共查询到20条相似文献，搜索用时 31 毫秒
1.
Effects of different spatial distributions of physical soil crusts on runoff and erosion on the Loess Plateau in China 总被引：1，自引：0，他引：1 
下载免费PDF全文
下载免费PDF全文 The response of runoff and erosion to soil crusts has been extensively investigated in recent decades. However, there have been few attempts to look at the effects of spatial configuration of different soil crusts on erosion processes. Here we investigated the effects of different spatial distributions of physical soil crusts on runoff and erosion in the semi‐arid Loess Plateau region. Soil boxes (1.5 m long × 0.2 m wide) were set to a slope of 17.6% (10°) and simulated rainfall of 120 mm h?1 (60 minutes). The runoff generation and erosion rates were determined for three crust area ratios (depositional crust for 20%, 33%, and 50% of the total slope) and five spatial distribution patterns (depositional crust on the lower, lower‐middle, middle, mid‐upper, and upper slope) of soil crusts. The reduction in sediment loss (‘sediment reduction’) was calculated to evaluate the effects of different spatial distributions of soil crusts on erosion. Sediment yield was influenced by the area ratio and spatial position of different soil crusts. The runoff rate reached a steady state after an initial trend of unsteadily increasing with increasing rainfall duration. Sediment yield was controlled by detachment limitation and then transport limitation under rainfall. The shifting time of erosion from a transport to detachment‐limiting regime decreased with increasing area of depositional crust. No significant differences were observed in the total runoff among treatments, while the total sediment yield varied under different spatial distributions. At the same area ratio, total sediment yield was the largest when the depositional crust was on the upper slope, and it was smallest when the crust was deposited on the lower slope. The sediment reduction of structural crust (42.5–66.5%) was greater than that of depositional crust (16.7–34.3%). These results provide a mechanistic understanding of how different spatial distributions of soil crusts affect runoff and sediment production. Copyright © 2017 John Wiley & Sons, Ltd. 相似文献
2.
Ian Statham 《地球表面变化过程与地形》1976,1(1):43-62
Certain observed characteristics of scree slopes; namely concavity of profile, straight slope angle less than the angle of repose, and good size sorting of particles, are not consistent with an angle of repose model for accumulation. An alternative model is proposed based upon rockfall and surface stone movement and is tested against experimental data of particle movement in the field. It is found that the mechanical model of stone movement generated adequately explains the motion of particles on scree slopes and that it is in keeping with the characteristics of many screes. The static features of some Isle of Skye screes were also measured and the straight-concave slope form with good downslope sorting of material, characteristic of the rockfall process, was found to be present. 相似文献
3.
Experiments were undertaken to study the nature of granular interaction in running water by examining the influence of fine grain inputs to a coarser sediment bed with a mobile surface. Video recordings of grain sorting by both kinetic sieving and spontaneous percolation are used to diagnose the critical processes controlling the overall bed response. Kinetic sieving takes place in the mobile bed surface, with the finer sediment moving to the bottom of the bedload transport layer at the interface with the underlying quasi‐static coarse bed. We show that the behavior at this interface dictates how a channel responds to a fine sediment input. If, by spontaneous percolation, the fine sediment is able to infiltrate into the underlying quasi‐static bed, the total transport increases and the channel degrades. However, if the fine sediment input rate exceeds the transport capacity or is geometrically unable to infiltrate into the underlying bed, it forms a quasi‐static layer underneath the transport layer that inhibits entrainment from the underlying bed, resulting in aggradation and an increase in bed slope. Copyright © 2016 John Wiley & Sons, Ltd. 相似文献
4.
沙波形态影响水流结构、泥沙输移及动床阻力。本研究采用多波束测深系统首次精细测量了上荆江典型河段的床面地形,采用改进后的沙波形态量化算法统计了各类沙波形态参数,分析了不同水流强度下沙波形态的变化特征。计算结果表明:(1)测量河段小型与大型沙波的平均波高分别为0.16～0.81和0.96～2.31 m,波长分别为13～27和16～41m;沙波尺度相较于水深较小,小型与大型沙波的波高分别不超过水深的0.045和0.150倍;(2)沙波背流面坡度基本不超过14°,小于泥沙水下休止角,其与陡度之间的关系可以用线性方程描述;(3)中洪水流量对沙波形态尺度的塑造作用强于枯水流量,且对浅水区大型沙波形态尺度的塑造作用强于深水区。本研究量化了天然河流的沙波形态,较好地反映了沙波形态特征,能为大型冲积河流沙波形态的量化及特征参数的统计分析提供参考。 相似文献
5.
The April 16, 1991, eruption of Volcán de Colima represents a classical example of partial dome collapse with the generation of progressively longer-runout, Merapi-type pyroclastic flows that traveled up to 4 km along the El Cordoban gullies (East, Central and West). The flows filled the gullies with block-and-ash flow deposits up to 10 m thick, of which, after 7 years of erosion, only remnants remained in the El Cordoban West and East gullies. The El Cordoban Central gully, however, provided a well-preserved and incised longitudinal section of the 1991 deposits. The deposits were emplaced as proximal and distal facies, separated by a change in slope angle from >30° to <20°. The proximal facies consists of massive, clast-supported flow units (up to 1 m thick) with andesite blocks locally supported by a matrix of coarse ash and devoid of segregation structures or grading. The distal facies consists of a massive, matrix-supported deposit up to 8 m thick, which contains dispersed andesite blocks in a fine ash matrix. In the distal facies, a train of blocks marks flow-unit upper boundaries and, although sorting is poor, some grading is present. Thin, finely stratified, or dune-bedded layers of fine ash material are locally present above or below units of both facies. Sedimentologic parameters show that the size or fraction of large pyroclasts (larger than –1 ) decreases from proximal to distal facies, as the percentage of matrix (0 to 4 ) increases, especially immediately beyond the break in slope. We propose that the propagation of the Colima pyroclastic flows is critically dependent on local slope angle, the presence of erodible slope debris, and the decrease in grain size with distance from the vent. The progressive fining is probably caused by some combination of erosion, clast breakup and deposition of larger pyroclasts, and is itself influenced by the slope angle. In the proximal region, the flows moved as granular avalanches, in which interacting grains ground each other and erosion occurred to produce an overriding dilute ash cloud. The maximum runout distance of the avalanches was controlled by the angle of repose of the material, and the volume and grain size of source and eroded material. Because the slope angle is close to the repose angle for this debris, granular avalanches were not able to propagate far beyond the change in slope. If, however, an avalanche had enough mass in finer grain size fractions, at least part of the flow continued beyond the break in slope and across the volcano apron, propagating in a turbulent state and depositing surge layers, or in an otherwise settling-modified state and depositing block-and-ash flow layers.Editorial responsibility: T Druitt 相似文献
6.
U.C.E. ZANKE 《国际泥沙研究》2003,18(1)
1 PROBLEM DEFINITION Owing to the practical importance of the initiation of motion many researchers began to tackle this problem even at the beginning of the last century (e.g. Kramer (1932, 1935), Casey (1935)). Shields (1936, Fig. 1) developed a non-dimensional representation based on the measured data of Casey, Kramer, USWES and Gilbert, together with his own data based on investigations with succinite sand, lignite, granite chips and heavy spar. Despite the different material p… 相似文献
7.
Renske C. Terwisscha van Scheltinga Giovanni Coco Heide Friedrich 《地球表面变化过程与地形》2019,44(10):1881-1894
This work presents measurements and analysis of sand particle velocities over a subaqueous dune with median sand diameter of 0.85 mm. Time-lapse images of the mobile bed and an automated particle image velocimetry (PIV)-based cross-correlation method are used to obtain mean velocity of sand particles. This technique is shown to be consistent with measurements obtained with manual tracing. The measurements indicate an increase in mean particle velocity over a dune slope. Three regions are distinguished over the dune slope: (1) region of fluctuating particle velocity, (2) region of increasing particle velocity, and (3) region of maximum particle velocity. The observations are aligned with experimental and numerical modelling studies, indicating fluctuations in flow velocity over a dune stoss slope. We furthermore show that the standard deviation of the mean particle velocity is affected by the slope location and decreases from the lower slope towards the upper slope. The particle velocity variability is discussed in the context of general onset and cessation of sediment transport, the effect of the reattachment zone, sweep-transport events, and the existence of superimposed bedforms. With this work we bridge the gap between measurements of bedload transport at the particle-scale and at the bedform-scale. © 2019 John Wiley & Sons, Ltd. 相似文献
8.
Shu Gao 《Continental Shelf Research》2009,29(16):1927-1936
A forward modeling approach is proposed to simulate the preservation potential of tidal flat deposits. The preservation potential is expressed as a function of net deposition rate and a factor that represents the vertical flux of suspended load, or seabed lowering during erosion periods associated with bedload transport. The model takes into account a number of geometric parameters of a tidal flat sediment system and sediment dynamic processes. The former includes high water level, total sediment supply, the annual rate of the supply, the ratio of mud to bilk sediment in the supply, the bed slope of the tidal flat profile, as well as the slope of the stratigraphic boundary; the latter includes spring-neap cycles of tidal water level changes, boundary layer processes, resuspension of fine-grained sediments, bedload transport due to tidal currents, and bed elevation changes in response to sediment movement. Using this model, numerical experiments are carried out for a tidal flat system on the Jiangsu coast, eastern China, with the input data being derived from literature and from a series of sediment cores collected along an onshore–offshore transect. The results show that the preservation potential is highest over the upper part of the inter-tidal zone and in the lower part of the sub-tidal zone, and lowest near mean sea level and at low water on springs. The preservation potential tends to decrease with the advancement of the shoreline. The bed slope, tidal current direction and resuspension intensity influence the spatial distributions of the preservation potential. An implication of these results is that the temporal resolution of the tidal flat record depends upon the location and depth within the deposit; this should be taken into account in the interpretation of sedimentary records. Further studies are required to improve the model, on the hydrodynamic processes associated with extremely shallow water depths, sediment dynamic modeling of bed slope and profile shape, and the combined action of tides and waves for sediment transport on tidal flats. 相似文献
9.
10.
R. G. D. Davidson‐Arnott B. O. Bauer I. J. Walker P. A. Hesp J. Ollerhead C. Chapman 《地球表面变化过程与地形》2012,37(11):1227-1241
Wind flow and sand transport intensity were measured on the seaward slope of a vegetated foredune during a 16 h storm using an array of sonic anemometers and Wenglor laser particle counters. The foredune had a compound seaward slope with a wave‐cut scarp about 0.5 m high separating the upper vegetated portion from the lower dune ramp, which was bare of vegetation. Wind direction veered from obliquely offshore at the start of the event to obliquely onshore during the storm peak and finally to directly onshore during the final 2 h as wind speed dropped to below threshold. Sand transport was initially inhibited by a brief period of rain at the start of the event but as the surface dried and wind speed increased sand transport was initiated over the entire seaward slope. Transport intensity was quite variable both temporally and spatially on the upper slope as a result of fluctuating wind speed and direction, but overall magnitudes were similar over the whole length. Ten‐minute average transport intensity correlates strongly with mean wind speed measured at the dune crest, and there is also strong correlation between instantaneous wind speed and transport intensity measured at the same locations when the data are smoothed with a 10 s running mean. Transport on the beach for onshore winds is decoupled from that on the seaward slope above the small scarp when the wind angle is highly oblique, but for wind angles <45° from shore perpendicular some sand is transported onto the lower slope. Copyright © 2012 John Wiley & Sons, Ltd. 相似文献
11.
The complex interactions between rainfall‐driven erosion processes and rainfall characteristics, slope gradient, soil treatment and soil surface processes are not very well understood. A combination of experiments under natural rainfall and a consistent physical theory for their interpretation is needed to shed more light on the underlying processes. The present study demonstrates such a methodology. An experimental device employed earlier in laboratory studies was used to measure downslope rain splash and ‘splash‐creep’, lateral splash, upslope splash and rainfall‐driven runoff transport (wash) from a highly aggregated clay‐rich oxisol exposed to natural rainfall in West Java, Indonesia. Two series of measurements were made: the first with the soil surface at angles of 0°, 5°, 15° and 40°; and the second all at an angle of 5° but with different tillage and mulching treatments. A number of rainfall erosivity indices were calculated from rainfall intensity measurements and compared with measured transport components. Overall storm kinetic energy correlated reasonably well with sediment transport, but much better agreement was obtained when a threshold rainfall intensity (20 mm h?1) was introduced. Rain splash transport measurements were interpreted using a recently developed theory relating detachment to sediment transport. Furthermore, a conceptually sound yet simple wash transport model is advanced that satisfactorily predicted observed washed sediment concentrations. The lack of replication precluded rigorous assessment of the effect of slope and soil treatment on erosion processes, but some general conclusions could still be drawn. The results stress the importance of experiments under conditions of natural rainfall. Copyright © 2002 John Wiley & Sons, Ltd. 相似文献
12.
Evaluating spatial variation of suspended sediment rating curves in the middle Yellow River basin,China 总被引：1，自引：0，他引：1 下载免费PDF全文
下载免费PDF全文 Abstract The suspended sediment load in the middle Yellow River basin (YRB) cannot be well predicted by capacity‐based transport formulas because a large fraction of suspended sediment load is composed of wash load. This study evaluated the spatial variations of sediment rating curves (SRCs) in the middle YRB. Both power and linear SRCs were used to fit daily flow and suspended sediment concentration (SSC) historical data at 49 gauging stations throughout the middle YRB. The spatial variation in regression coefficients was investigated, and the relationship between regression coefficients and the physical characteristics of watersheds was discussed. The results indicate that SRC regression coefficients vary with drainage area and basin slope, but their responses to these parameters are remarkably different in watersheds with different underlying surfaces, which indicates the significance of sediment availability, erodibility, and grain size distribution. For power SRCs representing sediment transport in unsaturated flows, the regression coefficients are more closely correlated with the drainage area in loess regions and with the basin slope in rock mountain regions. For linear SRCs representing sediment transport in saturated flows, saturated SSCs vary with coarse (particle size > 0.05 mm) and fine (particle size < 0.01 mm) fractions in suspended sediment. The maximum saturated SSC among the different gauging stations is associated with the optimal grain size composition of suspended sediment, which has been proposed for loess regions in previous studies. This study provides theoretical support for estimating the regression parameters for sediment transport modelling, especially in ungauged basins. 相似文献
13.
Using a new low-temperature dynamic triaxial apparatus, the influence law of freezing-thawing cycles on clay shear strength is studied. In this research, the concept of correction coefficients of freezing-thawing cycles on clay static strength, cohesion and internal friction angles is proposed, and the change patterns, correction curves and regressive formulae of clay static strength, cohesion and internal friction angles under freezing-thawing cycles are given. The test results indicate that with increasing numbers of freezing-thawing cycles, the clay static strength and cohesion decrease exponentially but the internal friction angle increases exponentially. The performance of static strength, cohesion and internal friction angles are different with increasing numbers of freezing-thawing cycles, i.e., the static strength decreases constantly until about 30% of the initial static strength prior to the freezing-thawing cycling and then stays basically stable. After 5–7 freezing-thawing cycles, the cohesion decreases gradually to about 70% of the initial cohesion. The internal friction angle increases about 20% after the first freezing-thawing cycle, then increases gradually close to a stable value which is an increase of about 40% of the internal friction angle. The freezing-thawing process can increase the variation of the density of the soil samples; therefore, strict density discreteness standards of frozen soil sample preparation should be established to ensure the reliability of the test results. 相似文献
14.
Sediment data were analyzed to determine grain‐size dependant factors affecting sediment transport in a low‐ordered, ephemeral watershed. Sediment and flow samples were collected during 22 flow events at the outlet of a 4·53 ha sub‐watershed within the Walnut Gulch Experimental Watershed in south‐eastern Arizona. Measured concentrations ranged from 4191 to 115 045 mg l?1 and included grain sizes up to 8·0 mm in diameter. Two grain‐size dependent transport patterns were observed, that of the finer grain‐size fraction (approximately < 0·25 mm) and that of a coarser grain‐size fraction (approximately ≥ 0·25 mm). The concentration of the fine fraction decreased with flow duration, peaking near the beginning of a flow event and declining thereafter. The concentration of the fine fraction showed slight trends with season and recovery period. The concentration of the coarse fraction displayed a slight negative trend with instantaneous discharge and was not correlated with event duration. These patterns typically produced a condition where the majority of the fine fraction of the sediment yield was evacuated out of the watershed before the hydrograph peak while the majority of the coarser sediment was evacuated during the falling limb of the hydrograph. Each grain‐size dependent transport pattern was likely influenced by the source of the associated sediment. At the flow event time scale, the fines were primarily wash load, supplied from the hillslopes and the coarser grains were entrained from the channel bed. Because transport patterns differ based on grain size, attempts to define the total sediment concentration and sediment yield by the behavior of a single grain‐size fraction may lead to erroneous results, especially when a large range of sediment grain sizes are present. Copyright © 2010 John Wiley & Sons, Ltd. 相似文献
15.
Coastal Louisiana has the nation's most fragile and valuable wetlands,whose loss represents 80%of the total losses in the United States.The severely restricted mobility of conventional shoreline protection structures makes them impossible to be redeployed.The Wave Suppression and Sediment Collection(WSSC)system is a novel technology of high mobility and compatible with existing shoreline protection technologies.Previous laboratory studies on WSSC showed great potential for wave reduction and sediment collection.The current study aimed to optimize the design parameters of WSSC using a validated computational model.A computational fluid dynamics(CFD)model was developed and validated using experimental data from the previous laboratory study.Then,a parametric analysis was conducted with a focus on the performance optimization of wave reduction and sediment collection with respect to pipe diameter and face slope.Simulation results showed that the wave reduction efficiency decreased with increasing pipe diameter and face slope.In contrast,the sediment transport efficiency was enhanced by increasing pipe diameter but was not affected significantly by varying face slopes. 相似文献
16.
The slope effects on sediment trapping process in vegetative filter strips (VFS) are usually neglected in current modelling practices for VFS operation, which hamper the VFS design and performance evaluation, especially on steep slopes. To fill the knowledge gap, 12 laboratory experiments of sediment trapping in VFS were conducted with three different inflow discharge (80, 100, and 120 ml s−1) and four slope angles (5,10, 15, and 20°). The experimental results show that, on steep slopes (10, 15, and 20°), a part of trapped sediment particles in VFS can be eroded again and then dragged to the downstream as bed load, whilst they do not move on gentle slope (5°). To describe the complex processes, a simple and effective modelling framework was developed for sloped VFS by coupling the slope infiltration, runoff, and modified sediment transport model. The model was tested against the experimental results and good agreements between the modelled and observed results were found in both runoff and sediment transport processes for all cases. On steep slopes, the sediment trapping performance of VFS decreases significantly because the erosion of deposited sediment particles can account for more than 60% of the sediment load in the outflow. The slope effect on sediment trapping efficiency of VFS varies greatly with soil, VFS, and slope properties. The model was compared with previous sediment transport equation and found that both methods can satisfactorily predict the sediment trapping of VFS on gentle slopes, but previous sediment transport equation is likely to overestimate the sediment trapping efficiency in VFS on steep slopes. This model is expected to provide a more realistic and accurate method for predicting runoff and sediment reduction in VFS on sloping surfaces. 相似文献
17.
18.
Fred Worrall Tim P. Burt Gregory R. Hancock Nicholas J.K. Howden John Wainwright 《地球表面变化过程与地形》2020,45(15):3869-3878
This study has hypothesized that for many rivers the trade-off between flow accumulation and the decrease in slope along channel length means that stream power increases downstream and, moreover, that given the low slope angles in headwater and low-order streams, they would have insufficient stream power to erode let alone transport sediment. The study considered the stream power profile, the particle travel distances and the application of the Hjulström curve based on the velocity profile of nine, large UK catchments. The study showed that:
- Some rivers never showed a maximum in their longitudinal stream power profile, implying that some rivers never develop a deposition zone before they discharge at the tidal limit.
- Particle travel distances during a bankfull discharge event showed that for some rivers 91% of the upper main channel would not be cleared of sediment. Furthermore, while some rivers could transport a 2 mm particle their entire length in one bankfull event, for another river it would take 89 such events.
- The Hjulström curve shows that for three of the study rivers the upper 20 km of the river was not capable of eroding a 2 μm particle.
- The study has shown that for all rivers studied, erosion is focused downstream and deposition upstream. Many UK rivers have a dead zone where, on time scales of the order of centuries, no erosion or transport occurs and erosion only occurs in the lower courses of the channel where discharge rather than slope dominates – we propose these as underpowered rivers.
19.
Stephen Dale Holness 《地球表面变化过程与地形》2004,29(1):91-103
Sediment transport in the scoria areas of Marion Island is primarily the result of needle‐ice‐induced frost creep associated with diurnal soil frost cycles. Clasts move most rapidly in ?ne textured areas (532 mm a?1; SD 382), more slowly in stony areas (161 mm a?1; SD 179), and most slowly in blocky areas (26 mm a?1; SD 23). Movement rates increase with increasing frost susceptibility of sediments, slope angle and altitude. The heave of dowels indicates that frost heave is active in all the scoria areas examined. The depth of effective frost heave increases with increasing altitude, with frost heave being restricted to the upper 100 mm of the soil in low altitude areas (<200 m). The heave of 150 mm dowels at the higher altitude sites provides evidence for segregation ice formation at depths greater than those associated with needle ice and diurnal soil frost cycles. Vertical movement pro?les show a concave downslope pro?le, with sediment movement rates being most rapid at the soil surface and decreasing rapidly with depth. This pro?le shape is typical of areas dominated by diurnal freeze–thaw cycles and needle ice. The capture of sediments moving downslope in troughs and the sampling of material lifted by needle ice, suggest that sediment transport by needle ice under present conditions is extremely effective. Observations suggest that although both ?ne material and clasts are transported downslope, some preferential transport of clasts occurs. Experiment results and observations of soil frost processes suggest that frost creep associated with needle ice activity is the dominant slope process in the scoria areas of Marion Island. Other slope processes such as slopewash and debris ?ows appear to play a relatively minor and localized role in sediment transport. It is suggested that needle ice activity is likely to be the dominant geomorphic agent in other areas of the Subantarctic with similar climatic characteristics to Marion Island. Copyright © 2004 John Wiley & Sons, Ltd. 相似文献
20.
《国际泥沙研究》2020,35(6):600-608
Accumulation of the sediment in the stream of the diversion channels adversely affects its operational systems. Diversion channels are often constructed perpendicular to the main river. In this study, the water flow and sediment transport in the diversion channel with different angles were investigated in an attempt to maximize water discharge and minimize sediment discharge. A physical model with movable bed was used to simulate water and sediment flow with five diversion angles (θ) between (30°–90°). Moreover, three bed width ratios (Br) (the relation between diversion to main channel bed width) between 30% and 50% and five total discharges between (7.25 L/s to 12.25 L/s) were considered for each case of (θ). The results showed, up to 10%, increasing in proportion discharge ratios for 30 and 45 diversion angles compared with 90° diversion angle. The results also showed that the lowest diversion sediment concentration was provided by the (θ) of 30°. Across all scenarios, the average proportion concentration reduction was 64%, compared with 90° diversion angle. Closer observation of the diversion system mechanism confirmed that decreased (θ) result in decreased sediment concentrations in the diversion channels. In conclusion, the diversion channel water and sediment discharge could be effectively managed by changing the (θ) to 30° or 45° instead of 90°. 相似文献