共查询到20条相似文献，搜索用时 31 毫秒
1.
研究了基于矢量有限元方法的大地电磁带地形三维反演算法并开发了三维反演计算程序代码.在大地电磁场正演数值模拟方面,采用并行直接稀疏求解器PARDISO且无需进行散度校正的快速正演方案,对典型地形模型,在中等规模计算条件下,与双共轭梯度法(BICG)计算结果比较,发现PARDISO比BICG快10倍以上;通过理论模型试算,并与前人的有限元法计算结果对比,验证了带地形三维正演计算程序的正确性.在反演方面,本研究基于共轭梯度方法编写了大地电磁带地形三维反演代码,为了避免直接求取雅可比矩阵,将反演中的雅可比矩阵计算问题转为求解两次“拟正演”问题,进而将PARDISO的快速正演方案应用于“拟正演”问题的求解,以提高反演计算效率.利用开发的反演算法对多个带地形地电模型的合成数据进行了三维反演,反演结果能很好地重现理论模型的电性结构,验证了本文开发的三维反演算法的正确性和可靠性.最后,利用该算法反演了某矿区大地电磁实测数据,反演得到的三维电性结构清晰地反映了研究区的地电特征,将反演结果与该区已有地质资料结合进行解释,应用效果明显,进一步验证了本文算法的有效性. 相似文献
2.
传统三维大地电磁各向异性模拟均是基于规则六面体网格,计算精度有限且较难拟合复杂地质条件.本文采用面向目标自适应非结构矢量有限元法,对三维大地电磁各向异性介质进行模拟.首先从电场双旋度方程出发,利用伽辽金方法建立变分方程;然后利用电流密度连续性条件构建适合大地电磁各向异性问题的加权后验误差估计方法,实现面向目标的网格自适应正演;最后通过典型算例分析各向异性对网格自适应和大地电磁响应的影响特征以及各向异性的识别方法.本文算法能够高精度地拟合起伏地表和任意各向异性介质,适用于分析复杂地电条件大地电磁响应特征,为提高大地电磁资料解释水平提供了理论基础. 相似文献
3.
A fully three‐dimensional finite‐element algorithm has been developed for simulating controlled‐source electromagnetic surveys. To exploit the advantages of geometric flexibility, frequency‐domain Maxwell's equations of the secondary electric field were discretised using edge‐based finite elements while the primary field was calculated analytically for a horizontally layered‐earth model. The resulting system of equations for the secondary field was solved using a parallel version of direct solvers. The accuracy of the algorithm was successfully verified by comparisons with integral‐equations and iterative solutions, and the applicability to models containing large conductivity contrasts was verified against published data. The advantages of geometry‐conforming meshes have been demonstrated by comparing different mesh systems to simulate an inclined sheet model. A comparison of the performance between direct and iterative solvers demonstrated the superior efficiency of direct solvers, particularly for multisource problems. 相似文献
4.
本研究实现了一套基于有限差分（FD）方法的大地电磁测深数据带地形三维反演算法及代码.其中,在大地电磁场正演数值模拟方面,开发了起伏地形条件下基于交错网格剖分、有限差分方法的大地电磁测深三维正演代码;在满足平面波场假设的前提下,使用长方体网格剖分模拟三维起伏地形,实现了带地形三维正演计算;并设计理论模型进行试算,经试算结果与前人的有限元法计算结果对比,验证了所研发的带地形三维正演计算的正确性与可靠性.在反演方面,本研究基于非线性共轭梯度方法编写了大地电磁测深带地形三维反演代码,试验了不同的共轭梯度搜索因子β,避免了目标函数对海森矩阵（参数二次导数矩阵）的显式计算和存储,初步实现了大地电磁资料的带地形三维反演.最后,对一系列理论模型进行正演计算,利用其生成的合成数据模拟实测数据进行反演,并与现有的不带地形大地电磁测深三维反演结果比较,检验了所研发的带地形三维反演计算的可靠性与稳定性. 相似文献
5.
We describe an algorithm for inverting magnetotelluric (MT) data in the presence of strong bathymetry or topography. Instead of correcting distortions due to bathymetry or topography we incorporate them directly into the inversion. To achieve a high accuracy in computing MT responses we use finite‐difference approximations that permit sloping discrete boundaries inside model elements. The same approach is applicable to any seafloor electromagnetic calculation and can also be used to incorporate steep topography on land. We test our approach on various topographic features and compare our results to that of a finite element approach. Finally, we present inversion examples that illustrate the effectiveness of our inversion algorithm in recovering true subsurface structures in the presence of strong bathymetry and topography. 相似文献
6.
本文基于非结构网格实现了海洋可控源电磁法三维有限元正演模拟.该算法采用完全非结构网格剖分,可以模拟任意起伏地形和复杂地电模型.为了避免场源的奇异性,采用一次场/二次场分解算法,一次场由基于Schelkunoff势函数的一维解析公式得到.为了提高算法的精度和效率,采用对测点附近单元和异常体区域进行体积约束加密的方法,实现了非结构网格的局部加密.一、二维模型计算和分析表明,本文采用的局部加密方法能够明显地改善算法的精度,最大相对误差基本在1%以内.对三维模型计算及对比分析,说明了该算法对三维可控源电磁正演的实用性.复杂海底地形模型的正演模拟表明,海底地形对电磁场的影响很大,在进行海洋可控源电磁资料解释时,地形的影响有必要考虑在内. 相似文献
7.
根据库伦规范势的定义,推导出关于磁矢量势和电标量势的偏微分方程,为了克服由电流源引起的奇异性和数值模拟计算困难,将电磁总场分解为一次场和二次场,一次场由基于Schelkunoff势函数的一维正演算法得到,二次场由有限元法计算得到,实现了海洋可控源电磁法三维有限元正演算法。通过一维数值模拟实例,验证该算法的计算精度。然后,利用该算法对带海底地形的三层储层模型进行正演,分析了海底地形对海洋控源电磁场各分量产生的影响。 相似文献
8.
现有海洋可控源电磁三维数值模拟方法大多基于电导率各向同性介质理论,不能模拟海底地层电导率各向异性的实际情况.本文给出了电导率各向异性三维介质中电性源海洋可控源电磁二次电场的边值问题以及相应的变分问题,采用长方体单元对研究区域剖分,将场分量定义在剖分单元的边上,利用矢量有限单元法求解变分问题,实现了电导率任意各向异性海洋可控源电磁三维矢量有限元数值模拟.这个新的正演方法可以计算电导率任意各向异性三维地电模型的海洋可控源电磁响应,基于二次场矢量有限元法直接求解电磁场,避免了传统有限元方法可能遇到的伪解问题和难于处理电场法向分量不连续的问题,提高了数值模拟计算精度.一维电导率各向异性模型电磁场数值解与解析解吻合得相当好,无论在源附近还是远离源处相对误差均不超过1%.电导率各向异性二维模型的计算结果与已有文献采用的非结构有限元模拟结果十分吻合.三维地电模型数值模拟结果显示,电导率各向异性张量电导率主轴分量和欧拉角对不同装置海洋可控源电磁响应均有着明显的影响. 相似文献
9.
We report on strong coast effect distortions observed for broadband marine magnetotelluric (MT) data collected on the forearc offshore northeastern Japan. Eight days of horizontal electric and magnetic fields recorded at eight seafloor stations and the horizontal magnetic fields from a land remote station were processed with a robust multiple-station algorithm, yielding good MT responses and inter-station transfer functions at periods of 7–10,000 s. Transverse electric (TE) mode responses have cusps in apparent resistivity and negative phases at periods around 1000 s, while the transverse magnetic (TM) mode responses are galvanically depressed below the TE responses. An analysis of inter-station transfer functions confirms that the apparent resistivity cusps are a magnetic field, rather than electric field, phenomenon, consisting of an amplitude minimum and rapid phase change around a characteristic frequency. Poynting vectors for a TE coast effect model study illustrate that the anomalous phases are associated with energy diffusing back up to the seafloor from below, after being turned around from its usual downward propagating trajectory by inductive coupling between the conductive ocean and the resistive seafloor along the continental margin. We show that the characteristic frequency and position of the TE mode apparent resistivity cusps are determined by a relatively simple combination of the electrical resistivity of the seafloor, the depth of the ocean, and the distance from the coastline. By including coastlines and bathymetry in 2D inversion, we recover the seafloor conductivity structure along the forearc, demonstrating that broadband data can constrain the thickness of conductive forearc sediments and the underlying high resistivity associated with the mantle wedge and subducting oceanic lithosphere. 相似文献
10.
In applied studies on electromagnetic well-logging and electric prospecting, a medium is supposed to be either isotropic or
with conventional anisotropy of conductivity. However, in the meantime, there is a clear hint that a medium may exhibit even
biaxial anisotropy; i.e., the resistances along all three directions X, and Y, Z are different. Based on the analytical solution by the method of separation of variables, the paper considers an algorithm
for the calculation of the electromagnetic field in a layered medium with biaxial conductivity anisotropy involving an arbitrary
direction of horizontal conductivities in each layer. In this case, the theoretical solution and the algorithm display substantial
peculiarities, and the numerical implementation involves many complexities. These problems were examined and solved mainly
due to the constant comparison with the calculations carried by the finite element method and their analysis. Programs for
the calculation of electromagnetic fields in the frequency and time domains were developed, and results of geoelectric interest
were obtained. For example, the excitement of a horizontally-layered section by a magnetic dipole produces a vertical electric
component of the field. 相似文献
11.
带地形的大地电磁二维正演数值模拟多数基于电性各向同性理论,由于地球内部电性各向异性现象的普遍存在,基于电性各向异性理论研究地形起伏情况下大地电磁二维正演数值模拟就显得非常迫切.本文首先由麦克斯韦方程出发,引入张量电导率,求得一组关于平行走向的电场分量Ex和磁场分量Hx的二阶偏微分方程,使用有限差分法求解出Ex和Hx的近似解,并以此求得其他场分量;其次,引入地形因素,改变变量在网格节点中的排列方式,选择交错排列方式从而给有限差分系数矩阵的最大带宽分配合理的存储空间;最后,使用Weaver的方法解决TM模式下,在地-空分界面垂直于构造走向的一些区域存在不同电导率的问题.通过对带地形的二维电性各向异性结构做正演模拟,研究地形因素对大地电磁响应的影响;以电性各向异性理论为基础,将地形因素引入对实测大地电磁资料的处理中,通过做二维正演拟合和未引入地形因素的结果做对比,说明电性各向异性现象的普遍存在,认识地形因素对观测大地电磁场的影响,为今后分析解释实测大地电磁资料包含地形因素和电性各向异性情况提供理论基础和技术指导. 相似文献
12.
本文提出一种空间波数混合域磁异常场三维数值模拟方法.该方法利用磁位三维空间域积分为卷积的特点,沿水平方向进行二维傅里叶变换,把空间域磁位满足的三维积分问题转化为不同波数之间相互独立的垂向一维积分问题.保留垂向为空间域,优势之一在于便于浅层单元剖分可适当加密,随着深度增加,单元剖分适当稀疏,可以准确模拟任意复杂地形和磁性体的磁异常,兼顾了计算精度与计算效率;优势之二在于一维积分垂向可离散为多个单元积分之和,每个单元采用二次形函数表征磁化强度,可得出单元积分的解析表达式,计算精度高、效率高.该方法充分利用一维形函数积分的高效和高精度、快速傅里叶变换的高效性及算法高度并行性,实现了磁异常场高效、高精度的数值模拟.设计棱柱体模型,将模型解析解与空间波数混合域法的数值解对比,结果表明该方法计算精度高、效率高.设计了组合棱柱体复杂模型,对比分析了标准FFT扩边法与Gauss-FFT法的计算精度与计算效率,总结了标准FFT的扩边系数选取策略.针对任意复杂地形条件下的磁异常模拟问题,本文提出一种适用于起伏地形条件下的磁异常场快速计算方法,并对其有效性进行了验证. 相似文献
13.
Transient electromagnetic surveys with unimodal transverse magnetic field: ideas and results 
下载免费PDF全文
下载免费PDF全文 Vladimir S. Mogilatov Arkadiy V. Zlobinskiy Boris P. Balashov 《Geophysical Prospecting》2017,65(5):1380-1397
The theory behind transient electromagnetic surveys can be well described in terms of transverse magnetic and transverse electric modes. Soundings using transverse magnetic and transverse electric modes require different source configurations. In this study, we consider an alternating transverse magnetic field excitation by a circular electric dipole. The circular electric dipole transmitter is a horizontal analogue of the vertical electric dipole. Offshore surveys using circular electric dipole might represent an alternative to the conventional marine controlled‐source electromagnetic method at shallow sea and/or for exploring relatively small targets. Field acquisition is carried out by recording either electric or magnetic responses. Electric responses bear information on the 1D structure of a layered earth and successfully resolve high‐resistivity targets in marine surveys. Land‐based circular electric dipole soundings are affected by induced polarisation. On the contrary, magnetic responses are absent on the surface of a 1D earth, and as a result, they are very sensitive to any and even very small 3D conductivity perturbations. In addition, they are sensitive to induced polarisation or some other polarisation effects in the subsurface. At present, circular electric dipole transmitters and magnetic receivers are successfully used in on‐land mineral and petroleum exploration. 相似文献
14.
Effects of the sea floor topography on the 1D inversion of time‐domain marine controlled source electromagnetic data 下载免费PDF全文
下载免费PDF全文 Time‐domain marine controlled source electromagnetic methods have been used successfully for the detection of resistive targets such as hydrocarbons, gas hydrate, or marine groundwater aquifers. As the application of time‐domain marine controlled source electromagnetic methods increases, surveys in areas with a strong seabed topography are inevitable. In these cases, an important question is whether bathymetry information should be included in the interpretation of the measured electromagnetic field or not. Since multi‐dimensional inversion is still not common in time‐domain marine controlled source electromagnetic methods, bathymetry effects on the 1D inversion of single‐offset and multi‐offset joint inversions of time‐domain controlled source electromagnetic methods data are investigated. We firstly used an adaptive finite element algorithm to calculate the time‐domain controlled source electromagnetic methods responses of 2D resistivity models with seafloor topography. Then, 1D inversions are applied on the synthetic data derived from marine resistivity models, including the topography in order to study the possible topography effects on the 1D interpretation. To evaluate the effects of topography with various steepness, the slope angle of the seabed topography is varied in the synthetic modelling studies for deep water (air interaction is absent or very weak) and shallow water (air interaction is dominant), respectively. Several different patterns of measuring configurations are considered, such as the systems adopting nodal receivers and the bottom‐towed system. According to the modelling results for deep water when air interaction is absent, the 2D topography can distort the measured electric field. The distortion of the data increases gradually with the enlarging of the topography's slope angle. In our test, depending on the configuration, the seabed topography does not affect the 1D interpretation significantly if the slope angle is less or around 10°. However, if the slope angle increases to 30° or more, it is possible that significant artificial layers occur in inversion results and lead to a wrong interpretation. In a shallow water environment with seabed topography, where the air interaction dominates, it is possible to uncover the true subsurface resistivity structure if the water depth for the 1D inversion is properly chosen. In our synthetic modelling, this scheme can always present a satisfactory data fit in the 1D inversion if only one offset is used in the inversion process. However, the determination of the optimal water depth for a multi‐offset joint inversion is challenging due to the various air interaction for different offsets. 相似文献
15.
为了易于模拟野外复杂地形和地下任意形状地电体模型,将有限元单元网格设计为三角单元;并考虑到野外实际勘探中,地球介质的电性参数均是连续变化的情况,单元内的场值和电性参数被设计为双线性变化;推导出二维起伏地形条件下大地电磁法有限元数值模拟算法;根据单元节点主场值和线性插值形函数间的关系,计算出单元节点的辅助场值;在二维起伏地形情况下,定义TE、TM模式视电阻率和阻抗相位.4个模型的计算的结果与解析法的均方根误差小于1%,地形模拟与前人的计算结果相符,模拟倾斜界面异常体,能有效的反映出其异常形态. 相似文献
16.
17.
频率域地空电磁探测方法是指在地面布设人工场源,在空中测量电磁场的一种高效的地球物理勘探技术.该方法具有大范围、高通过性、快速测量的优势,尤其适合崎岖山地、沙漠、沼泽、海陆交互带等复杂地貌区域的资源勘查.但是这些地区的地形起伏通常较大,因此分析地形对地空电磁响应的影响具有重要意义.本文利用有限元法对频率域地空电磁响应进行了正演计算,分析了起伏地表条件下的频率域地空电磁响应特征.首先利用傅里叶变换将2.5维问题转化成二维问题,利用伽辽金加权余量法推导了相应的离散有限元方程组.采用任意四边形单元对区域进行不均匀网格剖分,源和异常体附近网格加密处理,保证计算精度,远离目标区域网格逐渐稀疏,模拟无穷远边界,降低对计算资源的要求.在单元内进行插值,将有限元方程组变换为线性方程组,采用总场算法,利用具有一定面积的伪δ函数表达源电流分布,源项近似为分布在以电偶极源为中心的25个节点上.通过求解线性方程组得到波数域电磁响应,再对波数域电磁场响应进行反傅里叶变换从而获得空间域2.5维频率域电磁场值.通过对比2.5维正演结果与均匀半空间解析解,验证了本文算法的精度,同时本文还对地空电磁场与地面电磁场的响应特性进行了对比. 相似文献
18.
基于非结构网格有限元方法开展了三维复杂地电模型的线源井地电法的高效正演模拟研究,探讨了通过求取电场响应导数来刻画目标体边界范围、采用差异场地形校正技术来消除地形影响等措施对井地电法成像的效果和精度的影响。并通过对比与解析解,验证了本文数值解算法的有效性。模型计算结果表明：积水巷道的空间位置和走向均会引起视电阻率的显著变化,视电阻率变化率的极值准确且清晰地指示了巷道边界的位置;电位的归一化总水平导数极大地提高了井地电法对目标体复杂边界位置的识别能力;地形对井地电场分布的影响也很大,其视电阻率响应与地形形状近似呈对称关系,利用差异场技术能有效地削弱地形对井地电法高精度成像的影响。 相似文献
19.
Elimination of the water-layer response from multi-component source and receiver marine electromagnetic data 总被引：1，自引：0，他引：1
Janniche Iren Nordskag Lasse Amundsen Lars Løseth Egil Holvik 《Geophysical Prospecting》2009,57(5):897-918
This paper presents the theory to eliminate from the recorded multi‐component source, multi‐component receiver marine electromagnetic measurements the effect of the physical source radiation pattern and the scattering response of the water‐layer. The multi‐component sources are assumed to be orthogonally aligned above the receivers at the seabottom. Other than the position of the sources, no source characteristics are required. The integral equation method, which for short is denoted by Lorentz water‐layer elimination, follows from Lorentz' reciprocity theorem. It requires information only of the electromagnetic parameters at the receiver level to decompose the electromagnetic measurements into upgoing and downgoing constituents. Lorentz water‐layer elimination replaces the water layer with a homogeneous half‐space with properties equal to those of the sea‐bed. The source is redatumed to the receiver depth. When the subsurface is arbitrary anisotropic but horizontally layered, the Lorentz water‐layer elimination scheme greatly simplifies and can be implemented as deterministic multi‐component source, multi‐component receiver multidimensional deconvolution of common source gathers. The Lorentz deconvolved data can be further decomposed into scattering responses that would be recorded from idealized transverse electric and transverse magnetic mode sources and receivers. This combined electromagnetic field decomposition on the source and receiver side gives data equivalent to data from a hypothetical survey with the water‐layer absent, with idealized single component transverse electric and transverse magnetic mode sources and idealized single component transverse electric and transverse magnetic mode receivers. When the subsurface is isotropic or transverse isotropic and horizontally layered, the Lorentz deconvolution decouples into pure transverse electric and transverse magnetic mode data processing problems, where a scalar field formulation of the multidimensional Lorentz deconvolution is sufficient. In this case single‐component source data are sufficient to eliminate the water‐layer effect. We demonstrate the Lorentz deconvolution by using numerically modeled data over a simple isotropic layered model illustrating controlled‐source electromagnetic hydrocarbon exploration. In shallow water there is a decrease in controlled‐source electromagnetic sensitivity to thin resistors at depth. The Lorentz deconvolution scheme is designed to overcome this effect by eliminating the water‐layer scattering, including the field's interaction with air. 相似文献
20.
地表起伏地形在野外矿产资源勘察中不可避免,其对直流电阻率法勘探影响巨大.近年来,电阻率三维正演取得诸多进展,特别是应用非结构网格我们能够进行任意复杂地形和几何模型的电阻率三维数值模拟,但面向实际应用的起伏地形下电阻率三维反演依然困难.本文基于非结构化四面体网格,并考虑到应用GPS/GNSS时,区域地球物理调查中可非规则布设测网的实际特点,实现了任意地形(平坦或起伏)条件下、任意布设的偶极-偶极视电阻率数据的不完全Gauss-Newton三维反演.合成数据的反演结果表明了方法的有效性,可应用于复杂野外环境下的三维电法勘探. 相似文献