual cores in some irregular grains and sector, planar or misty internal textures on the cathodoluminescence (CL) images. The contents of REE and HREE of the core parts of grains range from 173 to 1680 μg/g and 170 to 1634 μg/g, respectively, in phengite eclogite, and from 37 to 2640 μg/g and 25.7 to 1824 μg/g, respectively, in massive eclogite. The core parts exhibit HREE-enriched patterns, representing the residual zircons of protolith of the Yukahe eclogite. The contents of REE and HREE of the rim parts and the grains free of residual cores are much lower than those for the core parts. They vary from 13.1 to 89.5 μg/g and 12.5 to 85.7 μg/g, respectively, in phengite eclogite, and from 9.92 to 45.8 μg/g and 9.18 to 43.8 μg/g, respectively, in massive eclogite. Negative Eu anomalies and Th/U ratios decrease from core to rim. Positive Eu anomalies are shown in some grains. These indicate that the presence of garnet and the absence of plagioclase in the peak metamorphic mineral assemblage, and the zircons formed under eclogite facies conditions. LA-ICP-MS zircon U-Pb age data indicate that phengite eclogite and massive eclogite have similar metamorphic age of 436±3Ma and 431±4Ma in the early Paleozoic and magmatic protolith age of 783–793 Ma and 748–759 Ma in the Neo-proterozoic. The weighted mean age of the metamorphic ages (434±2 Ma) may represent the UHP metamorphic age of the Yukahe eclogites. The metamorphic age is well consistent with their direct country rocks of gneisses (431±3 Ma and 432±19 Ma) and coesite-bearing pelitic schist in the Yematan UHP eclogite section (423–440 Ma). These age data together with field observation and lithology, allow us to conclude that the Yukahe eclogites were Neo-proterozoic igneous rocks and may have experienced subduction and UHP metamorphism with continental crust at deep mantle during the early Paleozoic, therefore the metamorphic age of 434±2 Ma of the Yukahe eclogites probably represents the continental deep subduction time in this area.

  相似文献   

15.
南岭-武夷交汇区的深部背景及地壳泊松比   总被引:1,自引:0,他引:1       下载免费PDF全文
为研究南岭-武夷交汇区深部动力学过程提供深部背景资料和科学依据,本文利用远震P波接收函数H-κ叠加和共转换点(CCP)叠加两种方法获取了研究区66个宽频带流动台站及24个固定台站下方的地壳厚度、泊松比和Moho面起伏形态,揭示了扬子地块与华夏地块地壳结构及泊松比变化特征,给出了南岭和武夷之间一条莫霍凸起带的高分辨图像.
结果显示:(1)研究区内地壳厚度平均值为31.2 km,泊松比平均值为0.23,总体呈现薄地壳、低泊松比的特点.地壳厚度从西北往东南由厚变薄,与区域地壳伸展特征相一致.(2)在韶关-赣州-吉安-南昌一线存在条带状薄地壳结构,平均值为28 km,呈南西-北东向展布,对应的泊松比值略微升高.推测地壳减薄带的形成可能与来自南海方向的地幔热流上涌有关.(3)江南造山带的泊松比整体偏低,存在两处平均值小于0.21的区域.华夏地块内地壳厚度与泊松比之间存在弱的负相关,表示随着地壳厚度的增大,铁镁质的下地壳厚度在整个地壳厚度中所占的比例减小.  相似文献   

16.
The oxygen isotope composition of minerals from quartz veins and host eclogites in the Dabie terrane was measured in order to place geochemical constraints on the origin and transport of metamorphic fluid. The results are discussed together with structural and petrological relationships between quartz vein and wallrock. The quartz veins can be temporally classified into three groups: (1) synmetamorphic vein which would be formed prior to eclogite-facies recrystallization when they were exhumated from mantle depths to deep crustal levels; (2) early retrogressive vein which was formed in the early stage of eclogite exhumation subsequent to the recrystallization, the vein-forming fluid is still relevant to the eclogites; (3) late retrogressive vein which was formed in the late stage of eclogite exhumation from deep crustal to upper crustal levels, oxygen isotope fractionation between vein quartz and host eclogite significantly deviates from equilibrium values and the vein-forming fluid was principally derived from granitic gneiss hosting the eclogites. For the synmetamorphic vein, it appears that local advective transport of fluid is the predominant mechanism in the processes of vein precipitation; the scale of oxygen isotope homogenization within the veins is much larger than that within the associated eclogites. The vein-forming fluid would be derived from the exsolution of dissolved hydroxyls within eclogite minerals due to significant pressure decrease. Fluid flow prior to the eclogite-facies recrystallization and the early retrogression may occur mainly along pressure gradients.  相似文献   

17.
下扬子及周边地区存在着丰富的地质构造和多金属矿产资源,其深部结构和动力学过程已成为地学界研究的热点.为了更好地讨论下扬子及周边地区的深部动力学过程和岩浆活动机制,本文基于均匀网格层析成像方法提出了非均匀网格远震层析成像方法,利用大量的天然地震相对走时残差数据反演获得了下扬子及周边地区深至700 km范围内的三维S波和P波速度结构,并根据纵横波的比值关系计算出泊松比异常.由于S波速度比P波对流体的反应更加敏感,所以泊松比异常反映了物质是否包含流体或者物质的软硬、冷热程度.本研究结果显示:(1)长江中下游成矿带下方的上地幔内存在明显的高泊松比异常,而地幔过渡带内则存在明显的低泊松比异常;(2)大别造山带及其南侧的中扬子地块的上地幔中下部及地幔过渡带内都存在明显低泊松比异常,且呈现东深西浅的空间分布特征.结合已有的地质、地球物理和地球化学等资料,我们认为长江中下游成矿带下方的地幔过渡带内滞留着古太平洋俯冲板块,其上地幔内则赋存着软的上地幔热物质,为深部成矿提供了热量或幔源物质.因此,古太平洋板块的俯冲对长江中下游成矿带的形成发挥了至关重要的作用.  相似文献   

18.
H. Tabata  S. Maruyama  & Z. Shi 《Island Arc》1998,7(1-2):142-158
The ultrahigh- and high-pressure (UHP–HP) metamorphic belt of the Dabie Mountains, central China, formed by the Triassic continental subduction and collision, is divided into four metamorphic zones; from south to north, the greenschist facies zone, epidote amphibolite to amphibolite facies zone, quartz eclogite zone, and coesite eclogite zone, based on metabasite mineral assemblages. Most of the coesite-bearing eclogites consist mainly of garnet and omphacite with homogeneous compositions and have partially undergone hydration reactions to form clinopyroxene + plagioclase + calcic amphibole symplectites during amphibolite facies overprinting. However, the least altered eclogites sometimes contain garnet and omphacite that preserve compositional zoning patterns which may have originated during their growth at peak temperature conditions of ∼ 750 °C, suggesting a short duration of UHP metamorphic conditions and/or consequent rapid cooling during exhumation. Systematic investigation on peak metamorphic temperatures of coesite eclogite have revealed that, contrary to the general trend of metamorphic grade in the southern Dabie unit, the coesite eclogite zone shows rather flat thermal structure (T = 600 ± 50 °C) with the highest temperature reaching up to 850 °C and no northward increase in metamorphic temperature, which is opposed to the previous interpretations. This feature, along with the preservation of compositional zonation, implies complicated differential movement of each eclogite mass during UHP metamorphism and the return from the deeper subduction zone at mantle depths to the surface.  相似文献   

19.
青藏高原东缘的地壳流及动力过程   总被引:13,自引:6,他引:7       下载免费PDF全文
黏滞性地壳流对地壳及上地幔变形作用及动力机制,是大陆新生代造山带的一个重要研究内容.青藏高原中下地壳存在部分熔融或含水物质的黏滞性流体,已为一系列地球物理及岩石学研究所证实.为研究青藏高原东缘地壳流的动力作用,本文用密集的被动源宽频带地震台的观测数据,反演了地壳上地幔精细速度结构和泊松比.研究表明,川西及滇西北高原的中地壳内普遍存在低速层,而高泊松比的地壳只分布在川西北地区.位于中地壳的黏滞性地壳流从青藏高原腹地羌塘高原流出,自北西向南东流入青藏高原东缘.这些黏滞性地壳流带动了上地壳块体水平移动,当它们受到刚强的四川盆地及华南地块阻挡时将发生分层作用,地壳流将分为二或更多分支不同方向的分流,向上的一支地壳流将对上地壳产生挤压,引起地面隆升,向下的一支地壳流将使莫霍面下沉加厚下地壳·黏滞性地壳流的运动在地壳中产生应变破裂发生强烈地震活动,地震的空间分布与震源机制也受到地壳流动力作用控制.  相似文献   

20.
Two unusual diamonds were studied from kimberlites from China, which contain both ultramafic and eclogitic mineral inclusions in the same diamond hosts. Diamond L32 contains seven Fe-rich garnets, four omphacites and one olivine inclusion. Four olivine, one sanidine and one coesite were recovered from diamond S32. Both garnet and omphacite inclusions have similar compositions as those from other localities of the world, and show basaltic bulk composition. All the garnet and omphacite inclusions in diamond L32 have positive Eu anomalies (Eu/Eu*1.64 1.79). These observations support the proposal that mantle eclogite is the metamorphic product of subducted ancient oceanic crust. The Mg/(Mg + Fe) ratio of the olivine inclusions from the two diamonds (91-92) are evidently lower than the normal olivine inclusions in diamonds from the same kimberlite pipe (92-95). The following model is proposed for the formation of diamonds with “mixed” mineral inclusions. Ascending diamond-bearing eclogite (recycled oceanic crust) entrained in mantle plumes may experience extensive partial melting, whereas the ambient peridotite matrix remains subsolidus in the diamond stable field. This provides a mechanism for the transport of diamond from its original eclogitic host to an ultramafic one. Subsequent re-growth of diamond in the new environment makes it possible to capture mineral inclusions of different lithological suites. Partial melts of basaltic sources may interact with the surrounding peridotite, resulting in the relatively lower Mg/(Mg + Fe) ratios of the coexisting olivine inclusions from the studied diamonds. Diamonds with “mixed” mineral inclusions demonstrate that plume activity also occurred in the Archean cratons.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号