共查询到18条相似文献，搜索用时 453 毫秒
1.
近年来，随着横波可控震源技术的发展，国内外已经实现了纯横波地震勘探.相较于地震纵波，地震横波对横波阻抗、横波速度尤其是各向异性参数变化更为敏感，因此地震横波能够用来更好地估算上述地层参数.VTI(具有垂直对称轴的横向各向同性)是地层介质中广泛存在的一种各向异性形式，对振幅随偏移距变化(AVO)影响显著.本文提出了一种改进的VTI介质SH-SH波反射系数近似公式，新公式具有较高的精度且仅包含两项待求参数：横波阻抗和水平横波(SH波)速度.基于新方程建立了VTI介质SH-SH波反演方法，该方法相比VTI介质的PP波反演不确定性明显下降，同时降低了常规PP波各向异性反演对大角度数据的要求.为了获得独立的横波各向异性参数，进一步地提出了一种基于岩石物理关系的横波各向异性参数估算方法.合成地震数据测试和柴达木盆地九分量地震勘探实际地震数据应用结果表明，新方法能够准确地预测地层的横波阻抗、水平横波(SH波)速度、各向异性参数，为各向异性地层的岩性解释和油气储层预测提供了可靠的解决方案，从而深化了横波地震勘探的应用潜力. 相似文献
2.
3.
弱各向异性介质中P-SV波弹性阻抗与流体识别因子(英文) 总被引：4，自引：0，他引：4
基于Petr Jilek正交各向异性介质中的P-SV波反射系数精确公式,通过近似得到VTI和HTI介质中的P-SV波近似公式,同时结合Kenneth横波弹性阻抗原理,推导建立了VTI和HTI介质中P-SV波的弹性阻抗近似公式;在此基础上构建了弱各向异性介质中的流体识别因子公式,通过理论模型对Castagna和Smith的岩性组合进行了识别;最后详细分析了各向异性参数的取值对P-SV波弹性阻抗及识别因子产生的影响及变化趋势。 相似文献
4.
高角度缝隙充填的碳酸盐岩储层可以等效为具有水平对称轴的横向各向同性介质.本文提出了适用于裂缝型碳酸盐岩的岩石物理模型构建流程,重点介绍了在碳酸盐岩各向同性背景中,综合利用微小裂隙模型和线性滑动模型添加缝隙系统,并分析了当缝隙充填不同流体时,各向异性参数随纵横波速比的变化特征.同时本文讨论了裂缝密度和缝隙充填流体对地震反射系数的影响,推导了不同类型流体充填时储层反射系数与裂缝密度的近似关系式,阐述了各向异性流体替换理论,最终实现饱含流体碳酸盐岩裂缝储层的纵横波速度和各向异性参数的估测.选取某碳酸盐岩工区A井对该方法进行试算,结果表明基于碳酸盐岩裂缝岩石物理模型估算的纵横波速度值与测井值吻合较好,而且估测所得的各向异性参数值也能够较好地反映出裂缝储层位置. 相似文献
5.
主要讨论了应力变化如何影响各向异性介质中波速度的问题。推导了一般各向异性介质在初始应力下的Christoffel方程,得到介质中3种波的相速度和初始应力的关系表达式;通过实验数据验证了单轴应力能够诱导各向异性,当施加单轴应力时,速度在沿应力的方向增加最大,在垂直应力的方向增加最小,实验结果与理论推导一致;用Christoffel方程的数值解模拟在3种对称情况下的弹性各向异性介质中初始应力对波速度的影响。数值结果表明:初始应力对各向异性介质中波传播速度的影响,随着各向异性强度的增加而增大,而且速度越慢,影响越大。 相似文献
6.
相速度和偏振方向是研究地震波传播规律和描述介质特性的重要参数,在理论研究和实际应用中有重要作用.本文假定倾斜横向各向同性(TTI)介质对称轴位于观测坐标系XOZ面内,在此观测坐标系下直接推导了TTI介质弹性波相速度和偏振方向的解析表达式,再进一步利用Thomsen弱各向异性理论,推导了弱各向异性近似条件下弹性波相速度以及qP波和qSV波偏振方向表达式.理论分析和数值试例表明,在相速度方面,随着各向异性介质参数改变,qP波和qSH波速度变化较为平缓,qSV波速度变化较为剧烈.弹性波相速度近似式误差均较小,能较好地近似精确相速度.在偏振方向方面,SH波偏振方向只是传播方向和对称轴倾角的函数,而与各向异性参数无关,SH波偏振方向既垂直于传播方向,又垂直于TTI介质对称轴方向.除特定方向外,qP波和qSV波的偏振方向与传播方向均成一定角度,并且随TTI介质对称轴倾角的改变而改变;在精确和近似情况下,qP波和qSV波的偏振方向始终垂直;在精度允许范围内,偏振方向的弱各向异性近似式与理论解析式吻合较好. 相似文献
7.
油气勘探开发实践证明,裂缝常常是油气藏存储的空间或运移的通道,因此,裂缝各向异性介质中地震波场的研究越来越倍受关注,国内外很多岩石物理学者、地球物理专家等对裂缝信息的描述提出了很多理论认识与方法技术.本文根据Eshelby-Cheng各向异性裂缝介质模型理论,求取各向异性裂缝介质的弹性参数,并建立Eshelby-Cheng各向异性裂缝介质的波动方程,利用时间错格伪谱法对含流体裂缝介质进行数值模拟,模拟结果表明,采用时间错格伪谱法能有效解决各向异性介质的波场传播,利用时间错格有限差分算子替代普通的差分算子来求解时间导数,利用快速傅氏变换求解空间导数,大大提高了正演模拟的计算精度与计算效率.并且与各向同性介质相比,地震波在含流体裂缝各向异性介质中的传播要复杂得多,各向同性介质层中的波是纯的,其横波不会发生分裂,而在各向异性介质层中,横波将发生分裂. 相似文献
8.
随着地震工程和能源地震勘探的深入发展,人们所遇到的地下介质愈来愈复杂．常规的各向异性介质理论或双相各向同性介质理论难以精确描述含流体的各向异性介质,如裂缝性气藏、含水页岩等．本文以Biot双相各向异性介质理论为基础,利用弹性平面波方程,推导出了任意双相各向异性介质中弹性波的Christoffel方程．根据Christoffel方程,计算并分析了频率对双相横向各向同性介质中弹性波的相速度、衰减、双相振幅比和偏振特征的影响．结果表明,在4类波(快纵波、慢纵波、快横波和慢横波)中,频率对慢纵波影响最大;当耗散很大时,快纵波、快横波和慢横波的流固相振幅比值近似为1．对偏振特征分析的结果表明,在双相各向异性介质中,弹性波的固相位移偏振方向与流相位移偏振方向将不再保持同向或反向,而是呈不同大小的夹角． 相似文献
9.
10.
本文发展了建立在地层参考状态为各向同性介质假定下的现行井孔声弹性理论,就井外为横向各向同性面与井轴垂直的、具有9个独立三阶弹性模量的横向各向同性介质(VTI井况),水平面内受双轴应力作用下给出了一个简洁的与井内压力、应力差、应力和以及多极源偏振方位角有关的井孔弯曲波声弹公式,并且导出了平面纵、横波速度的声弹公式.数值考察了弯曲波速度之改变量的灵敏系数随频率的变化、受井外水平双轴应力作用时两种偏振的偶极弯曲波频散曲线以及对应不同方位径向偏振的横波速度.研究结果表明弯曲波声弹公式与5个二阶弹性系数以及7个独立的三阶弹性模量有关;而且由内压引起的井孔弯曲波声弹性公式中的三阶弹性模量仅与6个独立的弹性模量有关.横向各向同性介质井孔弯曲波速度的交叉现象仍是判断地应力存在的标志;一个重要的认识是受双轴应力作用的弯曲波速度变化在低频区主要与c144和c155两个三阶弹性模量有关,而且此认识与径向偏振的平面横波一致.在缺乏足够实验条件情况下,对VTI情况,以c144,c155和c123三个独立的量进行测量,然后可暂不考虑三阶弹性模量的各向异性,建立简化的应力反演公式.反之,如果已知地层的地应力信息,由简化的声弹公式可以反演三阶弹性模量c144,c155和c123. 相似文献
11.
This study investigates the reflection and transmission of plane SH-waves in two semi-infinite anisotropic magnetoelastic media. The lower half-space is considered as initially stressed and inhomogeneous. The density of lower half-space is taken exponentially varying with depth. The solutions for half-spaces are obtained analytically. The expressions for reflection and transmission coefficient are obtained in the closed form subject to continuity conditions at the interfaces of anisotropic magnetoelastic half-spaces and the Snell’s law. It is found that these coefficients depend on the initial stress, inhomogeneity parameter, the magnetoelastic coupling parameter, and the angle at which wave crosses the magnetic field of the half-spaces. Numerical computations are performed for these coefficients for a specific model of two different anisotropic magnetoelastic half-spaces. The numerical results are illustrated by the graph of reflection and transmission coefficient versus the angle of incidence. In general, as the initial stress increases the reflection and transmission coefficient increases, the affect is more prominent for more than 10 GPa. Inhomogeneity in the density of the material also increases the reflection and transmission coefficient. The anisotropic magnetoelastic parameter and the angle at which the wave crosses the magnetic field for both the half-spaces have a quite significant effect on the reflection and transmission coefficient. 相似文献
12.
基于地震波反射系数近似公式的叠前反演是油气勘探的重要工具.本文在已有研究的基础上,推导了一个改进的射线参数域地震纵波反射系数近似方程.该方程建立了地震纵波反射系数与纵波阻抗和横波阻抗的非线性关系,在中、小角度的范围内较现有的反射系数线性近似公式精度更高.另外,由于该方程仅包含纵波和横波阻抗反射系数项,因此基于新方程的反演能够有效地降低同步反演纵波速度、横波速度、密度三个参数的不适定性.在此基础上,结合广义线性反演法(GLI)理论和贝叶斯理论,相应地发展了一种叠前地震同步反演方法.模型测试和实际资料的应用表明,基于新方程的反演方法能够利用有限角度(偏移距)的数据稳定地反演纵波和横波阻抗,由于在反演过程中,不需要假设纵横波速度为常数,因此该方法还能有效地提高反演结果的精度. 相似文献
13.
14.
《中国科学:地球科学(英文版)》2017,(6)
The relationship between the maximum shear stress in a substrate solid and the elastic wave reflection coefficient from the interface between the substrate solid and an overlying solid half-space is investigated. Both substrate and overlying solid media are assumed to be initially isotropic and stress-free. Then as the substrate is subjected to horizontal confined stresses it becomes anisotropic. It is shown that longitudinal and shear wave reflection coefficients are related to the degree of stress induced anisotropy in the substrate medium. From this relation the confined stress level and the maximum shear stress generated on the vertical planes of the substrate are estimated. Authors in their previous investigation computed plane wave reflection coefficient in a biaxially compressed solid substrate immersed in a fluid. This paper reports for the first time how the maximum shear stress in a biaxially compressed substrate medium can be measured from the plane wave reflection coefficients when the overlying medium is also a solid half-space. 相似文献
15.
Peidong Shi Doug Angus Andy Nowacki Sanyi Yuan Yanyan Wang 《Surveys in Geophysics》2018,39(4):567-611
Seismic anisotropy which is common in shale and fractured rocks will cause travel-time and amplitude discrepancy in different propagation directions. For microseismic monitoring which is often implemented in shale or fractured rocks, seismic anisotropy needs to be carefully accounted for in source location and mechanism determination. We have developed an efficient finite-difference full waveform modeling tool with an arbitrary moment tensor source. The modeling tool is suitable for simulating wave propagation in anisotropic media for microseismic monitoring. As both dislocation and non-double-couple source are often observed in microseismic monitoring, an arbitrary moment tensor source is implemented in our forward modeling tool. The increments of shear stress are equally distributed on the staggered grid to implement an accurate and symmetric moment tensor source. Our modeling tool provides an efficient way to obtain the Green’s function in anisotropic media, which is the key of anisotropic moment tensor inversion and source mechanism characterization in microseismic monitoring. In our research, wavefields in anisotropic media have been carefully simulated and analyzed in both surface array and downhole array. The variation characteristics of travel-time and amplitude of direct P- and S-wave in vertical transverse isotropic media and horizontal transverse isotropic media are distinct, thus providing a feasible way to distinguish and identify the anisotropic type of the subsurface. Analyzing the travel-times and amplitudes of the microseismic data is a feasible way to estimate the orientation and density of the induced cracks in hydraulic fracturing. Our anisotropic modeling tool can be used to generate and analyze microseismic full wavefield with full moment tensor source in anisotropic media, which can help promote the anisotropic interpretation and inversion of field data. 相似文献
16.
Reflection and refraction of plane wave through an interface between fluid and rock with elastic deformations on the basis of the acoustoelastic theory are considered. The effects of stress on the anisotropy and energy reflection and transmission coefficients are investigated. The incident wave plane can coincide with or deviate from planes of material symmetry. Elastic deformations are assumed to be locally homogeneous and to satisfy static boundary conditions. Numerical computations are carried out and comparisons are made with the results predicted in the presence and absence of initial stress. The changes in phase velocity, group velocity, and energy reflection and refraction coefficients due to the presence of stress are displayed graphically and discussed. The results show that the effect of stress depends on its magnitude, direction and form (uniaxial and biaxial). 相似文献
17.
在VTI介质中,由于引入了各向异性参数使得多分量多参数地震反演问题的非线性程度显著增加,因此采用传统的权重加权法构建单目标函数进行反演得到的反演结果往往并不理想.本文以反射率法为基础,结合快速非支配排序遗传算法研究了一种VTI介质的多分量叠前联合反演方法.该方法以反射率法为正演方程,应用互相关原理构建PP波和PSV波的多目标函数,进而采用快速非支配排序遗传算法全局寻优获得VTI介质的厚度、纵横波速度、密度和各向异性参数等多个参数.在正演的过程中,反射率法可以考虑几何扩散、吸收衰减、透射损失、多次波以及纵横波旅行时不匹配等地震波传播效应,更能精确地描述地震波在地下地层中的真实传播情况;在反演的过程中,快速非支配排序遗传算法可以在不引入权重系数的条件下同时优化多个目标函数,获得联合反演问题的Pareto最优解,既不添加权重系数影响又充分利用多分量地震数据.模型测试结果验证了该反演方法的有效性和可行性. 相似文献
18.
Bayesian Markov chain Monte Carlo inversion for anisotropy of PP- and PS-wave in weakly anisotropic and heterogeneous media 
下载免费PDF全文
下载免费PDF全文 A single set of vertically aligned cracks embedded in a purely isotropic background may be considered as a long-wavelength effective transversely isotropy (HTI) medium with a horizontal symmetry axis. The crack-induced HTI anisotropy can be characterized by the weakly anisotropic parameters introduced by Thomsen. The seismic scattering theory can be utilized for the inversion for the anisotropic parameters in weakly anisotropic and heterogeneous HTI media. Based on the seismic scattering theory, we first derived the linearized PP- and PS-wave reflection coefficients in terms of P- and S-wave impedances, density as well as three anisotropic parameters in HTI media. Then, we proposed a novel Bayesian Markov chain Monte Carlo inversion method of PP- and PS-wave for six elastic and anisotropic parameters directly. Tests on synthetic azimuthal seismic data contaminated by random errors demonstrated that this method appears more accurate, anti-noise and stable owing to the usage of the constrained PS-wave compared with the standards inversion scheme taking only the PP-wave into account. 相似文献