共查询到20条相似文献，搜索用时 171 毫秒
1.
The objective of this study was to determine the changing characteristics of soil surface roughness under different rainfall intensities and examine the interaction between soil surface roughness and different water erosion processes. Four artificial management practices (raking cropland, artificial hoeing, artificial digging, and contour tillage) were used according to the local agriculture customs of the Loess Plateau of China to simulate different types of soil surface roughness, using an additional smooth slope for comparison purposes. A total of 20 rainfall simulation experiments were conducted in five 1 m by 2 m boxes under two rainfall intensities (0.68 and 1.50 mm min?1) on a 15° slope. During splash erosion, soil surface roughness decreased in all treatments except raking cropland and smooth baseline under rainfall intensity of 0.68 mm min?1, while increasing for all treatments except smooth baseline under rainfall intensity of 1.50 mm min?1. During sheet erosion, soil surface roughness decreased for all treatments except hoeing cropland under rainfall intensity of 0.68 mm min?1. However, soil surface roughness increased for the artificial hoeing and raking cropland under rainfall intensity of 1.50 mm min?1. Soil surface roughness has a control effect on sheet erosion for different treatments under two rainfall intensities. For rill erosion, soil surface roughness increased for raking cropland and artificial hoeing treatments, and soil surface roughness decreased for artificial digging and the contour tillage treatments under two rainfall intensities. Under rainfall intensity of 0.68 mm min?1, the critical soil surface roughness was 0.706 cm for the resistance control of runoff and sediment yield. Under rainfall intensity of 1.50 mm min?1, the critical soil surface roughness was 1.633 cm for the resistance control of runoff, while the critical soil surface roughness was 0.706 cm for the resistance control of sediment yield. These findings have important implications for clarifying the erosive nature of soil surface roughness and harnessing sloped farmland. Copyright © 2013 John Wiley & Sons, Ltd. 相似文献
2.
Impact of subsurface rock fragments on runoff and interrill soil loss from cultivated soils 总被引：1，自引：0，他引：1
Field and laboratory studies have indicated that rock fragments in the topsoil may have a large impact on soil properties, soil quality, hydraulic, hydrological and erosion processes. In most studies, the rock fragments investigated still remain visible at the soil surface and only properties of these visible rock fragments are used for predicting runoff and soil loss. However, there are indications that rock fragments completely incorporated in the topsoil could also significantly influence the percolation and water distribution in stony soils and therefore, also infiltration, runoff and soil loss rates. Therefore, in this study interrill laboratory experiments with simulated rainfall for 60 min were conducted to assess the influence of subsurface rock fragments incorporated in a disturbed silt loam soil at different depths below the soil surface (i.e. 0.001, 0.01, 0.05 and 0.10 m), on infiltration, surface runoff and interrill erosion processes for small and large rock fragment sizes (i.e. mean diameter 0.04 and 0.20 m, respectively). Although only small differences in infiltration rate and runoff volume are observed between the soil without rock fragments (control) and the one with subsurface rock fragments, considerable differences in total interrill soil loss are observed between the control treatment and both contrasting rock fragments sizes. This is explained by a rapid increase in soil moisture in the areas above the rock fragments and therefore a decrease in topsoil cohesion compared with the control soil profile. The observed differences in runoff volume and interrill soil loss between the control plots and those with subsurface rock fragments is largest after a cumulative rainfall (Pcum) of 11 mm and progressively decreases with increasing Pcum. The results highlight the impacts and complexity of subsurface rock fragments on the production of runoff volume and soil loss and requires their inclusion in process‐based runoff and erosion models. Copyright © 2011 John Wiley & Sons, Ltd. 相似文献
3.
Starting from the basic erosion principles, an upland soil erosion model to predict soil loss by overland flow from individual storms on forested hillslopes can be derived in the form where Qs is total soil loss for a storm event, n is roughness coefficient, x is down slope distance, Kf is soil erodibility factor, S is slope, α is slope exponent and Q is runoff. Values of n and α are to be determined for different environments and are 0·58 and 2·1 for a mixed pine forest ecosystem. A significant correlation (r = 0·933, n = 96) fits between the observed and predicted values using this expression, and the model fitting is good. 相似文献
4.
Soil erosion in sloping cropland is a key water and soil conservation issue in the Loess Plateau region, China. How surface roughness influences soil detachment remains unclear due to the inconsistent results obtained from existing studies. The objectives of the present study were to evaluate the effects of tillage practices on soil detachment rate in sloping cropland and establish an accurate empirical model for the prediction of soil detachment rates. A series of movable bed experiments were conducted on sloping surfaces under three different tillage practices (manual dibbling, manual hoeing, and contour drilling), with a smooth surface (non-tillage) as a control. The research indicated that soil detachment rate significantly increased with roughness (p < 0.05) since the average soil detachment rate was the highest under the contour drilling treatment (6.762 g m−2 s−1), followed by manual hoeing (4.180 g m−2 s−1), and manual dibbling (3.334 g m−2 s−1); the lowest detachment rate was observed under the non-tillage treatment (3.214 g m−2 s−1). Slope gradient and unit discharge rate were positively correlated with soil detachment rate and proved to be more influential than soil surface roughness. Four composite hydraulic parameters were introduced to estimate soil detachment rate on tilled surfaces. Regression analyses revealed that stream power was the most effective predictor of soil detachment rate compared with unit length shear force, shear stress, and unit stream power. By integrating surface roughness as a variable, the detachment rate could be accurately described as a nonlinear function of stream power and surface roughness. The results of the present study indicate that tillage practice could influence soil loss on sloping cropland, considering the higher soil detachment rates under all tillage practices tested compared with non-tillage. The results are attributed mainly to concentrated flow caused by the high water storage levels on tilled surfaces, which could damage surface microtopography and, subsequently, the development of headcuts. 相似文献
5.
Edwin R.C. Baynes Dimitri Lague Philippe Steer Stéphane Bonnet Luc Illien 《地球表面变化过程与地形》2020,45(14):3714-3731
Sediment supply (Qs) is often overlooked in modelling studies of landscape evolution, despite sediment playing a key role in the physical processes that drive erosion and sedimentation in river channels. Here, we show the direct impact of the supply of coarse-grained, hard sediment on the geometry of bedrock channels from the Rangitikei River, New Zealand. Channels receiving a coarse bedload sediment supply are systematically (up to an order of magnitude) wider than channels with no bedload sediment input for a given discharge. We also present physical model experiments of a bedrock river channel with a fixed water discharge (1.5 l min−1) under different Qs (between 0 and 20 g l−1) that allow the quantification of the role of sediment in setting the width and slope of channels and the distribution of shear stress within channels. The addition of bedload sediment increases the width, slope and width-to-depth ratio of the channels, and increasing sediment loads promote emerging complexity in channel morphology and shear stress distributions. Channels with low Qs are characterized by simple in-channel morphologies with a uniform distribution of shear stress within the channel while channels with high Qs are characterized by dynamic channels with multiple active threads and a non-uniform distribution of shear stress. We compare bedrock channel geometries from the Rangitikei and the experiments to alluvial channels and demonstrate that the behaviour is similar, with a transition from single-thread and uniform channels to multiple threads occurring when bedload sediment is present. In the experimental bedrock channels, this threshold Qs is when the input sediment supply exceeds the transport capacity of the channel. Caution is required when using the channel geometry to reconstruct past environmental conditions or to invert for tectonic uplift rates, because multiple configurations of channel geometry can exist for a given discharge, solely due to input Qs. © 2020 The Authors. Earth Surface Processes and Landforms published by John Wiley & Sons Ltd 相似文献
6.
IntroductionVelocityanditsattenuationinformationiscloselylinkedwiththeoreticalstudiesonthegroundmovementsduringearthquake.Therecentstudy(Malagnini,1996)showedthatthevelocitystructureofshearwaveinshallowsoilabove30mplaysanimpoftantroletoestimatestfonggroundmotionofsite.However,itishardtopreciselymeasurethesoilstructuresanddynamiccharacteristics.First,theloosesoilabsorbstheseismicwaveswithhighfrequencies;Second,theeffectsoffocusinganddispersioncausedbylocallyinhomogeneoussitecannotbeneglectedin… 相似文献
7.
This paper investigates the dynamics of soil armouring as a result of fluvial erosion for a non‐cohesive sandy gravel spoil from the Ranger Mine, Australia, and a cohesive silt loam spoil from the Northparkes Mine, Australia, using a model for hillslope soil armouring. These long term predictions concentrate on the temporal and spatial changes of the spoil grading and erosion over 100–200 years for the flat cap regions (1–2%) and steep batter edges (10–30%) typically encountered on waste rock dumps. The existence of a significant rock fragment fraction in the Ranger spoil means that it armours readily, while Northparkes does not. For Ranger the waste rock showed reductions in (1) cumulative erosion of up to 81% from that obtained by extrapolating the initial erosion rate out 100 years and (2) the erosion/year by more than 10‐fold. For Northparkes reductions were less marked, with the maximum reduction in erosion/year being 37% after 200 years. For Ranger the reductions were greatest and fastest for intermediate gradient hillslopes. For the steepest hillslopes the armouring decreased because the flow shear stresses were large enough to mobilize all material in the armour layer. Model uncertainty was assessed with probabilistic confidence limits demonstrating that these erodibility reductions were statistically significant. A commonly used hillslope erosion model (sediment flux = β1 discharge m1 slope n1) was fitted to these predictions. The erodibility, β1, and m1 decreased with time, which was consistent with our physical intuition about armouring. At Ranger the parameter m1 asymptoted to 1·5–1·6 while at Northparkes it asymptoted to 1·2–1·3. At Ranger transient spatial trends in armouring led to a short term (50–200 years in the future) reduction in n1, to below zero under certain circumstances, recovering to an asymptote of about 0·5–1. At Northparkes n1 asymptoted to about 0·6, with no negative transients predicted. The m1 and n1 parameters predicted for Ranger were shown to be consistent with field data from a 10‐year‐old armoured hillslope and consistent with published relationships between erodibility and rock content for natural hillslopes. Copyright © 2007 John Wiley & Sons, Ltd. 相似文献
8.
Better knowledge regarding internal soil moisture and piezometric responses in the process of rainfall-induced shallow slope failures is the key to an effective prediction of the landslide and/or debris flow initiation. To this end, internal soil moisture and piezometric response of 0.7-m-deep, 1.5-m-wide, 1.7-m-high, and 3.94-m-long semi-infinite sandy slopes rested on a bi-linear impermeable bedrock were explored using a chute test facility with artificial rainfall applications. The internal response time defined by the inflection point of the soil moisture and piezometric response curves obtained along the soil–bedrock interface were closely related to some critical failure states, such as the slope toe failure and extensive slope failures. It was also found that the response times obtained at the point of abrupt bedrock slope decrease can be used as indicators for the initiation of rainfall-induced shallow slope failures. An investigation of spatial distributions of soil water content, ω (or degrees of saturation, Sr), in the slope at critical failure states shows that the 0.2 m – below – surface zone remains unsaturated with Sr 40–60%, regardless of their distances from the toe and the rainfall intensity. Non-uniform distributions of ω (or Sr) along the soil–bedrock interface at critical failure states were always associated with near-saturation states (Sr 80–100%) around the point of bedrock slope change or around the transient ‘toe’ upstream of the slumped mass induced by the retrogressive failure of the slope. These observations suggest the important role of the interflow along the soil–bedrock interface and the high soil water content (or high porewater pressure) around the point of bedrock slope deflection in the rainfall-induced failure of sandy slopes consisting of shallow impermeable bedrocks. The present study proposes an ‘internal response time’ criterion to substantiate the prediction of rainfall-induced shallow slope failures. It is believed that the ‘internal response time’ reflects the overall characteristics of a slope under rainfall infiltration and can be as useful as the conventional meteorology-based threshold times. The ‘internal response time’ theory can be generalized via numerical modeling of slope hydrology, slope geology and slope stability in the future. 相似文献
9.
P.I.A. Kinnell 《水文研究》2014,28(5):2761-2771
Recently, a USDA Curve Number‐based method for obtaining estimates of event runoff has been developed for use in enhancing the capacity of Revised Universal Soil Loss Equation (RUSLE2) to deal with runoff‐driven phenomena. However, RUSLE2 still uses the EI30 index as the basis for determining the erosivity of the rainfall for sets of runoff producing storms at a location even though the product of the runoff ratio (QR) and EI30 index is better at prediction event erosion when runoff is known or predicted well. This paper reports the results of applying the QREI30 index using data available from tables within RUSLE2 to predict storm event soil losses from bare fallow areas and areas with continuous corn at Holly Springs, MS, and Morris, MN. In RUSLE2, all rainfall during a calendar year is considered to detach soil material that is flushed from the area if and when runoff occurs. However, the QREI30 index is calculated using the EI30 value for the amount of rain in the storm that produces runoff. Consequently, changes were made to the timing of events during the calendar year in order to meet the criteria for using the QREI30 index. As a general rule, the peak event soil loss produced using the QREI30 index were higher than produced by RUSLE2, and the peak event soil loss for the bare fallow occurred later than for the continuous corn. The results of the work reported here show that the QREI30 index may be used to model event erosion produced by a set of storms within RUSLE2 provided that the appropriate mathematical rules upon which the USLE was developed are adhered to. Copyright © 2013 John Wiley & Sons, Ltd. 相似文献
10.
Spatial variation in soil resistance to flowing water erosion along a regional transect in the Loess Plateau 总被引：4，自引：0，他引：4 
下载免费PDF全文
下载免费PDF全文 The factors influencing soil erosion may vary with scale. It remains unclear whether the spatial variation in soil erosion resistance is controlled by regional variables (e.g. precipitation, temperature, and vegetation zone) or by local specific variables (e.g. soil properties, root traits, land use, and farming operations) when the study area enlarges from a hillslope or catchment to the regional scale. This study was performed to quantify the spatial variations in soil erosion resistance to flowing water under three typical land uses along a regional transect on the Loess Plateau and to identify whether regional or local specific variables are responsible for these changes. The results indicated that the measured soil detachment capacities (Dc) of cropland exhibited an irregular trend along the regional transect. The Dc of grassland increased with mean annual precipitation, except for two sites (Yijun and Erdos). The measured Dc of woodland displayed an inverted ‘U’ shape. The changes in rill erodibility (Kr) of three land uses were similar to Dc, whereas no distinguishable trend was found for critical shear stress (τc). No significant correlation was detected between Dc, Kr and τc, and the regional variables. The spatial variation in soil erosion resistance could be explained reasonably by changes in soil properties, root traits, land use, and farming operations, rather than regional variables. The adjustment coefficient of Kr for grassland and woodland could be well simulated by soil cohesion and root mass density (R2 = 0.70, P < 0.01), and the adjustment coefficient of critical shear stress could be estimated with aggregate stability (R2 = 0.57, P < 0.01). The results are helpful for quantifying the spatial variation in soil detachment processes by overland flow and to develop process‐based erosion model at a regional scale. Copyright © 2015 John Wiley & Sons, Ltd. 相似文献
11.
Huiru Li Xueyong Zou Mengcui Zhang Liqiang Kang Chunlai Zhang Hong Cheng Xiaoxu Wu 《地球表面变化过程与地形》2021,46(5):907-920
A commonly used measure to prevent soil wind erosion is to cover the surface with gravel. Gravel can inhibit soil erosion by covering the surface directly, changing the airflow field near the surface and sharing the shear stress of wind. Similar to other roughness elements, the protective effect of gravel on soil is usually expressed in terms of the ratio of the shear stress on the exposed soil surface to the total shear stress on the rough surface due to wind, i.e. through a shear-stress partitioning model. However, the existing shear-stress partitioning models, represented by Raupach's model (RM93), are only applicable when the lateral coverage of the roughness elements, λ < 0.10, and the applicability of the models to flat-shaped roughness elements is unclear. The purpose of this study is to verify the applicability of RM93 for dense and flat-shaped gravel roughness elements by using shear-stress data from wind-tunnel measurements pertaining to roughness elements with different densities (0.013 ≤ λ ≤ 0.318) and flat shapes (height-to-width ratios in the range 0.20 ≤ H/W ≤ 0.63), and to modify RM93 to enhance its predictive ability. The results indicate that RM93 cannot accurately predict the shear-stress partitioning for surfaces covered by densely distributed and flat-shaped gravel roughness elements. This phenomenon occurs because, when roughness elements are distributed densely or are flat-shaped, the proportion of the shear stress on the top surface of the roughness elements (τc) to the total shear stress (τ) is large; in this case, τc plays a dominant role and serves as an essential component in the shear-stress partitioning model. Consequently, RM93 is modified by incorporating τc into the calculation of τ. Under conditions of λ < 0.32 and H/W > 0.2, the modified RM93 can yield satisfactory predictions regarding the shear-stress partitioning. 相似文献
12.
Abstract Proper agricultural land management strategies improve soil structural properties, thereby reducing soil loss by water erosion. This study was conducted to estimate soil losses from plots of different agricultural land management using the Water Erosion Prediction Project (WEPP) (95.7) model. The study took place in a semiarid region in Kenya. The mean annual rainfall was 694 mm. The WEPP (95.7) model was initially used to estimate total sediment loading from the catchment into a reservoir. The estimate was about 2871 t corresponding to an average sedimentation rate of 1063 t km?2 year?1, which was about 76% of the measured total sediment inflow into the reservoir. Soil losses were estimated within 10 plots on the catchment of different sizes and slopes with the following treatments: conventional tillage (hand hoeing) with maize and soybean intercropping (HOCOBE); conservation tillage (disc plough) with maize and soybean intercropping (COBEAN); conservation tillage with only maize cultivation (CNTCORN); and conservation tillage with only soybean cultivation (CNTBEAN). The soil loss reduction of COBEAN, CNTCORN and CNTBEAN relative to HOCOBE ranged between 27–47%, 16–29% and 12–25%, respectively, depending on the size and slope of the plot. In general, conservation tillage reduced soil loss relative to conventional tillage. However, with conservation tillage, the single cropping system resulted in greater soil loss than the intercropping system. In the case of single cropping with conservation tillage, the soil loss reduction for maize ranged between 4 and 9%, relative to soybean. Overall, the study showed that there would be a significant reduction of soil losses from plots if conservation tillage with an intercropping system (maize and soybean) were to be adopted on agricultural lands in semiarid regions. 相似文献
13.
Landscape‐scale variation in rock fragments on soil‐mantled hillslopes is poorly understood, despite the potential importance of rock fragments in soil weathering and coarse sediment supply to river networks. We explored the utility of soil survey databases for data mining, with the goals of identifying landscape‐scale patterns in the abundance and size distribution of rock fragments (diameter D > 2 mm) and potential controls on grain size production. We focus on data from three regions: the Hawaiian Islands, and the Sierra Nevada and Cascade Mountains, where elevation transects span a range of environmental conditions. We selected pedons from pits dug on hillslopes with active soil production and transport. For the 27 pedons selected, we constructed depth‐averaged grain size distributions and calculated the mass fraction of rock fragments (FRF) and the median rock fragment grain size (D50RF). We also categorized as bimodal, size distributions with a clear ‘breakpoint’ between fine and coarse modes. Several strong patterns emerge from the data. We find rock fragments in 85% of the pedons, primarily in distinct coarse modes within bimodal size distributions. Values of FRF and D50RF are strongly correlated, although the best‐fit power law scaling between FRF and D50RF differs between the warmer Hawaiian, and colder Sierra Nevada and Cascade Mountain sites. We also find a regional contrast in the variation in FRF with elevation; FRF declines with elevation in Hawaii, but increases in the mainland sites. Although this contrast could be an artifact of variable lithology, precipitation may influence many patterns in the data. Lower mean‐annual precipitation correlates with higher FRF, dominantly bimodal distributions and surface enrichment in the vertical distribution of rock fragments. These observations may be useful in refining models of coarse sediment supply to rivers, and suggest opportunities for future work to test mechanistic hypotheses for rock fragment production on soil‐mantled hillslopes. Copyright © 2011 John Wiley & Sons, Ltd. 相似文献
14.
The effect of conservation tillage on runoff erosivity and soil erodibility during concentrated flow
Crop residues in conservation tillage systems are known to cause both a reduction in the erosive runoff power and an increase in the topsoil erosion resistance. In this study, the relative importance of both mechanisms in reducing soil loss by concentrated flow erosion is examined. Therefore, a method to calculate the effective flow shear stress responsible for soil detachment in the presence of a residue cover is applied. The determination of effective flow shear stress is based on the recalculation of the hydraulic radius for residue treatments. The method was tested in a laboratory flume by comparing soil detachment rates of identical pairs of soil samples that only differ in the presence or absence of crop residues. This shear stress partitioning approach and a soil detachment correction were then applied to a dataset of soil detachment measurements on undisturbed topsoil samples from a no‐till field plot on a loess‐derived soil, sampled during one growing season. Results indicate that only a small fraction (10% on average) of the difference in soil detachment rate between conventional and conservation tillage can be attributed to the dissipation of shear forces on the residues. The remaining decrease in soil detachment during concentrated runoff after a two‐year application of conservation tillage can be explained by the increased dry bulk density and root and crop residue content in the topsoil that reduces soil erodibility. After correcting for the presence of residues, the temporal variability in soil detachment rates (Dr) during concentrated flow for a given flow shear stress (τ) for both treatments can be predicted fairly well (R2 = 0·87) from dry soil bulk density (DBD, representing consolidation effects), soil moisture content (SMC, representing antecedent rainfall conditions), the dry mass of organic material (OM, representing root growth and residue decomposition) and saturated soil shear strength σs, sat using an equation of the form: This study is the first to show that the effect of conservation tillage on soil detachment rates is a result of soil property modifications affecting soil erodibility, rather than a result of the surface residue decreasing flow erosivity. Copyright © 2007 John Wiley & Sons, Ltd. 相似文献
15.
Thresholds and relations for soil‐hydraulic and soil‐physical properties as a function of burn severity 4 years after the 2011 Las Conchas Fire,New Mexico,USA 下载免费PDF全文
下载免费PDF全文 Wildfire effects on soil‐physical and ‐hydraulic properties as a function of burn severity are poorly characterized, especially several years after wildfire. A stratified random sampling approach was used in 2015 to sample seven sites representing a spectrum of remotely sensed burn severity in the area impacted by the 2011 Las Conchas Fire in New Mexico, USA. Replicate samples from each site were analysed in the laboratory. Linear and linear indicator regression were used to assess thresholds in soil‐physical and ‐hydraulic properties and functional relations with remotely sensed burn severity. Significant thresholds were present for initial soil‐water content (θi) at 0–6 cm depth between the change in the Normalized Burn Ratio (dNBR) equal to 618–802, for bulk density (ρb) at 3–6 cm between dNBR equal to 416–533, for gravel fraction at 0–1 cm between dNBR equal to 416–533, for fines (the silt + clay fraction) at 0–1 cm for dNBR equal to 416–533, and for fines at 3–6 cm for dNBR equal to 293–416. Significant linear relations with dNBR were present between ρb at 0–1 cm, loss on ignition (LOI) at 0–1 cm, gravel fraction at 0–1 cm, and the large organic fraction at 1–3 cm. No thresholds or effects on soil‐hydraulic properties of field‐saturated hydraulic conductivity or sorptivity were observed. These results suggest that ρb and LOI at 0–1 cm have residual direct impacts from the wildfire heat impulse. The θi threshold is most likely from delayed groundcover/vegetation recovery that increases evaporation at the highest burn severity sites. Gravel and silt + clay thresholds at 0–1 cm at the transition to high burn severity suggest surface gravel lag development from hydraulic erosion. Thresholds in ρb from 3 to 6 cm and in silt + clay fraction from 3 to 6 cm appear to be the result of soil variability between sites rather than wildfire impacts. This work suggests that gravel‐rich soils may have increased resilience to sustained surface runoff generation and erosion following wildfire, with implications for assessments of postwildfire hydrologic and erosion recovery potential. 相似文献
16.
P. I. A. Kinnell 《水文研究》2007,21(20):2681-2689
Despite revisions and refinements, the Revised Universal Soil Loss Equation (RUSLE), which is the revised version of the Universal Soil Loss Equation (USLE), over predicts small annual soil losses and under predicts large annual soil losses. To some large extent, this results from the equation over estimating small event soil losses and under estimating large event soil losses. Replacing the USLE/RUSLE event erosivity index (EI30) by the product of EI30 and the runoff ratio (QR) significantly reduces the errors in estimating event erosion when runoff is measured, but the USLE‐M, the USLE variant that uses the QREI30 index, requires crop and support practice factors that differ from those used in the RUSLE. The theory which enables the QREI30 index to be used in association with the RUSLE crop and support practice factors is presented. In addition, the USLE/RUSLE approach was developed for conditions where runoff is produced uniformly over a hill slope. A runoff dependent slope length factor that takes account of runoff variations over a hill slope is presented and demonstrated for the situation where runoff from a low runoff producing area passes onto an area where runoff is produced more readily. Copyright © 2007 John Wiley & Sons, Ltd. 相似文献
17.
Effects of rock fragment cover on hydrological processes under rainfall simulation in a semi‐arid region of China 下载免费PDF全文
下载免费PDF全文 Rock fragment cover has long been an important agricultural crop production technique on the Loess Plateau, China. Although this approach plays an important role in controlling hydrological processes and preventing soil erosion, inconsistent results have been recovered in this field. In this study, we investigated the effects of rock fragment cover on infiltration, run‐off, soil erosion, and hydraulic parameters using rainfall simulation in the field in a semi‐arid region of China. Two field plots encompassing 6 rock fragment coverages (0%, 10%, 20%, 25%, 30%, and 40%), as well as 2 rock fragment positions and sizes were exposed to rainfall at a particular intensity (60 mm h?1). The results of this study showed that increasing the rock fragment coverage with rock fragments resting on the soil surface increased infiltration but decreased run‐off generation and sediment yield. A contrasting result was found, however, when rock fragments were partially embedded into the soil surface; in this case, a positive relationship between rock fragment coverage and run‐off rate as well as a nonmonotonic relationship with respect to soil loss rate was recovered. The size of rock fragments also exerted a positive effect on run‐off generation and sediment yield but had a negative effect on infiltration. At the same time, both mean flow velocity and Froude number decreased with increasing rock fragment coverage regardless of rock fragment position and size, whereas both Manning roughness and Darcy–Weisbach friction factor were positively correlated. Results show that stream power is the most sensitive hydraulic parameter affecting soil loss. Combined with variance analysis, we concluded that the order of significance of rock fragment cover variables was position followed by coverage and then size. We also quantitatively incorporated the effects of rock fragment cover on soil loss via the C and K factors in the Revised Universal Soil Loss Equation. Overall, this study will enable the development of more accurate modelling approaches and lead to a better understanding of hydrological processes under rock fragment cover conditions. 相似文献
18.
Methods for predicting unit plot soil loss for the ‘Sparacia’ Sicilian (Southern Italy) site were developed using 316 simultaneous measurements of runoff and soil loss from individual bare plots varying in length from 11 to 44 m. The event unit plot soil loss was directly proportional to an erosivity index equal to (QREI30)1·47, being QREI30 the runoff ratio (QR) times the single storm erosion index (EI30). The developed relationship represents a modified version of the USLE‐M, and therefore it was named USLE‐MM. By the USLE‐MM, a constant erodibility coefficient was deduced for plots of different lengths, suggesting that in this case the calculated erodibility factor is representative of an intrinsic soil property. Testing the USLE‐M and USLE‐MM schemes for other soils and developing simple procedures for estimating the plot runoff ratio has practical importance to develop a simple method to predict soil loss from bare plots at the erosive event temporal scale. Copyright © 2009 John Wiley & Sons, Ltd. 相似文献
19.
Tamarah Rosellen King Mark Quigley Dan Clark Albert Zondervan Jan-Hendrik May Abaz Alimanovic 《地球表面变化过程与地形》2021,46(7):1238-1256
The 20 May 2016 MW 6.1 Petermann earthquake in central Australia generated a 21 km surface rupture with 0.1 to 1 m vertical displacements across a low-relief landscape. No paleo-scarps or potentially analogous topographic features are evident in pre-earthquake Worldview-1 and Worldview-2 satellite data. Two excavations across the surface rupture expose near-surface fault geometry and mixed aeolian-sheetwash sediment faulted only in the 2016 earthquake. A 10.6 ± 0.4 ka optically stimulated luminescence (OSL) age of sheetwash sediment provides a minimum estimate for the period of quiescence prior to 2016 rupture. Seven cosmogenic beryllium-10 (10Be) bedrock erosion rates are derived for samples < 5 km distance from the surface rupture on the hanging-wall and foot-wall, and three from samples 19 to 50 km from the surface rupture. No distinction is found between fault proximal rates (1.3 ± 0.1 to 2.6 ± 0.2 m Myr−1) and distal samples (1.4 ± 0.1 to 2.3 ± 0.2 m Myr−1). The thickness of rock fragments (2–5 cm) coseismically displaced in the Petermann earthquake perturbs the steady-state bedrock erosion rate by only 1 to 3%, less than the erosion rate uncertainty estimated for each sample (7–12%). Using 10Be erosion rates and scarp height measurements we estimate approximately 0.5 to 1 Myr of differential erosion is required to return to pre-earthquake topography. By inference any pre-2016 fault-related topography likely required a similar time for removal. We conclude that the Petermann earthquake was the first on this fault in the last ca. 0.5–1 Myr. Extrapolating single nuclide erosion rates across this timescale introduces large uncertainties, and we cannot resolve whether 2016 represents the first ever surface rupture on this fault, or a > 1 Myr interseismic period. Either option reinforces the importance of including distributed earthquake sources in fault displacement and seismic hazard analyses. 相似文献
20.
Monitoring gravel augmentation in a large regulated river and implications for process‐based restoration 下载免费PDF全文
下载免费PDF全文 Fanny Arnaud Hervé Piégay David Béal Pierre Collery Lise Vaudor Anne‐Julia Rollet 《地球表面变化过程与地形》2017,42(13):2147-2166
The artificial gravel augmentation of river channels is increasingly being used to mitigate the adverse effects of river regulation and sediment starvation. A systematic framework for designing and assessing such gravel augmentations is still lacking, notably on large rivers. Monitoring is required to quantify the movement of augmented gravel, measure bedform changes, assess potential habitat enhancement, and reduce the uncertainty in sediment management. Here we present the results of an experiment conducted in the Rhine River (French and German border). In 2010, 23 000 m3 of sediments (approximately the mean annual bedload transport capacity) were supplied in a by‐passed reach downstream of the Kembs dam to test the feasibility of enhancing sediment transport and bedform changes. A 620‐m‐long and 12‐m‐wide gravel deposit was created 8 km downstream from the dam. Monitoring included topo‐bathymetric surveys, radio‐frequency particle tracking using passive integrated transponder (PIT) tags, bed grain size measurement, and airborne imagery. Six surveys performed since 2009 have been described (before and after gravel augmentation, and after Q2 and Q15 floods). The key findings are that (i) the augmented gravel was partially dispersed by the first flood event of December 2010 (Q1); (ii) PIT tags were found up to 3200 m downstream of the gravel augmentation site after four years, but the effects of gravel augmentation could not be clearly distinguished from the effects of floods and internal remobilization on more than 3500 m downstream; (iii) linear and log‐linear relationships linking bedload transport, particle mobility, and grain size were established; and (iv) combined bathymetry and PIT tag surveys were useful for evaluating potential environmental risks and the first morpho‐ecological responses. This confirmed the complementary nature of such techniques in the monitoring of gravel augmentation in large rivers. Copyright © 2017 John Wiley & Sons, Ltd. 相似文献