首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 432 毫秒
1.
Estimates of subsurface temperatures in the Archean craton of southern Africa during the Archean derived from diamond thermobarometry studies are remarkably similar to temperatures estimated for the same depths today, even though heat production in the earth and the mean global heat flow were probably substantially higher in the Archean. We present multi-dimensional numerical models for the thermal environment of the Archean craton in southern Africa during the Archean in which deep mantle heat is diverted away from the craton toward the surrounding oceanic lithosphere by a lithospheric root beneath the craton. Extrapolation of present-day models to thermal conditions appropriate for the Archean is inadequate to explain the similarity of present-day and Archean temperatures in the cratonic root. Reconciliation of the modern and ancient temperature estimates requires either relaxation of the constraints that the cratonic crustal heat production and/or the earth's mean mantle temperature were higher in the Archean than they are today, or that substantial “erosion” of the lithosphere comprising the cratonic root has occurred since the Archean. The latter possibility could perhaps result from revolatilization of the cratonic root in association with thermal perturbations in the mantle, for which there is evidence in southern Africa in the form of post-Archean tectonic and igneous activity.  相似文献   

2.
We have measured concentrations of heat producing elements (Th, U, and K) in 58 samples representative of the main lithologies in a 100 km transect of the Superior Province of the Canadian Shield, from the Michipicoten (Wawa) greenstone belt, near Wawa, Ontario, through a domal gneiss terrane of amphibolite grade, to the granulite belt of the Kapuskasing Structural Zone, near Foleyet. This transect has been interpreted as an oblique cross section through some 25 km of crust, uplifted along a major thrust fault, and thus provides an opportunity to examine in detail a continuous profile into deep continental crust of Archean age. Mean heat production values for these terranes, based on aereal distribution of major rock types and calculated from their Th, U, and K concentrations are: Michipicoten greenstone belt = 0.72 μW m−3; Wawa domal gneiss terrane (amphibolite grade) = 1.37 μW m−3; Kapuskasing granulites = 0.44 μW m−3. Among the silicic plutonic rocks (tonalites, granites, and their derivative gneisses), the relatively large variation in heat production correlates with modal abundances of accessory minerals including allanite, sphene, zircon, and apatite. We interpret these variations as primary (pre-metamorphic). The relatively high weighted mean heat production of the domal gneiss terrane can be accounted for by the larger proportion there of late-stage Th-, U-, and K-rich granitoid plutons. These may have been derived from the underlying Kapuskasing granulite terrane, leaving it slightly depleted in heat producing elements. Transport of Th, U, and K, therefore, could have taken place in silicate melts rather than in aqueous or carbonic metamorphic fluids. This conclusion is supported by the lack of a statistically significant difference in heat production between tonalites, tonalite gneisses and mafic rocks of amphibolite versus granulite grade.The pre-metamorphic radioactivity profile for this crustal section is likely to have been uniformly low, with a mean heat production value less than 1 μW m−3. This result is distinctly different from measured profiles in more silicic terranes, which show decreasing heat production with depth. This implies fundamental differences in crustal radioactivity distributions between granitic and more mafic terranes, and may be an important factor in selective reactivation of lithologically different terranes, possibly resulting in preferential stabilization of basic terranes in the geological record. Our results indicate that a previously determined apparently linear heat flow-heat production relationship for the Kapuskasing area does not relate to the distribution of heat production with depth. Low, but significant heat production, 0.4–0.5 μW m−3, continues to lower crustal depths with no correlation to the depth parameter from the linear relationship. This low heat production may be a minimum average granulite heat production and suggests that, in general, heat flow through the Moho is 8–10 mW m−2 lower than the reduced heat flow calculated from the heat flow-heat production regression.  相似文献   

3.
Continental shield regions are normally characterized by low-to-moderate mantle heat flow. Archaean Dharwar craton of the Indian continental shield also follows the similar global pattern. However, some recent studies have inferred significantly higher mantle heat flow for the Proterozoic northern block of Southern Granulite Terrain (SGT) in the immediate vicinity of the Dharwar craton by assuming that the radiogenic elements depleted exposed granulites constitute the 45-km-thick crust. In this study, we use four-layered model of the crustal structure revealed by integrated geophysical studies along a geo-transect in this region to estimate the mantle heat flow. The results indicate that: (i) the mantle heat flow of the northern block of SGT is 17 ± 2 mW/m2, supporting the global pattern, and (ii) the lateral variability of 10–12 mW/m2 in the surface heat flow within the block is of crustal origin. In terms of temperature, the Moho beneath the eastern Salem–Namakkal region appears to be at 80–100 °C higher temperature than that beneath the western Avinashi region.  相似文献   

4.
The Red Sea is a modern example of continental fragmentation and incipient ocean formation. Heat flow data have been collected from eastern Egypt to provide information relating to the mode and mechanism of Red Sea opening. Preliminary heat flow data, including new data reported here, are now available from twenty-five sites in eastern Egypt and one site in western Sinai. A pattern of low to normal heat flow (35–55 mW m−2) inland with high heat flow (75–100 mW m−2) in a zone within 30 to 40 km of the coast is indicated.Moderately high heat flow (around 70 mW m−2) is indicated for the Gulf of Suez. The coastal zone thermal anomaly appears continuous with high heat flow previously reported for the Red Sea shelf. Heat production data indicate that the coastal thermal anomaly is not primarily related to crustal radiogenic heat production. The effects of rapid erosion may contribute to the anomaly, but are not thought to be the primary cause of the anomaly. If the anomaly is caused by lateral conduction from hot, extended, offshore lithosphere, the extension must have been active for the last 30 Ma or so, and a minimum of 100% extension is indicated. Alternatively, the anomaly is primarily caused by high mantle heat flow causing lithospheric thinning, centred beneath the Red Sea. The Red Sea is probably underlain by dominantly basic crust, formed either by intrusion into attenuated continental crust or sea-floor spreading, and for most purposes the crust formed in these two modes of extension may be essentially indistinguishable. Fission-track ages from eastern Egypt indicate that uplift started prior to, or at latest at the time of initial Red Sea opening, and this result, together with thermo-mechanical considerations, suggests an active asthenospheric upwelling beneath the Red Sea and high temperature in the lithosphere prior to extension.  相似文献   

5.
Heat flow values were calculated from direct measurements of temperature and thermal conductivity at thirteen sites in the Arkansas-Missouri Ozark Plateau region. These thirteen values are augmented by 101 estimates of heat flow, based on thermal conductivity measurements and temperature gradients extrapolated from bottom-hole temperatures. The regional heat flow profile ranges from 9 mW m−2 to over 80 mW m−2, but at least two distinct thermal regimes have been identified. Seven new heat flow determinations are combined with three previously published values for the St. Francois Mountains (SFM), a Precambrian exposure of granitic and rhyolitic basement rocks, average 47 mW m−2. Radioactive heat production of 76 samples of the exposed rocks in the SFM averages 2.4 μW m−2 and a typical continental basement contribution of 14 mW m−2 is implied. Conversely, the sedimentary rock sequence of the plateau is characterized by an anomalously low heat flow, averaging approximately 27 mW m−2. Groundwater transmissivity values that are based on data from 153 wells in deep regional aquifers demonstrate an inverse relationship to the observed heat flow patterns. The areas of high transmissivity that correspond to areas of low total heat flux suggest that the non-conservative vertical heat flow within the Ozark sedimentary sequence can be attributed to the effects of groundwater flow.  相似文献   

6.
On the evolution of the geothermal regime of the North China Basin   总被引：1，自引：0，他引：1  
Recent heat flow and regional geothermal studies indicate that the North China Basin is characterized by relatively high heat flow compared with most stable areas in other parts of the world, but lower heat flow than most active tectonic areas. Measured heat flow values range from 61 to 74 mW m−2. The temperature at a depth of 2000 m is generally in the range 75 to 85°C, but sometimes is 90°C or higher. The geothermal gradient in Cenozoic sediments is in the range 30 to 40°C/km for most of the area. The calculated temperature at the Moho is 560 and 640°C for surface heat flow values of 63 and 71 mW m−2, respectively. These thermal data are consistent with other geophysical observations for the North China Basin. Relatively high heat flow in this area is related to Late Cretaceous-Paleogene rifting as described in this paper.  相似文献   

7.
The North China Craton (NCC) witnessed Mesozoic vigorous tectono-thermal activities and transition in the nature of deep lithosphere. These processes took place in three periods: (1) Late Paleozoic to Early Jurassic (～170 Ma); (2) Middle Jurassic to Early Cretaceous (160–140 Ma); (3) Early Cretaceous to Cenozoic (140 Ma to present). The last two stages saw the lithospheric mantle replacement and coupled basin-mountain response within the North China Craton due to subduction and retreating of the Paleo-Pacific plate, and is the emphasis in this paper. In the first period, the subduction and closure of the Paleo- Asian Ocean triggered the back-arc extension, syn-collisional compression and then post-collisional extension accompanied by ubiquitous magmatism along the northern margin of the NCC. Similar processes happened in the southern margin of the craton as the subduction of the Paleo-Tethys ocean and collision with the South China Block. These processes had caused the chemical modification and mechanical destruction of the cratonic margins. The margins could serve as conduits for the asthenosphere upwelling and had the priority for magmatism and deformation. The second period saw the closure of the Mongol-Okhotsk ocean and the shear deformation and magmatism induced by the drifting of the Paleo-Pacific slab. The former led to two pulse of N-S trending compression (Episodes A and B of the Yanshan Movement) and thus the pre-existing continental marginal basins were disintegrated into sporadically basin and range province by the Mesozoic magmatic plutons and NE-SW trending faults. With the anticlockwise rotation of the Paleo-Pacific moving direction, the subduction-related magmatism migrated into the inner part of the craton and the Tanlu fault became normal fault from a sinistral one. The NCC thus turned into a back-arc extension setting at the end of this period. In the third period, the refractory subcontinental lithospheric mantle (SCLM) was firstly remarkably eroded and thinned by the subduction-induced asthenospheric upwelling, especially those beneath the weak zones (i.e., cratonic margins and the lithospheric Tanlu fault zone). Then a slightly lithospheric thickening occurred when the upwelled asthenosphere got cool and transformed to be lithospheric mantle accreted (～125 Ma) beneath the thinned SCLM. Besides, the magmatism continuously moved southeastward and the extensional deformations preferentially developed in weak zones, which include the Early Cenozoic normal fault transformed from the Jurassic thrust in the Trans-North Orogenic Belt, the crustal detachment and the subsidence of Bohai basin caused by the continuous normal strike slip of the Tanlu fault, the Cenozoic graben basins originated from the fault depression in the Trans-North Orogenic Belt, the Bohai Basin and the Sulu Orogenic belt. With small block size, inner lithospheric weak zones and the surrounding subductions/collisions, the Mesozoic NCC was characterized by (1) lithospheric thinning and crustal detachment triggered by the subduction-induced asthenospheric upwelling. Local crustal contraction and orogenesis appeared in the Trans-North Orogenic Belt coupled with the crustal detachment; (2) then upwelled asthenosphere got cool to be newly-accreted lithospheric mantle and crustal grabens and basin subsidence happened, as a result of the subduction zone retreating. Therefore, the subduction and retreating of the western Pacific plate is the outside dynamics which resulted in mantle replacement and coupled basin-mountain respond within the North China Craton. We consider that the Mesozoic decratonization of the North China Craton, or the Yanshan Movement, is a comprehensive consequence of complex geological processes proceeding surrounding and within craton, involving both the deep lithospheric mantle and shallow continental crust.  相似文献   

8.
用面波方法研究上扬子克拉通壳幔速度结构   总被引：6，自引：3，他引：3       下载免费PDF全文
本文研究采用单台法和双台法提取了穿越上扬子的基阶面波相速度和群速度频散;通过对提取的面波群速度和相速度频散进行联合反演,得到的1-D SV速度模型显示上扬子块体下地壳S波速度与典型克拉通区域相当,其上地幔顶部80~170 km深处存在高速的岩石圈盖层,较AK135模型要快2%~3%,其岩石圈厚度约为180 km.在上扬子地区,径向各向异性集中分布在300 km以浅的岩石圈与软流圈部分,其中岩石圈部分SH波比SV波波速要快2%~4%,软流圈部分SH波比SV波波速要快3%~5%;Rayleigh波相速度方位各向异性分析结果显示,上扬子块体周期为25~45 s（大致相当于30~70 km深度范围内）的Rayleigh波相速度存在1.8%~2.7%不等的方位各向异性,其快波方向介于147°~174°.我们认为上扬子块体径向各向异性集中分布在岩石圈、软流圈部分,且各向异性随深度变化, 其岩石圈部分各向异性为大陆克拉通化的遗迹,软流圈部分各向异性与现今板块运动相关.  相似文献   

9.
Two localities on the Leizhou Peninsula, southern China (Yingfengling and Tianyang basaltic volcanoes) yield a wide variety of mantle-derived xenoliths including Cr-diopside series mantle wall rocks and two distinct types of Al-augite series pyroxenites. Metapyroxenites have re-equilibrated granoblastic microstructures whereas pyroxenites with igneous microstructures have not thermally equilibrated to the mantle conditions. An abundant suite of megacrysts and megacrystic aggregates (including garnet, plagioclase, clinopyroxene, ilmenite and apatite) is interpreted as the pegmatitic equivalents of the igneous pyroxenite suite. Layered spinel lherzolite/spinel websterite xenoliths were formed by metamorphic differentiation caused by mantle deformation, inferred to be related to lithospheric thinning. Some metapyroxenites have garnet websterite assemblages that allow calculation of their mantle equilibration temperatures and pressures and the construction of the first xenolith geotherm for the southernmost China lithosphere. Heat flow data measured at the surface in this region yield model conductive geotherms (using average crustal conductivity values) that are consistent with the xenolith geotherm for the mantle. The calculated mean surface heat flux is 110 mW/m2. This high heat flux and the high geotherm are consistent with young lithospheric thinning in southern China, and with recent tomography results showing shallow low-velocity zones in this region. The xenolith geotherm allows the construction of a lithospheric rock type section for the Leizhou region; it shows that the crust–mantle boundary lies at about 30 km, consistent with seismic data, and that the lithosphere–asthenosphere boundary lies at about 100 km.  相似文献   

10.
In southern British Columbia the terrestrial heat flow is low (44 mW m–2) to the west of the Coast Plutonic Complex (CPC), average in CPC (50–60 mW m–2),and high to the east(80–90 mW m–2). The average heat flow in CPC and the low heat generation (less than 1 W m–3) indicate that a relatively large amount of heat flows upwards into the crust which is generally quite cool. Until two million years ago the Explorer plate underthrust this part of the American plate, carrying crustal material into the mantle. Melted crustal rocks have produced the inland Pemberton and Garibaldi volcanic belts in the CPC.Meager Mountain, a volcanic complex in the CPC 150 km north of Vancouver, is a possible geothermal energy resource. It is the product of intermittent activity over a period of 4 My, the most recent eruption being the Bridge River Ash 2440 y B.P. The original explosive eruption produced extensive fracturing in the granitic basement, and a basal explosion breccia from the surface of a cold brittle crust. This breccia may be a geothermal reservoir. Other volcanic complexes in the CPC have a similar potential for geothermal energy.Earth Physics Contribution No. 704.  相似文献   

11.
华北克拉通热结构差异性特征及其意义   总被引：1，自引：1，他引：0       下载免费PDF全文
华北克拉通破坏存在空间上的差异性,至今其内在的动力学机制仍存在较大的争议,这种差异性在岩石圈热结构上必然有所表现.广义上岩石圈热结构包括热流结构、温度场结构和热岩石圈厚度,是揭示岩石圈演化及其内在动力学过程的重要基础.基于二维地震剖面和大地热流数据,建立二维稳态热传导有限元模型,对华北克拉通东部岩石圈热结构进行模拟计算并与西部进行对比分析,在此基础上对比热岩石圈与地震岩石圈厚度差异的变化.结果显示,华北克拉通东、西部岩石圈热结构有着较为明显的差异,地幔热流值波动范围分别在24~44/20.5~24.5mW·m~(-2),壳幔比1.61~0.70/1.84~1.51,以1300℃等温线计算得到的热岩石圈厚度变化范围在75~139km/128~162km.华北克拉通东部相对西部有着较高的深部地幔热流值和较小的地震/热岩石圈厚度差异,这可能意味着东部软流圈地幔有效黏度相比西部低,估算差异可达2~3个数量级.  相似文献   

12.
This paper reports ten new surface heat-flow density (qs) values for central and southern Israel (central Sinai Microplate), whose crystalline crust and lithosphere formed as part of the Neoproterozoic Arabian-Nubian Shield. Heat flow was calculated in Mesozoic sediments using the classical approach of heat-flow determination by implementing in the analysis high-precision continuous temperature logs obtained in air- and/or water-filled boreholes. Thermal conductivity (TC) measured for a large suite of rock samples of lithotypes making up the sequence was assigned to temperature gradients in intervals for which the lithology was known. The heat-flow values obtained for different depth intervals in a borehole as well as the average values for the individual borehole locations cover a narrow range, attesting heat-conduction conditions. A steady-state thermal model along an E–W crustal cross section through the area shows that the observed systematic spatial distribution of the qs values, which range between 50 and 62 mW m−2, can primarily be explained by variations in the thickness of the upper crust and in the ratio between sedimentary and crystalline rocks therein. Given the time lapse of thermal heat transfer through the lithosphere, the qs data monitor the crustal thermal conditions prior to rift- and plume-related lithospheric thermal perturbations that have started in the larger area ca. 30 Ma ago. Observed and modeled qs display the best fit for a pre-Oligocene lithosphere–asthenosphere boundary (LAB) at ∼150 km, which would be at the upper end of LAB depths determined from stable areas of the Arabian Shield (150–120 km) not affected by the young, deep-seated thermal processes that have caused a further uprise of the LAB. Our data imply or predict that the surface heat flow of the Sinai Microplate generally tends to increase along N–S and W–E traverses, from ∼45–50 mW m−2 to ∼55–60 mW m−2. Surface heat flows on the order of 55–60 mW m−2 may be common in the northern Arabian Shield, where it exhibits typical lithosphere structure and composition and is unaffected by young heating processes, compared to values of ≤45 mW m−2 recently determined in the southern Arabian Plate for the Arabian Platform.  相似文献   

13.
Thermal modeling of the Southern Alps,New Zealand   总被引：1，自引：0，他引：1  
Finite-element modeling of the thermal regime across the Southern Alps of New Zealand has been carried out along two profiles situated near the Franz Josef and Haast valleys. The modeling involves viscous deformation beneath the Southern Alps, including both uplift and erosion, and crustal/lithospheric thickening, as a result of crustal shortening extending to 20 mm/y of a 25-km thick crust. Published uplift rates and crustal thickness variations along the two profiles are used to constrain the modeled advection of crustal material, and results are compared with the recent heat flow determinations, 190±50 mW/m2 in the Franz Josef valley and 90±25 mW/m2 in the Haast valley. Comparisons of the model with published K–Ar and fission track ages, show that the observed heat flow in the Franz Josef valley is consistent with observed zircon fission track ages of around 1 Ma, if the present-day uplift rate is close to 10 mm/y. Major thermal differences between the Franz Josef and Haast profiles appear to be due to different uplift and erosion rates. There is weak evidence that frictional heating close to the Alpine fault zone is not significant. The modeling provides explanations for the distribution of seismicity beneath the Southern Alps, and predicts a low surface heat flow over the eastern foothills due to the dominant thermal effect of crustal thickening beneath this region. Predicted temperatures at mid-crustal depth beneath the zone of maximum uplift rate are 50–100°C cooler than those indicated in previously published models, which implies that thermal weakening of the crust may not be the main factor causing the aseismicity of the central Southern Alps. The results of the modeling demonstrate that the different types of reset age data in the region within 25 km of the Alpine fault are critical for constraining models of the deformation and the thermal regime beneath the Southern Alps.  相似文献   

14.
The analysis of both temperature data and thermal conductivity material from seven deep oil exploration horeholes in northeast Africa has allowed the calculation of a heat flow value in the Somalian Horn (average58 ± 12mW m?2) and one from the coastal plain of northeast Sudan (average96 ± 19mW m?2). Heat production measurements of granites from the Sudanese basement indicate a substantial depletion in the radiogenic heat producing elements.The heat flow results complement previous measurements from the Gulf of Aden and the Red Sea and are consistent with the geological and geophysical consensus that these two regions are young proto-oceans formed by the mechanisms of spreading lithospheric plates. The heat production evidence suggests that the lithospheric plate beneath the Sudan coastal plain is approximately 30–50 km thick and underlain by a zone of partial or complete melt.  相似文献   

15.
An attempt is made to obtain a combined geophysical model along two regional profiles: Black Sea— White Sea and Russian Platform—French Central Massif. The process of the model construction had the following stages: 1. The relation between seismic velocity (Vp, km/s) and density (σ, g/cm3) in crustal rocks was determined from seismic profiles and observed gravity fields employing the trial and error method. 2. Relations between heat production HP (μW/m3), velocity and density were established from heat flow data and crustal models of old platforms where the mantle heat flow HFM is supposed to be constant. The HFM value was also determined to 11 ± 5 mW/m2. 3. A petrological model of the old platform crust is proposed from the velocity-density models and the observed heat flow. It includes 10–12 km of acid rocks, 15–20 km of basic/metamorphic rocks and 7–10 km of basic ones. 4. Calculation of the crustal gravity effects; its substraction from the observed field gave the mantle gravity anomalies. Extensively negative anomalies have been found in the southern part of Eastern Europe (50–70 mgal) and in Western Europe (up to 200 mgal). They correlate with high heat flow and lower velocity in the uppermost mantle. 5. A polymorphic advection mechanism for deep tectonic processes was proposed as a thermal model of the upper mantle. Deep matter in active regions is assumed to be transported (advected) upwards under the crust and in its place the relatively cold material of the uppermost mantle descends. The resulting temperature distribution depends on the type of endogeneous regime, on the age and size of geostructure. Polymorphic transitions were also taken into account.  相似文献   

16.
全球大地热流-岩石生热率关系综合分析   总被引：2，自引：0，他引：2       下载免费PDF全文
大地热流分析是研究大地构造地球动力学和地壳化学组成的一个重要手段通过对全球范围大陆地区大地热流和岩石放射性生热率数据的综合统计分析探讨地壳一地慢热流配分统计结果揭示,全球尺度显生亩地质构造区热流与岩石生热率之间不存在简单的线性关系,但两者在隐生宙地盾区却具有明显正相关关系从大地热流-岩石生热率关系在显生亩地区和在隐生宙地区的差异可以大致确定壳-幔热流成分的变化范围取地壳厚度为30－50km,根据前寒武地盾区热流与生热率之间的统计关系可以进一步推测地壳岩石中放射性生热元素的平均丰度范围分别为铀（0．5-1．6）×10－6,钍（1．8－6．1）×10－6,氧化钾0．6％-1．9％．  相似文献   

17.
Integrative models of crust and mantle structure, age, and growth of the oldest continental nuclei—the Archean cratons—are critical to understanding the processes that stabilize continental lithosphere. For the Kaapvaal craton of southern Africa, conflicting ages of stabilization have been derived from studies of its crust and underlying mantle. New U-Pb zircon geochronological data from the western Kaapvaal craton reveal that two older (3.7 to 3.1 billion year old) continental masses, the Kimberley and Witwatersrand blocks, were juxtaposed by a significantly younger, previously unresolved episode of subduction and terrane collision between 2.93 and 2.88 billion years ago. Geological evidence indicates that convergence was accommodated by subduction beneath the Kimberley block, culminating in collisional suturing in the vicinity of the present-day Colesberg magnetic lineament. The timing of these convergent margin processes is further shown to correlate with the strong peak in Re-Os age distributions of Kimberley block mantle peridotites, eclogites, and eclogite-hosted diamonds. These data thus support the petrogenetic coupling of continental crust and lithospheric mantle through a model of continental arc magmatism, subduction zone mantle wedge processing and terminal collisional advective thickening to form Archean continental tectosphere.  相似文献   

18.
A vacuum microbalance technique has been used to determine the specific surface areas and porosities of suspended solids and sediments from two turbid estuaries. In the Tamar Estuary, the suspended solids had specific surface areas in the range 8–20 m2 g−1 whereas the sediments were in the range 5–15 m2 g−1. Sediments from the iron-rich system of Restronguet Creek were in the range 5–26 m2 g−1. The specific surface areas and porosities of the particles were influenced by the carbon and non-detrital iron contents. The results are relevant to sorption behaviour of dissolved trace constituents in the presence of natural particles.  相似文献   

19.
The Southern Granulite Terrain of India, formed through an ancient continental collision and uplift of the earth’s surface, was accompanied by thickening of the crust. Once the active tectonism ceased, the buoyancy of these deep crustal roots must have supported the Nilgiri and Palani-Cardamom hills. Here, the gravity field has been utilized to provide new constraints on how the force of buoyancy maintains the state of isostasy in the Southern Granulite Terrain. Isostatic calculations show that the seismically derived crustal thickness of 43–44 km in the Southern Granulite Terrain is on average 7–8 km more than that required to isostatically balance the present-day topography. This difference cannot be solely explained applying a constant shift in the mean sea level crustal thickness of 32 km. The isostatic analysis thus indicates that the current topography of the Southern Granulite Terrain is overcompensated, and about 1.0 km of the topographic load must have been eroded from this region without any isostatic readjustment. The observed gravity anomaly, an order of magnitude lower than that expected (−125 mGal), however, shows that there is no such overcompensation. Thermal perturbations up to Pan-African, present-day high mantle heat flow and low Te together negate the possible resistance of the lithosphere to rebound in response to erosional unloading. To isostatically compensate the crustal root, compatible to seismic Moho, a band of high density (2,930 kg m−3) in the lower crust and low density (3,210 kg m−3) in the lithospheric mantle below the Southern Granulite Terrain is needed. A relatively denser crust due to two distinct episodes of metamorphic phase transitions at 2.5 Ga and 550 Ma and highly mobilized upper mantle during Pan-African thermal perturbation reduced significantly the root buoyancy that kept the crust pulled downward in response to the eroded topography.  相似文献   

20.
Heat flow values of 33–58 mW m–2 were found for the Transylvanian Depression, 45–57 mW m–2 for the crystalline nucleus of the Eastern Carpathians, and 70–120 mW m–2 for the Neogene volcanic area. Temperature-depth profile and some geophysical implications of the low values for the Transylvanian Depression are discussed, rendering evident clear-cut differences between this tectonic unit and other Noegene depressions. The heat flow values for the other two investigated tectonic units are usual ones for areas of their age.A preliminary map of the heat flow distribution over the Romanian territory is presented and its relation to other geophysical fields is discussed. A positive correlation was found between gravity and heat flow, and a negative one between crustal thickness and heat flow. A general conclusion could be drawn that the heat flow distribution over the Romanian territory seems to be governed by processes taking place in the upper mantle, rather than by the radioactive decay within the crust.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号