共查询到20条相似文献，搜索用时 671 毫秒
1.
Seismic behavior of inclined piles has been considered detrimental for years. However, recent researches show that battered piles can have a beneficial effect. In this framework, a series of centrifuge tests on an inclined pile group is performed. The analysis is based on the comparative response of two 2×1 simplified pile groups: one with vertical piles and the other with one vertical and one inclined pile. The response of these pile groups to repeated earthquakes or sinusoidal inputs is analyzed through the response frequencies, the envelop curves of bending moment profiles, the axial loads measured in both piles and the kinematic response of the cap. Results highlight that the effect of inclined pile is highly influenced by the frequency content of the input. In addition, the inclined pile induces non-negligible residual bending moments, higher horizontal stiffness at the pile cap and larger rotation. 相似文献
2.
The influence of inclined piles on the dynamic response of deep foundations and superstructures is still not well understood and needs further research. For this reason, impedance functions of deep foundations with inclined piles, obtained numerically from a boundary element–finite element coupling model, are provided in this paper. More precisely, vertical, horizontal, rocking and horizontal–rocking crossed dynamic stiffness and damping functions of single inclined piles and 2 × 2 and 3 × 3 pile groups with battered elements are presented in a set of plots. The soil is assumed to be a homogeneous viscoelastic isotropic half‐space and the piles are modeled as elastic compressible Euler–Bernoulli beams. The results for different pile group configurations, pile–soil stiffness ratios and rake angles are presented. Copyright © 2010 John Wiley & Sons, Ltd. 相似文献
3.
The seismic response of pile foundations is a very complex process involving inertial interaction between structure and pile foundation, kinematic interaction between piles and soils, seismically induced pore-water pressures (PWP) and the non-linear response of soils to strong earthquake motions. In contrast, very simple pseudo-static methods are used in engineering practice to determine response parameters for design. These methods neglect several of the factors cited above that can strongly affect pile response. Also soil–pile interaction is modelled using either linear or non-linear springs in a Winkler computational model for pile response. The reliability of this constitutive model has been questioned. In the case of pile groups, the Winkler model for analysis of a single pile is adjusted in various ways by empirical factors to yield a computational model for group response. Can the results of such a simplified analysis be adequate for design in all situations?The lecture will present a critical evaluation of general engineering practice for estimating the response of pile foundations in liquefiable and non-liquefiable soils during earthquakes. The evaluation is part of a major research study on the seismic design of pile foundations sponsored by a Japanese construction company with interests in performance based design and the seismic response of piles in reclaimed land. The evaluation of practice is based on results from field tests, centrifuge tests on model piles and comprehensive non-linear dynamic analyses of pile foundations consisting of both single piles and pile groups. Studies of particular aspects of pile–soil interaction were made. Piles in layered liquefiable soils were analysed in detail as case histories show that these conditions increase the seismic demand on pile foundations. These studies demonstrate the importance of kinematic interaction, usually neglected in simple pseudo-static methods. Recent developments in designing piles to resist lateral spreading of the ground after liquefaction are presented. A comprehensive study of the evaluation of pile cap stiffness coefficients was undertaken and a reliable method of selecting the single value stiffnesses demanded by mainstream commercial structural software was developed. Some other important findings from the study are: the relative effects of inertial and kinematic interactions between foundation and soil on acceleration and displacement spectra of the super-structure; a method for estimating whether inertial interaction is likely to be important or not in a given situation and so when a structure may be treated as a fixed based structure for estimating inertial loads; the occurrence of large kinematic moments when a liquefied layer or naturally occurring soft layer is sandwiched between two hard layers; and the role of rotational stiffness in controlling pile head displacements, especially in liquefiable soils. The lecture concludes with some recommendations for practice that recognize that design, especially preliminary design, will always be based on simplified procedures. 相似文献
4.
Cristina Medina Luis A. Padrón Juan J. Aznárez Ariel Santana Orlando Maeso 《地震工程与结构动力学》2014,43(13):2035-2050
The beneficial or detrimental role of battered piles on the dynamic response of piled foundations has not been yet fully elucidated. In order to shed more light on this aspect, kinematic interaction factors of deep foundations with inclined piles, are provided for single‐battered piles, as well as for 2 × 2 and 3 × 3 groups of piles subjected to vertically incident plane shear S waves. Piles are modelled as linear‐elastic Bernoulli beams, whereas soil is assumed to be a linear, isotropic, homogeneous viscoelastic half‐space. Different pile group configurations, pile‐soil stiffness ratios, and rake angles are considered. The relevance and main trends observed in the influence of the rake angle on the kinematic interaction factors of the analysed foundations are inferred from the presented results. An important dependence of the kinematic interaction factors on the rake angle is observed together with the existence of an inclination angle at which cap rotation and excitation become out of phase in the low‐to‐mid frequency range. The existence of a small batter angle that provides minimum cap rotation is also shown. Copyright © 2014 John Wiley & Sons, Ltd. 相似文献
5.
6.
A substructuring method has been implemented for the seismic analysis of bridge piers founded on vertical piles and pile groups in multi-layered soil. The method reproduces semi-analytically both the kinematic and inertial soil–structure interaction, in a simple realistic way. Vertical S-wave propagation and the pile-to-pile interplay are treated with sufficient rigor, within the realm of equivalent-linear soil behaviour, while a variety of support conditions of the bridge deck on the pier can be studied with the method. Analyses are performed in both frequency and time domains, with the excitation specified at the surface of the outcropping (‘elastic’) rock. A parameter study explores the role of soil–structure interaction by elucidating, for typical bridge piers founded on soft soil, the key phenomena and parameters associated with the interplay between seismic excitation, soil profile, pile–foundation, and superstructure. Results illustrate the potential errors from ignoring: (i) the radiation damping generated from the oscillating piles, and (ii) the rotational component of motion at the head of the single pile or the pile-group cap. Results are obtained for accelerations of bridge deck and foundation points, as well as for bending moments along the piles. © 1997 by John Wiley & Sons, Ltd. 相似文献
7.
Evidence of beneficial role of inclined piles: observations and summary of numerical analyses 总被引：1，自引：0，他引：1
Nikos Gerolymos Amalia Giannakou Ioannis Anastasopoulos George Gazetas 《Bulletin of Earthquake Engineering》2008,6(4):705-722
The behaviour under seismic loading of inclined piles embedded in two idealized soil profiles, a homogeneous and a non-homogenous
“Gibson” soil, is analysed with 3D finite elements. Two structures, modeled as single-degree-of-freedom oscillators, are studied:
(1) a tall slender superstructure (H
st = 12 m) whose crucial loading is the overturning moment, and (2) a short structure (H
st = 1 m) whose crucial loading is the shear force. Three simple two-pile group are studied: (a) one comprising a vertical pile
and a pile inclined at 25°, (b) one consisting of two piles symmetrically inclined at 25°, and (c) a group of two vertical
piles. The influence of key parameters is analysed and non-dimensional diagrams are presented to illustrate the role of raked
piles on pile and structure response. It is shown that this role can be beneficial or detrimental depending on a number of
factors, including the slenderness of the superstructure and the type of pile-to-cap connection. 相似文献
8.
The paper presents a numerical model for the dynamic analysis of pile groups with inclined piles in horizontally layered soil deposits. Piles are modelled with Euler–Bernoulli beams, while the soil is supposed to be constituted by independent infinite viscoelastic horizontal layers. The pile–soil–pile interaction as well as the hysteretic and geometric damping is taken into account by means of two‐dimensional elastodynamic Green's functions. Piles cap is considered by introducing a rigid constraint; the condensation of the problem permits a consistent derivation of both the dynamic impedance matrix of the soil–foundation system and the foundation input motion. These quantities are those used to perform inertial soil–structure interaction analyses in the framework of the substructure approach. Furthermore, the model allows evaluating the kinematic stress resultants in piles resulting from waves propagating in the soil deposit, taking into account the pile–soil–pile interactions. The model validation is carried out by performing accuracy analyses and comparing results in terms of dynamic impedance functions, kinematic response parameters and pile stress resultants, with those furnished by 3D refined finite element models. To this purpose, classical elastodynamic solutions are adopted to define the soil–pile interaction problem. The model results in low computational demands without significant loss of precision, compared with more rigorous approaches or refined finite element models. Copyright © 2015 John Wiley & Sons, Ltd. 相似文献
9.
Simple formulas are derived for the dynamic stiffness of pile group foundations subjected to horizontal and rocking dynamic loads. The formulations are based on the construction of a general model of impedance matrices as the condensation of matrices of mass, damping, and stiffness, and on the identification of the values of these matrices on an extensive database of numerical experiments computed using coupled finite element–boundary element models. The formulations obtained can be readily used for the design of both floating piles on homogeneous half‐space and end‐bearing piles and are applicable for a wide range of mechanical and geometrical parameters of the soil and piles, in particular for large pile groups. For the seismic design of a building, the use of the simple formulas rather than a full computational model is shown to induce little error on the evaluation of the response spectra and time histories. Copyright © 2009 John Wiley & Sons, Ltd. 相似文献
10.
In this paper, a soil–pile–structure model is tested on a shaking table subject to both a sinusoidal wave and the acceleration time history of the scaled 1940 El Centro earthquake. A medium-size river sand is compacted into a 1.7-m-high laminar rectangular tank to form a loose fill with a relative density of 15%. A single-storey steel structure of 2.54 ton is placed on a concrete pile cap, which is connected to the four end-bearing piles. A very distinct pounding phenomenon between soil and pile is observed; and, the acceleration response of the pile cap can be three times larger than that of the structural response. The pounding is due to the development of a gap separation between soil and pile, and the extraordinary large inertia force suffered at the top of the pile also induces cracking in the pile. To explain this observed phenomenon, nonlinear finite element method (FEM) analyses with a nonlinear gap element have been carried out. The spikes in the acceleration response of the pile cap caused by pounding can be modeled adequately by the FEM analyses. The present results suggest that one of the probable causes of pile damages is due to seismic pounding between the laterally compressed soil and the pile near the pile cap level. 相似文献
11.
This paper presents a parametric study that looks into the influence of pile rake angle on the kinematic internal forces of deep foundations with inclined piles. Envelopes of maximum kinematic bending moments, shear forces and axial loads are presented along single inclined piles and 2 × 2 symmetrical square pile groups with inclined elements subjected to an earthquake generated by vertically incident shear waves. Inclination angles from 0° to 30° are considered, and three different pile–soil stiffness ratios are studied. These results are obtained through a frequency–domain analysis using a boundary element–finite element code in which the soil is modelled by the boundary element method as a homogeneous, viscoelastic, unbounded region, and the piles are modelled by finite elements as Euler–Bernoulli beams. The rotational kinematic response of the pile foundations is shown to be a key factor on the evolution of the kinematic internal forces along the foundations. Copyright © 2015 John Wiley & Sons, Ltd. 相似文献
12.
基于相同土层结构地基条件下,分别采用低承台群桩-独柱墩与高承台群桩-独柱墩结构,完成了两次可液化场地群桩-土-桥梁结构地震反应振动台试验,据此研究了承台型式对桥梁桩-柱墩地震反应的影响。研究表明,与高承台桩相比,可液化场地中低承台桩的抗震性能更优;地震中砂层尚未液化或液化不充分时,低承台更多表现出减弱桩尤其桩上段的加速度反应的作用,相反高承台更多起到放大桩的加速度作用,而高承台桩与低承台桩的峰值应变自下而上更多表现出逐渐增大趋势;即使砂层完全液化时,低承台桩的峰值应变自下而上仍以渐增为主;与低承台桩相比,高承台桩更有助于放大墩顶加速度、位移反应,对结构体系整体稳定性产生了不良影响;虽然低承台桩未出现严重破坏,但砂层中部桩的应变却很大,液化砂土-桩运动相互作用对桩的抗震性能影响不容忽视。 相似文献
13.
This paper presents results of one-g shake-table tests on scoured pile-group-supported bridge models in saturated (liquefiable) and dry (nonliquefiable) sands. The primary objective is to reveal the influence of liquefaction on seismic demands and failure mechanism of scoured bridges. To this end, two identical models, each consisting of a 2 × 2 reinforced concrete pile-group with a center-to-center spacing of 3 times pile diameter, a cap and a single pier with a lumped iron block, were constructed and embedded into saturated and dry sands, respectively, with the same scour depth of 4 times pile diameter. Typical test results, including excess pore pressure, acceleration and displacement demands are interpreted first, followed by the focus on curvature demands and associated seismic failure mechanism identification. Finally, inertial and kinematic effects on pile curvature demands are estimated using cross-correlation analyses. Results show that near-pile liquefied soils exhibit more remarkable dilation tendency as compared to far field. For bridges under the given scour depth, soil liquefaction tends to significantly affect the failure modes via transferring damage positions from pier bottom to pile head and meanwhile from underground pile to pile head. In addition, pile group effects appear to be significant in nonliquefiable soils while to be relatively inessential in liquefied soils. Moreover, the inertial effect is more prominent in nonliquefiable soils, while the kinematic effect itself generally appears to be more significant in liquefiable soils. The test results can be used to validate numerical models for future studies. 相似文献
14.
Influences of type of wave and angle of incidence on seismic bending moments in pile foundations 
下载免费PDF全文
下载免费PDF全文 When analysing the seismic response of pile groups, a vertically‐incident wavefield is usually employed even though it does not necessarily correspond to the worst case scenario. This work aims to study the influences of both the type of seismic body wave and its angle of incidence on the dynamic response of pile foundations. To this end, the formulation of SV, SH and P obliquely‐incident waves is presented and implemented in a frequency‐domain boundary element‐finite element code for the dynamic analysis of pile foundations and piled structures. Results are presented in terms of bending moments at cap level of single piles and 3 × 3 pile groups, both in frequency and in time domains. It is found that, in general, the vertical incidence is not the most unfavourable situation. In particular, obliquely‐incident SV waves with angles of incidence smaller than the critical one, a situation in which the mechanism of propagation of the waves in the soil changes and surface waves appear, yield bending moments much larger than those obtained for vertically‐incident wavefields. It is also shown that the influence of pile‐to‐pile interaction on the kinematic bending moments becomes significant for non‐vertical incidence, especially for P and SV waves. Copyright © 2013 John Wiley & Sons, Ltd. 相似文献
15.
深入分析土-大直径扩底灌注桩体系动力相互作用机理是地震工程的重要研究内容。本文采用快速拉格朗日FLAC~(3D)有限差分程序建立地震荷载作用下扩底桩-土和等直径桩-土动力相互作用体的三维数值模型,分析大直径扩底桩与普通等直径桩地震反应的差异。桩周土采用Mohr-Coulomb弹性模型以考虑土体的非线性,桩体采用线弹性模型,桩与桩周土之间采用"切割模型"法设置桩土间接触面。输入5·12汶川地震波,对两种桩基的地震反应进行了数值计算与分析。结果表明:扩底桩的抗震性能优于等直径桩;与具有显著差异的加速度时程曲线相比,扩底桩对位移动力响应并不敏感。 相似文献
16.
The effect of soil inhomogeneity and material nonlinearity on kinematic soil–pile interaction and ensuing bending under the passage of vertically propagating seismic shear waves in layered soil, is investigated by means of 1-g shaking table tests and nonlinear numerical simulations. To this end, a suite of scale model tests on a group of five piles embedded in two-layers of sand in a laminar container at the shaking table facility in BLADE Laboratory at University of Bristol, are reported. Results from white noise and sine dwell tests were obtained and interpreted by means of one-dimensional lumped parameter models, suitable for inhomogeneous soil, encompassing material nonlinearity. A frequency range from 0.1 Hz to 100 Hz and 5 Hz to 35 Hz for white noise and sine dwell tests, respectively, and an input acceleration range from 0.015 g to 0.1 g, were employed. The paper elucidates that soil nonlinearity and inhomogeneity strongly affect both site response and kinematic pile bending, so that accurate nonlinear analyses are often necessary to predict the dynamic response of pile foundations. 相似文献
17.
本文对分层弹性地基中端承桩基础按Ｗｉｎｋｌｅｒ（温克尔）地基土模型，通过特性分析，建立了合理的力学模型，经过动力分析，给出了端承桩基础横向自由振动特性及在横向动力载荷与地震载荷作用下强迫反应的解析解。文中的解析公式为分层弹性地基中端承桩基础在横向动力载荷与地震载荷作用下的动力反应分析，提供了一种新的解析方法。 相似文献
18.
针对振动台试验,采用u-p形式控制方程表述饱和砂土的动力属性,选用土的多屈服面塑性本构模型刻画饱和砂土和黏土的力学特性,引入非线性梁-柱单元模拟桩,建立试验受控条件下液化场地群桩-土强震相互作用分析的三维有限元模型,并通过试验结果验证数值建模途径与模拟方法的正确性。以实际工程中常用的2×2群桩为例,建立桩-土-桥梁结构强震反应分析三维有限元模型。基于此,针对不同群桩基础配置对液化场地群桩-土强震相互作用影响展开具体分析。对比发现,桩的数量相同时,桩排列方向与地震波输入方向平行时比垂直时桩基受力减小5%~10%,而对场地液化情况无明显影响;相同排列形式下,三桩模型中土体出现液化的时间约比双桩模型延缓5s,桩上弯矩和剪力减小33%~38%。由此可见,桩基数量增加,桩-土体系整体刚度更大,场地抗液化性能显著,桩基对上部桥梁结构的承载性能明显增强,其安全性与可靠性更高。这对实际桥梁工程抗震设计具有一定的借鉴意义。 相似文献
19.
To investigate the seismic response of a pile group during liquefaction, shaking table tests on a 1/25 scale model of a 2 × 2 pile group were conducted, which were pilot tests of a test project of a scale-model offshore wind turbine with jacket foundation. A large laminar shear box was utilized as the soil container to prepare a liquefiable sandy ground specimen. The pile group model comprising four slender aluminum piles with their pile heads connected by a rigid frame was designed with similitude considerations focusing on soil–pile interaction. The input motions were 2-Hz sinusoids with various acceleration amplitudes. The excess pore water pressure generation indicated that the upper half of the ground specimen reached initial liquefaction under the 50-gal-amplitude excitation, whereas in the 75-gal-amplitude test, almost entire ground was liquefied. Accelerations in soil, on the movable frames composing the laminar boundary of the shear box, and along the pile showed limited difference at the same elevation before liquefaction. After liquefaction, the soil and the movable-frame accelerations that represented the ground response considerably reduced, whereas both the movable frames and the piles exhibited high-frequency jitters other than 2-Hz sinusoid, and meantime, remarkable phase difference between the responses of the pile group and the ground was observed, all probably due to the substantial degradation of liquefied soil. Axial strains along the pile implied its double-curvature bending behavior, and the accordingly calculated moment declined significantly after liquefaction. These observations demonstrated the interaction between soil and piles during liquefaction. 相似文献
20.
Topography effects on the vertical vibration responses of pile group are revealed though numerical analysis and model tests.First,a series of model tests with different topography of ground and bedrock are conducted.The results indicate that displacement amplitude of the pile head in sloping ground topography is larger than in horizontal ground.Differential displacement at various positions of the pile cap is observed in non-horizontal topography.Afterwards,a numerical algorithm is employed to further explore the essential response characteristics in group piles of different topography configurations,which has been verified by the test results.The lengths of the exposed and frictional segment,together with the thickness of the subsoil layer,are the dominant factors which cause non-axisymmetric vibration at the pile cap. 相似文献