共查询到20条相似文献，搜索用时 31 毫秒
1.
New alternative formulations of exact boundary conditions for arbitrary three-dimensional (3D) free-surface topographies on seismic media have been derived. They are shown to be equivalent to previously published formulations, thereby verifying the validity of each set of formulations. The top of a curved grid represents the free-surface topography while the interior of the grid represents the physical medium. We assume the velocity–stress version of the viscoelastic wave equations to be valid in this grid before transforming the equations to a rectangular grid. In order to perform the numerical discretization we apply the latter version of the equations for seismic wave propagation simulation in the medium. The numerical discretization of the free-surface topography boundary conditions by second-order finite differences (FDs) is shown, as well as the spatially unconditional stability of the resulting system of equations. The FD order is increased by two for each point away from the free surface up to eight, which is the order used in the interior. We use staggered grids in both space and time and the second-order leap-frog and Crank– Nicholson methods for wavefield time propagation. An application using parameters typical of teleseismic earthquakes and explosions is presented using a 200 × 100 km2 area of real topography from southwestern Norway over a homogeneous medium. A dipping plane wave simulates a teleseismic P-wave incident on the surface topography. Results show conversion from P- to Rg- (short period fundamental mode Rayleigh) waves in the steepest and/or roughest topography, as well as attenuated waves in valleys and fjords. The codes are parallelized for simulation on fast supercomputers and PC-clusters to model high frequencies and/or large areas. 相似文献
2.
New formulations of boundary conditions at an arbitrary two-dimensional (2D) free-surface topography are derived. The top of a curved grid represents the free-surface topography while the grid's interior represents the physical medium. The velocity–stress version of the viscoelastic wave equations is assumed to be valid in this grid. However, the rectangular grid version attained by grid transformation is used to model wave propagation in this work in order to achieve the numerical discretization. We show the detailed solution of the particle velocities at the free surface resulting from discretizing the boundary conditions by second-order finite-differences (FDs). The resulting system of equations is spatially unconditionally stable. The FD order is gradually increased with depth up to eighth order inside the medium. Staggered grids are used in both space and time, and the second-order leap-frog and Crank–Nicholson methods are used for time-stepping. We simulate point sources at the surface of a homogeneous medium with a plane free surface containing a hill and a trench. Applying parameters representing exploration surveys, we present examples with a randomly realized surface topography generated by a 1D von Kármán function of order 1. Viscoelastic simulations are presented using this surface with a homogeneous medium and with a layered, randomized medium realization, all generating significant scattering. 相似文献
3.
4.
Seismic wavefield modeling in media with fluid-filled fractures and surface topography 总被引：3，自引：0，他引：3
We present a finite difference (FD) method for the simulation of seismic wave fields in fractured medium with an irregular (non-flat) free surface which is beneficial for interpreting exploration data acquired in mountainous regions. Fractures are introduced through the Coates-Schoenberg approach into the FD scheme which leads to local anisotropic properties of the media where fractures are embedded. To implement surface topography, we take advantage of the boundary-conforming grid and map a rectangular grid onto a curved one. We use a stable and explicit second-order accurate finite difference scheme to discretize the elastic wave equations (in a curvilinear coordinate system) in a 2D heterogeneous transversely isotropic medium with a horizontal axis of symmetry (HTI). Efficiency tests performed by different numerical experiments clearly illustrate the influence of an irregular free surface on seismic wave propagation in fractured media which may be significant to mountain seismic exploration. The tests also illustrate that the scattered waves induced by the tips of the fracture are re-scattered by the features of the free surface topography. The scattered waves provoked by the topography are re-scattered by the fractures, especially Rayleigh wave scattering whose amplitudes are much larger than others and making it very difficult to identify effective information from the fractures. 相似文献
5.
A 2D numerical finite-difference algorithm accounting for surface topography is presented. Higher-order, dispersion-bounded, cost-optimized finite-difference operators are used in the interior of the numerical grid, while non-reflecting absorbing boundary conditions are used along the edges. Transformation from a curved to a rectangular grid achieves the modelling of the surface topography. We use free-surface boundary conditions along the surface. In order to obtain complete modelling of the effects of wave propagation, it is important to account for the surface topography, otherwise near-surface effects, such as scattering, are not modelled adequately. Even if other properties of the medium, for instance randomization, can improve numerical simulations, inclusion of the surface topography makes them more realistic. 相似文献
6.
本文以基于改进BISQ模型的二维双相各向同性介质一阶速度-应力方程为基础，推导出了曲线坐标系下对应的方程，然后采用低频散、低耗散的同位网格MacCormack有限差分法来离散方程，并采用紧致的单边MacCormack差分格式结合牵引力镜像法来施加自由地表边界条件，实现了地震波场数值模拟.曲线网格有限差分法采用贴体网格来描述自由表面，地表的网格线紧贴地形，避免了台阶近似造成的数值散射.数值模拟结果表明，在双相介质起伏自由地表和分界面处，各类波型复杂的反射透射规律可以清晰展现，曲线网格有限差分法可以精确地解决地震波在含起伏地表的双相各向同性介质中的传播问题. 相似文献
7.
In this paper, we deduced the corresponding first-order velocity–stress equation for curvilinear coordinates from the first-order velocity–stress equation based on the modified Biot/squirt model for a two-dimensional two-phase medium. The equations are then numerically solved by an optimized high-order non-staggered finite difference scheme, that is, the dispersion relation preserving/optimization MacCormack scheme. To implement undulating free-surface topography, we derive an analytical relationship between the derivatives of the particle velocity components and use the compact finite-difference scheme plus a traction-image method. In the undulating free surface and the undulating subsurface interface of two-phase medium, the complex reflected wave and transmitted wave can be clearly recognized in the numerical simulation results. The simulation results show that the curvilinear-grid finite-difference method, which uses a body-conforming grid to describe the undulating surface, can accurately reduce the numerical scattering effect of seismic wave propagation caused by the use of ladder-shaped grid to fit the surfaces when undulating topography is present in a two-phase isotropic medium. 相似文献
8.
Modelling the wave phenomena in acoustic and elastic media with sharp variations of physical properties using the grid‐characteristic method 
下载免费PDF全文
下载免费PDF全文 Alena V. Favorskaya Michael S. Zhdanov Nikolay I. Khokhlov Igor B. Petrov 《Geophysical Prospecting》2018,66(8):1485-1502
This paper introduces a novel method of modelling acoustic and elastic wave propagation in inhomogeneous media with sharp variations of physical properties based on the recently developed grid‐characteristic method which considers different types of waves generated in inhomogeneous linear‐elastic media (e.g., longitudinal, transverse, Stoneley, Rayleigh, scattered PP‐, SS‐waves, and converted PS‐ and SP‐waves). In the framework of this method, the problem of solving acoustic or elastic wave equations is reduced to the interpolation of the solutions, determined at earlier time, thus avoiding a direct solution of the large systems of linear equations required by the FD or FE methods. We apply the grid‐characteristic method to compare wave phenomena computed using the acoustic and elastic wave equations in geological medium containing a hydrocarbon reservoir or a fracture zone. The results of this study demonstrate that the developed algorithm can be used as an effective technique for modelling wave phenomena in the models containing hydrocarbon reservoir and/or the fracture zones, which are important targets of seismic exploration. 相似文献
9.
基于应力、速度混合变量弹性波方程及任意四边形网格差分算子,给出了交错计算应力及速度的非规则网格弹性波应力一速度差分法该方法融合了有限元法能适应复杂形状边界及差分法无需计算刚度阵的特点,具有较高的计算精度,所需计算机存储空间较少,计算效率也很高．基于积分平衡方程引入了任意形状自由表面的边界条件,且通过局部滤波改善了自由表面边界条件的稳定性,使得该方法可应用于考虑地表形状影响的地震波数值模拟 相似文献
10.
We recently proposed an efficient hybrid scheme to absorb boundary reflections for acoustic wave modelling that could attain nearly perfect absorptions. This scheme uses weighted averaging of wavefields in a transition area, between the inner area and the model boundaries. In this paper we report on the extension of this scheme to 2D elastic wave modelling with displacement‐stress formulations on staggered grids using explicit finite‐difference, pseudo‐implicit finite‐difference and pseudo‐spectral methods. Numerical modelling results of elastic wave equations with hybrid absorbing boundary conditions show great improvement for modelling stability and significant absorption for boundary reflections, compared with the conventional Higdon absorbing boundary conditions, demonstrating the effectiveness of this scheme for elastic wave modelling. The modelling results also show that the hybrid scheme works well in 2D rotated staggered‐grid modelling for isotropic medium, 2D staggered‐grid modelling for vertically transversely isotropic medium and 2D rotated staggered‐grid modelling for tilted transversely isotropic medium. 相似文献
11.
During seismic wave propagation on a free surface, a strong material contrast boundary develops in response to interference by P- and S- waves to create a surfacewave phenomenon. To accurately determine the effects of this interface on surface-wave propagation, the boundary conditions must be accurately modeled. In this paper, we present a numerical approach based on the dynamic poroelasticity for a space–time-domain staggeredgrid finite-difference simulation in porous media that contain a free-surface boundary. We propose a generalized stess mirror formulation of the free-surface boundary for solids and fluids in porous media for the grid mesh on which lays the free-surface plane. Its analog is that used for elastic media, which is suitable for precise and stable Rayleigh-type surface-wave modeling. The results of our analysis of first kind of Rayleigh (R1) waves obtained by this model demonstrate that the discretization of the mesh in a similar way to that for elastic media can realize stable numerical solutions with acceptable precision. We present numerical examples demonstrating the efficiency and accuracy of our proposed method. 相似文献
12.
Application of a perfectly matched layer in seismic wavefield simulation with an irregular free surface 总被引：2，自引：0，他引：2 下载免费PDF全文
下载免费PDF全文 Haiqiang Lan Jingyi Chen Zhongjie Zhang Youshan Liu Jianguo Zhao Ruiqi Shi 《Geophysical Prospecting》2016,64(1):112-128
Recently, an effective and powerful approach for simulating seismic wave propagation in elastic media with an irregular free surface was proposed. However, in previous studies, researchers used the periodic condition and/or sponge boundary condition to attenuate artificial reflections at boundaries of a computational domain. As demonstrated in many literatures, either the periodic condition or sponge boundary condition is simple but much less effective than the well‐known perfectly matched layer boundary condition. In view of this, we intend to introduce a perfectly matched layer to simulate seismic wavefields in unbounded models with an irregular free surface. We first incorporate a perfectly matched layer into wave equations formulated in a frequency domain in Cartesian coordinates. We then transform them back into a time domain through inverse Fourier transformation. Afterwards, we use a boundary‐conforming grid and map a rectangular grid onto a curved one, which allows us to transform the equations and free surface boundary conditions from Cartesian coordinates to curvilinear coordinates. As numerical examples show, if free surface boundary conditions are imposed at the top border of a model, then it should also be incorporated into the perfectly matched layer imposed at the top‐left and top‐ right corners of a 2D model where the free surface boundary conditions and perfectly matched layer encounter; otherwise, reflections will occur at the intersections of the free surface and the perfectly matched layer, which is confirmed in this paper. So, by replacing normal second derivatives in wave equations in curvilinear coordinates with free surface boundary conditions, we successfully implement the free surface boundary conditions into the perfectly matched layer at the top‐left and top‐right corners of a 2D model at the surface. A number of numerical examples show that the perfectly matched layer constructed in this study is effective in simulating wave propagation in unbounded media and the algorithm for implementation of the perfectly matched layer and free surface boundary conditions is stable for long‐time wavefield simulation on models with an irregular free surface. 相似文献
13.
Multi‐block finite‐difference method for 3D elastodynamic simulations in anisotropic subhorizontally layered media 下载免费PDF全文
下载免费PDF全文 Prediction of elastic full wavefields is required for reverse time migration, full waveform inversion, borehole seismology, seismic modelling, etc. We propose a novel algorithm to solve the Navier wave equation, which is based on multi‐block methodology for high‐order finite‐difference schemes on curvilinear grids. In the current implementation, the blocks are subhorizontal layers. Smooth anisotropic heterogeneous media in each layer can have strong discontinuities at the interfaces. A curvilinear adaptive hexahedral grid in blocks is generated by mapping the original 3D physical domain onto a parametric cube with horizontal layers and interfaces. These interfaces correspond to the main curvilinear physical contrast interfaces of a subhorizontally layered formation. The top boundary of the parametric cube handles the land surface with smooth topography. Free‐surface and solid–solid transmission boundary conditions at interfaces are approximated with the second‐order accuracy. Smooth media in the layers are approximated up to sixth‐order spatial schemes. All expected properties of the developed algorithm are demonstrated in numerical tests using corresponding parallel message passing interface code. 相似文献
14.
We present a discrete modelling scheme which solves the elastic wave equation on a grid with vertically varying grid spacings. Spatial derivatives are computed by finite-difference operators on a staggered grid. The time integration is performed by the rapid expansion method. The use of variable grid spacings adds flexibility and improves the efficiency since different spatial sampling intervals can be used in regions with different material properties. In the case of large velocity contrasts, the use of a non-uniform grid avoids spatial oversampling in regions with high velocities. The modelling scheme allows accurate modelling up to a spatial sampling rate of approximately 2.5 gridpoints per shortest wavelength. However, due to the staggering of the material parameters, a smoothing of the material parameters has to be applied at internal interfaces aligned with the numerical grid to avoid amplitude errors and timing inaccuracies. The best results are obtained by smoothing based on slowness averaging. To reduce errors in the implementation of the free-surface boundary condition introduced by the staggering of the stress components, we reduce the grid spacing in the vertical direction in the vicinity of the free surface to approximately 10 gridpoints per shortest wavelength. Using this technique we obtain accurate results for surface waves in transversely isotropic media. 相似文献
15.
Michel Bouchon 《Pure and Applied Geophysics》1996,148(1-2):3-20
We review the application of the discrete wave number method to problems of scattering of seismic waves formulated in terms of boundary integral equation and boundary element methods. The approach is based on the representation of the diffracting surfaces and interfaces of the medium by surface distributions of sources or by boundary source elements, the radiation from which is equivalent to the scattered wave field produced by the diffracting boundaries. The Green's functions are evaluated by the discrete wave number method, and the boundary conditions yield a linear system of equations. The inversion of this system allows the calculation of the full wave field in the medium. We investigate the accuracy of the method and we present applications to the simulation of surface seismic surveys, to the diffraction of elastic waves by fractures, to regional crustal wave propagation and to topographic scattering. 相似文献
16.
三维声波方程相比二维声波方程能够更好的模拟三维空间的地震波传播，模拟标量近似下的弹性波在三维复杂介质的传播过程.基于非规则网格的正演模拟方法的格子法可以处理很好的刻画起伏地表、速度间断面等复杂构造，但是这类方法需要大量的几何描述来描述网格.本文提出了三维六面体双重网格的格子法来模拟声波方程，一方面该方法继承了格子法能够灵活处理自由表面和速度间断面的特性.另一方面，该方法通过双重网格的实现极大的减少了几何描述文件的大小，可以最大的实现GPU加速，实现粗粒度并行，在节省了几何描述空间的同时达到了很高的加速比. 相似文献
17.
We have implemented a 3D finite‐difference scheme to simulate wave propagation in arbitrary anisotropic media. The anisotropic media up to orthorhombic symmetry were modelled using a standard staggered grid scheme and beyond (monoclinic and triclinic) using a rotated staggered grid scheme. The rationale of not using rotated staggered grid for all types of anisotropic media is that the rotated staggered grid schemes are more expensive than standard staggered grid schemes. For a 1D azimuthally anistropic medium, we show a comparison between the seismic data generated by our finite‐difference code and by the reflectivity algorithm; they are in excellent agreement. We conducted a study on zero‐offset shear‐wave splitting using the finite‐difference modelling algorithm using the rotated staggered grid scheme. Our S‐wave splitting study is mainly focused on fractured media. On the scale of seismic wavelenghts, small aligned fractures behave as an equivalent anisotropic medium. We computed the equivalent elastic properties of the fractures and the background in which the fractures were embedded, using low‐frequency equivalent media theories. Wave propagation was simulated for both rotationally invariant and corrugated fractures embedded in an isotropic background for one, or more than one, set of fluid‐filled and dry fractures. S‐wave splitting was studied for dipping fractures, two vertical non‐orthogonal fractures and corrugated fractures. Our modelling results confirm that S‐wave splitting can reveal the fracture infill in the case of dipping fractures. S‐wave splitting has the potential to reveal the angle between the two vertical fractures. We also notice that in the case of vertical corrugated fractures, S‐wave splitting is sensitive to the fracture infill. 相似文献
18.
19.
Heterogeneous wave equations are more complicated numerically than homogeneous wave equations, but are necessary for physical validity. A wide variety of numerical solutions of seismic wave equations is available, but most produce strong numerical artefacts and local instabilities where model parameters change rapidly. Accuracy and stability of heterogeneous equations is achieved through staggered-grid formulations. A new pseudospectral staggered-grid algorithm is developed for the poroelastic (Biot) equations. The algorithm may be reduced to handle the elastic and acoustic limits of the Biot equations. Comparisons of results from poroelastic, elastic, acoustic and scalar computations for a 2D model show that porous medium parameters may affect amplitudes significantly. The use of homogeneous wave equations for modelling of a heterogeneous medium, or of a centred rather than a staggered grid, or of simplified (e.g. acoustic) wave equations when elastic or poroelastic media are synthesized, may produce erroneous or ambiguous interpretations. 相似文献
20.
We present an original implementation of the free-surface boundary condition in a mesh-free finite-difference method for simulating elastic wave propagation in the frequency domain. For elastic wave modelling in the frequency domain, the treatment of free surfaces is a key issue which requires special consideration. In the present study, the free-surface boundary condition is directly implemented at node positions located on the free-surface. Flexible nature of the mesh-free method for nodal distribution enables us to introduce topography into numerical models in an efficient manner. We investigate the accuracy of the proposed implementation by comparing numerical results with an analytical solution. The results show that the proposed method can calculate surface wave propagation even for an inclined free surface with substantial accuracy. Next, we calculate surface wave propagation in a model with a topographic surface using our method, and compare the numerical result with that using the finite-element method. The comparison shows the excellent agreement with each other. Finally, we apply our method to the SEG foothill model to investigate the effectiveness of the proposed method. Since the mesh-free method has high flexibility of nodal distribution, the proposed implementation would deal with models of topographic surface with sufficient accuracy and efficiency. 相似文献