共查询到20条相似文献，搜索用时 156 毫秒
1.
Rock physics modeling of heterogeneous carbonatereservoirs： porosity estimation and hydrocarbon detection 总被引：1，自引：1，他引：0
Hao Yu Jing Ba Jose Carcione Jin-Song Li Gang Tang Xing-Yang Zhang Xin-Zhen He Hua Ouyang 《应用地球物理》2014,11(1):9-22
In heterogeneous natural gas reservoirs, gas is generally present as small patch-like pockets embedded in the water-saturated host matrix. This type of heterogeneity, alsocalled ＂patchy saturation＂, causes significant seismic velocity dispersion and attenuation. Toestablish the relation between seismic response and type of fluids, we designed a rock physicsmodel for carbonates. First, we performed CT scanning and analysis of the fluid distributionin the partially saturated rocks. Then, we predicted the quantitative relation between the waveresponse at different frequency ranges and the basic lithological properties and pore fluids.A rock physics template was constructed based on thin section analysis of pore structuresand seismic inversion. This approach was applied to the limestone gas reservoirs of the rightbank block of the Amu Darya River. Based on poststack wave impedance and prestack elasticparameter inversions, the seismic data were used to estimate rock porosity and gas saturation.The model results were in ~ood a~reement with the production regime of the wells. 相似文献
2.
In this paper,according to the relationship of observation spectrum with source spectrum,travel-path attenuationfactor and site effect,we use the digital seismic data of moderate-small earthquakes to invert the soft rock site ef-fect and S wave inelastic attenuation under the constraint of site effect,and determine the parameters of path andsite.The parameters obtained by this method exclude the topographic effect of seismic stations,and truly reflectthe seismic effect of free soft rock sites and the S wave inelastic attenuation in the studied region.The average softrock site effect is about 1.5 times in the frequency domain of 2～4 Hz and the S wave quality factor is obtained asQS=278 f0.346,which can be directly applied to the stochastic modeling of ground motions in the studied region. 相似文献
3.
Seismic Signatures of Rock Pore Structure 总被引：1，自引：0，他引：1
Yue-FengSun 《应用地球物理》2004,1(1):42-49
Rock pore structure is one of the important parameters in controlling both seismic wave velocity and permeability in sandstones and carbonate rocks. For a given porosity of two similar rocks with different pore structures, their acoustic wave speeds can differ 2 km/s, and permeability can span nearly six orders of magnitude from 0.01 mD to 20 D in both sandstone and limestone. In this paper, we summarize a two-parameter elastic velocity model reduced from a general poroelastic theory, to characterize the effect of pore structures on seismic wave propagation. For a given mineralogy and fluid type of a reservoir, this velocity model is defined by porosity and a frame flexibility factor, which can be used in seismic inversion and reservoir characterization to improve estimation of porosity and reserves. The frame flexibility factor can be used for quantitative classification of rock pore structure types (PST) and may be related to pore connectivity and permeability, using both poststack and prestack seismic data. This study also helps explain why amplitude versus offset analysis (AVO) in some cases fails for the purpose of fluid detection: pore structure effect on seismic waves can mask all the fluid effects, especially in carbonate rocks. 相似文献
4.
Understanding the effects of in situ fluid content and fracture parameters on seismic characteristics is important for the subsurface exploration and production of fractured porous rocks. The ratio of normal-to-shear fracture compliance is typically utilized as a fluid indicator to evaluate anisotropy and identify fluids filling the fractures, but it represents an underdetermined problem because this fluid indicator varies as a function of both fracture geometry and fluid content. On the bases of anisotropic Gassmann's equation and linear-slip model, we suggest an anisotropic poroelasticity model for fractured porous reservoirs. By combining a perturbed stiffness matrix and asymptotic ray theory, we then construct a direct relationship between the PP-wave reflection coefficients and characteristic parameters of fluids(P-and S-wave moduli) and fractures(fracture quasi-weaknesses), thereby decoupling the effects of fluid and fracture properties on seismic reflection characterization.By incorporating fracture quasi-weakness parameters, we propose a novel parameterization method for elastic impedance variation with offset and azimuth(EIVOA). By incorporating wide-azimuth observable seismic reflection data with regularization constraints, we utilize Bayesian seismic inversion to estimate the fluid content and fracture parameters of fractured porous rocks. Tests on synthetic and real data demonstrate that fluid and fracture properties can be reasonably estimated directly from azimuthal seismic data and the proposed approach provides a reliable method for fluid identification and fracture characterization in a gas-saturated fractured porous reservoir. 相似文献
5.
IntroductionSeismic wave is an important information source to analyze and study seismic source and internal structure of the earth. Studies of wave on different frequency ranges can provide many features of seismic source and internal structure of the earth. In recent years in quantitative study of seismic wave seismologists at home and abroad have developed a wide study field on the coda. Especially seismologists have done a lot of work in coda geneses, mechanism and its attenuation to explo… 相似文献
6.
双相介质中地震波衰减的物理机制 总被引：1，自引：0，他引：1
High-frequency seismic attenuation is conventionally attributed to anelastic absorption. In this paper, I present three studies on high-frequency seismic attenuation and propose that the physical mechanism results from the interference of elastic microscopic multiple scattering waves. First, I propose a new theory on wave propagation in a two-phase medium which is based on the concept that the basic unit for wave propagation is a nano- mass point. As a result of the elasticity variations of pore fluid and rock framework, micro multiple scattering waves would emerge at the wavelength of the seismic waves passing through the two-phase medium and their interference and overlap would generate high- frequency seismic attenuation. Second, I present a study of the frequency response of seismic transmitted waves by modeling thin-layers with thicknesses no larger than pore diameters. Results indicate that high-frequency seismic waves attenuate slightly in a near-surface water zone but decay significantly in a near-surface gas zone. Third, I analyze the seismic attenuation characteristics in near-surface water and gas zones using dual-well shots in the Songliao Basin, and demonstrate that the high-frequency seismic waves attenuate slightly in water zones but in gas zones the 160-1600 Hz propagating waves decay significantly. The seismic attenuation characteristics from field observations coincide with the modeling results. Conclusions drawn from these studies theoretically support seismic attenuation recovery. 相似文献
7.
Hydraulic fracturing reservoir reconstruction technology is crucial in the development of shale gas exploitation techniques.Large quantities of high-pressure fluids injected into shale reservoirs significantly alter compressional(P)and shear(S)wave velocities,rock mechanical parameters,and anisotropic characteristics.In this study,differentiated hydraulic fracturing petrophysical experiments were carried out on Longmaxi Formation shale under pseudo-triaxial stress loading conditions.The effects of stress loading methods,and water-rock physical and chemical reactions on P-and S-wave velocities and rock mechanical parameters were compared.The experimental results showed that isotropic stress loading may increase the P-and Swave velocities and Young’s modulus of dry shale kldnsample.Furthermore,it may lead to a weakening of the corresponding anisotropy.In contrast,differential stress loading was able to improve the anisotropy of Young’s modulus and accelerate the decrease in the compressive strength of shale in the vertical bedding direction.The water-rock physical and chemical reactions prompted by hydraulic fracturing was found to"soften"shale samples and reduce Young’s modulus.The influence of this"soften"effect on the compressional and shear wave velocities of shale was negligible,whilst there was a significant decrease in the anisotropy characteristics of Thomsen parameters,Young’s modulus,and Poisson’s ratio.The negative linear relationship between the Poisson’s ratios of the shale samples was also observed to lose sensitivity to stress loading,as a result of the"soften"effect of fracturing fluid on shale.The results of this study provide a reliable reference point and data support for future research on the mechanical properties of Longmaxi shale rocks. 相似文献
8.
Energy loss in porous media containing fluids is typically caused by a variety of dynamic mechanisms.In the Biot theory,energy loss only includes the frictional dissipation between the solid phase and the fluid phase,resulting in underestimation of the dispersion and attenuation of the waves in the low frequency range.To develop a dynamic model that can predict the high dispersion and strong attenuation of waves at the seismic band,we introduce viscoelasticity into the Biot model and use fractional derivatives to describe the viscoelastic mechanism,and finally propose a new wave propagation model.Unlike the Biot model,the proposed model includes the intrinsic dissipation of the solid frame.We investigate the effects of the fractional order parameters on the dispersion and attenuation of the P-and S-waves using several numerical experiments.Furthermore,we use several groups of experimental data from different fluid-saturated rocks to testify the validity of the new model.The results demonstrate that the new model provides more accurate predictions of high dispersion and strong attenuation of different waves in the low frequency range. 相似文献
9.
Research on seismic fluid identification driven by rock physics 总被引：8，自引：0，他引：8
Seismic fluid identification works as an effective approach to characterize the fluid feature and distribution of the reservoir underground with seismic data. Rock physics which builds bridge between the elastic parameters and reservoir parameters sets the foundation of seismic fluid identification, which is also a hot topic on the study of quantitative characterization of oil/gas reservoirs. Study on seismic fluid identification driven by rock physics has proved to be rewarding in recognizing the fluid feature and distributed regularity of the oil/gas reservoirs. This paper summarizes the key scientific problems immersed in seismic fluid identification, and emphatically reviews the main progress of seismic fluid identification driven by rock physics domestic and overseas, as well as discusses the opportunities, challenges and future research direction related to seismic fluid identification. Theoretical study and practical application indicate that we should incorporate rock physics, numerical simulation, seismic data processing and seismic inversion together to enhance the precision of seismic fluid identification. 相似文献
10.
Based on spectral ratio method, a joint inversion method was used to obtain parameters of Lg wave attenuation and site response. The inversion method allows simple and direct (two-parameter) determination of Lg wave attenua- tion and site response from sparse spectral data, which are not affected by radiation pattern factor and different response of same instrument after geometrical spreading. The method was used successfully for estimating site re- sponse of stations of Zhejiang Seismic Network and measuring Lg wave attenuation. The study is based on 20 earth- quakes occurred in northeast of Taiwan with magnitude MS5.0~6.7 and 960 seismic wave records from 16 stations in Zhejiang area from 2002 to 2005. The parameters of site response and Lg attenuation were calculated with a fre- quency interval of 0.2 Hz in the range of 0.5 Hz to 10 Hz. Lg wave attenuation coefficient corresponding to U-D, E-W and N-S components are γ ( f )=0.00175 f 0.43485, γ ( f )=0.00145f 0.48467 and γ ( f )=0.0021f 0.41241, respectively. It is found that the site response is component-independent. It is also found that the site response of QIY station is significant above the frequency of 1.5 Hz, and that the site response of NIB station is low for most frequency 相似文献
11.
理论、观测和实验均证实,在地壳和上地幔存在对应力变化敏感的直立裂隙,在整体上呈现方位各向异性.在Hudson裂隙理论基础上,系统全面地数值模拟了裂隙介质几何、物性和弹性波频率等参数对各向异性衰减的影响.结果显示,裂隙密度、裂隙纵横比、泊松比、裂缝填充物、弹性波频率和未破裂岩石母体纵横波速度等对各向异性衰减有着显著影响,... 相似文献
12.
Partially saturated reservoirs are one of the major sources of seismic wave attenuation, modulus defect and velocity dispersion in real seismic data. The main attenuation and dispersion phenomenon is wave induced fluid flow due to the heterogeneity in pore fluids or porous rock. The identification of pore fluid type, saturation and distribution pattern within the pore space is of great significance as several seismic and petrophysical properties of porous rocks are largely affected by fluid type, saturation and fluid distribution pattern. Based on Gassmann-Wood and Gassmann- Hill rock physics models modulus defect, velocity dispersion and attenuation in Jurassic siliclastic partially-saturated rocks are studied. For this purpose two saturation patterns - uniform and patchy - are considered within the pore spaces in two frequency regimes i.e., lower frequency and higher frequency. The results reveal that at low enough frequency where saturation of liquid and gas is uniform, the seismic velocity and bulk modulus are lower than at higher frequency where saturation of fluid mixture is in the form of patches. The velocity dispersion and attenuation is also modeled at different levels of gas saturation. It is found that the maximum attenuation and velocity dispersion is at low gas saturation. Therefore, the dispersion and attenuation can provide a potential way to predict gas saturation and can be used as a property to differentiate low from high gas saturation. 相似文献
13.
地下多孔介质中的孔隙类型复杂多样,既有硬孔又有扁平的软孔.针对复杂孔隙介质,假设多孔介质中同时含有球型硬孔和两种不同产状的裂隙(硬币型、尖灭型裂隙),当孔隙介质承载载荷时,考虑两种不同类型的裂隙对于孔隙流体压力的影响,建立起Biot理论框架下饱和流体情况含混合裂隙、孔隙介质的弹性波动方程,并进一步求取了饱和流体情况下仅由裂隙引起流体流动时的含混合裂隙、孔隙介质的体积模量和剪切模量,随后,在此基础上讨论了含混合裂隙、孔隙介质在封闭条件下地震波衰减和频散的高低频极限表达式.最后计算了给定模型的地震波衰减和频散,发现地震波衰减曲线呈现"多峰"现象,速度曲线为"多频段"频散.针对该模型分析讨论了渗透率参数、裂隙纵横比参数以及流体黏滞性参数对于地震波衰减和频散的影响,表明三个参数均为频率控制参数. 相似文献
14.
储层砂岩微观孔隙结构特征不仅影响干燥岩石的弹性波传播速度,也决定了岩石介质中与流体流动相关的速度频散与衰减作用.依据储层砂岩微观结构特征及速度随有效压力变化的非线性特征,将其孔隙体系理想化为不同形状的硬孔隙(纵横比α0.01)与软孔隙(纵横比α0.01)的组合(双孔隙结构).基于孔弹性理论,给出软孔隙最小初始纵横比值(一定压力下所有未闭合软孔隙在零压力时的纵横比最小值)的解析表达式,并在此基础上利用岩石速度-压力实验观测结果给出求取介质中两类孔隙纵横比及其含量分布特征的方法.通过逐步迭代加入软孔隙的方法对基于特征纵横比的"喷射流"(squirt fluid)模型进行了扩展,以考虑复杂孔隙分布特征对岩石喷射流作用的影响及其可能引起的速度频散特征.相较于典型的喷射流作用速度频散模式,对于岩石中软孔隙纵横比及其对应含量在较宽的范围呈谱分布的一般情况,其速度频散曲线不存在明显的低频段和中间频段,速度随频率的增大呈递增趋势直至高频极限.这说明即使在地震频段,微观尺度下的喷射流作用仍起一定作用,同样会造成流体饱和岩石介质的地震速度与Gassmann方程预测结果有不可忽略的差异.本文是对现有喷射流模型的重要补充,也为利用实验数据建立不同频段间岩石弹性波传播速度的可能联系提供了理论依据. 相似文献
15.
地震波在含孔隙、裂隙斑块饱和介质传播过程中会诱发多个尺度孔隙流体流动而产生衰减和速度频散.在含有宏观尺度“Biot流”和介观尺度“局域流”衰减诱导机制的周期性层状孔隙介质模型基础上,引入了微观尺度硬币型和尖灭型裂隙“喷射流”的影响,构建了周期性层状含孔隙、裂隙介质模型.利用双解耦弹性波动方程的方法数值计算了该模型地震频带的纵波衰减和速度频散并与周期性层状孔隙介质模型做了对比研究.分析了该模型在不同裂隙参数（裂隙密度、裂隙纵横比）及裂隙体积含量下的纵波衰减和频散特征,裂隙密度越高对于纵波衰减和频散的影响越大,裂隙纵横比越小,由裂隙引起的纵波衰减部分向高频段移动,裂隙体积含量越少,纵波衰减先降低后小幅增加再降低,频散速度增加,并逐渐接近于周期性层状孔隙介质模型的纵波衰减和频散速度曲线.最后研究了周期性层状含孔隙、裂隙介质模型有效平面波模量的高低频极限以及流固相对位移在该模型中的分布特征. 相似文献
16.
地质成因和构造/热应力导致地壳岩石中的孔隙结构（裂隙和粒间孔）的变化.影响岩石黏弹性的因素包括压力、孔隙度、孔隙中包含的流体和孔隙几何形状等.相对于岩石中的硬孔隙,岩石黏弹性（衰减和频散）受软孔隙（裂隙）的影响更大.本文选取三块白云岩样本,进行了不同围压和流体条件下的超声波实验测量.利用CPEM（Cracks and Pores Effective Medium,裂隙和孔隙有效介质）模型获得了岩石高、低频极限的弹性模量,并通过Zener体（标准线性体）模型将CPEM模型拓展到全频带而得到CPEM-Zener模型,用该模型拟合岩石松弛和非松弛状态下的实验数据,本文得到平均裂隙纵横比和裂隙孔隙度以及纵波速度和品质因子随频率的变化关系.结果表明,饱水岩石的平均裂隙纵横比和裂隙孔隙度均高于饱油岩石,随着压差（围压和孔隙压力的差值）的增加,饱油岩石中的裂隙首先闭合.并且压差在70 MPa以内时,随着压差增大,岩石的平均裂隙纵横比和裂隙孔隙度在饱水和饱油时的差值增大,此时流体类型对于岩石裂隙的影响越来越显著,此外,对饱水岩石,平均裂隙纵横比随压差增加而增大,这可能是由于岩石中纵横比较小的裂隙会随压差增大而逐渐趋于闭合.在饱水和饱油岩石中,裂隙孔隙度和裂隙密度都随着压差增加而减小.通过对裂隙密度和压差的关系进行指数拟合,本文获得压差趋于0时的裂隙密度,且裂隙密度随孔隙度增大而增大,增大速率随压差增加而降低.针对饱水和饱油的白云岩样本,CPEM-Zener模型预测的纵波频散随压差增大而减小,此变化趋势和实验测得的逆品质因子随压差的变化关系基本一致,由此进一步验证了模型的实用性.本研究对岩石的孔隙结构和黏弹性分析以及声波测井、地震勘探的现场应用有指导意义. 相似文献
17.
碳酸盐岩孔隙结构类型复杂多样,当地震波经过含有不同孔隙结构的流体饱和岩石后往往会产生不同的波频散和衰减特征,这使得根据波的不同响应特征来推断碳酸盐岩的孔隙结构类型,甚至孔隙流体性质信息成为可能.本文针对白云岩、灰岩以及人工碳酸盐岩样品开展了跨频段（超声+低频）实验测量和理论建模,探索碳酸盐岩的孔隙结构类型和孔隙流体对模量频散和衰减的影响机制.首先根据铸体薄片、扫描电镜的图像对碳酸盐岩样品进行了孔隙结构类型分析,并将样品主要分为裂缝型、裂缝-孔隙型、孔洞型三类,然后测量了相应样品完全饱和流体后在不同围压下的模量频散与衰减.在完全饱和甘油并处于低围压时,裂缝型与孔洞型样品均出现一个衰减峰,分别位于1 Hz与100 Hz附近,而裂缝-孔隙型样品则具有两个衰减峰,一个在1 Hz附近,另一个在100 Hz附近.裂缝型样品（裂缝主导）的衰减峰相比孔洞型样品（中等刚度孔隙主导）对应的衰减峰在低围压下幅度更大,且对围压变化更敏感.在测量数据的基础上,建立了考虑纵横比分布的软孔隙和中等刚度孔隙的喷射流模型,认为该模型能一定程度上解释裂缝型、裂缝-孔隙型、孔洞型三种类型碳酸盐岩在测量频带的频散.以上研究加深了对不同孔隙类型主导的碳酸盐岩储层地震响应特征的认识,对储层预测工作的进一步精细化具有重要意义. 相似文献
18.
在油、气储层的勘探和开发中观察到的一个现象是储层岩石中普遍存在孔隙和裂隙.随着近年来孔、裂隙介质弹性波动理论的进展,我们可以将此理论应用于测井技术,以此来指导从声波测井中测量孔、裂隙地层的声学参数.本文计算了孔、裂隙地层里充流体井眼中的多极子声场,分析了声场随裂隙介质的两个主要参数(即裂隙密度和裂隙纵横比)的变化特征.井孔声场的数值计算表明裂隙密度可以大幅度地降低井中声波纵、横波的波速和振幅.随着裂隙密度的增加,在测井频段内也可以看到纵、横波速的频散现象(这种频散在孔隙地层中一般是观察不到的).本文还研究了多极子模式波 (即单极的Stoneley波、伪瑞利波以及偶极的弯曲波)随裂隙参数的变化特征.结果表明,这些模式波的振幅激发和速度频散都受裂隙密度的影响.裂隙密度越高影响越大.此外,裂隙还对模式波的传播造成较大的衰减.相对裂隙密度而言,裂隙纵横比是一个频率控制参数,它控制裂隙对声场影响的频率区间.本文的分析结果对裂缝、孔隙型地层的声波测井具有指导意义. 相似文献
19.
利用新方法制作出含可控裂缝的双孔隙人工砂岩物理模型,具有与天然岩石更为接近的矿物成分、孔隙结构和胶结方式,其中裂缝密度、裂缝尺寸和裂缝张开度等裂缝参数可以控制以得到实验所需要的裂缝参数,岩样具有真实的孔隙和裂缝空间并可以在不同饱和流体状态下研究流体性质对于裂缝介质性质的影响.本次实验制作出一组具有不同裂缝密度的含裂缝人工岩样,对岩样利用SEM扫描电镜分析可以看到真实的孔隙结构和符合我们要求的裂缝参数,岩样被加工成八面棱柱以测量不同方向上弹性波传播的速度,用0.5 MHz的换能器使用透射法测量在饱和空气和饱和水条件下各个样品不同方向上的纵横波速度,并得出纵横波速度、横波分裂系数和纵横波各向异性强度受裂缝密度和饱和流体的影响.研究发现流体对于纵波速度和纵波各向异性强度的影响较强,而横波速度、横波分裂系数和横波各向异性强度受饱和流体的影响不大,但是对裂缝密度的变化更敏感. 相似文献
20.
Qazi Adnan Ahmad Guochen Wu Zong Zhaoyun Wu Jianlu Li Kun Du Tianwei Nasir Khan 《Geophysical Prospecting》2020,68(2):657-677
In exploration geophysics, the efforts to extract subsurface information from wave characteristics exceedingly depend on the construction of suitable rock physics model. Analysis of different rock physics models reveals that the strength and magnitude of attenuation and dispersion of propagating wave exceedingly depend on wave-induced fluid flow at multiple scales. In current work, a comprehensive analysis of wave attenuation and velocity dispersion is carried out at broad frequency range. Our methodology is based on Biot's poroelastic relations, by which variations in wave characteristics associated with wave-induced fluid flow due to the coexistence of three fluid phases in the pore volume is estimated. In contrast to the results of previous research, our results indicate the occurrence of two-time pore pressure relaxation phenomenon at the interface between fluids of disparate nature, that is, different bulk modulus, viscosity and density. Also, the obtained results are compatible with numerical results for the same 1D model which are accounted using Biot's poroelastic and quasi-static equation in frequency domain. Moreover, the effects of change in saturation of three-phase fluids were also computed which is the key task for geophysicist. The outcomes of our research reveal that pore pressure relaxation phenomenon significantly depends on the saturation of distinct fluids and the order of saturating fluids. It is also concluded that the change in the saturation of three-phase fluid significantly influences the characteristics of the seismic wave. The analysis of obtained results indicates that our proposed approach is a useful tool for quantification, identification and discrimination of different fluid phases. Moreover, our proposed approach improves the accuracy to predict dispersive behaviour of propagating wave at sub-seismic and seismic frequencies. 相似文献