首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 562 毫秒
1.
Flowslides that override a liquefied substrate can vastly enhance a disaster after failure initiation. These effects may result from the rapid velocity and long runout distance from slides mobilized into flows. It is thus crucial to provide an improved understanding of the transformation mechanisms of catastrophic flowslides for hazard evaluation. This study examines the Saleshan landslide in Gansu, China, which occurred in 1983 and killed more than 200 people. The Saleshan landslide travelled for approximately 1 km due to pore water pressure generation resulting from overrunning and liquefication of the alluvial sands in the river valley below. We used geomorphologic and topographic maps to determine its dynamic features and mobilization behaviors on the landslide body, and placemarks and seismic signals to identify its approximate velocity at different sites. Electrical resistivity tomography (ERT) surveys also revealed the hydrogeological conditions post-landslide, showing a clear groundwater table along with the liquefied alluvial sand and gravel layers. Particle size distributions and triaxial shear behaviors confirmed more ready liquefaction of superficial loess and underlying alluvial sand in comparison with the red soil above and below them. Novel loading impact triaxial testing was also performed on the alluvial sand to elucidate its liquefaction potential in undrained and drained conditions. The alluvial sand was found to be markedly prone to liquefaction in undrained conditions due to impact-induced increased pore water pressure. The results further demonstrated that the Saleshan landslide underwent a transformation from a slowing slide on a steep slope, where it originated, to flow on a nearly flat terrace with abundant groundwater that it overrode. The transformation mechanism involved the liquefied alluvium sand substrate, which greatly enhanced the landslide mobility. Along with recent, similar findings from landslides globally, substrate liquefaction may result in a widespread, significant increase in landslide mobility and thus hazard, and the present study identifies the requisite conditions for this phenomenon to occur.  相似文献   

2.
Landsliding induced by earthquakes and rainstorms in montane regions is not only a sculptor for shaping the landscape, but also a driver for delivering sediments and above‐ground biomass downstream. However, the terrain attributes of earthquake‐ and rainstorm‐induced landslides are less discussed comprehensively in Taiwan. As part of an island‐wide inventory, we here compare and contrast the landslide terrain attributes resulting from two catastrophic events: the Chi‐Chi earthquake (M w = 7.6, September 1999) and typhoon Morakot (rainfall >2500 mm, August 2009). Results show that the earthquake‐induced landslides are relatively small, round‐shaped and prone to occur primarily in middle and toe of slopes. In contrast, the rainstorm‐induced landslides are larger, horseshoe‐shaped and preferentially occurring in slope toes. Also, earthquake‐induced landslides, particularly large landslides, are usually found at steeper gradients, whereas rainstorm‐induced landslides aggregate at gradients between 25° and 40°. Lithologic control plays a secondary role in landsliding. From an island‐wide perspective, high landslide density locates in the region of earthquake intensity ≥ VI or one‐day rainfall ≥600 mm day?1. Through the landslide patterns and their terrain attributes, our retrospective approach sheds light on accessing the historical and remote events for close geophysical investigations. Finally, we should bear in mind that the landslide location, size, and terrain attributes varying with triggers may affect the landscape evaluation or biogeochemical processes in landslide‐dominated regions. Copyright © 2017 John Wiley & Sons, Ltd.  相似文献   

3.
Most of the documented slope failures triggered by the 1980 Irpinia earthquake (Ms 6.9) occurred in the upper Sele valley epicentral area (southern Italy). The early investigations revealed some puzzling characteristics of the slope failure distribution, i.e., (i) the higher landslide concentration on the valley slopes located farther away from the earthquake fault; (ii) the predominance of re-activations over first-time movements. The analyses of factors controlling the landslide concentrations indicates that the differences in hydrological setting and in slope were the two main causal factors whereas the seismic shaking, according to the radiation pattern modelling, could have been characterised by a relatively low rate of decrease across the valley. The aspect of the slopes did not play a significant role. The differences in groundwater conditions between the western and eastern valley sides were probably enhanced by the earthquake. In addition to the probable pore-water pressure rise, the seismic shaking caused large increases in the flow of springs draining the western aquifer, and this made the adjacent flysch slopes more prone to landsliding. Data from the available literature suggest that the effects of earthquake-induced groundwater release on seismic landslide distribution is especially important for normal-fault events. The Sele valley case also indicates that the slope of the pre-existing landslides is an important factor controlling their susceptibility to seismic re-activations.  相似文献   

4.
Empirical prediction of coseismic landslide dam formation   总被引：1，自引：0，他引：1       下载免费PDF全文
In this study we develop an empirical method to estimate the volume threshold for predicting coseismic landslide dam formation using landscape parameters obtained from digital elevation models (DEMs). We hypothesize that the potential runout and volume of landslides, together with river features, determine the likelihood of the formation of a landslide dam. To develop this method, a database was created by randomly selecting 140 damming and 200 non‐damming landslides from 501 landslide dams and > 60 000 landslides induced by the Mw 7.9 2008 Wenchuan earthquake in China. We used this database to parameterize empirical runout models by stepwise multivariate regression. We find that factors controlling landslide runout are landslide initiation volume, landslide type, internal relief (H) and the H/L ratio (between H and landslide horizontal distance to river, L). In order to obtain a first volume threshold for a landslide to reach a river, the runout regression equations were converted into inverse volume equations by taking the runout to be the distance to river. A second volume threshold above which a landslide is predicted to block a river was determined by the correlation between river width and landslide volume of the known damming landslides. The larger of these two thresholds was taken as the final damming threshold. This method was applied to several landslide types over a fine geographic grid of assumed initiation points in a selected catchment. The overall prediction accuracy was 97.4% and 86.0% for non‐damming and damming landslides, respectively. The model was further tested by predicting the damming landslides over the whole region, with promising results. We conclude that our method is robust and reliable for the Wenchuan event. In combination with pre‐event landslide susceptibility and frequency–size assessments, it can be used to predict likely damming locations of future coseismic landslides, thereby helping to plan emergency response. Copyright © 2014 John Wiley & Sons, Ltd.  相似文献   

5.
The MW6.6 Arketao earthquake occurred on November 25, 2016 in Muji Basin of the Kongur extensional system in the eastern Pamir. The region is the Pamir tectonic knot, one of the two structural knots where the India plate collides with the Eurasian plate. This region is one of the most active areas in mainland China. The seismogenic structure of the earthquake is preliminarily determined as the Muji dextral-slip fault which locates in the north of Kongur extensional system. Based on field surveys of seismic geological hazard, and combined with the characteristics of high altitude area and the focal mechanism solution, this paper summarizes the associated distribution and development characteristics of sandy soil liquefaction, ground fissures, collapse, and landslide. There are 2 macroscopic epicenters of the earthquake, that is, Weirima village and Bulake village. There are a lot of geological hazards distributed in the macroscopic epicenters. Sand liquefaction is mainly distributed in the south of Kalaarte River, and area of sand liquefaction is 1 000m2. The liquefaction material gushed along the mouth of springs and ground fissures, because of the frozen soil below the surface. More than 60% of soil liquefactions are formed in the mouth of springs. According to the trenching, these liquefactions occurred in 1.8 meters underground in the gray green silty clay and silty sand layers. The ground fissures are mainly caused by brittle failure, and the deformation of upper frozen soil layer is caused by the deformation of lower soil layer. The ground fissures at Weirima village are distributed in a chessboard-like pattern in the flood plain of Kalaarte River. In the Bulake village, the main movement features of the ground fissure are tension and sinistral slip, and the directions of ground fissures are 90°~135°. The collapse and landslide are one of the important geological disasters in the disaster area. The rolling stones falling in landslide blocked the roads and smashed the wire rods, and the biggest rolling stone is 4 meters in length. We only found a small landslide in the earthquake area, but there are a large number of unstable slopes and potential landslides in the surroundings. The ground fissures associated with sand liquefaction are an important cause of serious damage to the buildings.  相似文献   

6.
The analysis of the positive feedback between landslides and erosion requires determination of the precise temporal and spatial relations between events of colluvium delivery and fluvial erosion. In our study we use decennial datasets on the occurrence of landsliding and erosion achieved through dendrochronological methods. Four sites covering areas of landslide slopes and adjacent valley floors with stream channels were studied. Landsliding on slopes was dated from the tree‐ring eccentricity developed in stems tilted due to bedrock instability. Erosion in channels was dated using the wood anatomy of roots exposed by erosion of the soil cover. Analysis of the temporal relations between dated landsliding, erosion and precipitation record has revealed that two types of repeating sequences can be observed: (1) rainfall → landsliding → erosion; (2) rainfall → erosion → landsliding. These sequences are an indication of the occurrence of slope‐channel positive feedback in the sites studied. In the first type, landsliding triggered by rainfall delivers colluvia into the valley floor and causes its narrowing, which in turn causes increased erosion. In the second type erosion triggered by rainfall disturbs the slope equilibrium and causes landsliding. Landsliding and erosion, once triggered by precipitation, can occur alternately in years with average precipitation and reinforce one another. Bidirectional coupling between landsliding and channel erosion was shown notably through the effects of channel shifting and forced sinuosity and by increased erosion of the slopes opposite the active landslides. Observations also suggest that the repetition of sequences described over longer periods of time can lead to a general widening of the valley floor at the expense of slopes and to a gradual change of the valley cross‐profile from narrow, V‐shaped into a wide flat‐bottomed. Thus landsliding–erosion coupling/positive feedback was recognized as an important factor shaping hillslope–valley topography of the mid‐mountain areas studied. Copyright © 2014 John Wiley & Sons, Ltd.  相似文献   

7.
During the 2003 Sanriku‐Minami earthquake, Japan, a flowslide was triggered on a slope of about 13.5º. The displaced landslide mass developed into a flowslide and deposited on a horizontal rice paddy after traveling approximately 130 m. To study the trigger and movement mechanisms of this landslide, field investigation and laboratory ring‐shear tests were performed. Field investigation revealed that the landslide originated from a fill slope, where a gully was buried for cultivation some decades ago, and shallow ground water was present. Undrained monotonic and cyclic ring‐shear tests on a sample (pyroclastic deposits) taken from the source area revealed that the soil is highly liquefiable, and its steady‐state shear strength can be little affected by overconsolidation. Using the seismic records of the earthquake, probable seismic loadings on the sliding surface were synthesized and applied to the samples in ring‐shear tests, which were performed under undrained or partially drained conditions. The undrained and partially drained tests revealed that shear failure can be triggered by the introduction of seismic loading and formation of excess pore‐water pressure. The generation of excess pore‐water pressure along with increase of shear displacement and the inhibited dissipation of excess pore‐water pressure due to the thickness of the saturated soil layer above the sliding surface probably enabled the continued post‐failure landsliding. Copyright © 2008 John Wiley & Sons, Ltd.  相似文献   

8.
Landslides in partially saturated colluvium on Seattle, WA, hillslopes have resulted in property damage and human casualties. We developed statistical models of colluvium and shallow‐groundwater distributions to aid landslide hazard assessments. The models were developed using a geographic information system, digital geologic maps, digital topography, subsurface exploration results, the groundwater flow modeling software VS2DI and regression analyses. Input to the colluvium model includes slope, distance to a hillslope–crest escarpment, and escarpment slope and height. We developed different statistical relations for thickness of colluvium on four landforms. Groundwater model input includes colluvium basal slope and distance from the Fraser aquifer. This distance was used to estimate hydraulic conductivity based on the assumption that addition of finer‐grained material from down‐section would result in lower conductivity. Colluvial groundwater is perched so we estimated its saturated thickness. We used VS2DI to establish relations between saturated thickness and the hydraulic conductivity and basal slope of the colluvium. We developed different statistical relations for three groundwater flow regimes. All model results were validated using observational data that were excluded from calibration. Eighty percent of colluvium thickness predictions were within 25% of observed values and 88% of saturated thickness predictions were within 20% of observed values. The models are based on conditions common to many areas, so our method can provide accurate results for similar regions; relations in our statistical models require calibration for new regions. Our results suggest that Seattle landslides occur in native deposits and colluvium, ultimately in response to surface‐water erosion of hillslope toes. Regional groundwater conditions do not appear to strongly affect the general distribution of Seattle landslides; historical landslides were equally dispersed within and outside of the area potentially affected by regional groundwater conditions. Published in 2007 by John Wiley & Sons, Ltd.  相似文献   

9.
Seepage erosion was investigated in an amphitheatre with a semicircular valley head, steep slopes, and a flat bottom developed in granodiorite hills at Obara, Aichi prefecture, Japan. A high sediment yield occurred where the measuring sites were located at the base of the landslide debris in the base of the convex slopes, whereas sediment outflows were small where the measuring sites were located at the base of the strong convex slopes. This implies that the seepage erosion was an effective agent for removal of debris deposited at the base of the slope. Small landslides can be found at the lower slopes within the area of the observed amphitheatre. The slope stability analysis and subsurface water observation of the lower slope suggest that the small landslides in this amphitheatre are due to over-steepened slopes, and relatively insensitive to subsurface water status. Colluvium in the flat valley bottom thinly covers the bedrock surface. Therefore the topography of the amphitheatre was found to be formed by parallel retreat of slopes by the repetition of basal seepage erosion and subsequent small landslides.  相似文献   

10.
Earthflow‐type landslides are persistent natural hazards having deep socio‐economic and environmental consequences. They have significantly contributed to the geomorphic evolution of mountainous slopes in Europe since the Late Glacial. An understanding of their complex kinematics is crucial to better constrain the processes governing their occurrence and mobility. In this work we explored the possibility to quantify displacement vectors on a spatially distributed basis and to quantify volumetric transfer at the slope scale with regard to a large flow‐type landslide located in the northern Apennines of Italy. For this purpose we applied digital image correlation (DIC) and digital elevation model differencing (DEMoD) techniques to multi‐temporal airborne LiDAR surveys of 2006, 2007 and 2009. The DIC was applied to greyscale slope gradient maps retrieved after precise co‐registration of LiDAR surveys. Thereby, movement patterns over various sectors of the landslide were reconstructed and quantified, most notably up to 20 m in the head zone, up to 51 m in the lower main track, and up to about 27 m at the landslide toe. The DEMoD analysis revealed significant mass transfer from the source to the tracks and toe zone, with the upper flow tracks acting as temporal storage of large amounts of material. The mass balance indicated that significant amounts of advancing landslide debris were eroded by a local stream. An integrated analysis of DEMoD and DIC results allowed for a discussion of governing processes, such as the transition from slide to flow, the influence of underlying topography on earthflow mobility, and the role of undrained loading as a mechanism of toe zone reactivation. In conclusion, the successful application of DIC and DEMoD to the case study underlines the added value of high‐resolution DEMs in the analysis of earthflow kinematics toward a better understanding of their role in the geomorphic evolution of slopes. Copyright © 2012 John Wiley & Sons, Ltd.  相似文献   

11.
On April 1, 1936, an M6¾ earthquake occurred on the Fangcheng-lingshan Fault. So far, the Lingshan M6¾ earthquake is the biggest one in South China. There are some reports about the Lingshan earthquake fissures, but its surface rupture hasn't been systemically studied. Based on the geological mapping and measurement of the right-lateral displacement and vertical offset, the surface rupture zone caused by the Lingshan M6¾ earthquake was found, which contains two secondary surface rupture zones in the east and west respectively, its strike varies from N55°E to N60°E with en echelon-like distribution along the north section of Lingshan Fault, and its total length is about 12.5km. The western surface rupture zone locates intermittently along Gaotang-Xiatang-Liumeng, about 9.4km in length, with a right-lateral displacement of 0.54~2.9m and a vertical offset of 0.23~1.02m; the other one appears between Jiaogenping and Hekou, about 3.1km in length, with a right-lateral displacement of 0.36~1.3m and a vertical offset of 0.15~0.57m. The maximum right-lateral displacement and vertical offset are 2.9m and 1.02m, appearing at the east of Xiatang reservoir. The types of surface rupture mainly contain earthquake fault, earthquake scarp, earthquake fissure, earthquake colluvial wedge, earthquake caused landslide and liquefaction of sand and so on. The earthquake fault develops at the east of Xiatang and Jiaogenping, earthquake scarp appears at Xiaoyilu and Xiatang, earthquake fissure locates at Xiatang, there are multiple earthquake landslides along the surface rupture zone, and the trench LSTC03 exposes the earthquake colluvial wedge. In order to further investigate the Lingshan earthquake surface rupture zones, the author compares the parameters of Lingshan M6¾ earthquake with the similar typical earthquakes in western China, the results show that the parameters of Lingshan earthquake are similar to the typical earthquakes in western China. The length of Lingshan earthquake surface rupture is shorter, but the dislocation is bigger. The author considers that this is mainly related with the parameters of Lingshan earthquake, site condition and structural environment of surface rupture zone, the symbols of dislocation measuring, human activity and weather condition and so on. The research of surface rupture zone features and analysis of Lingshan M6¾ earthquake provides important and basic data for exploring the seismogenic structure of Lingshan M6¾ earthquake, and it has important scientific significance.  相似文献   

12.
We examined the characteristics of landslides triggered by the 2016 Kumamoto earthquake (Mw = 7.0: focal depth=10.0 km) in forests and grasslands within two affected watersheds (Tokosegawa: 6.9 km2 and Nigorigawa: 6.1 km2) in southwestern Japan. We identified 190 landslides using aerial photographs and analyzed their sizes by geographic information system (GIS). Field investigations were conducted to obtain landslide depth, volume and residual sediment for 38 selected landslides (21 in forests and 17 in grasslands). The minimum area of detected landslides in grasslands (400 m2) was smaller than in forests (1000 m2), probably because of reduced detectability of landslides under tree cover. The ratio of total area occupied by landslides for a given range of slope gradient in the watersheds increased from 3.2% on gentle grassland slopes (10–15°) to 15.5% on steep (>45°) slopes, whereas the maximum landslide-area ratio in forest sites (7.4%) occurred on relatively gentle slopes (25–30°). Estimated landslide volume ranged from 27 to 9622 m3, based on mean depth of each landslide measured around individual landslide scars. Moreover, the volumetric ratio of landslide deposit volume to total landslide volume exceeded 100% for 48% of the landslides within forests and 35% of the landslides within grasslands. Our findings show that land cover had extensive and recognizable effects on the characteristics of landslides and resulting in-channel sediment accumulations. Resetting sediment dynamics after earthquakes associated with different land cover distributions needs to be considered within watersheds. © 2019 John Wiley & Sons, Ltd.  相似文献   

13.
  相似文献   

14.
基于颗粒流理论研究土质边坡动力稳定性及其滑动过程是近年来滑坡研究的一个新热点。在野外调查和室内试验的基础上,通过标定土体细观参数、模型建立、动力输入、动态监测等过程,利用PFC2D程序模拟了西吉县兴平乡堡湾村下马达子滑坡的失稳破坏运动过程,得到了该滑坡的破坏运动机理。得到如下结论:① 下马达子滑坡的失稳机制是在地震作用下斜坡前缘牵引、后缘推挤,使得坡肩受拉发生破坏,失稳后坡肩位置较大的速度和位移是地震滑坡破坏力强、致灾范围大的主要原因;② 黄土地震滑坡的滑坡后壁相对平缓,这是区别于重力滑坡的重要特征之一;③ 颗粒流模拟得到的滑坡前后相对高差和长度与实际情况较为吻合,因此,颗粒流方法可以用于地震滑坡滑距的预测。   相似文献   

15.
在对2013年4月20日芦山MS7.0地震灾区大量地震地质灾害实地考察及调查的基础上, 总结了滑坡、 崩塌、 砂土液化、 地裂缝、 地表变形等地震地质灾害的分布及发育特点, 探讨了地震地质灾害与发震断裂之间的关系. 极震区和重灾区的崩塌和滑坡特别严重, 是地震巨大破坏作用的外在表现形式; 砂土液化点较少, 分布范围和规模有限; 地裂缝和地表变形并非真正意义上的地震地表破裂带. 根据极震区和重灾区地震地质灾害的分布和发育特点, 认为芦山地震最有可能的发震断裂为龙门山前山断裂的双石—大川断裂, 也有可能是龙门山山前隐伏断裂的大邑断裂, 还有可能是双石—大川断裂与大邑断裂两者共同触发的结果.   相似文献   

16.
For sites susceptible to liquefaction induced lateral spreading during a probable earthquake, geotechnical engineers often need to know the undrained residual shear strength of the liquefied soil deposit to estimate lateral spreading displacements, and the forces acting on the piles from the liquefied soils in order to perform post liquefaction stability analyses. The most commonly used methods to estimate the undrained residual shear strength (Sur) of liquefied sand deposits are based on the correlations determined from liquefaction induced flow failures with SPT and CPT data. In this study, 44 lateral spread case histories are analyzed and a new relationship based on only lateral spread case histories is recommended, which estimates the residual shear strength ratio of the liquefiable soil layer from normalized shear wave velocity. The new proposed method is also utilized to estimate the residual lateral displacement of an example bridge problem in an area susceptible to lateral spreading in order to provide insight into how the proposed relationship can be used in geotechnical engineering practice.  相似文献   

17.
Strong earthquakes can not only trigger a large number of co-seismic landslides in mountainous areas, but also have an important impact on the development level of geological hazards in the disaster area. Usually, geological hazards caused by strong earthquakes will significantly increase and continue for a considerable period of time before they recover to the pre-earthquake level. Therefore, studying the evolution characteristics of landslides triggered by earthquake is particularly important for the prevention of geological disaster. In this paper, a 66km2 region in Yingxiu near the epicenter of the 2008 MS8.0 Wenchuan earthquake, which was strongly disturbed by the earthquake, was investigated. Firstly, one high-resolution satellite image before the earthquake(April, 2005) and five high-resolution satellite images after the earthquake(June, 2008; April, 2011; April, 2013; May, 2015; May, 2017)were used to interpret and catalog multi-temporal landslide inventories. Secondly, seven primary factors were analyzed in the GIS platform, including elevation, slope, aspect, curvature, stratum, lithology, and the distance from the nearest water system and the distance from seismogenic faults. Finally, the evolution of the landslide triggered by earthquake in this region was analyzed by comparing the landslide activity intensity in different periods, using the methods of correlation analysis, regression analysis, and single-factor statistical analysis. It was found that the total area of landslides in the study region decreased sharply from 2008 to 2017, with the area of the co-seismic landslide reducing from 21.41km2 to 1.33km2. This indicates that the magnitude of the landslides has recovered or is close to the pre-earthquake level. Moreover, correlation analysis shows that the elevation has a strong positive correlation with the distance from the nearest water system, and a weak positive correlation with the area. Meanwhile, there is a weak negative correlation between the distance from the nearest water system and the distance from seismogenic faults. Overall, the degree of landslide activity in the study region decreased over time, as well as the number of reactivated landslides and new landslides. The region where the area of earthquake triggered landslides decreased mainly concentrated at an elevation of 1 000m to 2 100m, a slope of 30° to 55°, an aspect of 40° to 180°, and a curvature of -2 to 2. In addition, the lithology of the Pengguan complex in the Yingxiu study region is more conducive to the occurrence of landslides, while the sedimentary rock is more conducive to the landslide recovery. When the distance from the nearest water system is more than 1 600m, the effect of the water system on the landslides gradually decreases. Also, the landslides triggered by Wenchuan earthquake in this area have the characteristics of the hanging wall effect, which means, the number of landslides in the northwestern region is much higher than that in the southeast side.  相似文献   

18.
On August 3, 2014, an MW6.5 earthquake occurred in Ludian County, Yunnan Province, which triggered significant landslides and caused serious ground damages and casualties. Compared with the existing events of earthquake-triggered landslides, the spatial distribution of co-seismic landslides during the Ludian earthquake showed a special pattern. The relationship between the co-seismic landslides and the epicenter or the known faults is not obvious, and the maximum landslide density doesn't appear in the area near the epicenter. Peak ground acceleration (PGA), which usually is used to judge the limit boundary of co-seismic landslide distribution, cannot explain this distribution pattern. Instead of correlating geological and topographic factors with the co-seismic landslide distribution pattern, this study focuses on analyzing the influence of seismic landslide susceptibility on the co-seismic distribution. Seismic landslide susceptibility comes from a calculation of critical acceleration values using a simplified Newmark block model analysis and represents slope stability under seismic loading. Both DEM (SRTM 90m)and geological map (1 ︰ 200￣￣000)are used as inputs to calculate critical acceleration values. Results show that the most susceptible slopes with the smallest critical accelerations are generally concentrated along the banks of rivers. The stable slopes, which have the larger critical accelerations and are comparably stable, are in the places adjacent to the epicenter. Comparison of the distribution of slope stability and the real landslides triggered by the 2014 MW6.1 Ludian earthquake shows a good spatial correlation, meaning seismic landslide susceptibility controls the co-seismic landslide distributions to a certain degree. Moreover, our study provides a plausible explanation on the special distribution pattern of Ludian earthquake triggered landslides. Also the paper discusses the advantages of using the seismic landslide susceptibility as a basic map, which will offer an additional tool that can be used to assist in post-disaster response activities as well as seismic landslides hazards zonation.  相似文献   

19.
This paper presents a landslide incidence zonation map showing the percentage of underlying material involved in mass‐movement processes in the Rio Mendoza valley, Argentina. The landslide incidence zonation map was derived from an inventory map of landslides and reveals that many areas of the Rio Mendoza valley are implicated in this kind of process. A correlation has been found between the occurrence of landslides, earthquakes, and rainfall. The relation between lithology and landslides is clear: areas covered by friable sedimentary and volcanic rocks of the Choiyoi Group are prone to debris ?ows and complex landslides. The slope map has been ranked and a general relation between slope and type of event is shown. Falls commonly develop in high‐angle slopes. Copyright © 2004 John Wiley & Sons, Ltd.  相似文献   

20.
Analysis of mapped landslide locations using a high‐resolution (5‐m grid) digital elevation model (DEM) in the Tachia River basin, Taiwan, finds distinct differences in the topographic locations and size of landslides during the 1999 Chi‐Chi earthquake and the 2001 Toraji typhoon. Our analysis supports Densmore and Hovius' hypothesis that earthquake‐induced landslides cluster near ridgetops due to topographic amplification of ground shaking, and that typhoon‐induced landslides occur with greater frequency lower on slopes. In addition, the differing topographic locations of seismically‐induced and subsequent typhoon‐induced landslides shows no evidence of residual post‐earthquake influences on landslides during typhoon Toraji previously hypothesized for drainage basins closer to the earthquake epicenter. Our results support the interpretation that in this tectonically active landscape, seismically‐induced landslides help shatter and erode ridgetops but typhoon‐triggered landslides concentrate erosion farther downslope, with the combination acting to more uniformly lower upland terrain than either process does individually. Copyright © 2013 John Wiley & Sons, Ltd.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号