首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 46 毫秒
1.
Turkish regional geoid models have been developed by employing a reference earth gravitational model, surface gravity observations and digital terrain models. The gravimetric geoid models provide a ready transformation from ellipsoidal heights to the orthometric heights through the use of GPS/leveling geoid heights determined through the national geodetic networks. The recent gravimetric models for Turkish territory were computed depending on OSU91 (TG-91) and EGM96 (TG-03) earth gravitational models. The release of the Earth Gravitational Model 2008 (EGM08), the collection of new surface gravity observations, the advanced satellite altimetry-derived gravity over the sea, and the availability of the high resolution digital terrain model have encouraged us to compute a new geoid model for Turkey. We used the Remove-Restore procedure based on EGM08 and applied Residual Terrain Model (RTM) reduction of the surface gravity data. Fast Fourier Transformation (FFT) was then used to obtain the residual quasigeoid from the reduced gravity. We restored the individual contributions of EGM08 and RTM to the whole quasi-geoid height (TQG-09). Since the Helmert orthometric height system is adopted in Turkey, the quasi-geoid model (TQG-09) was then converted to the geoid model (TG-09) by making use of Bouguer gravity anomalies and digital terrain model. After all we combined a gravimetric geoid model with GPS/leveling geoid heights in order to obtain a hybrid geoid model (THG-09) (or a transformation surface) to be used in GPS applications. The RMS of the post-fit residuals after the combination was found to be ± 0.95 cm, which represents the internal precision of the final combination. And finally, we tested the hybrid geoid model with GPS/leveling data, which were not used in the combination, to assess the external accuracy. Results show that the external accuracy of the THG-09 model is ± 8.4 cm, a precision previously not achieved in Turkey until this study.  相似文献   

2.
A number of regional gravimetric geoid models have recently been determined for the Iran area, and a common problem is to select the best model, e.g. for engineering applications. A related problem is that in order to improve the local geoid models, the selection of the best Global Geopotential Model (GGM) model for the region is essential, to be used in a combined solution from GGM and local gravimetric data. We discuss these problems by taking advantage of 260 GPS/levelling points as an external tool for validation of different global and local geoid models in the absolute and relative senses. By using relative comparisons of the height differences between precise levelling and GPS/geoid models we avoid possible unknown systematic effects between the different types of observables.The study shows that the combination of the newly released GRACE model (GGM02C) with EGM96 geoid model fits the GPS/levelling data in Iran with the best absolute and relative accuracy among the GGMs. Among the local geoid models, the newly gravimetric geoid model IRG04 agrees considerably better with GPS/levelling than any of the other recent local geoid models. Its rms fit with GPS/levelling is 55 cm. Hence, we strongly recommend the use of this new model in any surveying engineering or GPS/levelling projects in the area.  相似文献   

3.
From the late 1990s, many studies on local geoid construction have been made in South Korea. However, the precision of the previous geoid has remained about 15 cm due to distribution and quality problems of gravity and GPS/levelling data. Since 2007, new land gravity data and GPS/levelling data have been obtained through many projects such as the Korean Land Spatilaization, Unified Control Point and Gravity survey on the Benchmark. The newly obtained data are regularly distributed to a certain degree and show much better improvement in their quality. In addition, an airborne gravity survey was conducted in 2008 to cover the Korean peninsula (South Korea only). Therefore, it is expected that the precision of the geoid could be improved. In this study, the new South Korean gravimetric geoid and hybrid geoid are presented based on land, airborne, ship‐borne, altimeter gravity data, geopotential model and topographic data. As for the methodology, the general remove‐restore approach was applied with the best chosen parameters in order to produce a precise local geoid. The global geopotential model EGM08 was used to remove the low‐frequency components using degree and order up to 360 and the short wavelength part of the gravity signal was dealt with by using the Shuttle Radar Topography Mission data. The parameters determined empirically in this study include for Stokes’ integral 0.5° and for Wong‐Gore kernel 110–120°, respectively and 10 km for both the Bjerhammar sphere depth and attenuation factor. The final gravimetric geoid in South Korea ranges from 20–31 m with a precision of 5.45 cm overall compared to 1096 GPS/levelling data. In addition, the South Korean hybrid geoid produces 3.46 cm and 3.92 cm for degrees of fitness and precision, respectively and a better statistic of 2.37 cm for plain and urban areas was achieved. The gravimetric and hybrid geoids are expected to improve further when the refined land gravity data are included in the near future.  相似文献   

4.
The continuous efforts on establishment and modernization of the geodetic control in Turkey include a number of regional geoid models that have been determined since 1976. The recently released gravimetric Geoid of Turkey, TG03, is used in geodetic applications where GPS-heights need to be converted to the local vertical datum. To reach a regional geoid model with improved accuracy, the selection of the appropriate global geopotential model is of primary importance. This study assesses the performance of a number of recent satellite-only and combined global geopotential models (GGMs) derived from CHAMP and GRACE missions’ data in comparison to the older EGM96 model, which is the underlying reference model for TG03. In this respect, gravity anomalies and geoid heights from the global geopotential models were compared with terrestrial gravity data and low-pass filtered GPS/levelling data, respectively. Also, five new gravimetric geoid models, computed by the Fast Fourier Transform technique using terrestrial gravity data and the geopotential models, were validated at the GPS/levelling benchmarks. The findings were also compared with the validation results of the TG03 model. The tests showed that as it was expected any of the high-degree combined models (EIGEN-CG03C, EIGEN-GL04C, EGM96) can be employed for determining the gravity anomalies over Turkey. In the west of Turkey, EGM96 and EIGEN-CHAMP03S fit the GPS/levelling surface better. However, all the tested GGMs revealed equal performance when they were employed in gravimetric geoid modelling after de-trending the gravimetric geoid model with corrector surface fitting. The new geoid models have improved accuracy (after fit) compared to TG03.  相似文献   

5.
本文研究了基于泊松小波径向基函数融合多代卫星测高及多源重力数据精化大地水准面模型的方法.分别以沿轨垂线偏差和大地水准面高高差作为卫星测高观测量,研究了使用不同类型测高数据对于大地水准面建模精度的影响.针对全球潮汐模型在浅水区域及部分开阔海域精度较低的问题,引入局部潮汐模型研究了不同潮汐模型对于大地水准面的影响.数值分析表明:相比于使用沿轨垂线偏差作为测高观测量,基于沿轨大地水准面高高差解算得到的大地水准面模型的精度更高,特别是在海域区域,其精度提高了2.3cm.由于使用沿轨大地水准面高高差作为测高观测量削弱了潮汐模型长波误差的影响,采用不同潮汐模型对大地水准面解算的影响较小.总体而言,船载重力及测高观测数据在海洋重力场的确定中呈现互补性关系,联合两类重力场观测量可以提高局部重力场的建模精度.  相似文献   

6.
This paper deals with a method for detection of local geoid deformations; as a consequence, the methods main application concerns geoid adjustment to GPS/levelling points. This is based on the fact that these points should present no local geoid deformation to avoid errors in the adjustments. These type of miscalculations would lead to an incorrect adjustment and result in further errors in subsequent studies with GPS in the proximity at the point with local deformation.The method proposed is based on predictions of gravity disturbance from geoid undulations using Poisson integral with modified kernel, and its comparison with the gravity disturbance from GPS and gravimetric observations.The use of gravity disturbance instead of gravity anomalies has been chosen since gravity disturbance is a quantity derived from GPS and not from levelling. The loss of accuracy arising with a local height reference system is therefore theoretically avoided as far as the differences in geodetic reference systems regarding positions of gravity measurements and coefficients of the global models are accounted for.Extended numerical tests using computed geoidal undulations and the corresponding gravity disturbances obtained from the geopotential model GPM98cr computed up to degree 720 illustrate the validity of the proposed method and its usefulness as local geoid deformations detection tool.Finally, the method is tested using real GPS/Gravimetric data and geoid models IBERGEO95 and EGG97 with good results.  相似文献   

7.
The transformation from the gravimetric to the GPS/levelling-derived geoid using additional gravity information for the covariance function of geoid height differences has been investigated in a test area in south-western Canada. A “corrector surface” model, which accounts for datum inconsistencies, long-wavelength geoid errors, vertical network distortions and GPS errors, has been constructed using least-squares collocation. The local covariance function of geoid height differences is usually obtained from residual values between the GPS/levelling and gravimetric geoid heights after the elimination of all known systematic distortions. If additional gravity data (in the form of gravity anomalies) are available, the covariance function of geoid height differences can be determined by the following steps: (1) transforming the GPS/levelling-derived geoid heights into gravity anomalies; (2) forming differences between the computed in step 1 and given gravity anomalies; (3) determining the parameters of the local covariance function of the gravity anomaly differences; (4) constructing an analytical covariance model for the geoid height differences from the covariance function of the gravity anomaly differences using the parameters derived in step 3. The advantage of the proposed method stems from the great number of gravity data used to derive the empirical covariance function. A comparison with the least-squares adjustment shows that the standard deviation of the residuals of the predicted geoid height differences with respect to the control point values decreases by 2.4 cm.  相似文献   

8.
In mountainous regions with scarce gravity data, gravimetric geoid determination is a difficult task that needs special attention to obtain reliable results satisfying the demands, e.g., of engineering applications. The present study investigates a procedure for combining a suitable global geopotential model and available terrestrial data in order to obtain a precise regional geoid model for Konya Closed Basin (KCB). The KCB is located in the central part of Turkey, where a very limited amount of terrestrial gravity data is available. Various data sources, such as the Turkish digital elevation model with 3 ?? × 3?? resolution, a recently published satellite-only global geopotential model from the Gravity Recovery and Climate Experiment satellite (GRACE) and the ground gravity observations, are combined in the least-squares sense by the modified Stokes?? formula. The new gravimetric geoid model is compared with Global Positioning System (GPS)/levelling at the control points, resulting in the Root Mean Square Error (RMS) differences of ±6.4 cm and 1.7 ppm in the absolute and relative senses, respectively. This regional geoid model appears to be more accurate than the Earth Gravitational Model 2008, which is the best global model over the target area, with the RMS differences of ±8.6 cm and 1.8 ppm in the absolute and relative senses, respectively. These results show that the accuracy of a regional gravimetric model can be augmented by the combination of a global geopotential model and local terrestrial data in mountainous areas even though the quality and resolution of the primary terrestrial data are not satisfactory to the geoid modelling procedure.  相似文献   

9.
This paper deals with the analysis of gravity anomaly and precise levelling in conjunction with GPS-Levelling data for the computation of a gravimetric geoid and an estimate of the height system bias parameter No for the vertical datum in Pakistan by means of least squares collocation technique. The long term objective is to obtain a regional geoid (or quasi-geoid) modeling using a combination of local data with a high degree and order Earth gravity model (EGM) and to determine a bias (if there is one) with respect to a global mean sea surface. An application of collocation with the optimal covariance parameters has facilitated to achieve gravimetric height anomalies in a global geocentric datum. Residual terrain modeling (RTM) technique has been used in combination with the EGM96 for the reduction and smoothing of the gravity data. A value for the bias parameter No has been estimated with reference to the local GPS-Levelling datum that appears to be 0.705 m with 0.07 m mean square error. The gravimetric height anomalies were compared with height anomalies obtained from GPS-Levelling stations using least square collocation with and without bias adjustment. The bias adjustment minimizes the difference between the gravimetric height anomalies with respect to residual GPS-Levelling data and the standard deviation of the differences drops from 35 cm to 2.6 cm. The results of this study suggest that No adjustment may be a good alternative for the fitting of the final gravimetric geoid as is generally done when using FFT methods.  相似文献   

10.
In 1991 the first determination of a gravimetric geoid in a test area in central Spain was computed by using least square collocation. In 1995 a gravimetric geoid in the Iberian Peninsula, Ibergeo95, was calculated by FFT. Nowadays an improved geoid of Andalusia, ANDALUSGeoid2002, has been computed by fast collocation procedure and remove-restore technique in the GRS80 Reference System. The computations have been done from 16562 free-air gravity anomaly data set, obtained from IGN (Instituto Geográfico Nacional) and BGI (International Gravity Bureau), the Earth Gravity Model EGM96 and detailed (100 m × 100 m), coarse (5 km × 5 km) and reference (20 km × 20 km) digital terrain models. Relative carrier-phase GPS measurements at 69 benchmarks of the Spanish Levelling Network in Andalusia have been done. The standard deviations of differences between ANDALUSGeoid2002 and GPS/levelling undulations after fitting the tilt have been ± 11 cm, ± 39 cm and ± 38 cm in western, eastern and whole Andalusia, respectively. The ANDALUSGeoid2002 shows an improvement of Ibergeo95 in this territory.  相似文献   

11.
Regional gravity field modeling with high-precision and high-resolution is one of the most important scientific objectives in geodesy,and can provide fundamental information for geophysics,geodynamics,seismology,and mineral exploration.Rectangular harmonic analysis(RHA)is proposed for regional gravity field modeling in this paper.By solving the Laplace’s equation of gravitational potential in local Cartesian coordinate system,the rectangular harmonic expansions of disturbing potential,gravity anomaly,gravity disturbance,geoid undulation and deflection of the vertical are derived,and so are the formula for signal degree variance and error degree variance of the rectangular harmonic coefficients(RHC).We also present the mathematical model and detailed algorithm for the solution of RHC using RHA from gravity observations.In order to reduce the edge effects caused by periodic continuation in RHA,we propose the strategy of extending the size of computation domain.The RHA-based modeling method is validated by conducting numerical experiments based on simulated ground and airborne gravity data that are generated from geopotential model EGM2008 and contaminated by Gauss white noise with standard deviation of 2 mGal.The accuracy of the 2.5′×2.5′geoid undulations computed from ground and airborne gravity data is 1 and 1.4cm,respectively.The standard error of the gravity disturbances that downward continued from the flight height of 4 km to the geoid is only 3.1 mGal.Numerical results confirm that RHA is able to provide a reliable and accurate regional gravity field model,which may be a new option for the representation of the fine structure of regional gravity field.  相似文献   

12.
Regional geoid resp. quasigeoid determinations are nowadays required with an accuracy of ±1 to 10 cm over distances from 100 to some 1000 km in order to meet the demands of geodesy, geophysics, oceanography and engineering. Especially the combination of GPS heighting with classical leveling is one of the primary drivers for precise geoid computations. As a consequence, the IAG International Geoid Commission recognized at its meeting in Milano, 1990, that there is an urgent need for a new European geoid computation. This solution should be significantly improved in spatial resolution and accuracy as compared to presently available models. This led to the decision to form a Subcommission for the Geoid in Europe, and the Institut für Erdmessung (IfE) was asked to serve as a computing center in this project.In the first part of this paper early geoid/quasigeoid computations for the area of Europe as well as more recent results obtained at IfE are summarized. The latter solutions include a gravimetric and an astrogravimetric quasigeoid, which have a spatial resolution of about 20 km and a relative accuracy of some dm. Then the possibilities for an improved European quasigeoid calculation are outlined, considering the availability of new and better global and regional data sets. An overview is given on the procedures currently under study at IfE and on the work performed at IfE since 1990. This work includes the collection and screening of new point gravity and terrain data, some investigations on the use of topographic information available at present, and the calculation of a preliminary quasigeoid solution for central, northern and western Europe including a GPS/leveling control. The paper closes with a survey on future activities at IfE within the European geoid project.  相似文献   

13.
Due to the successful operation of dedicated satellite gravity missions, nowadays high-accuracy global gravity field models have become available. This triggers the challenge to optimally combine this long to medium wavelength gravity field information derived from space-borne data with high-resolution terrestrial gravity data. In this paper, the least squares collocation concept is revised with the attempt to consistently unify the combination procedure in such a way that the full information contained in both data sets is merged. For example, in local or regional geoid determination the remove-restore method is usually applied only partially taking into account the accuracy of the global model coefficients used for the long-wavelength reduction. The key advantage of the extended formulation is the fact that it automatically accounts for the error covariance of all data types involved. The applicability, feasibility and performance of the proposed method is investigated in the frame of numerical closed-loop simulations. The two main fields of application, i.e., the improvement of a global gravity field model by terrestrial gravity field data, and, vice versa, the support to a regional geoid solution by the incorporation of a global gravity field model, have been analyzed and assessed. Although applied under simplified conditions, it could be shown that the method works and is practically applicable.  相似文献   

14.
Optimal Model for Geoid Determination from Airborne Gravity   总被引：2，自引：0，他引：2  
Two different approaches for transformation of airborne gravity disturbances, derived from gravity observations at low-elevation flying platforms, into geoidal undulations are formulated, tested and discussed in this contribution. Their mathematical models are based on Green's integral equations. They are in these two approaches defined at two different levels and also applied in a mutually reversed order. While one of these approaches corresponds to the classical method commonly applied in processing of ground gravity data, the other approach represents a new method for processing of gravity data in geoid determination that is unique to airborne gravimetry. Although theoretically equivalent in the continuous sense, both approaches are tested numerically for possible numerical advantages, especially due to the inverse of discretized Fredholm's integral equation of the first kind applied on different data. High-frequency synthetic gravity data burdened by the 2-mGal random noise, that are expected from current airborne gravity systems, are used for numerical testing. The results show that both approaches can deliver for the given data a comparable cm-level accuracy of the geoidal undulations. The new approach has, however, significantly higher computational efficiency. It would be thus recommended for real life geoid computations. Additional errors related to regularization of gravity data and the geoid, and to accuracy of the reference field, that would further deteriorate the quality of estimated geoidal undulations, are not considered in this study.  相似文献   

15.
This paper demonstrates estimation of time-varying gravity harmonic coefficients from GPS data of COSMIC and GRACE satellite missions. The kinematic orbits of COSMIC and GRACE are determined to the cm-level accuracy. The NASA Goddard's GEODYN II software is used to model the orbit dynamics of COSMIC and GRACE, including the effect of a static gravity field. The surface forces are estimated per one orbital period. Residual orbits generated from kinematic and reference orbits serve as observables to determine the harmonic coefficients in the weighted-constraint least-squares. The monthly COSMIC and GRACE GPS data from September 2006 to December 2007 (16 months) are processed to estimate harmonic coefficients to degree 5. The geoid variations from the GPS and CSR RL04 (GRACE) solutions show consistent patterns over space and time, especially in regions of active hydrological changes. The monthly GPS-derived second zonal coefficient closely resembles the SLR-derived and CSR RL04 values, and third and fourth zonal coefficients resemble the CSR RL04 values.  相似文献   

16.
Current constraints on the glacial isostatic adjustment (GIA) process are mainly provided by relative sea-level data and GPS measurements. Due to a lack of resolving power in the shallow earth (down to about 200 km), these data sets only provide weak constraints on the shallow viscosity structure and the thickness of the lithosphere. Future high-resolution gravity data, as expected from ESA’s Gravity field and steady-state Ocean Circulation Explorer (GOCE) launched on March 17, 2009, are predicted to provide additional information on the shallow earth, more specifically the viscosity structure. Here we present an overview of recent developments in extracting information on rheology and stratification of the shallow earth from high-resolution quasi-steady gravity and geoid data to be obtained from GOCE.  相似文献   

17.
珠峰地区似大地水准面精化与珠峰顶正高的确定   总被引：2，自引：0，他引：2       下载免费PDF全文
本文使用珠峰及其周边地区的重力数据与SRTM3、1∶50000 DEM、GTOPO30地形数据,以该地区的44个GPS水准点为控制,选择国内外的EGM96、WDM94、IGG05B、DQM2000D和CG03C作为参考重力场模型,采用移去-恢复技术,首次完成了珠峰地区分辨率为2.5′×2.5′高精度似大地水准面,其精度达到±9 cm,并据此推算了珠峰顶高程异常值. 再利用登山线路上的新测重力点与珠峰地形数据,依据严格的重力归算理论及移去-恢复技术,完成了珠峰顶似大地水准面与大地水准面差值计算,即珠峰正常高与正高的换算.  相似文献   

18.
基于有限元方法的陆海大地水准面衔接   总被引：1，自引：1，他引：0       下载免费PDF全文
大陆上用重力数据和GPS水准数据确定(似)大地水准面,海洋上用卫星测高数据确定(似)大地水准面.由于沿海地区和近岸海域往往缺少完好的重力数据,近岸海域卫星测高数据质量相对较差,两类大地水准面在陆海相接区域精度偏低且存在拼合差.纯几何方法拟合陆海局部区域大地水准面,不能顾及大地水准面的物理特性,拟合结果不稳定.顾及到大地水准面的物理特性,依据其在局部所应满足的数学物理方程,拟合陆海局部区域大地水准面问题,转化为Laplace第一边值问题.讨论了有限元法衔接陆海局部区域大地水准面的数学思想,给出了相应的数学模型.  相似文献   

19.
The depth determination from the gravity data in frequency domain is carried out using the classical fast Fourier transform (FFT) method utilizing scaling properties of ensemble of anomalous source. The problem of calculating power spectrum from the FFT is well described in the literature. Here, the application of other high-resolution methods of power spectrum calculation, such as maximum entropy method (MEM) and multi-taper method (MTM) are explored to estimate depth to anomalous sources. At the outset, the FFT, the MEM and the MTM are tested on synthetic gravity data, generated for different types of synthetic models and then all these methods are applied to the field gravity data of the Bengal basin. The MTM with scaling is found to be superior for providing the detailed subsurface information rather than the MEM and the FFT methods in the case of synthetic as well as field examples.  相似文献   

20.
Iran is a mountainous country with large lateral density variations of its crust. Constant density value is commonly used to determine the geoid models as well as topographic corrections. The effect of lateral density variation in the geoid can reach up to 14 cm in Iran which is not negligible in a precise geoid modelling. Also, the current height datum of Iran is based on the orthometric system but the effect of gravity variation was not applied in height parameter. Furthermore, the height systems of most neighbouring countries are defined as normal height. Connection of networks can be useful for the unification of height datum, geodynamics researches and optimal adjustment of levelling network. The new quasi-geoid model based on a recent EGM2008 global geo-potential model was created to solve the mentioned problem. The main purpose of the present study is to discuss the results of a research project in which a gravimetric quasi-geoid model for Iran was computed based on the least-squares modification of Stokes' formula. The evaluation is made using 475 GPS/levelling height anomalies covering the major parts of the country except the mountainous areas to the North and West. After a 7-parameter fit, the most promising attempt achieved a RMS value of 19 cm for the residuals based on the GPS/levelling data.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号