首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 78 毫秒
1.
针对结构动态响应监测三维变形的需求,研究立体视觉三维测量算法,建立基于结构测面的世界坐标系,得到结构振动响应三维位移公式.研究圆形标识点边缘检测、中心拟合及匹配约束算法,编译基于MATLAB平台的立体视觉结构振动测试分析软件.使用本文集成的立体视觉测量系统完成不同加速度峰值Taft波及El Centro波作用下砌体房屋模型振动台试验,同时测得结构三维位移时程曲线.面内位移时程曲线表明立体视觉方法与位移计数据吻合非常好,证实立体视觉测量方法的有效性.离面位移时程曲线表明砌体房屋模型在地震动作用下发生扭转,且随地震动加速度峰值增大,扭转反应加剧,充分验证立体视觉方法用于监测结构三维振动响应的可靠性及实用性.  相似文献   

2.
对应地震反应谱的当量功率谱密度函数的数值算法   总被引:2,自引:0,他引:2  
提出根据地震反应谱曲线求解当量功率谱密度函数曲线的一种数值算法,为结构随机地震反应分析中确定和计算地面运动功率谱密度提供依据。在相对位移谱与结构相对位移响应峰值的均值之间建立联系;在现有迭代方法的基础上,对算法公式作进一步的推导和整理,将迭代计算转变为线性方程组的求解计算,进而避免迭代方法的不收敛。通过对数值计算结果的分析发现,由于规范反应谱曲线存在斜率突变,采用本文算法计算出的功率谱密度曲线在规范反应谱曲线的两端和分段转折点处会出现倍周期分岔甚至混沌现象。为此建议适当增加低频范围内离散频率点的数目,且采取整体光滑的反应谱曲线,从而提高计算结果的稳定性。  相似文献   

3.
性态点的数值解法   总被引:2,自引:0,他引:2  
目前求解性态点处位移的方法均为图形方法,而且多数需迭代才能完成。本文提出一种求解性态点处位移的数值方法。并将本文方法与能力谱法求出的位移值进行比较。比较结果说明本文所提方法不但正确而且求法简单。  相似文献   

4.
首先利用虚拟激励法推导了仅考虑行波效应下多点输入反应谱表达式,重点对多点输入反应谱中动位移耦合系数ρijpq及拟静位移耦合系数ρSpq的计算方法及其特性进行了研究。为了避免繁琐的积分运算,提出了一种"拟合+插值"的耦合系数计算方法,不但精度高,而且大大提高了计算效率。研究表明,ρijpq相对于地震波到达支座点的时差Δt具有明显的三角函数的关系;从总体趋势上看,ρijpq绝对值基本随ωj/ωi的增大而减少,这一点与一致输入时的振型耦联系数ρij相同。在仅考虑行波效应的情况下,可以认为,各支座点的拟静力位移完全相关,即ρSpq=1,结构拟静力位移谱与地震动的位移谱相同。  相似文献   

5.
本文针对罕遇地震作用下,直接基于位移设计的预应力混凝土框架在“防止倒塌”性能水准下结构目标位移不能有效控制的问题进行研究.通过理论分析和预应力混凝土框架结构的设计实例模拟计算,总结出影响结构目标位移有效控制的主要原因有结构承载能力超强和性能点时刻位移模式与设计位移模式误差较大两个方面.结构承载能力超强是影响框架层间位移角有效控制的主要原因,位移模式误差则是通过影响等效单自由度体系的等效目标位移而影响目标位移的有效控制.文中提出了考虑强柱弱梁调整、材料强度取值以及其他构造措施等影响的基底剪力折减计算公式,以及采用结构在性能点时刻的位移模式对设计位移模式进行修正的改进方法,算例表明目标位移和其他各项性能参数的控制均得到了非常明显的改善.  相似文献   

6.
<正>震后野外考察表明,走滑断层同震引起的地表变形主要集中在断层两侧很窄的范围,为定量研究同震地表强变形分布特征与破裂带宽度,以鲜水河断裂北西段为原型设计了一个简化的三维黏弹有限元模型,断层遵从库仑滑动定律,断层长度20 km,走向320°,厚度11 km,两侧各宽3 km。由已知地震断层面的突然错动在地表引起的位移分布,求出任意相邻两点之间的位移量差值,即变形量,它是依赖于两点间距离的变量。对于空间相邻两点di和di+1,其水平位移差hi为hi+1-hi;垂向位移差为Zi+1-Zi。总位移差di  相似文献   

7.
断层地表潜在突发位移的概率评价初探   总被引:1,自引:1,他引:0       下载免费PDF全文
冉洪流  周本刚 《地震地质》2004,26(1):133-140
目前跨活动断层的线状工程的抗断设防仍采用确定性评价方法 ,考虑的是最大位错量 ,与抗御灾害的风险设计的实际要求不相符。文中将断层上最大位错点的位置分布及最大位错点两侧的位错展布 ,与可产生地表突发位移的强震复发模型联合 ,建立了评估活动断层各部位的地表潜在突发位移的概率性评价方法。最后 ,以怀涿盆地北缘正断裂中的沈庄 -长疃段为例 ,对其未来 10 0a潜在突发位移的危险性做出定量评估 ,给出了断层段上各点不同超越概率水平下的潜在位移。这一研究结果 ,可为跨断裂的线型工程进行抗御地表潜在突发位移的风险设计提供参考  相似文献   

8.
在材料和模型实验中,试样内部位移场的精确量测对于加载过程中试样力学性质的研究有着十分重要的意义。提出基于能量最小化原理的弹性波CT成像频域有限元反演算法,并在波动方程的基础上通过有限元数值实验,利用估计位移场和实际位移场的偏差,得出包括密度ρ和拉梅常数λ在内的单元材料参数的更新梯度,进一步经过若干次正负反馈的迭代,实现试样参数的反演。该算法避开已有方法中求解参数更新梯度Jacobi矩阵的过程,计算效率得到极大的提高。计算结果表明,在已知位移场的情况下,迭代更新λ的效率和准确性较高;在已知部分节点实际位移的情况下,参数迭代效率与观测网格密度正相关。  相似文献   

9.
地震地表破裂位移测量的一种方法   总被引:2,自引:1,他引:2  
本文引进了广义的水平位移概念,并据此提出地震地表破裂带一(微)段上的位移量取方法,即用次级破裂端部推挤区或拉分区内的构造水平位移近似代替两侧次级破裂上的水平位移;破裂带上一(微)段的水平位移等于通过该点垂直于破裂带走向方向上的数条破裂的位移之和。  相似文献   

10.
在用地形变资料研究地震的震源过程以及地壳形变与地震的关系上,不少学者进行了研究。一般利用实测的地面位移场与根据弹性位错理论推导出理论位移场,采用试算法反复进行对比得到。此外,由于在三角平差计算中会得到不同的位移场,文献[2]应  相似文献   

11.
动力刚度计算方法-"盐溶”法-的改进   总被引:1,自引:0,他引:1  
本文首先讨论了采用盐溶法(damping-solvent extraction method)争动力刚度时,在某些频率点(奇点)产生误差的原因;提出一种多次逼近的改进办法,提高了计算精度。在一般情况下,动力刚度的奇点是未知的。本文建议的逼近技术可用于校核这一方法所获得的结果。  相似文献   

12.
本文在矿井直流电法理论基础上,推导环工作面三维直流电法测量深度公式,得到环工作面三维直流电法记录点坐标位置.基于以上理论,建立了环工作面三维直流电法异常体模型,分析了环工作面三维直流电法二极装置、三极装置、四极装置异常体响应特征,得出环工作面三维直流电法各装置敏感度低的主要原因是缺少必要的数据采集点.为了提高环工作面三维直流电法分辨率,最大限度增加工作面内侧的采集数据点.基于以上原因本文提出了对角偶极装置采集模式及多装置的数据叠加反演处理方法,以增加工作面内采集数据点,提高三维勘探的精度.本文通过某矿8802工作面底板富水性探查实例,说明该方法的有效性.  相似文献   

13.
韩召华 《地震工程学报》2020,42(2):552-557,578
利用GIS技术对地震危险等级进行评定时,由于其地形控制点选取合理性较差,导致其所采集遥感图像清晰度较低,地震等级评定不够精准。针对此问题提出一种新的地震灾情遥感信息危险等级在线应急评定方法。利用图像几何校正法,对遥感图像进行分幅裁剪,基于裁剪结果选取地面控制点,提取有价值遥感数据信息,建立遥感解译评估指标。将推导出的综合震灾指数引入到指标中,将各个评价单元的信息进行等级排序和划分,完成地震灾情遥感信息危险等级在线应急评定。仿真实验中,对所提方法和GIS地震危险等级评定方法进行有效性对比测试。实验结果表明,地震灾情遥感信息危险等级在线应急评定方法提升了灾情地形控制点选取的合理性,使获取的遥感图像更清晰,灾情等级评定结果更精准。  相似文献   

14.
The sampling theorem in two dimensions univocally defines a surface, provided that its values are known at points disposed on a regular lattice. If the data are irregularly spaced, the usual procedure is first to interpolate the surface on a regular grid and then to contour the interpolated data: however, the resulting surface will not necessarily assume the prescribed values on the irregular grid. One way to obtain this result is to introduce a transformation of the coordinates such that all the original data points are transferred into part of the nodes of a regular grid. The surface is then interpolated in the points correspondent to the other crosspoints of the regular grid; the contour lines are determined in the transformed plane and then, using the inverse coordinate transformation, are transferred back to the original plane where they will certainly be congruent with the original data points. Nonetheless, the resulting surface is very sensitive to the interpolation method used: two algorithms for that are analyzed. The first (harmonization) corresponds to the determination of the potential of an electrical field whose contour conditions are those defined by the data points. The second method consists in two dimensional statistical estimation (krigeing); in particular, the effects of different choices for the data auto-covariance function are discussed. The solutions are compared and some practical results are shown.  相似文献   

15.
Abstract

A method is introduced for probabilistic forecasting of hydrological events based on geostatistical analysis. In this method, the predictors of a hydrological variable define a virtual field such that, in this field, the observed dependent variables are considered as measurement points. Variography of the measurement points enables the use of the system of kriging equations to estimate the value of the variable at non-measured locations of the field. Non-measured points are the forecasts associated with specific predictors. Calculation of the estimation variance facilitates probabilistic analysis of the forecast variables. The method is applied to case studies of the Red River in Manitoba, Canada and Karoon River in Khoozestan, Iran. The study analyses the advantages and limitations of the proposed method in comparison with a K-nearest neighbour approach and linear and nonlinear multiple regression. The utility of the proposed method for forecasting hydrological variables with a conditional probability distribution is demonstrated.  相似文献   

16.
The performance of a coupled Finite Element—Analytic method in solving elastic wave scattering in infinite spaces is studied for plane SH-waves. The influence of several parameters on the accuracy of the results is investigated. These parameters are the number of terms in the series solution, the number of compatibility points across an imaginary circular interface (i.e. the points for which the continuity of both stresses and displacements are enforced), and the ratio of element dimension to wavelength in the direction of propagation. It was found that the method converges rapidly with the number of terms. Furthermore, both element dimension to wavelength ratio and the number of compatibility points significantly influence the accuracy of the approximate solution.  相似文献   

17.
矢量波场弹性波Kirchhoff偏移   总被引:2,自引:0,他引:2  
Based on Kuo and Dai's vectorial wave-field extrapolation equations, we derive new Kirchhoff migration equations by introducing unit vectors which represent the ray directions at the imaging points of the reflected P- and PS converted-waves. Furthermore, using the slope of the events on shot records and a ray racing procedure, mirror-image reflection points are found and the reflection data are smeared along the Fresnel zone. The migration method proposed in this paper solves two troublesome imaging problems caused by limited receiving aperture and migration artifacts resulting from wave propagation at the velocities of non original wave type. The migration method is applied successfully with model data, demonstrating that the new method is effective and correct.  相似文献   

18.
The seismic velocity of sedimentary rocks is determined by the porosity, the velocity in the matrix and that in the fluid. The last two are known experimentally. The velocity can be measured from the surface. By applying the time average equation we can find the porosity. If the only difference at two points is the nature of the fluid in one layer, the ratio of the reflectivities of the layer at these points determines the nature of the fluid; this ratio is equal to the ratio of the amplitudes at these points. The size of the reservoir can then be found. The method can be applied to both oil exploration and production. It is more accurate in the latter case because more information is available than in the former case. The method is also more effective in developing discovered fields than the conventional method of relying only on the geological structural configurations.  相似文献   

19.
反插值法实现地球物理数据快速网格化   总被引:2,自引:3,他引:2       下载免费PDF全文
本文借鉴反演理论,采用反插值法实现地球物理数据的快速网格化.首先由已知点与未知网格点的反距离拓扑关系建立反演方程,用已知点值直接计算出其所在网格的未知网格点值,再利用Laplacian算子滤波,使得模型光滑,且能量最小化.利用预条件共轭梯度法求解网格化方程组,并结合螺旋坐标系思想和Wilson\|Burg谱分解法,将二维数据的滤波处理转换到一维空间进行处理,实现二维数据快速滤波.另外,引入了阻尼约束,保证求解稳定、迭代收敛.最后,应用该方法对合成数据和实际资料进行了试验.  相似文献   

20.
本文运用Maslov渐近理论编写的二维横向非均匀介质中的理论地震图程序,与其它类型算法作了精确对比,结果表明,在层状介质模型中,本程序的结果无论振幅还是波形对比都与反射率法基本相同。对于二维横向非均匀模型,在射线理论的非奇点处,本算法与射线方法基本一致,在射线理论的奇异点处,Maslov方法消除了射线理论所固有奇点,提高了计算精度。  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号