共查询到20条相似文献，搜索用时 31 毫秒
1.
Response parameters used to estimate nonstructural damage differ depending on whether deformation‐sensitive or acceleration‐sensitive components are considered. In the latter case, seismic demand is usually represented through floor spectra, that is response spectra in terms of pseudo‐acceleration, which are calculated at the floor levels of the structure where the nonstructural components are attached to. Objective of this paper is to present a new spectrum‐to‐spectrum method for calculating floor acceleration spectra, which is able to explicitly account for epistemic uncertainties in the modal properties of the supporting structure. By using this method, effects on the spectra of possible variations from nominal values of the periods of vibration of the structure can be estimated. The method derives from the extension of closed‐form equations recently proposed by the authors to predict uniform hazard floor acceleration spectra. These equations are built to rigorously account for the input ground motion uncertainty, that is the record‐to‐record variability of the nonstructural response. In order to evaluate the proposed method, comparisons with exact spectra obtained from a standard probabilistic seismic demand analysis, as well as spectra calculated using the Eurocode 8 equation, are finally shown. Copyright © 2017 John Wiley & Sons, Ltd. 相似文献
2.
Vladimir Sokolov Klaus-Peter Bonjer Friedemann Wenzel 《Soil Dynamics and Earthquake Engineering》2004,24(12):929-947
The paper presents recent achievements in evaluations of site-dependent seismic hazard in Romania and the capital city of Bucharest caused by the Vrancea focal zone (SE-Carpathians). The zone is characterized by a high rate of occurrence of large earthquakes in a narrow focal volume at depths 60–170 km. The database that was used for the hazard evaluation includes parameters of seismicity, ground-motion source scaling and attenuation models (Fourier amplitude spectra), and site-dependent spectral amplification functions. Ground-motion characteristics were evaluated on the basis of several hundred records from more than 120 small magnitude (M 3.5–5) earthquakes occurred in 1996–2001 and a few tens of acceleration records obtained during four large (M 7.4, 7.2, 6.9 and 6.3) earthquakes. The data provide a basis for probabilistic seismic hazard assessment in terms of peak ground acceleration, peak spectral acceleration and MSK intensity using Fourier amplitude spectra for various exceedance probabilities or average return periods. It has been shown that the influence of geological factors plays very important role in distribution of earthquake ground-motion parameters along the territory of Romania. 相似文献
3.
The characterisation of the seismic hazard input is a critical element of any seismic design code, not only in terms of the absolute levels of ground motion considered but also of the shape of the design spectrum. In the case of Europe, future revisions of the seismic design provisions, both at a national and a pan‐European level, may implement considerable modifications to the existing provisions in light of recent seismic hazard models, such as the 2013 European Seismic Hazard Model. Constraint of the shape of the long‐period design spectrum from seismic hazard estimates on such a scale has not been possible, however, owing to the limited spectral period range of existing ground motion models. Building upon recent developments in ground motion modelling, the 2013 European Seismic Hazard Model is adapted here with a new ground motion logic tree to provide a broadband Probabilistic Seismic Hazard Analysis for rock sites across a spectral period range from 0.05 seconds to 10.0 seconds. The resulting uniform hazard spectra (UHS) are compared against existing results for European and broadband Probabilistic Seismic Hazard Analysis and against a proposed formulation of a generalised design spectrum in which controlling parameters can be optimised to best fit the uniform hazard spectra in order to demonstrate their variability on a European scale. Significant variations in the controlling parameters of the design spectrum are seen both across and within stable and active regions. These trends can help guide recalibrations of the code spectra in future revisions to seismic design codes, particularly for the longer‐period displacement spectrum. 相似文献
4.
—?The problem of accounting for local soil effect on earthquake ground motion is especially urgent when assessing seismic hazard – recent needs of earthquake engineering require local site effects to be included into hazard maps. However, most recent works do not consider the variety of soil conditions or are performed for generalized site categories, such as “hard rock,”“soft soil” or “alluvium.” A technique of seismic hazard calculations on the basis of the Fourier Amplitude Spectra recently developed by the authors allows us to create hazard maps involving the influence of local soil conditions using soil/bedrock spectral ratios. Probabilistic microzoning maps may be constructed showing macroseismic intensity, peak ground acceleration, response and design spectra for various return periods (probability of exceedance), that allow optimization of engineering decisions. An application of this approach is presented which focused on the probabilistic microzoning of the Tashkent City. 相似文献
5.
A project has been implemented in recent years for assessing seismic hazard in the Italian territory on probabilistic bases, to be used as scientific background for the revision of the current seismic zonation. A consolidated approach was considered for the purpose; seismic hazard was estimated in terms of peak ground acceleration and macroseismic intensity. As the computer code employed allows the user to make specific choices on some input data, some rather unorthodox decisions were taken regarding earthquake catalogue completeness, seismicity rates, boundaries of the seismogenic zones, definition of the maximum magnitude, attenuation relation, etc. The overwhelming amount of geological and seismological data for Italy (just consider, for example, that the earthquake catalogue collects events which occurred over the last ten centuries) permits the operator to make different choices, more or less cautiously. It is quite interesting, then, to evaluate the influence of the specific choices on the final hazard results as a comparison to traditional possibilities. The tests performed clearly indicate the critical choices and quantify their contribution. In particular, we consider thorough comprehension of the space geometry of the earthquake source boundaries and the adequacy of the attenuation relation in modelling the radiation pattern very important. 相似文献
6.
A comparative study of risk assessment methodologies based on macroseismic intensity and response spectrum approaches is presented. To facilitate the comparative study, a spreadsheet-based software tool ‘SeisVARA’ is developed for the estimation of earthquake risk, in which the seismic hazard can be specified either in terms of macroseismic intensity, or peak ground acceleration in combination with the spectral shape and soil amplification model of various earthquake building codes, or in terms of inelastic response spectra using the ‘next generation attenuation relationships’. A comparison of these different approaches is conducted for a typical city in northern India. In addition, the effect of different parameters, e.g., level of PGA, spectral shape, source-site parameters, and soil amplification models, is studied. It is observed that not only the different approaches result in widely varying damage and loss estimates, but also the variation of parameters within a given approach can result in considerable differences. 相似文献
7.
本文根据保定市及周围地区的地震地质环境，在地震危险性分析的基础上，采用等效线性一维波动方程进行土层的地震反应分析。给出50年超越概率63％、10％、2％基岩和地面的水平向峰值加速度、反应谱（场址基本烈度Ⅶ度）和地震影响系数最大值。该结果为抗震设计提供了可靠依据，具有应用价值。 相似文献
8.
9.
B. Pace D. Albarello P. Boncio M. Dolce P. Galli P. Messina L. Peruzza F. Sabetta T. San�� F. Visini 《Bulletin of Earthquake Engineering》2011,9(1):199-230
After the April 6th 2009 L’Aquila earthquake (M
w
6.3), where 306 people died and a further 60,000 were displaced, seismic microzoning investigations have been carried out
for towns affected by a macroseismic intensity equal to or greater than 7 MCS. Based upon seismotectonic data, historical
seismicity and strong motion records, we defined input spectra to be used in the numerical simulations of seismic microzoning
in four key municipalities, including the town of L’Aquila. We adopted two main approaches: uniform hazard response spectra
are obtained by a probabilistic seismic hazard assessment introducing some time-dependency for individual faults on the study
area; a deterministic design spectrum is computed from magnitude/distance pairs extracted by a stationary probabilistic analysis
of historical intensities. The uniform hazard spectrum of the present Italian building code represents the third, less restrictive,
response spectrum to be used for the numerical simulations in seismic microzoning. Strong motions recordings of the main shock
of the L’Aquila sequence enlighten the critical role played by both the local response and distances metric for sites located
above a seismogenic fault; however, these time-histories are compatible with the uncertainties of a deterministic utilization
of ground motion predictive equations. As recordings at very near field are rare, they cannot be neglected while defining
the seismic input. Disaggregation on the non-Possonian seismotectonic analysis and on the stationary site-intensity estimates
reach very similar results in magnitude-distance pairs identification; we interpret this convergence as a validation of the
geology-based model by historical observations. 相似文献
10.
几种仪器烈度算法在汶川地震与芦山地震中的可靠性比较 总被引：1，自引：0，他引：1
破坏性地震发生后, 特别是在通信中断的情况下, 利用仪器烈度快速估计地震动强度(烈度)的分布情况, 可为开展最有效的地震应急救援提供决策依据. 该文介绍了现有的几种仪器烈度算法, 并利用汶川地震与芦山地震中获得的强震加速度记录对各种算法的可靠性进行了比较. 结果表明, 在这两次地震中只利用地震动峰值参数确定仪器烈度的算法可靠性较低, 而考虑反应谱特性的算法可靠性更高. 在未得到更多强震数据的检验前, 建议采用袁一凡提出的仪器烈度算法, 或利用谱烈度值确定仪器烈度的算法, 或利用加速度反应谱值确定仪器烈度的算法. 相似文献
11.
高孟潭 《地震学报(英文版)》2003,16(6):639-645
1 Background of the new national seismic zoning map The policy of seismic disaster mitigation in the Chinese mainland is prevention first. According to the law, the earthquake design for ordinary structures must fit the demand of national seismic zoning map. Seismic zoning map is the basis of the earthquake design (TANG, 1998; WU, et al, 1998). The seismic zoning map must be updated with the progress in methodology and accumula-tion of the data. There are three generations of national seis… 相似文献
12.
The New Seismic Zoning Map of China was prepared from 1987 to 1990 and officially promulgated in 1991.In comparison with the previous two seismic zoning maps prepared in 1957 and 1977,some new methods were applied to upgrade the method currently used for seismic hazard analysis.First,a probabilistic method was used instead of the deterministic analysis was used for previous mapping.Second,by taking advantages of the long history of historical seismic data in China,the nonhomogeneity of seismicity both in space and in time has been fully considered and hence the over-and/or underestimation of seismic hazard could be avoided.Third,the results of middle-and long-term earthquake prediction based on tectonic evidence have been incorporated into seismic hazard analysis.In addition,the attenuation laws for both intensity and peak acceleration of strong motion as the mapping parameters are also presented.Finally,an evaluation of the New Seismic Map and its effect on engineering application,such as aseismic desi 相似文献
13.
高烈度地震区重力式挡土墙由于地基承载力不足导致墙身失稳是一种较常见震害类型。基于拟静力法原理,利用极限分析上限定理对地震作用下挡土墙地基极限承载力进行求解,通过典型算例分析了极限承载力随地震动峰值加速度的变化关系与机理,讨论了地基土强度参数对其变化趋势的影响,提出了同时考虑设防烈度和地基土性的挡土墙地基抗震容许承载力修正方法及相应修正系数取值建议。结果表明:设防烈度在9度及以内时,随着地震动峰值加速度增加,挡土墙地基极限承载力近似呈线性下降,下降速率与地基土黏聚力呈负相关性,而受内摩擦角的影响不显著;地震作用加剧挡土墙基底荷载倾斜与偏心导致地基破坏区缩减是造成极限承载力下降的主要原因;设防烈度大于7度时,挡土墙地基抗震容许承载力较天然工况下有所降低,8度和9度设防烈度对应的修正系数约为0.9和0.7。 相似文献
14.
新的国家地震区划图即中国地震动参数区划图已于2001年8月正式出版．该地震区划图包括峰值加速度区划图和反应谱特征周期区划图．该区划图风险水平为50年超越概率0.1, 比例尺为1∶400万．该区划图已经作为国家标准颁布．本文介绍了该区划图编制的背景、编图的技术思路以及主要科学问题、基本特征和使用． 相似文献
15.
场地条件对地震动参数影响的关键问题 总被引：16，自引：8，他引：8
场地条件对地震动的影响很大,在地震动幅值（如峰值加速度）和频谱特性（如反应谱特征周期）的变化上均有体现,而我国现行抗震设计规范没有考虑不同场地条件下地震动峰值加速度和加速度反应谱平台值的变化。本文介绍了我国现行抗震设计规范中场地类别的划分方法、场地对地震动参数值的规定和存在的问题。详细分析了土层结构、覆盖层厚度等场地条件对地震动峰值加速度和反应谱的影响,以及已经取得的研究成果。最后,就场地分类、影响地震动参数的场地条件、地震动参数随场地条件调整的方法等,提出了有待进一步研究的问题。 相似文献
16.
为分析地下水的存在对地震动参数的影响,以3个实际场地作为计算土层,2条真实的地震波记录作为输入地震动,分别计算不含地下水工况和饱含地下水工况的土层地震反应。其中,不含地下水工况使用单相介质模型,饱含地下水工况使用双相介质模型,算法均使用有限差分方法,人工边界使用透射边界。根据得到的加速度时程,提取它们的峰值加速度和反应谱数据,经过对比分析,得出以下结论:(1)含地下水场地的地表峰值加速度要明显小于不含地下水场地的地表峰值加速度;(2)含地下水场地的地表加速度反应谱要大于不含地下水场地的反应谱值;(3)由于地下水的存在,场地放大系数反应谱特征周期向长周期改变,反应谱平台值变大。 相似文献
17.
Tsuneo Katayama 《地震工程与结构动力学》1982,10(1):149-163
A regression analysis was made on 277 acceleration response spectra computed from Japanese accelerograms by subdividing the data into discrete categories. Five magnitude and distance categories, and four ground condition categories were used. The maximum absolute acceleration amplitude is predicted as a product of three factors, each representing a weighting factor for magnitude, distance and ground condition category at each of the 18 response spectrum periods from 0·1 s to 4 s at a damping value of 5 per cent of critical. A method was then developed to evaluate seismic hazard in terms of acceleration response spectrum by using the prediction model and the seismicity data, and it was applied to obtain seismic macro-zoning maps of Japan which are dependent on the natural period of a structure. The results of the analysis indicated that a single seismic zoning map may not be sufficient to cover a variety of structures with a wide range of periods because the expected spectral shape differs according to the seismicity of the area. 相似文献
18.
Gottfried Grünthal Dietrich Stromeyer Christian Bosse Fabrice Cotton Dino Bindi 《Bulletin of Earthquake Engineering》2018,16(10):4339-4395
The basic seismic load parameters for the upcoming national design regulation for DIN EN 1998-1/NA result from the reassessment of the seismic hazard supported by the German Institution for Civil Engineering (DIBt). This 2016 version of the national seismic hazard assessment for Germany is based on a comprehensive involvement of all accessible uncertainties in models and parameters and includes the provision of a rational framework for integrating ranges of epistemic uncertainties and aleatory variabilities in a comprehensive and transparent way. The developed seismic hazard model incorporates significant improvements over previous versions. It is based on updated and extended databases, it includes robust methods to evolve sets of models representing epistemic uncertainties, and a selection of the latest generation of ground motion prediction equations. The new earthquake model is presented here, which consists of a logic tree with 4040 end branches and essential innovations employed for a realistic approach. The output specifications were designed according to the user oriented needs as suggested by two review teams supervising the entire project. Seismic load parameters, for rock conditions of \(v_{S30}\) = 800 m/s, are calculated for three hazard levels (10, 5 and 2% probability of occurrence or exceedance within 50 years) and delivered in the form of uniform hazard spectra, within the spectral period range 0.02–3 s, and seismic hazard maps for peak ground acceleration, spectral response accelerations and for macroseismic intensities. Results are supplied as the mean, the median and the 84th percentile. A broad analysis of resulting uncertainties of calculated seismic load parameters is included. The stability of the hazard maps with respect to previous versions and the cross-border comparison is emphasized. 相似文献
19.
Vera D’Amico Dario Albarello Ragnar Sigbjörnsson Rajesh Rupakhety 《Bulletin of Earthquake Engineering》2016,14(7):1797-1811
We present the results of probabilistic seismic hazard assessment for Iceland in the framework of the EU project UPStrat-MAFA using the so-called site approach implemented in the SASHA computational code. This approach estimates seismic hazard in terms of macroseismic intensity by basically relying on local information about documented effects of past seismic events in the framework of a formally coherent and complete treatment of intensity data. In the case of Iceland, due to the lack of observed intensities for past earthquakes, local seismic histories were built using indirect macroseismic estimates deduced from epicentral information through an empirical attenuation relationship in probabilistic form. Seismic hazard was computed for four exceedance probabilities for an exposure time of 50 years, equivalent to average return periods of 50, 200, 475 and 975 years. For some localities, further return periods were examined and deaggregation analysis was performed. Results appear significantly different from previous seismic hazard maps, though just a semi-qualitative comparison is possible because of the different shaking measure considered (peak ground acceleration versus intensity), and the different computational methodology and input data used in these studies. 相似文献
20.
Seismic Hazard in Terms of Spectral Accelerations and Uniform Hazard Spectra in Northern Algeria 总被引：1，自引：0，他引：1
Seismic hazard in terms of spectral acceleration (SA) has been estimated for the first time in northern Algeria. For this purpose, we have used the spatially-smoothed seismicity
approach. The present paper is intended to be a continuation of previous work in which we have evaluated the seismic hazard
in terms of peak ground acceleration (PGA) using the same methodology. To perform these evaluations, four complete and Poissonian seismic models have been used. One
of them considers earthquakes with magnitudes above MS 6.5 in the last 300 years, that is, the most energetic seismicity in the region.
Firstly, seismic hazard maps in terms of SA, at periods of 0.1, 0.2, 0.3, 0.4, 0.5, 1.0, 1.5 and 2.0 sec, with 39.3% and 10% probability of exceedance in 50 years, have
been obtained. Therefore, uniform hazard spectra (UHS) are computed and examined in detail for twelve of the most industrial and populated cities in northern Algeria. All the
reported results in this study are for rock soil and 5% of damping.
It is noteworthy that, in the seismic hazard maps as well as in the UHS plots, we observe maximum SA values in the central area of the Tell. The higher values are reached in the Chleff region (previously El Asnam), specifically
around the location of the destructive earthquakes of September 9, 1954 (MS 6.8), and October 10, 1980 (MS 7.3). These maximum values, 0.4 g and 1.0 g, are associated with periods of about 0.2 and 0.3 sec for return periods of 100
and 475 years, respectively. 相似文献