共查询到20条相似文献，搜索用时 31 毫秒
1.
Ground roll waves interfere with seismic data. The suppression of ground roll waves based on the division of wavelet frequencies considers the low-frequency characteristics of ground roll waves. However, this method will not be effective when the ground roll wave and the effective signal have the same frequency bands because of overlapping. The radial trace transform (RTT) considers the apparent velocity difference between the effective signal and the ground roll wave to suppress the latter, but affects the low-frequency components of the former. This study proposes a ground roll wave suppression method by combining the wavelet frequency division and the RTT based on the difference between the ground roll wave velocity and the effective signal and their energy difference in the wavelet domain, thus making full use of the advantages of both methods. First, we decompose the seismic data into different frequency bands through wavelet transform. Second, the RTT and low-cut filtering are applied to the low-frequency band, where the ground roll waves are appearing. Third, we reconstruct the seismic record without ground roll waves by using the inverse RTT and the remaining frequency bands. The proposed method not only improves the ground roll wave suppression, but also protects the signal integrity. The numerical simulation and real seismic data processing results suggest that the proposed method has a strong ability to denoise while preserving the amplitude. 相似文献
2.
在深反射地震资料处理中,当来自深部的有效弱信号和噪声干扰频带差异较小且难以区分时,传统滤波方法的应用会受到限制.谱分解方法是一种使用离散傅里叶变换,基于信号的频率-振幅谱等信息生成高分辨率地震图像的方法,通常用来识别介质物性横向分布特征,处理复杂介质内频谱变化和局部相位的不稳定性等问题,包括定位复杂断层和小尺度断裂等.S变换作为一种新的时频分析方法,具有自动调节分辨率的能力,近些年来被广泛应用到勘探地震、大地电磁等数据处理中,逐渐成为地球物理方法中噪声压制的有效方法之一.与常规石油反射地震资料相比,深反射主动源地震为了探测深部结构信息,常采用大药量激发方式、长排列观测系统等,导致深部有效信号基本湮灭在噪声干扰之中.针对深反射数据特点,本文结合谱分解和S变换技术,首先设计了简单的脉冲函数实验数据,证实S变换方法的有效性,同时说明谱分解方法的效果受所用时频分析方法影响较大,而其中决定分辨能力的变换窗函数的选取尤为重要.在此基础上,分别应用到深反射地震资料的单道和叠加剖面实际数据上,对比分析了传统变换谱分解和S变换谱分解的应用效果,单道资料对比结果表明:相比传统谱分解,S变换谱分解方法具有自动调节分辨率的能力,能够精确的标定深反射地震资料中弱信号不同时刻的频率分量;叠加剖面资料应用结果表明:由S变换谱分解得到的剖面结果与其他谱分解方法结果整体上具有较高的一致性,同时清晰地刻画出原叠加剖面上被噪声湮灭的低频细节特征,提高了剖面的分辨率及同相轴连续性;对比结果明显看出,Gabor变换谱分解方法得到的结果同相轴较为破碎,分析原因认为这是由Gabor变换的时频分解方法的定长窗函数所致,窗口大小不会随着信号频率的变化来调节长度,只能在处理的过程中根据一定的记录长度范围选取窗函数参数,而S变换谱分解方法在窗函数的选取时,通过时变信号的局部频率特征自动调节窗口长度,能够更好的刻画各个频段的细节特征,在深反射剖面成像应用中效果尤为明显.本文结果表明S变换谱分解技术在深地震叠加剖面上的应用有效地提高了来自深部弱反射信号的信噪比和分辨率,并刻画出了叠加剖面上所不具有的低频细节特征,在实际深反射地震资料处理中能有效保护低频弱信号获得更好的成像效果.本文为深地震反射资料中弱信号的保护处理找到一种有效的方法. 相似文献
3.
面波噪声衰减是地震数据处理流程中的重要一环,传统的面波衰减方法主要依靠面波与有效信号的几何特征差异,在变换域中将两者进行分离.受复杂近地表因素的影响,面波往往呈现非线性特征,并且在变换域中面波与有效信号存在部分重叠,这都导致面波噪声与有效信号难以彻底分离,消除面波的同时也损伤了有效信号.针对这一问题,本文综合利用Curvelet变换对地震数据的稀疏表征特性以及地震子波支撑来构建方程,通过Curvelet域稀疏约束来恢复压制面波时损失掉的有效信号.文中对该方法进行了模型试算和实际资料处理,处理结果表明:本文方法能够在一定程度上恢复损失的有效信号,提高了面波压制方法的保幅性. 相似文献
4.
速度是地震偏移成像准确与否的关键所在.全波形反演综合利用地震波场运动学和动力学信息,能够得到相比传统速度建模方法更高频的成分.全波形反演的理论比较成熟,但实际应用成功的例子相对较少,特别是对于陆上地震资料.塔里木盆地地震地质条件复杂,为了实现缝洞型储层的准确成像,本文开展了针对目标靶区的全波形反演精细速度建场研究.采用一种时间域分层多尺度全波形反演流程:首先通过层析成像建立初始速度模型;其次利用折射波反演浅层速度模型;最后利用反射波反演中深层速度模型.偏移成像结果表明基于全波形反演的速度建模技术能有效改善火成岩下伏构造的成像精度,显示了全波形反演在常规陆上采集资料的应用潜力. 相似文献
5.
Oil and gas exploration gradually changes to the deep and complex areas. The quality of seismic data restricts the effective application of conventional time-frequency analysis technology, especially in the case of low signal-to-noise ratio. To address this problem, we propose a curvelet-based time-frequency analysis method, which is suitable for seismic data, and takes into account the lateral variation of seismic data. We first construct a kind of curvelet adapted to seismic data. By adjusting the rotation mode of the curvelet in the form of time skewing, the scale parameter can be directly related to the frequency of the seismic data. Therefore, the curvelet coefficients at different scales can reflect the time-frequency information of the seismic data. Then, the curvelet coefficients, which represent the dominant azimuthal pattern, are converted to the time-frequency domain. Since the curvelet transform is a kind of sparse representation for the signal, the screening process of the dominant coefficient masks most of the random noise, which enables the method to adapt for the low signal-to-noise ratio data. Results of synthetic and field data experiments using the proposed method demonstrate that it is a good approach to identify weak signals from strong noise in the time-frequency domain. 相似文献
6.
面波压制是地震数据处理中的一个重要问题. 常规的处理方法虽然能在一定程度上压制面波，但是在处理过程中只是单一的利用面波的一种特性,例如频率域滤波中利用面波与有效信号频率之间的差别，因此难以有效地压制面波. 利用Ridgelet变换可将原始地震记录拓展到（a,τ,p）三维空间，从而可以同时利用地震记录的视速度、时间和尺度域特性差别，实现有效信号与面波的分离. 文中通过理论合成记录及实际地震记录的算例，证实了基于Ridgelet变换的面波压制方法是有效且可行的. 相似文献
7.
8.
Ground roll attenuation using the S and x-f-k transforms 总被引：2，自引：0，他引：2
Ground roll, which is characterized by low frequency and high amplitude, is an old seismic data processing problem in land‐based seismic acquisition. Common techniques for ground roll attenuation are frequency filtering, f‐k or velocity filtering and a type of f‐k filtering based on the time‐offset windowed Fourier transform. These techniques assume that the seismic signal is stationary. In this study we utilized the S, x‐f‐k and t‐f‐k transforms as alternative methods to the Fourier transform. The S transform is a type of time‐frequency transform that provides frequency‐dependent resolution while maintaining a direct relationship with the Fourier spectrum. Application of a filter based on the S transform to land seismic shot records attenuates ground roll in a time‐frequency domain. The t‐f‐k and x‐f‐k transforms are approaches to localize the apparent velocity panel of a seismic record in time and offset domains, respectively. These transforms provide a convenient way to define offset or time‐varying reject zones on the separate f‐k panel at different offsets or times. 相似文献
9.
10.
The ground roll and body wave usually show significant differences in arrival time, frequency content, and polarization characteristics, and conventional polarization filters that operate in either the time or frequency domain cannot consider all these elements. Therefore, we have developed a time-frequency dependent polarization filter based on the S transform to attenuate the ground roll in seismic records. Our approach adopts the complex coefficients of the S transform of the multi-component seismic data to estimate the local polarization attributes and utilizes the estimated attributes to construct the filter function. In this study, we select the S transform to design this polarization filter because its scalable window length can ensure the same number of cycles of a Fourier sinusoid, thereby rendering more precise estimation of local polarization attributes. The results of applying our approach in synthetic and real data examples demonstrate that the proposed polarization filter can effectively attenuate the ground roll and successfully preserve the body wave. 相似文献
11.
Ground roll is an interference wave that severely degrades the signal-to-noise ratio of seismic data and affects its subsequent processing and interpretation. In this study, according to differences in morphological characteristics between ground roll and reflected waves, we use morphological component analysis based on two-dimensional dictionaries to separate ground roll and reflected waves. Because ground roll is characterized by low-frequency, low-velocity, and dispersion, we select two-dimensional undecimated discrete wavelet transform as a sparse representation dictionary of ground roll. Because of a strong local correlation of the reflected wave, we select two-dimensional local discrete cosine transform as the sparse representation dictionary of reflected waves. A sparse representation model of seismic data is constructed based on a two-dimensional joint dictionary then a block coordinate relaxation algorithm is used to solve the model and decompose seismic record into reflected wave part and ground roll part.The good effects for the synthetic seismic data and application of real seismic data indicate that when using the model, strong-energy ground roll is considerably suppressed and the waveform of the reflected wave is effectively protected. 相似文献
12.
在野外数据采集过程中,空间非均匀采样下的地震道缺失现象经常出现,为了不影响后续资料处理,必须进行高精度数据重建.然而大多数常规方法只能对空间均匀采样下的地震缺失道进行重建,而对于非均匀采样的地震数据则无能为力.为此本文在以往多尺度多方向二维曲波变换的基础上,首先引入非均匀快速傅里叶变换,建立均匀曲波系数与空间非均匀采样下地震缺失道数据之间的规则化反演算子,在L1最小范数约束下,使用线性Bregman方法进行反演计算得到均匀曲波系数,最后再进行均匀快速离散曲波反变换,从而形成基于非均匀曲波变换的高精度地震数据重建方法.该方法不仅可以重建非均匀带假频的缺失数据,而且具有较强的抗噪声能力,同时也可以将非均匀网格数据归为到任意指定的均匀采样网格.理论与实际数据的处理表明了该方法重建效果远优于非均匀傅里叶变换方法,可以有效地指导复杂地区数据采集设计及重建. 相似文献
13.
本文分析了Curvelet变换在地震数据处理中的优势及不足,提出了非二次幂Curvelet变换.主要有两点改进:(1)将经典Curvelet变换非自适应的二次幂多尺度多角度分解方式改进为基于地震数据特点的、自适应非二次幂可控多尺度多角度分解方式,可以更有效地反映地震信号的主要方向特征和频率特征;(2)在最粗尺度引入各向异性分析,实现了对低频信号的精细处理.本文通过处理合成记录和含有面波干扰的实际数据算例验证了非二次幂Curvelet变换在地震噪声压制中的有效性. 相似文献
14.
深地震反射原始单炮数据是非平稳的弱能量反射信号,信噪比较低.如何提高信噪比一直是深地震反射数据前处理中的一大难题.S变换是一种适用于分析非平稳信号的时频变换方法.同其他分析时变信号的方法相比,S变换的基本小波不必满足小波在时间域均值为零的容许性条件,它的时频分辨率与分析信号的频率有关,且其在时间域的积分可以得到傅里叶频谱,其反变换也简单.因此,S变换容易表示深地震反射信号复杂的时频特性.本文在S变换的基础上,利用软阈值滤波方法对深地震反射数据进行处理,实验结果表明,该方法有效地提高了信噪比,压制了有效频带范围内的混频干扰,突出了弱反射信号,使得波组信息更加丰富,有利于连续追踪有效反射波组和识别薄地层,特别是提高了深部Moho界面反射层位的分辨率,为深地震反射剖面后续处理和准确解释奠定了基础. 相似文献
15.
To improve the data quality of converted waves, and better identify and suppress the strong ground-roll interference in three-component (3C) seismic recordings on land, we present an adaptive polarization filtering method, which can effectively separate the groundroll interference by combining complex polarization and instantaneous polarization analysis. The ground roll noise is characterized by elliptical plane polarization, strong energy, low apparent velocity, and low frequency. After low-pass filtering of the 3C data input within a given time-window of the ground roll, the complex covariance matrix is decomposed using the sliding time window with overlapping data and length that depends on the dominant ground-roll frequency. The ground-roll model is established using the main eigenvectors, and the ground roll is detected and identified using the instantaneous polarization area attributes and average energy constraints of the ground-roll zone. Finally, the ground roll is subtracted. The threshold of the method is stable and easy to select, and offers good groundroll detection. The method is a robust polarization filtering method. Model calculations and actual data indicate that the method can effectively identify and attenuate ground roll while preserving the effective signals. 相似文献
16.
Gabor变换和S变换是常用的时频分析工具。根据测不准原理,它们的时频分解结果无法在时间域和频率域同时具有很高的分辨率。为了提高非平稳信号时频分解结果的分辨率,本文提出瞬时频率分布函数（IFDF）并利用它表达非平稳信号。当非平稳信号时频成分的分布满足测不准原理对信号可分辨的要求时,瞬时频率分布函数的支集和短时Fourier变换的小波脊支集是同一个集合。利用IFDF的该特征,本文提出一种迭代算法（Sparse-STFT）实现了信号的稀疏时频分解。该算法在每次迭代过程中利用残留信号的短时Fourier变换结果的脊支集更新信号的时频成分,每次迭代得到的时频成分的叠加结果即为最终的稀疏时频分解结果。文中的数值实验证明了Sparse-STFT可以有效地提高非平稳信号时频分解结果的分辨率。最后,本文将该方法应用于地震数据面波的压制中,取得了理想的处理结果。 相似文献
17.
Hua Zhang Su Diao Wei Chen Guangnan Huang Hongxing Li Min Bai 《Geophysical Prospecting》2019,67(5):1201-1218
Seismic data reconstruction, as a preconditioning process, is critical to the performance of subsequent data and imaging processing tasks. Often, seismic data are sparsely and non-uniformly sampled due to limitations of economic costs and field conditions. However, most reconstruction processing algorithms are designed for the ideal case of uniformly sampled data. In this paper, we propose the non-equispaced fast discrete curvelet transform-based three-dimensional reconstruction method that can handle and interpolate non-uniformly sampled data effectively along two spatial coordinates. In the procedure, the three-dimensional seismic data sets are organized in a sequence of two-dimensional time slices along the source–receiver domain. By introducing the two-dimensional non-equispaced fast Fourier transform in the conventional fast discrete curvelet transform, we formulate an L1 sparsity regularized problem to invert for the uniformly sampled curvelet coefficients from the non-uniformly sampled data. In order to improve the inversion algorithm efficiency, we employ the linearized Bregman method to solve the L1-norm minimization problem. Once the uniform curvelet coefficients are obtained, uniformly sampled three-dimensional seismic data can be reconstructed via the conventional inverse curvelet transform. The reconstructed results using both synthetic and real data demonstrate that the proposed method can reconstruct not only non-uniformly sampled and aliased data with missing traces, but also the subset of observed data on a non-uniform grid to a specified uniform grid along two spatial coordinates. Also, the results show that the simple linearized Bregman method is superior to the complex spectral projected gradient for L1 norm method in terms of reconstruction accuracy. 相似文献
18.
19.
在宽角反射/折射地震测深数据处理中,仍多用基于傅里叶变换的滤波方法和小波去噪方法。鉴于傅里叶方法对稳态信号很有效但对非稳态的地震信号效果不佳的状况以及小波不能同时具有正交性、紧支性、对称性,本文给出了基于多小波的去噪方法,多小波具有正交性、对称性、紧支性,克服了传统小波的缺陷。编写了多小波去噪方法的人机交互软件。该软件可以方便快捷地显示宽角反射/折射地震记录截面,进行多小波域的阈值去噪。实例计算结果表明,本文所述方法和编写的软件有效且可行。 相似文献
20.
Guangtan Huang Min Bai Qiang Zhao Wei Chen Yangkang Chen 《Geophysical Prospecting》2021,69(1):101-121
Erratic noise often has high amplitudes and a non‐Gaussian distribution. Least‐squares–based approaches therefore are not optimal. This can be handled better with non–least‐squares approaches, for example based on Huber norm which is computationally expensive. An alternative method has been published which involves transforming the data with erratic noise to pseudodata that have Gaussian distributed noise. It can then be attenuated using traditional least‐squares approaches. This alternative method has previously been used in combination with a curvelet transform in an iterative scheme. In this paper, we introduce a median‐filtering step in this iterative scheme. The median filter is applied following the slope direction of the seismic data to maximally preserve the energy of useful signals. The new method can suppress stronger erratic noise compared with the previous iterative method, and can better deal with random noise compared with the single‐step implementation of the median filter. We apply the proposed robust denoising algorithm to a synthetic dataset and two field data examples and demonstrate its advantages over three different noise attenuation algorithms. 相似文献