共查询到20条相似文献，搜索用时 31 毫秒
1.
基于CAP方法, 使用地震波形资料, 计算得到了2009年1月~2017年8月期间南北地震带及周边区域466个3.5级以上地震震源机制解。 在补充收集1976年1月~2017年8月GCMT公布的259个4.5级以上地震震源机制解的基础上, 分析了南北地震带地震震源机制解和应力特征。 震源机制空间分布显示, 不同断裂带、 块体间表现出不同的震源机制空间分布特征, 该特征与南北地震带不同段落活动构造性质基本吻合。 作为青藏高原东边界的南北地震带, 由于动力环境复杂, 其内部P轴方向具有明显的差异性。 这种差异主要表现为: 南北地震带北段P轴呈NE向分布; 龙门山断裂带及周边除NE段P轴取向为NW—NNW向外, 其他地段P轴近EW向; 川滇菱形块体内部P轴呈NNW向, 而其西边界以西呈NNE向, 东边界以东呈NW向, 应力方向转换带的与川滇菱形块体边界基本一致。 整体而言, 南北地震带及近邻P轴方向由北到南发生了顺时针转动。 相似文献
2.
南北地震带区域构造应力场反演 总被引：1，自引：0，他引：1
利用区域应力张量阻尼方法，使用南北地震带及其邻近区域2009年1月—2017年8月466次ML≥3.5地震的震源机制解，及1976年1月—2017年8月GCMT公布的259次M≥4.5地震的震源机制解，反演得到研究区1.0°×1.0°网格大小区域的构造应力场。应力场空间分布特征显示，南北地震带作为青藏高原的东边界，由于所处动力环境复杂，其内部最大主应力方向具有明显的空间差异性。这种差异主要表现为:南北地震带北段最大主应力方向为NE向；南北地震带中段及周边除龙门山断裂带NE段最大主应力为NW-NNW向外，其它地段最大主应力近EW向；南北地震带中南段最大主应力方向逐渐由近EW向到NW或NE向，再到近NS向。整体而言，南北地震带及邻近区域最大主应力方向由北到南发生了顺时针旋转。川滇菱形块体内部最大主应力方向为NNW向，应力方向转换带与块体边界基本一致，其东边界以东最大主应力方向为NW向，西边界以西为NNE向。从区域构造应力场的角度分析，难以将“南北地震带”作为一个统一的地震带应用于中长期地震预测的研究与实践中。 相似文献
3.
南北地震带作为中国大陆地应力场一级分区的边界,其构造应力场的研究对理解大陆强震机理、构造变形和地震应力的相互作用具有重要意义.本文收集南北地震带1970—2014年的震源机制解819条,按照全球应力图的分类标准对震源机制解进行分类,发现其空间分布特征与地质构造活动性质比较吻合.P轴水平投影指示了活动块体的运动方向,T轴水平投影在川滇块体及邻近地区空间差异特征最为突出,存在顺时针旋转的趋势.南北地震带的最大水平主应力方向具有明显的分区特征,北段为NE向走滑类型的应力状态,中段为NEE—EW—NWW向的逆冲类型,南段为SE—SSE—NS—NNE向走滑和正断类型,在川滇块体的北部和西边界应力状态为EW—SE—SSE的正断层类型,表明来自印度板块的NNE或NE向的水平挤压应力和青藏高原物质东向滑移沿大型走滑断裂带向SE向平移的复合作用控制了南北地震带的岩石圈应力场.川滇块体西边界正断层类型应力状态范围与高分辨率地震学观测得到的中下地壳低速带范围基本吻合,青藏高原向东扩张的塑性物质流与横向边界(丽江—小金河断裂带)的弱化易于应变能的释放,在局部地区使NS向拉张的正断层向EW向拉张正断层转变.反演得到的应力状态基本上与各种类型地震的破裂方式比较吻合,也进一步验证反演结果的可靠性,可为地球动力学过程的模拟和活动断层滑动性质的厘定提供参考. 相似文献
4.
Sounding and study on electrical structure of the crust and upper mantle within the eastern border region of Qinghai-Tibet Plateau by using the magnetotelluric sounding (simply MT) method permitted us to understand the characteristics of specific electrical structure in the region. The sounding result clearly revealed that: (1) The Xianshuihe fault zone represents a large-scale lithospheric fault and is an important boundary fault of the rhombic Sichuan-Yunnan block. (2) The sounded region is a strong earthquake-prone zone. The different crustal media of blocks on both sides of the fault became an important deep background for the strong seismo-active zone. (3) A large-scale low-resistivity layer is found to exist at a depth more than ten kilometers beneath the northern part of the rhombic Sichuan-Yunnan block. Its electrical resistivity is only several to tens Ω · m. The layer northeastward extends down at an angle of 45°. It is related to an obstacle to the lateral squeeze of Qinghai-Tibet Plateau and eastward flow of mass by the rigid block. It is inferred from the characteristics of electrical property of deep media that the northern part of the recent rhombic Sichuan-Yunnan block is in a thermal state and is one of the recently fairly active blocks. (4) The lithosphere in the sounded region is gradually thickened from the western segment (northern Sichuan-Yunnan block) to east (Yangtze block). 相似文献
5.
COULOMB STRESS EVOLUTION AND SEISMIC HAZARD ALONG THE EASTERN BOUNDARY OF THE SICHUAN-YUNNAN BLOCK 
下载免费PDF全文
下载免费PDF全文 Using a more realistic model of multi-layered viscoelastic media, and considering the effects of the coseismic dislocation and the postseismic viscoelastic relaxation caused by the 34 great earthquakes occurring along the eastern boundary of the Sichuan-Yunnan block since 1480 and the interseismic stress accumulation caused by the tectonic loading generated by plate motions which were modeled by introducing "virtual negative displacements" along the major fault segment in the region under study, we calculated the evolution of the Coulomb stress change in each fault plane of 18 major fault segments along the eastern boundary caused by the coseismic, postseismic and interseismic effects. We studied the interactions of the Xianshuihe, Anninghe, Zemuhe and Xiaojiang fault zones on the eastern boundary of the Sichuan-Yunnan block. By evaluating if the previous earthquake could bring another earthquake closer to or farther from failure, we analyzed the interactions of the earthquakes which occurred in the different segments in the same fault zone, or in the different fault zones respectively. And further based on the calculation results of the Coulomb stress change on the fault planes, we analyzed the seismic hazard of each fault segment.The results show that the previous earthquake may trigger another earthquake which can occur in the same fault zone or in the different fault zone. And the calculation results on the evolution of the cumulative Coulomb stress change in the each fault segment show that, the Coulomb stress increases significantly in the middle section and the Moxi segment of the Xianshuihe fault zone, the Mianning-Xichang segment of the Anninghe fault zone, the Qiaojia-dongchuan segment and the Jianshui segment of the Xiaojiang fault zone, and the seismic hazard in these fault segments is worthy paying attention to. 相似文献
6.
Sounding of electrical structure of the crust and upper mantle along the eastern border of Qinghai-Tibet Plateau and its tectonic significance 总被引：2，自引：0，他引：2
Sounding and study on electrical structure of the crust and upper mantle within the eastern border region of Qinghai-Tibet Plateau by using the magnetotelluric sounding (simply MT) method permitted us to understand the characteristics of specific electrical structure in the region. The sounding result clearly revealed that: (1) The Xianshuihe fault zone represents a large-scale lithospheric fault and is an important boundary fault of the rhombic Sichuan-Yunnan block. (2) The sounded region is a strong earthquake-prone zone. The different crustal media of blocks on both sides of the fault became an important deep background for the strong seismo-active zone. (3) A large-scale low-resistivity layer is found to exist at a depth more than ten kilometers beneath the northern part of the rhombic Sichuan-Yunnan block. Its electrical resistivity is only several to tens Ω?m. The layer northeastward extends down at an angle of 45°. It is related to an obstacle to the lateral squeeze of Qinghai-Tibet Plateau and eastward flow of mass by the rigid block. It is inferred from the characteristics of electrical property of deep media that the northern part of the recent rhombic Sichuan-Yunnan block is in a thermal state and is one of the recently fairly active blocks. (4) The lithosphere in the sounded region is gradually thickened from the western segment (northern Sichuan-Yunnan block) to east (Yangtze block). 相似文献
7.
QI Yu-ping ZHANG Zhi-wei LONG Feng XIAO Ben-fu LIANG Ming-jian LU Qian JIANG Peng 《地震地质》2018,40(2):377-395
The Daliangshan sub-block is a boundary region among the Bayan Har block, the Sichuan-Yunnan block and the South China block. It hosts four major fault systems:The southwest to south trending Xianshuihe-Zemuhe Fault zone in the west, the Longmenshan fault zone is the northern boundary, the Zhaotong-Lianfeng fault zone in the south, and the NS-trending Mabian-Yanjin fault zone in the east. This study focused on focal mechanisms and the regional stress field of the Daliangshan sub-block to help understand the earthquake preparation process, tectonic deformation and seismic stress interaction in this area. We collected broadband waveform records from the Sichuan Seismic Network and used multiple 1-D velocity models to determine the focal mechanisms of moderate and large earthquakes(ML ≥ 3.5)in the Daliangshan sub-block by using the CAP method. Results for 276 earthquakes from Jan 2010 to Aug 2016 show that the earthquakes are dominated by strike-slip and trust faulting, very few events have normal faulting and the mixed type. We then derived the regional distribution of the stress field through a damp linear inversion(DRSSI)using the focal mechanisms obtained in this study. Inversion results for the spatial pattern of the stress field in the block suggest that the entire region is predominantly under strike-slip and trust faulting regimes, largely consistent with the focal mechanisms. The direction of maximum compression axes is NW-NWW, and part of the area is slightly rotated, which is consistent with the GPS velocity field. Combining geodynamic background, this work suggests that because the Sichuan-Yunnan block is moving to SE and the Tibetan plateau to SE-E along major strike-slip faults, the stress field of the Daliangshan sub-block and its adjacent regions is controlled jointly by the Bayan Har block, the Sichuan-Yunnan block and the South China block. 相似文献
8.
Introduction In the years when the reliable data could not be obtained and in the analysis of strain property and magnitude in history, the intensity, property and activity pattern of strain field were mainly inferred on the bases of geometric characters of surface traces and behaviors (especially the faults) as well as the characteristics of petrology (XIE, et al, 1993; Molnar, Tapponnier, 1975, 1977; Tapponnier, Molnar, 1977; FU, et al, 2000). However, they are the averaged results accumu… 相似文献
9.
CHARACTERISTICS OF FOCAL MECHANISMS AND STRESS FIELD IN THE EASTERN BOUNDARY OF SICHUAN-YUNNAN BLOCK AND ITS ADJACENT AREA 下载免费PDF全文
下载免费PDF全文 This study is devoted to a systematic analysis of the stress state of the eastern boundary area of Sichuan-Yunnan block based on focal mechanisms of 319 earthquakes with magnitudes between M3.0 and M6.9, occurring from January 2009 to May 2018. We firstly determined the mechanism solutions of 234 earthquakes by the CAP method, using the broadband waveforms recorded by Chinese regional permanent networks, and collected 85 centroid moment tensor solutions from the GCMT. Then we investigated the regional stress regime through a damp linear inversion. Our results show that:1)the focal mechanisms of moderate earthquakes are regionally specific with three principal types of focal mechanisms:the strike-slip faulting type, the thrust faulting type and the normal faulting type. The strike-slip faulting type is significant in the eastern boundary area of Sichuan-Yunnan block along the Xianshuihe-Xiaojiang Fault, the Daliangshan Fault, and the Zhaotong-Lianfeng Fault. The thrust faulting type and the combined thrust/strike-slip faulting type are significant along the Mabian-Yanjin Fault, Ebian-Yanfeng Fault and the eastern section of Lianfeng Fault; 2)The most robust feature of the regional stress regime is that, the azimuth of principal compressive stress axis rotates clockwise from NWW to NW along the eastern boundary of Sichuan-Yunnan Block, and the clockwise rotation angle is about 50 degrees. Meanwhile, the angels between the principal compressive axis and the trend of eastern boundary of Sichuan-Yunnan Block remain unchanged, which implies a stable coefficient of fault friction in the eastern boundary fault zone of Sichuan-Yunnan Block. The movement of the upper crust in the southeastern Tibetan plateau is a relatively rigid clockwise rotation. On the whole, the Xianshuihe-Xiaojiang Fault is a small arc on the earth, and its Euler pole axis is at(21°N, 88°E). The Daliangshan Fault is surrounded by the Anninghe-Zemuhe Fault, which formed a closed diamond shape. When the Sichuan-Yunnan block rotates clockwise, the Daliangshan Fault locates in the outer of the arc, while the Anninghe-Zemuhe Fault is in the inward of the arc, and from the mechanical point of view, left-lateral sliding movement is more likely to occur on the Daliangshan Fault. Our results can be the evidence for the study on the "cut-off" function of the Daliangshan Fault based on the stress field background; 3)The regional stress regime of the eastern boundary faults zone of the Sichuan-Yunnan Block is the same as the south section of the Dalianshan Fault, and the focal mechanism results also reveal that the Dalianshan Fault is keeping left-lateral strike-slip. There may be the same tectonic stress field that controls the earthquake activities in the southern section of Daliangshan Fault and Zhaotong-Lianfeng Fault. The regional stress regime of Zhaodong-Lianfeng Fault is also the same with the Sichuan-Yunnan Block, which implies that the control effect of the SE movement of the Sichuan-Yunnan block may extend to Weining. 相似文献
10.
Based on the first arrival P and S data of 4 625 regional earthquakes recorded at 174 stations dispersed in the Yunnan and
Sichuan Provinces, the 3-D velocity structure of crust and upper mantle in the region is determined, incorporating with previous
deep geophysical data. In the upper crust, a positive anomaly velocity zone exists in the Sichuan basin, whereas a negative
anomaly velocity zone exists in the western Sichuan plateau. The boundary between the positive and negative anomaly zones
is the Longmenshan fault zone. The images of lower crust and upper mantle in the Longmenshan fault, Xianshuihe fault, Honghe
fault and others show the characteristic of tectonic boundary, indicating that the faults likely penetrate the Moho discontinuity.
The negative velocity anomalies at the depth of 50 km in the Tengchong volcanic area and the Panxi tectonic zone appear to
be associated with the temperature and composition variations in the upper mantle. The overall features of the crustal and
the upper mantle structures in the Sichuan-Yunnan region are the lower average velocity in both crust and uppermost mantle,
the large crustal thickness variations, and the existence of high conductivity layer in the crust or/and upper mantle, and
higher geothermal value. All these features are closely related to the collision between the India and the Asia plates. The
crustal velocity in the Sichuan-Yunnan rhombic block generally shows normal value or positive anomaly, while the negative
anomaly exists in the area along the large strike-slip faults as the block boundary. It is conducive to the crustal block
side-pressing out along the faults. In the major seismic zones, the seismicity is relative to the negative anomaly velocity.
Most strong earthquakes occurred in the upper-mid crust with positive anomaly or normal velocity, where the negative anomaly
zone generally exists below.
Foundation item: National Scientific and Technological Development Program (95-973-02-02), the Climb Program (95-S-05-01) of National Scientific
and Technological Ministry of China, and the State Natural Sciences Foundation of China (49874021).
Contribution No. 02FE2004, Institute of Geophysics, China Seismological Bureau. 相似文献
11.
MIGRATION OF LARGE EARTHQUAKES IN TIBETAN BLOCK AREA AND DISSCUSSION ON MAJOR ACTIVE REGION IN THE FUTURE 下载免费PDF全文
下载免费PDF全文 YUAN Dao-yang FENG Jian-gang ZHENG Wen-jun LIU Xing-wang GE Wei-peng WANG Wei-tong 《地震地质》1979,42(2):297-315
On the basis of summarizing the circulation characteristics and mechanism of earthquakes with magnitude 7 or above in continental China, the spatial-temporal migration characteristics, mechanism and future development trend of earthquakes with magnitude above 7 in Tibetan block area are analyzed comprehensively. The results show that there are temporal clustering and spatial zoning of regional strong earthquakes and large earthquakes in continental China, and they show the characteristics of migration and circulation in time and space. In the past 100a, there are four major earthquake cluster areas that have migrated from west to east and from south to north, i.e. 1)Himalayan seismic belt and Tianshan-Baikal seismic belt; 2)Mid-north to north-south seismic belt in Tibetan block area; 3)North-south seismic belt-periphery of Assam cape; and 4)North China and Sichuan-Yunnan area. The cluster time of each area is about 20a, and a complete cycle time is about 80a. The temporal and spatial images of the migration and circulation of strong earthquakes are consistent with the motion velocity field images obtained through GPS observations in continental China. The mechanism is related to the latest tectonic activity in continental China, which is mainly affected by the continuous compression of the Indian plate to the north on the Eurasian plate, the rotation of the Tibetan plateau around the eastern Himalayan syntaxis, and the additional stress field caused by the change of the earth's rotation speed.
Since 1900AD, the Tibetan block area has experienced three periods of high tides of earthquake activity clusters(also known as earthquake series), among which the Haiyuan-Gulang earthquake series from 1920 to 1937 mainly occurred around the active block boundary structural belt on the periphery of the Tibetan block region, with the largest earthquake occurring on the large active fault zone in the northeastern boundary belt. The Chayu-Dangxiong earthquake series from 1947 to 1976 mainly occurred around the large-scale boundary active faults of Qiangtang block, Bayankala block and eastern Himalayan syntaxis within the Tibetan block area. In the 1995-present Kunlun-Wenchuan earthquake series, 8 earthquakes with MS7.0 or above have occurred on the boundary fault zones of the Bayankala block. Therefore, the Bayankala block has become the main area of large earthquake activity on the Tibetan plateau in the past 20a. The clustering characteristic of this kind of seismic activity shows that in a certain period of time, strong earthquake activity can occur on the boundary fault zone of the same block or closely related blocks driven by a unified dynamic mechanism, reflecting the overall movement characteristics of the block. The migration images of the main active areas of the three earthquake series reflect the current tectonic deformation process of the Tibetan block region, where the tectonic activity is gradually converging inward from the boundary tectonic belt around the block, and the compression uplift and extrusion to the south and east occurs in the plateau. This mechanism of gradual migration and repeated activities from the periphery to the middle can be explained by coupled block movement and continuous deformation model, which conforms to the dynamic model of the active tectonic block hypothesis.
A comprehensive analysis shows that the Kunlun-Wenchuan earthquake series, which has lasted for more than 20a, is likely to come to an end. In the next 20a, the main active area of the major earthquakes with magnitude 7 on the continental China may migrate to the peripheral boundary zone of the Tibetan block. The focus is on the eastern boundary structural zone, i.e. the generalized north-south seismic belt. At the same time, attention should be paid to the earthquake-prone favorable regions such as the seismic empty sections of the major active faults in the northern Qaidam block boundary zone and other regions. For the northern region of the Tibetan block, the areas where the earthquakes of magnitude 7 or above are most likely to occur in the future will be the boundary structural zones of Qaidam active tectonic block, including Qilian-Haiyuan fault zone, the northern margin fault zone of western Qinling, the eastern Kunlun fault zone and the Altyn Tagh fault zone, etc., as well as the empty zones or empty fault segments with long elapse time of paleo-earthquake or no large historical earthquake rupture in their structural transformation zones. In future work, in-depth research on the seismogenic tectonic environment in the above areas should be strengthened, including fracture geometry, physical properties of media, fracture activity behavior, earthquake recurrence rule, strain accumulation degree, etc., and then targeted strengthening tracking monitoring and earthquake disaster prevention should be carried out. 相似文献
Since 1900AD, the Tibetan block area has experienced three periods of high tides of earthquake activity clusters(also known as earthquake series), among which the Haiyuan-Gulang earthquake series from 1920 to 1937 mainly occurred around the active block boundary structural belt on the periphery of the Tibetan block region, with the largest earthquake occurring on the large active fault zone in the northeastern boundary belt. The Chayu-Dangxiong earthquake series from 1947 to 1976 mainly occurred around the large-scale boundary active faults of Qiangtang block, Bayankala block and eastern Himalayan syntaxis within the Tibetan block area. In the 1995-present Kunlun-Wenchuan earthquake series, 8 earthquakes with MS7.0 or above have occurred on the boundary fault zones of the Bayankala block. Therefore, the Bayankala block has become the main area of large earthquake activity on the Tibetan plateau in the past 20a. The clustering characteristic of this kind of seismic activity shows that in a certain period of time, strong earthquake activity can occur on the boundary fault zone of the same block or closely related blocks driven by a unified dynamic mechanism, reflecting the overall movement characteristics of the block. The migration images of the main active areas of the three earthquake series reflect the current tectonic deformation process of the Tibetan block region, where the tectonic activity is gradually converging inward from the boundary tectonic belt around the block, and the compression uplift and extrusion to the south and east occurs in the plateau. This mechanism of gradual migration and repeated activities from the periphery to the middle can be explained by coupled block movement and continuous deformation model, which conforms to the dynamic model of the active tectonic block hypothesis.
A comprehensive analysis shows that the Kunlun-Wenchuan earthquake series, which has lasted for more than 20a, is likely to come to an end. In the next 20a, the main active area of the major earthquakes with magnitude 7 on the continental China may migrate to the peripheral boundary zone of the Tibetan block. The focus is on the eastern boundary structural zone, i.e. the generalized north-south seismic belt. At the same time, attention should be paid to the earthquake-prone favorable regions such as the seismic empty sections of the major active faults in the northern Qaidam block boundary zone and other regions. For the northern region of the Tibetan block, the areas where the earthquakes of magnitude 7 or above are most likely to occur in the future will be the boundary structural zones of Qaidam active tectonic block, including Qilian-Haiyuan fault zone, the northern margin fault zone of western Qinling, the eastern Kunlun fault zone and the Altyn Tagh fault zone, etc., as well as the empty zones or empty fault segments with long elapse time of paleo-earthquake or no large historical earthquake rupture in their structural transformation zones. In future work, in-depth research on the seismogenic tectonic environment in the above areas should be strengthened, including fracture geometry, physical properties of media, fracture activity behavior, earthquake recurrence rule, strain accumulation degree, etc., and then targeted strengthening tracking monitoring and earthquake disaster prevention should be carried out. 相似文献
12.
松潘-甘孜地块东部、川滇地块及四川盆地西部属青藏高原东部,是中国大陆内部强烈地震发生的主要地区之一.本研究利用四川区域数字地震台网2000年1月至2010年4月的地震波形资料,使用剪切波分裂系统分析方法(SAM),获得了研究区内44个台站的快剪切波偏振方向和慢剪切波的时间延迟.剪切波分裂参数的空间分布特征显示,由于受到区域主压应力场以及局部地质结构的影响,快剪切波的偏振方向表现出复杂的特征.龙门山断裂带北东段和西南段的快剪切波偏振方向分别显示北东和北西的优势方向,川滇菱形地块西北部和东南部的快剪切波偏振方向分别显示近东西和北北西的优势方向.青川断裂北侧和南侧地震的快剪切波偏振方向分别为近南北向和近东西向,北侧地震的慢剪切波的时间延迟大于该断裂南侧地震的慢剪切波时间延迟.研究表明,复杂的地质结构以及活动断裂的几何形态会造成剪切波分裂参数的区域化的分布特征. 相似文献
13.
青藏高原东缘是研究青藏高原地壳物质向东侧向挤出的焦点地区.为探索青藏高原东向挤出其东部壳幔结构响应及深部地质构造依据,本文利用卫星测高重力数据、数字地震台网("喜马拉雅"项目一期)634个台站的观测数据、以及跨越龙门山构造带、攀西构造带的两条长周期大地电磁测深资料,获得了青藏高原东缘视密度物性结构、P波速度异常结构、以及电性成像结构.物性成像结果表明:(1)松潘地块、川滇地块中-下地壳、上地幔具有低密度、低速、高导的韧性物性结构,部分地区这种韧性物性结构甚至可到达150 km处;(2)四川盆地下方扬子克拉通岩石圈具有稳定的高密度、高速、高阻的刚硬物性结构,其结构向下可延伸至150 km深处;(3)青藏高原东缘横向和垂向的物性结构差异,为揭示龙门山构造带、川滇地块隆升机制提供了物质基础和动力学依据;(4)岩石圈物性结构中,沿岷山一龙门山一锦屏山一玉龙雪山构造带一线存在明显的密度、速度梯级带,其东西两侧呈明显物性二元结构,该物性梯级带可能反映了中上扬子地块西边界位置. 相似文献
14.
三江地区位于青藏高原东南缘，川滇菱形块体的西侧.受陆-陆板块碰撞作用的影响，构造活动强烈，地震活动频繁.为研究该区的应力环境、构造特征及二者间的关系，本文使用三江流动线性地震台阵SL-Array（2016-12—2017-05）和国家固定地震台网（2015-01—2017-12）记录到的地震波形资料，运用剪切波分裂分析技术研究三江地区上地壳各向异性研究.计算得到该区域快剪切波优势偏振方向为NNW向，与区域主压应力方向一致.结果显示各向异性特征有分区性，以维西—乔后断裂和小金河—丽江断裂为界，将线性台阵划分为A、B和C三个区域.A区快波优势偏振方向表现出与区域主压应力方向的一致性.B区局部构造复杂，快波优势偏振方向表现为近NS向.C区结果比较离散，无明显快波优势方向.自西向东，研究区域快波优势偏振方向表现为NNW至近NS向的变化趋势.计算得到研究区域慢剪切波时间延迟为2.8±1.7 ms·km-1，其中B区最大，A区最小，反映了该区地壳介质各向异性强度的不均匀分布，也揭示了区域构造复杂程度与地震各向异性强度的关系. 相似文献
15.
本文以构造应力场观测结果、 岩石圈流变特性为约束, 采用摩擦接触单元反映断裂带空间分段特征, 以最接近真实地下环境的非线性黏弹性材料为模型的本构关系, 建立包括安宁河—则木河—小江断裂带的三维有限元模型, 模拟在速度边界条件和重力势能等动力因素共同作用下的断裂带应力分布特性. 研究结果表明, 模拟得到的断裂带现今构造应力场与地震活动有明显的对应关系, 应力比较集中的区域, 如石棉、 西昌、 巧家、 东川附近, 极有可能是未来的地震危险区域. 相似文献
16.
利用云南和四川数字地震观测台网记录的数字化地震资料,开展了川滇地区不同频率的QLg层析成像研究,反演结果的空间分辨率小于100 km.反演结果表明,川滇地区介质的横向不均匀性强烈,QLg高低值差异显著.川滇地区显著的高衰减区有川滇菱形块体的东南边界（即沿鲜水河至安宁河以及思茅—澜沧—普洱区）,滇西北地区、龙门山断裂以西松潘—茂文地区、巴塘及理塘强震区等,Lg波高衰减区的分布与构造活动强烈、强震活动或大震破裂造成介质破碎区、低速区等相关,表明构造活动强烈或大震破裂造成的介质破碎、热物质沿活动断裂上涌等可能是川滇地区低QLg的主要成因.显著的低衰减区有川东盆地、滇东南地区以及金沙江、怒江断裂的中段区域,滇中块体内部也呈现出相对的低衰减特征.Lg波低衰减区与地震活动性弱、速度正异常等相关,表明川滇地区Lg波的低衰减区与地壳变形、地震活动性及水热活动弱、块体稳定等有关. 相似文献
17.
FOCAL MECHANISM AND SEISMOGENIC STRUCTURE OF THE M5.0 YUEXI EARTHQUAKE ON 1 OCT. 2014, SOUTHWESTERN CHINA 下载免费PDF全文
下载免费PDF全文 The Oct.1,2014 M5.0 Yuexi earthquake occurred on the Daliang Shan fault zone where only several historical moderate earthquakes were recorded.Based on the waveform data from Sichuan regional seismic network,we calculated the focal mechanism solution and centroid depth of the M5.0 Yuexi earthquake by CAP (Cut and Paste) waveform inversion method,and preliminarily analyzed the seismogenic structure.We also calculated the apparent stress values of the M5.0 earthquake and other 14 ML≥4.0 events along the Shimian-Qiaojia fault segment of the eastern boundary of the Sichuan-Yunnan block.The result indicates that the parameters of the focal mechanism solution are with a strike of 256°,dip of 62°,and slip of 167° for the nodal plane Ⅰ,and strike of 352°,dip of 79°,and slip of 29° for the nodal plane Ⅱ.The azimuth of the P axis is 121° with dip angle of 11°,the azimuth of T axis is 217° with dip angle of 28°,and the centroid depth is about 11km,and moment magnitude is MW5.1.According to the focal mechanism solution and the fault geometry near the epicenter,we infer that the seismogenic fault is a branch fault,i.e.,the Puxiong Fault,along the central segment of the Daliang Shan fault zone.Thus,the nodal plane Ⅱ was interpreted as the coseismic rupture plane.The M5.0 Yuexi earthquake is a strike-slip faulting event with an oblique component.The above findings reveal the M5.0 Yuexi earthquake resulted from the left-lateral strike-slip faulting of the NNW Dalang Shan fault zone under the nearly horizontal principal compressive stress regime in an NWW-SEE direction.The apparent stress value of the Yuexi earthquake is 0.99MPa,higher than those of the ML ≥ 4.0 earthquakes along the eastern boundary of the Sichuan-Yunnan block since 2008 Wenchuan M8.0 earthquake,implying a relatively high stress level on the seismogenic area and greater potential for the moderate and strong earthquake occurrence.It may also reflect the current increasing stress level of the entire area along the eastern boundary,and therefore,posing the risk of strong earthquakes there. 相似文献
18.
The Wenchuan earthquake occurred near the "triple junction" linking the Bayan Har block, the South China block, and the Sichuan-Yunnan rhombic block, and its influences on the surrounding blocks and the main fault zones in the Sichuan-Yunnan region, i.e., the block boundary zone, cannot be ignored. In this paper, changes of movement and stress of the fault zones before and after a strong earthquake were simulated based on the GPS repetition survey results recently obtained during 1999–2007, 2009–2011, and 2011–2013 with a two-dimensional finite-element contact model and the "block- loading" method. The results show that, before the Wenchuan earthquake, the movement of the Longmenshan fault zone was very slow and its compressive stress accumulated rapidly; after the Wenchuan earthquake, movements toward the E-SSE direction of the Bayan Har, southwestern Yunnan, and rhombic blocks were enhanced, and the dextral and horizontal compressive speeds and annual accumulative compressive stress of the Longmenshan fault zone increased markedly by factors of 4.5, 2.1, and 2.5, respectively. The southern Xianshuihe, Anninghe, Zemuhe, Daliangshan, and Lijiang-Xiaojinhe fault zones accumulated compressive stress rapidly, forming enhanced compressive stress zones along a NE strike crossing the central part of the Sichuan-Yunnan region. The tensional movement of the Xianshuihe fault zone was enhanced and the slip movement in the central part of the zone was reversed in a short time. The changes are tightly related to the medium-intensity earthquakes that occurred during the same period in this region, revealing that the spatial migration of seismic activity is related to changes of movement of the blocks. 相似文献
19.
通过收集鄂尔多斯块体西缘固定地震台网2010年6月至2017年8月的近场地震资料，选择符合剪切波分裂分析的14个台站记录的共137个有效事件波形，得到了剪切波分裂参数，即快剪切波（简称快波）偏振方向和慢剪切波（简称慢波）时间延迟.结果表明，研究区的快波偏振方向和慢波时间延迟具有明显的分区特征，快波偏振方向主要与构造应力场方向或者断层走向大体一致.鄂尔多斯西缘紧邻块体边界的台站，快波偏振方向自北向南呈现NS、NNE、NE向的变化，与青藏高原东北缘主压应力方向变化基本一致.银川地堑东西两侧的快波偏振方向有差异，东侧区域主要受青藏高原NNE向挤压和黄河-灵武断裂共同影响，而西侧区域可能受到阿拉善块体与鄂尔多斯块体之间的NW方向的主张应力和阿拉善块体内部应力分布的影响；鄂尔多斯块体、阿拉善块体与青藏高原的交汇区快波优势偏振方向为NE向，与青藏高原东北缘主压应力方向一致；海原断裂带及以南区域快剪切波优势偏振方向为WNW向，与断裂走向基本一致，较好的说明了海原断裂带为活跃的活动断裂.构造与断裂分布都是控制快波偏振方向的主要因素，走滑断裂上的台站快波偏振方向与断裂走向一致，表明这些台站主要受到断裂的强烈影响；走滑断裂附近的个别台站快波偏振方向呈现与构造应力场一致的方向，表明几乎没有受到断裂的影响.鄂尔多斯、阿拉善与青藏高原的交汇区平均时间延迟高于其他地区，反映了青藏高原在NE向运动过程中，受到稳定的鄂尔多斯块体阻挡作用，导致了交汇区地壳介质各向异性程度增加.以海原断裂带到六盘山断裂带为界，其两侧区域的各向异性差异性明显，揭示了应力与介质特性的差异，暗示其邻近区域，特别在海原断裂带东端到六盘山断裂带与鄂尔多斯块体西缘交汇区域，可能有较高的强震危险背景.本研究还对该区域的地壳和上地幔的耦合问题进行了初步讨论. 相似文献
20.
川滇菱形块构造应力场的数值模拟 总被引：2，自引：0，他引：2
本文以滇西北的实测绝对应力资料为依据,用有限元方法模拟了川滇菱形块的构造应力场;讨论了该地区构造应力状态与强震分布的关系;计算成果与实测地震数据基本吻合,由数值分析得到的三个最大剪应力高区,分别对应于菱形块两侧的三个地震带。定量地展现了该区现今构造应力的分布状态 相似文献