共查询到20条相似文献，搜索用时 15 毫秒
1.
Constantinos Tsingas Thierry Brizard Abdulaziz Al Muhaidib 《Geophysical Prospecting》2019,67(6):1557-1570
Although narrow-azimuth towed-streamer data provide good image quality for structural interpretation, it is generally accepted that for wide-azimuth marine surveys seabed receivers deliver superior seismic reflection measurements and seismically derived reservoir attributes. However, seabed surveys are not widely used due to the higher acquisition costs when compared to streamer acquisition. In recent years, there have been significant engineering efforts to automate receiver deployment and retrieval in order to minimize the cost differential and conduct cost-efficient seabed receiver seismic surveys. These engineering efforts include industrially engineered nodes, nodes on a rope deployment schemes and even robotic nodes, which swim to and from the deployment location. This move to automation is inevitable, leading to robotization of seismic data acquisition for exploration and development activities in the oil and gas industry. We are developing a robotic-based technology, which utilizes autonomous underwater vehicles as seismic sensors without the need of using a remotely operated vehicle for deployment and retrieval. In this paper, we describe the autonomous underwater vehicle evolution throughout the project years from initial heavy and bulky nodes to fully autonomous light and flexible underwater receivers. Results obtained from two field pilot tests using different generations of autonomous underwater vehicles indicate that the seismic coupling, and navigation based on underwater acoustics are very reliable and robust. 相似文献
2.
Stian Hegna Tilman Klüver Jostein Lima Jens F. Wisløff 《Geophysical Prospecting》2019,67(6):1472-1485
A marine seismic method based on continuous source and receiver wavefields has been developed. The method requires continuous recording of the seismic data. The source that may consist of multiple source elements can emit signals continuously while moving. The ideal source wavefield to be used with this method should be as white as possible both in a temporal and a spatial sense to avoid deep notches in the spectrum enabling a stable multi-dimensional deconvolution. White noise has such properties. However, equipment that can generate white noise does not exist. In order to generate a continuous source wavefield that is approaching the properties of white noise using existing equipment onboard marine seismic vessels, individual air-guns can be triggered with short randomized time intervals in a near-continuous fashion. The main potential benefits with the method are to reduce the environmental impact of marine seismic surveys and to improve acquisition efficiency. The peak sound pressure levels are significantly reduced by triggering one air-gun at a time compared to conventional marine seismic sources. Sound exposure levels are also reduced in most directions. Since the method is based on continuous recording of seismic data and the air-guns are triggered based on time and not based on position, there are less vessel speed limitations compared to conventional marine seismic data acquisition. Also, because the source wavefield is spread out in time, the wavefields emitted from source elements in different cross-line positions can be designed such that the emitted wavefield is spatially white in this direction. This means that source elements in multiple cross-line positions can be operated simultaneously, potentially improving the cross-line sampling and/or the acquisition efficiency. 相似文献
3.
Michael S. Zhdanov Masashi Endo Leif H. Cox Martin Čuma Johnathan Linfoot Chris Anderson Noel Black Alexander V. Gribenko 《Geophysical Prospecting》2014,62(3):552-572
A towed streamer electromagnetic system capable of simultaneous seismic and electromagnetic data acquisition has recently been developed and tested in the North Sea. We introduce a 3D inversion methodology for towed streamer electromagnetic data that includes a moving sensitivity domain. Our implementation is based on the 3D integral equation method for computing responses and Fréchet derivatives and uses the re‐weighted regularized conjugate gradient method for minimizing the objective functional with focusing regularization. We present two model studies relevant to hydrocarbon exploration in the North Sea. First, we demonstrate the ability of a towed electromagnetic system to detect and characterize the Harding field, a medium‐sized North Sea hydrocarbon target. We compare our 3D inversion of towed streamer electromagnetic data with 3D inversion of conventional marine controlled‐source electromagnetic data and observe few differences between the recovered models. Second, we demonstrate the ability of a towed streamer electromagnetic system to detect and characterize the Peon discovery, which is representative of an infrastructure‐led shallow gas play in the North Sea. We also present an actual case study for the 3D inversion of towed streamer electromagnetic data from the Troll field in the North Sea and demonstrate our ability to image all the Troll West Oil and Gas Provinces and the Troll East Gas Province. We conclude that 3D inversion of data from the current generation of towed streamer electromagnetic systems can adequately recover hydrocarbon‐bearing formations to depths of approximately 2 km. We note that by obviating the need for ocean‐bottom receivers, the towed streamer electromagnetic system enables electromagnetic data to be acquired over very large areas in frontier and mature basins for higher acquisition rates and relatively lower cost than conventional marine controlled‐source electromagnetic methods. 相似文献
4.
Luc T. Ikelle 《Geophysical Prospecting》1999,47(2):179-193
The current inverse scattering solution used for multiple attenuation of marine seismic reflection data assumes that sources and receivers are located in the water. To adapt this solution to the ocean-bottom cable (OBC) experiment where receivers are located on the sea-floor, we have proposed combining the conventional marine surface seismic reflection data (streamer data) with OBC data. The streamer data add to the OBC data some of the wave paths needed for multiple attenuation. This combination has allowed us to develop a multiple attenuation method for OBC data which does not require any knowledge of the subsurface and which takes into account all free-surface multiples, including receiver ghosts. A non-linear synthetic data example consisting of pressure and particle velocity fields is used to illustrate the procedure. 相似文献
5.
The marine controlled source electromagnetic (CSEM) technique has been adopted by the hydrocarbon industry to characterize the resistivity of targets identified from seismic data prior to drilling. Over the years, marine controlled source electromagnetic has matured to the point that four‐dimensional or time lapse surveys and monitoring could be applied to hydrocarbon reservoirs in production, or to monitor the sequestration of carbon dioxide. Marine controlled source electromagnetic surveys have also been used to target shallow resistors such as gas hydrates. These novel uses of the technique require very well constrained transmitter and receiver geometry in order to make meaningful and accurate geologic interpretations of the data. Current navigation in marine controlled source electromagnetic surveys utilize a long base line, or a short base line, acoustic navigation system to locate the transmitter and seafloor receivers. If these systems fail, then rudimentary navigation is possible by assuming the transmitter follows in the ship's track. However, these navigational assumptions are insufficient to capture the detailed orientation and position of the transmitter required for both shallow targets and repeat surveys. In circumstances when acoustic navigation systems fail we propose the use of an inversion algorithm that solves for transmitter geometry. This algorithm utilizes the transmitter's electromagnetic dipole radiation pattern as recorded by stationary, close range (<1000 m), receivers in order to model the geometry of the transmitter. We test the code with a synthetic model and validate it with data from a well navigated controlled source electromagnetic survey over the Scarborough gas field in Australia. 相似文献
6.
CO2 has been injected into the saline aquifer Utsira Fm at the Sleipner field since 1996. In order to monitor the movement of the CO2 in the sub‐surface, the seventh seismic monitor survey was acquired in 2010, with dual sensor streamers which enabled optimal towing depths compared to previous surveys. We here report both on the time‐lapse observations and on the improved resolution compared to the conventional streamer surveys. This study shows that the CO2 is still contained in the subsurface, with no indications of leakage. The time‐lapse repeatability of the dual sensor streamer data versus conventional data is sufficient for interpreting the time‐lapse effects of the CO2 at Sleipner, and the higher resolution of the 2010 survey has enabled a refinement of the interpretation of nine CO2 saturated layers with improved thickness estimates of the layers. In particular we have estimated the thickness of the uppermost CO2 layer based on an analysis of amplitude strength together with time‐separation of top and base of this layer and found the maximum thickness to be 11 m. This refined interpretation gives a good base line for future time‐lapse surveys at the Sleipner CO2 injection site. 相似文献
7.
Optimized experimental design aims at reducing the cost of a seismic survey by identifying the optimal locations and amounts of sources and receivers. While the acquisition design in the context of seismic imaging applies criteria like fold, offset and spatial sampling, different attributes such as the sensitivity kernels are more relevant for seismic full waveform inversion. An ideal measure to quantify the goodness of an acquisition design relies on the eigenvalue spectrum of the approximate Hessian matrix, but this technique is computationally too expensive for practical use. A more affordable goodness measure has been proposed in the past, but we demonstrate that this measure is inappropriate for target‐oriented optimized experimental design. To address those issues, we derived a sequential receiver‐based procedure using a goodness measure based on the determinant of the approximate Hessian matrix. We show with numerical tests that it efficiently provides an optimized design for target‐oriented as well as for extensive full waveform inversion. This design allows a better reconstruction of the subsurface than an evenly spaced acquisition geometry. Furthermore, the optimization algorithm itself can easily be parallelized, therefore making it attractive for applications to large‐scale three‐dimensional surveys. In addition, our algorithm is able to incorporate variable costs, representing any kind of acquisition‐related costs, for every individual source location. The combined optimization with respect to the information content of sources and to the true cost will allow a more comprehensive and realistic survey planning and has a high potential for further applications. 相似文献
8.
9.
Kees Wapenaar 《Geophysical Prospecting》2015,63(5):1033-1049
Interferometric redatuming is a data‐driven method to transform seismic responses with sources at one level and receivers at a deeper level into virtual reflection data with both sources and receivers at the deeper level. Although this method has traditionally been applied by cross‐correlation, accurate redatuming through a heterogeneous overburden requires solving a multidimensional deconvolution problem. Input data can be obtained either by direct observation (for instance in a horizontal borehole), by modelling or by a novel iterative scheme that is currently being developed. The output of interferometric redatuming can be used for imaging below the redatuming level, resulting in a so‐called interferometric image. Internal multiples from above the redatuming level are eliminated during this process. In the past, we introduced point‐spread functions for interferometric redatuming by cross‐correlation. These point‐spread functions quantify distortions in the redatumed data, caused by internal multiple reflections in the overburden. In this paper, we define point‐spread functions for interferometric imaging to quantify these distortions in the image domain. These point‐spread functions are similar to conventional resolution functions for seismic migration but they contain additional information on the internal multiples in the overburden and they are partly data‐driven. We show how these point‐spread functions can be visualized to diagnose image defocusing and artefacts. Finally, we illustrate how point‐spread functions can also be defined for interferometric imaging with passive noise sources in the subsurface or with simultaneous‐source acquisition at the surface. 相似文献
10.
Bjørn Askeland Bent Ole Ruud Halvor Hobæk Rolf Mjelde 《Journal of Applied Geophysics》2009,67(1):66-73
The Low-level Acoustic Combustion Source (LACS) which can fire its pulses at a high rate, has been tested successfully as a seismic marine source on shallow ice-age sediments in Byfjorden at Bergen, Norway. Pseudo-Noise pulsed signals with spiky autocorrelation functions were used to detect the sediments. Each transmitted sequence lasted 10 s and contained 43 pulses. While correlation gave a blurry result, deconvolution between the near-field recordings and the streamer recordings gave a clear seismic section. Compared to the section acquired with single air-gun shots along the same profile, the LACS gave a more clear presentation of the sediments and basement. 相似文献
11.
Topography and severe variations of near‐surface layers lead to travel‐time perturbations for the events in seismic exploration. Usually, these perturbations could be estimated and eliminated by refraction technology. The virtual refraction method is a relatively new technique for retrieval of refraction information from seismic records contaminated by noise. Based on the virtual refraction, this paper proposes super‐virtual refraction interferometry by cross‐correlation to retrieve refraction wavefields by summing the cross‐correlation of raw refraction wavefields and virtual refraction wavefields over all receivers located outside the retrieved source and receiver pair. This method can enhance refraction signal gradually as the source–receiver offset decreases. For further enhancement of refracted waves, a scheme of hybrid virtual refraction wavefields is applied by stacking of correlation‐type and convolution‐type super‐virtual refractions. Our new method does not need any information about the near‐surface velocity model, which can solve the problem of directly unmeasured virtual refraction energy from the virtual source at the surface, and extend the acquisition aperture to its maximum extent in raw seismic records. It can also reduce random noise influence in raw seismic records effectively and improve refracted waves’ signal‐to‐noise ratio by a factor proportional to the square root of the number of receivers positioned at stationary‐phase points, based on the improvement of virtual refraction's signal‐to‐noise ratio. Using results from synthetic and field data, we show that our new method is effective to retrieve refraction information from raw seismic records and improve the accuracy of first‐arrival picks. 相似文献
12.
In order to deconvolve the ghost response from marine seismic data, an estimate of the ghost operator is required. Typically, this estimate is made using a model of in‐plane propagation, i.e., the ray path at the receiver falls in the vertical plane defined by the source and receiver locations. Unfortunately, this model breaks down when the source is in a crossline position relative to the receiver spread. In this situation, in‐plane signals can only exist in a small region of the signal cone. In this paper, we use Bayes' theory to model the posterior probability distribution functions for the vertical component of the ray vector given the known source–receiver azimuth and the measured inline component of the ray vector. This provides a model for the ghost delay time based on the acquisition geometry and the dip of the wave in the plane of the streamer. The model is fairly robust with regard to the prior assumptions and controlled by a single parameter that is related to the likelihood of in‐plane propagation. The expected values of the resulting distributions are consistent with the deterministic in‐plane model when in‐plane likelihood is high but valid everywhere in the signal cone. Relaxing the in‐plane likelihood to a reasonable degree radically simplifies the shape of the expected‐value surface, lending itself for use in deghosting algorithms. The model can also be extended to other plane‐wave processing problems such as interpolation. 相似文献
13.
Overburden complexity and repeatability of seismic data: Impacts of positioning errors at the Oseberg field, North Sea 总被引：2，自引：0，他引：2
Repeatability of seismic data plays a crucial role in time‐lapse seismic analysis. There are several factors that can decrease the repeatability, such as positioning errors, varying tide, source variations, velocity changes in the water layer (marine data) and undesired effects of various processing steps. In this work, the complexity of overburden structure, as an inherent parameter that can affect the repeatability, is studied. A multi‐azimuth three‐dimensional vertical‐seismic‐profiling data set with 10 000 shots is used to study the relationship between overburden structure and repeatability of seismic data. In most repeatability studies, two data sets are compared, but here a single data set has been used because a significant proportion of the 10 000 shots are so close to each other that a repeatability versus positioning error is possible. We find that the repeatability decreases by a factor of approximately 2 under an overburden lens. Furthermore, we find that the X‐ and Y‐components have approximately the same sensitivity to positioning errors as the Z‐component (for the same events) in this three‐dimensional vertical‐seismic‐profiling experiment. This indicates that in an area with complex overburden, positioning errors between monitor and base seismic surveys are significantly more critical than outside such an area. This study is based on a three‐dimensional three‐component vertical‐seismic‐profiling data set from a North Sea reservoir and care should be taken when extrapolating these observations into a general four‐dimensional framework. 相似文献
14.
A new marine controlled‐source electromagnetic receiver with an acoustic telemetry modem and arm‐folding mechanism 
下载免费PDF全文
下载免费PDF全文 We developed a new marine controlled‐source electromagnetic receiver for detecting methane hydrate zones and oil and gas reservoirs on the seafloor, which is not imaged well by seismic reflection surveys. To determine the seafloor structure, the electromagnetic receiver should have low noise, power consumption, clock drift error, and operating costs while being highly reliable. Because no suitable receiver was available in our laboratory, we developed a new marine controlled‐source electromagnetic receiver with these characteristics; the receiver is equipped with acoustic telemetry modem and an arm‐folding mechanism to facilitate deployment and recovering operations. To demonstrate the applicability of our new receiver, we carried out a field experiment offshore of Guangzhou in the South China Sea, where methane hydrates have been discovered. We successfully obtained controlled‐source electromagnetic data along a profile about 13 km long. All six new receivers were recovered, and high‐quality electromagnetic data were obtained. Relatively high apparent resistivity values were detected. The results of the offshore field experiment support the claim that the electromagnetic data obtained using the new receiver are of sufficient quality for the survey target. 相似文献
15.
Although seismic sources typically consist of identical broadband units alone, no physical constraint dictates the use of only one kind of device. We propose an acquisition method that involves the simultaneous exploitation of multiple types of sources during seismic surveys. It is suggested to replace (or support) traditional broadband sources with several devices individually transmitting diverse and reduced frequency bands and covering together the entire temporal and spatial bandwidth of interest. Together, these devices represent a so‐called dispersed source array. As a consequence, the use of simpler sources becomes a practical proposition for seismic acquisition. In fact, the devices dedicated to the generation of the higher frequencies may be smaller and less powerful than the conventional sources, providing the acquisition system with increased operational flexibility and decreasing its environmental impact. Offshore, we can think of more manageable boats carrying air guns of different volumes or marine vibrators generating sweeps with different frequency ranges. On land, vibrator trucks of different sizes, specifically designed for the emission of particular frequency bands, are preferred. From a manufacturing point of view, such source units guarantee a more efficient acoustic energy transmission than today's complex broadband alternatives, relaxing the low‐ versus high‐frequency compromise. Furthermore, specific attention can be addressed to choose shot densities that are optimum for different devices according to their emitted bandwidth. In fact, since the sampling requirements depend on the maximum transmitted frequencies, the appropriate number of sources dedicated to the lower frequencies is relatively small, provided the signal‐to‐noise ratio requirements are met. Additionally, the method allows to rethink the way to address the ghost problem in marine seismic acquisition, permitting to tow different sources at different depths based on the devices' individual central frequencies. As a consequence, the destructive interference of the ghost notches, including the one at 0 Hz, is largely mitigated. Furthermore, blended acquisition (also known as simultaneous source acquisition) is part of the dispersed source array concept, improving the operational flexibility, cost efficiency, and signal‐to‐noise ratio. Based on theoretical considerations and numerical data examples, the advantages of this approach and its feasibility are demonstrated. 相似文献
16.
We apply interferometric theory to solve a three‐dimensional seismic residual statics problem to improve reflection imaging. The approach calculates the static solutions without picking the first arrivals from the shot or receiver gathers. The static correction accuracy can be significantly improved by utilising stacked virtual refraction gathers in the calculations. Shots and receivers may be placed at any position in a three‐dimensional seismic land survey. Therefore, it is difficult to determine stationary shots and receivers to form the virtual refraction traces that have identical arrival times, as in a two‐dimensional scenario. To overcome this problem, we use a three‐dimensional super‐virtual interferometry method for residual static calculations. The virtual refraction for a stationary shot/receiver pair is obtained via an integral along the receiver/shot lines, which does not require knowledge of the stationary locations. We pick the maximum energy times on the interferometric stacks and solve a set of linear equations to derive reliable residual static solutions. We further apply the approach to both synthetic and real data. 相似文献
17.
M. H. SAFAR 《Geophysical Prospecting》1984,32(2):228-235
The use of very long streamers in marine seismic surveys makes the response offset dependent. Line equalization networks are used to balance this effect. In this paper the response of the transformerless streamer system driving a charge amplifier is analyzed. Examples are given for a seismic cable 2500 m long, showing that the delay and the reduction in amplitude of the streamer impulse response in the absence of leakage are of the order of 1 ms and 0.6 dB, respectively. This means that the line equalization network currently used with the transformerless streamer system is not needed. We have also demonstrated that the presence of leakage resistance across the hydrophone group render the sensitivity of the transformerless streamer system offset dependent. 相似文献
18.
Ambient noise as the new source for urban engineering seismology and earthquake engineering: a case study from Beijing metropolitan area 下载免费PDF全文
下载免费PDF全文 In highly populated urban centers, traditional seismic survey sources can no longer be properly applied due to restrictions in modern civilian life styles. The ambient vibration noise, including both microseisms and microtremor, though are generally weak but available anywhere and anytime, can be an ideal supplementary source for conducting seismic surveys for engineering seismology and earthquake engineering. This is fundamentally supported by advanced digital signal processing techniques for effectively extracting the useful information out from the noise. Thus, it can be essentially regarded as a passive seismic method. In this paper we first make a brief survey of the ambient vibration noise, followed by a quick summary of digital signal processing for passive seismic surveys. Then the applications of ambient noise in engineering seismology and earthquake engineering for urban settings are illustrated with examples from Beijing metropolitan area. For engineering seismology the example is the assessment of site effect in a large area via microtremor observations. For earthquake engineering the example is for structural characterization of a typical reinforced concrete high-rise building using background vibration noise. By showing these examples we argue that the ambient noise can be treated as a new source that is economical, practical, and particularly valuable to engineering seismology and earthquake engineering projects for seismic hazard mitigation in urban areas. 相似文献
19.
Tor Arne Johansen Bent Ole Ruud Ronny Tømmerbakke Kristian Jensen 《Geophysical Prospecting》2019,67(3):532-549
Geophysical surveying of the Arctic will become increasingly important in future prospecting and monitoring of the terrestrial and adjacent areas in this hemisphere. Seismic data acquired on floating ice are hampered with extensive noise due to ice vibrations related to highly dispersive ice flexural waves generated by the seismic source. Several experiments have been conducted on floating ice in van Mijenfjorden in Svalbard in the Norwegian Arctic to specifically analyse the extent of flexural waves recorded with various seismic receivers and sources deployed both on top of ice and in the water below. The data show that flexural waves are severely damped at 5 m or deeper below the ice and hydrophone data suffer less from these vibrations compared with data recorded on the ice. Aliasing of single receiver hydrophone data can to some extent be suppressed using an in-line line source of detonating cord. Experiments on ice on shallow water show prominent guided wave modes often referred to as Scholte waves propagating along the seabed. In this case, both flexural and Scholte waves interfere and make a complicated pattern of coherent noise. On shallow water, the positioning and type of the seismic source must be evaluated with respect to the coherent noise generated by these waves. Geophone strings of 25 m effectively suppress both flexural and Scholte waves due to their relative short wavelengths. An airgun generates relative more low-frequency energy than a surface source of detonating cord. Accordingly, seismic mapping of deep seismic horizons seem to be best achieved using geophone strings of such length and an airgun source. For shallow targets, the use of hydrophones in combination with detonating cord is an appropriate solution. Seismic surveying in the Arctic always have to follow environmental restrictions of not disturbing or harming wildlife and not causing permanent footprints into the vulnerable tundra, which implies that the choice of seismic acquisition strategy might occur as a trade-off between optimum data quality and environmental constraints. 相似文献
20.
Field trial of seismic recording using distributed acoustic sensing with broadside sensitive fibre‐optic cables 下载免费PDF全文
下载免费PDF全文 J.C. Hornman 《Geophysical Prospecting》2017,65(1):35-46
Distributed acoustic sensing is an emerging technology using fibre‐optic cables to detect acoustic disturbances such as flow noise and seismic signals. The technology has been applied successfully in hydraulic fracture monitoring and vertical seismic profiling. One of the limitations of distributed acoustic sensing for seismic recording is that the conventional straight fibres do not have broadside sensitivity and therefore cannot be used in configurations where the raypaths are essentially orthogonal to the fibre‐optic cable, such as seismic reflection methods from the surface. The helically wound cable was designed to have broadside sensitivity. In this paper, a field trial is described to validate in a qualitative sense the theoretically predicted angle‐dependent response of a helically wound cable. P‐waves were measured with a helically wound cable as a function of the angle of incidence in a shallow horizontal borehole and compared with measurements with a co‐located streamer. The results show a similar behaviour as a function of the angle of incidence as the theory. This demonstrates the possibility of using distributed acoustic sensing with a helically wound cable as a seismic detection system with a horizontal cable near the surface. The helically wound cable does not have any active parts and can be made as a slim cable with a diameter of a few centimetres. For that reason, distributed acoustic sensing with a helically wound cable is a potential low‐cost option for permanent seismic monitoring on land. 相似文献