共查询到20条相似文献，搜索用时 31 毫秒
1.
以片状颗粒成分为主的片状结构砂与常用的圆形颗粒标准石英砂相比,在物理力学特性上有显著的差异。循环荷载作用下,饱和砂土振动孔压上升会导致土体刚度发生软化,当振动孔压累积达到一定水平时,会产生液化现象,从而引起土体结构发生破坏。采用英国WFI动三轴仪,研究了南京片状细砂在循环荷载作用下,静偏应力水平、循环应力比水平和循环次数对其动应力一应变关系的影响,考虑每一次循环过程中动应力—应变关系滞回曲线的卸载及再加载割线动剪切模量Gsec和最大割线模量Gmax的变化特性,建立了动剪模量软化的经验公式;静偏应力水平对动剪模量软化有显著影响,随着循环次数的增加,动应力—应变滞回圈逐渐向应变累积方向滑移和向应变轴方向倾斜,且彼此分离;考虑循环软化特性,采用修正的Masing准则,描述了循环荷载下南京片状细砂的动应力—应变关系。 相似文献
2.
A laboratory study on the undrained dynamic behavior of saturated clays in cyclic triaxial tests with a variable confining pressure (VCP tests) is presented. Tests were performed on remolded clayey samples using a dynamic triaxial device where the deviatoric stress and confining pressure can be varied simultaneously. Various cyclic stress paths have been applied on the specimens through varying the ratios or phase differences between the cyclic deviatoric stress and cyclic confining pressure. Specifically, the stress paths used in the present study were designed to simulate the coupling effects of simultaneously varying shear and normal stresses in clays due to earthquakes and other vibration sources. Test results obtained from this study show that the undrained response of saturated clays is strongly influenced by the variation of confining pressure, in terms of pore water pressure, development speed of cyclic strain and magnitude of cyclic strength. It is found that when strong P-waves are propagating in soil layers, VCP tests are more appropriate for the simulation of in situ stress fields than the conventional cyclic triaxial tests with a constant confining pressure (CCP tests). 相似文献
3.
Pore pressure changes in a geothermal reservoir, as a result of injection and/or production of water, result in changes of stress acting on the reservoir rock and, consequently, changes in the mechanical and transport properties of the rock. Bulk modulus and permeability were measured at different pressures and temperatures. An outcropping equivalent of Rotliegend reservoir rock in the North German Basin (Flechtinger sandstone) was used to perform hydrostatic tests and steady state fluid flow tests. Permeability measurements were conducted while cycling confining pressure; the dependence of permeability on stress was determined at a constant downstream pressure of 1 MPa. Also, temperature was increased stepwise from 30 to 140 °C and crack porosity was calculated at different temperatures. Although changes in the volumes of cracks are not significant, the cracks control fluid flow pathways and, consequently, the permeability of the rock. A new model was derived which relates microstructure of porosity, the stress–strain curve, and permeability. Porosity change was described by the first derivative of the stress–strain curve. Permeability evolution was ascribed to crack closure and was related to the second derivative of the stress–strain curve. The porosity and permeability of Flechtinger sandstone were reduced by increasing the effective pressure and decreased after each pressure cycle. 相似文献
4.
Frozen soil plays an important role on the stability of railway and highway subgrade in cold regions. However, the dynamic properties of frozen soil subjected to the freeze–thaw cycles have rarely been investigated. In this study, cryogenic cyclic triaxial tests were conducted on frozen compacted sand from Nehe, Heilongjiang Province in China which was subjected to the closed-system freeze–thaw cycles. A modified Hardin hyperbolic model was suggested to describe the backbone curves. Then, dynamic shear modulus and damping ratio versus cyclic shear strain were analyzed under the different freeze–thaw cycles, temperatures, initial water contents, loading frequencies and confining pressures. The results indicate that the freeze–thaw process plays a significant effect on the dynamic shear modulus and damping ratio, which slightly change after one freeze–thaw cycle. Dynamic shear modulus increases with increasing initial water content, temperature, loading frequency and confining pressure. Damping ratio increases with increasing initial water content, while decreases with increasing temperature and loading frequency. The effect of confining pressure on the damping ratio was found not significant. Furthermore, the empirical expressions were formulated to estimate dynamic shear modulus and damping ratio of the frozen compacted sand. The results provide guidelines for evaluating the infrastructures in cold regions. 相似文献
5.
Petrophysical measurements were carried out on dry specimens of mica-gneiss, amphibolite and serpentinite from KTB core samples and samples of surface outcrops in order to determine the effect that a deviatoric stress field, as observed at the KTB area, may have on the in-situ rock properties. Simulating the variation of the actual principal stresses and temperature with depth, seismic wave velocities, densities, linear and volumetric strain (porosity) have been measured, taking into account the overall spatial orientation of the foliation at the KTB area with respect to the principal stress axes. Comparison with respective data evaluated for lithostatic pressure conditions revealed that the stress-related (crack-related) effect on wave velocities respectively on velocity anisotropy is in the range 1–3%, due to microcracks which are selectively closed or kept open by the deviatoric stress. The effect of the deviatoric stress is particularly documented by shear wave splitting due to microfractures that are oriented normal to the minimum principal stress axis. 相似文献
6.
黏土类土石混合体常作为路基填料在工程中广泛应用,然而其在交通荷载作用下的动力特性方面研究较少。为此,本文以0.05 Lc(Lc为圆柱试样直径)为土体、块石分类阈值,根据土石混合体中砾石掺量、侧限压力的不同,采用自振柱仪对其在小应变(10^-6~10^-4)下的动剪切模量和阻尼比进行研究。结果表明:土石混合体最大动剪切模量随砾石掺量的增加而不断增大,且在20%~40%掺量区间内增幅最大,随侧限压力的增加而增大,且增幅逐渐变小;在应变幅值相同的条件下,动剪切模量衰变程度随砾石掺量的增加而不断减少,且在20%~40%掺量区间内减幅最大,随侧限压力的增加而减小,且减幅逐渐变小;最小、最大阻尼比随砾石掺量和侧限压力的增加而减少。结合试验结果分别从颗粒“骨架”结构性、动态结构稳定性、材料密实度、能量耗散等方面阐述块石掺量和侧限压力对土石混合体动剪切模量和阻尼比的影响机理。最后采用优化Hardin-Drnevich模型建立砾石掺量、侧限压力与土石混合体动力特性参数(最大动剪切模量、参考剪应变、最大阻尼比、最小阻尼比)之间的估算公式,以期为土石混合路基的动力设计和施工提供指导。 相似文献
7.
土的最大动剪切模量、剪应变幅和阻尼比是对土层进行动力反应分析的重要力学参数。利用英国GDS公司生产的RCA共振柱仪,研究围压对都江堰地区粉质粘土的上述动力学参数的影响。研究表明：相同围压条件下,最大动剪切模量、剪应变幅和阻尼比随重复次数基本不变,表明该试验过程具有可重复性;最大动剪切模量、剪应变幅和阻尼比均受围压影响较大,随着围压的增大,最大动剪切模量和阻尼比均逐渐增大,而剪应变幅随着围压的增大逐渐减小。据此,建立了都江堰地区粉质粘土动力学参数随围压变化的经验公式。本研究可为土层地震动力反应分析提供参考并积累基础资料。 相似文献
8.
本文在实验室对所获取的东营地区层理发育的低孔隙度页岩和泥岩的各向异性裂纹演化特性进行了研究,获得了各向同性条件下泥页岩的力学与超声波响应特性,分析了应力幅度对于页岩声波速度和各向异性的影响.主要结论包括:(1)泥页岩在循环载荷下存在滞后效应,表明其经历了去压实或油气产生导致的超压;(2)泥岩和页岩具有不同程度的各向异性,随着各向同性压力的增高微裂隙逐渐闭合,样品的各向异性程度减弱;(3)分析了岩石韧度和裂纹损伤参数随压力的变化特征,相比泥岩,页岩各向异性程度更高,随压力变化更明显,其裂纹导致的附加各向异性更强;(4)分析了各向异性岩石的动态弹性模量特征,由于软裂隙空间的闭合,动态弹性模量在低压条件下都随着围压的增加有硬化趋势. 相似文献
9.
10.
利用GCTS共振柱测试仪研究了干密度和固结压力对固原黄土重塑土动剪切模量和阻尼比的影响及试验数据误差的基本规律。通过设计不同工况的试验条件,对比分析结果表明:相同含水率条件下,最大动剪切模量G_(dmax)随固结压力和干密度的增大而增大。相同干密度条件下,黄土的动剪切模量比随围压的增大而增大;阻尼比随围压的增大而减小;相同围压条件下,黄土动剪切模量比随干密度的增大而增大,阻尼比随干密度的增大而减小;不同剪应变特征点的动剪切模量比和阻尼比试验数据呈现一定的离散性,且离散程度阻尼比明显高于动剪切模量比。研究成果可为该地区场地地震反应分析及工程建设提供基础资料。 相似文献
11.
Finite element modelling for water waves-soil interaction 总被引：1，自引：0，他引：1
The soil permeability and shear modulus of many marine sediments vary with depth because of consolidation under overburden pressure. However, conventional theories for wave-induced soil response have assumed a homogeneous porous seabed, with constant soil permeability and shear modulus. This paper presents a finite element model for the wave-induced soil response in a porous seabed, with variable permeability and shear modulus as a function of burial depth. The soil matrix considered here is unsaturated and hydraulically anisotropic, and subjected to a three-dimensional short-crested wave system. The present finite element formulation is established by using a combination of semi-analytical techniques and the Galerkin method. The nodal effective stresses directly derived from the governing equations can be calculated accurately in the present model. Verification is available through the reduction to the simple case of homogeneous seabed. Three typical marine materials, course, fine sand and gravel, are considered in this study. The numerical results indicate that the soil permeability affects the wave-induced seabed response significantly especially for gravelled seabed, as does the soil shear modulus for sandy seabed. 相似文献
12.
Experimental investigations and modeling of nonlinear elasticity of fiber-reinforced soil under cyclic loading at small strain are conducted in this paper. The investigations include three aspects. First, cyclic shear tests are conducted using conventional triaxial apparatus. Twenty-seven specimens with three different fiber contents are employed to conduct triaxial cyclic shear tests under different confining pressure and loading repetition. Effects of geofiber, confining pressure and loading repetition on elastic shear modulus of reinforced soil are studied and analyzed. Second, a hyperbolic function is introduced to describe the nonlinear stress–strain skeletal curve under cyclic loading. Nonlinear elastic modulus is expressed as a function of shear strain and two variables A and B that are related to the initial tangential modulus and ultimate cyclic loading stress, respectively. In the present paper, variables A and B both are further assumed to be functions of geofiber content, confining pressure and loading repetition. Finally, eight constitutive coefficients of the nonlinear elastic model are calibrated using stress–strain curves from cyclic triaxial shear tests. The calibration of parameters is conducted using the technique of the linear regression for multiple variables. Impacts and effects of geofiber, confining pressure and loading repetitions on soil nonlinear elastic behavior are discussed. 相似文献
13.
A. Schubnel O. Nishizawa K. Masuda X. J. Lei Z. Xue Y. Guégen 《Pure and Applied Geophysics》2003,160(5-6):869-887
— A set of experiments on four samples of Oshima Granite at 15, 40 and 60 MPa confining pressure have been performed in order to investigate the damage behavior of granite submitted to deviatoric stress. In addition an experiment on one sample of Toki Granite at 40 MPa confining pressure was performed, in order to compare and elucidate the structural effects. Using acoustic emission data, strain measurements and elastic wave velocities allow to define consistently a damage domain in the stress space. In this domain, microcracking develops. The microcracking process is, in a first stage, homogeneous and, close to failure, localized. Elastic wave velocities decrease in the damage domain and elastic anisotropy develops. Using Kachanov's model (1993), elastic wave velocities have been inverted to derive the full second-order crack density tensor and characterize the fluid saturation state from the fourth-order crack density tensor. Crack density is strongly anisotropic and the total crack density close to failure slightly above one. The results indicate that the rock is saturated in agreement with the experimental conditions. The model is thus shown to be very appropriate to infer from elastic wave velocities a complete quantitative characterization of the damaged rock. 相似文献
14.
青藏铁路重塑冻结粉质黏土动剪切模量试验研究 总被引：3，自引：0，他引：3
通过低温动三轴试验,研究青藏铁路中重塑冻结粉质黏土的动剪切模量的变化规律及其主要因素。研究表明,冻土的最大动剪切模量随负温降低而显著增大,动剪切模量比随轴向荷载单级振次增加而有所增大,随负温降低而降低,随围压增加趋于一致。负温是冻土动力性能的一个极其重要的影响因素,因而寒区工程应引起足够的重视。研究结果对于合理认识冻土动力性能具有一定意义,也为进一步开展多年冻土场地工程地震安全性评价积累部分基础资料。 相似文献
15.
Many observations and studies indicate that pore fluid pressure in the crustal rocks plays an important role in deformation, faulting, and earthquake processes. Conventional models of pore pressure effects often assume isotropic porous rocks and yield the nondeviatoric pressure effects which seem insufficient to explain diverse phenomena related to pore pressure variation, such as fluid-extraction induced seismicity and crustal weak faults. We derive the anisotropic effective stress law especially for transversely-isotropic and orthotropic rocks, and propose that the deviatoric effects of pore fluid pressure in anisotropic rocks not only affect rock effective strength but also cause variation of shear stresses. Such shear stress variations induced by either pore pressure buildup or pore pressure decline may lead to faulting instability and trigger earthquakes, and provide mechanisms for the failure of crustal weak faults with low level of shear stresses. We believe that the deviatoric effects of pore fluid pressure in anisotropic rocks are of wide application in studies of earthquake precursors and aftershocks, oil and gas reservoir characterization, enhanced oil recovery, and hydraulic fracturing. 相似文献
16.
A Study of Permeability Changes Due to Cold Fluid Circulation in Fractured Geothermal Reservoirs 
下载免费PDF全文
下载免费PDF全文 Reservoir behavior due to injection and circulation of cold fluid is studied with a shear displacement model based on the distributed dislocation technique, in a poro‐thermoelastic environment. The approach is applied to a selected volume of Soultz geothermal reservoir at a depth range of 3600 to 3700 m. Permeability enhancement and geothermal potential of Soultz geothermal reservoir are assessed over a stimulation period of 3 months and a fluid circulation period of 14 years. This study—by shedding light onto another source of uncertainty—points toward a special role for the fracture surface asperities in predicting the shear dilation of fractures. It was also observed that thermal stress has a significant impact on changing the reservoir stress field. The effect of thermal stresses on reservoir behavior is more evident over longer circulation term as the rock matrix temperature is significantly lowered. Change in the fracture permeability due to the thermal stresses can also lead to the short circuiting between the injection and production wells which in turn decreases the produced fluid temperature significantly. The effect of thermal stress persists during the whole circulation period as it has significant impact on the continuous increase in the flow rate due to improved permeability over the circulation period. In the current study, taking into account the thermal stress resulted in a decrease of about 7 °C in predicted produced fluid temperature after 14 years of cold fluid circulation; a difference which notably influences the potential prediction of an enhanced geothermal system. 相似文献
17.
18.
Shear modulus and damping ratio of grouted sand 总被引：2，自引：0，他引：2
Estelle Delfosse-Ribay Irini Djeran-Maigre Richard Cabrillac Daniel Gouvenot 《Soil Dynamics and Earthquake Engineering》2004,24(6):461-471
An experimental comparative study of three different grouted sands in terms of their effects on the values of two dynamic properties is presented. The dynamic properties studied are the shear modulus and the damping ratio which are determined with resonant column tests and cyclic triaxial tests. The behaviour of a pure Fontainebleau sand is compared with the behaviour of a Fontainebleau sand grouted with a silicate grout, a micro-fine cement grout and a mineral grout. The effects of the grouting treatment, the type of grout, the confining pressure, and the strains, on the shear modulus and the damping ratio are studied. The test results have shown that grouting improves the stiffness of the sand especially for small strains. Whatever the type of material, confining stress improves the shear modulus whereas it has a negligible effect on the damping ratio. When strain increases, the shear modulus decreases and the damping ratio increases. 相似文献
19.
Jerome B. Johnson 《水文研究》2004,18(1):53-64
A theory of pressure sensor response in snow is derived and used to examine the sources of measurement errors in snow water equivalent (SWE) pressure sensors. Measurement errors in SWE are caused by differences in the compressibility of the pressure sensor and the adjacent snow layer, which produces a shear stress along the perimeter of the sensor. When the temperature at the base of the snow cover equals 0 °C, differences in the snowmelt rate between the snow–SWE sensor interface and the adjacent snow–soil interface may also produce a shear stress along the sensor's perimeter. This shear stress perturbs the pressure field over the sensor, producing SWE measurement errors. Snow creep acts to reduce shear stresses along the SWE sensor's perimeter at a rate that is inversely proportional to the snow viscosity. For sustained periods of differential snowmelt, a difference in the mass of snow over the sensor compared with the surrounding soil will develop, producing additional permanent errors in SWE measurements. The theory indicates that SWE pressure sensor performance can be improved by designing a sensor with a high Young's modulus (low compressibility), low aspect ratio, large diameter and thermal properties that match those of the surrounding soil. Simulations of SWE pressure sensor errors using the theory are in close agreement with observed errors and may provide a means to correct historical SWE measurements for use in hydrological hindcast or climate studies. Published in 2003 by John Wiley & Sons, Ltd. 相似文献
20.
在实验室中研究了蛇纹岩和角闪岩样品在不同温压条件下的纵、横波速度和Q值．这两种岩样对应的主要组成矿物叶蛇纹石和普通角闪石都具有很强的晶格优选方位（LPO）．随着围压的增加,波速和Q值均增大,但是在相互正交的三个方向上（垂直或平行于层理面及线理方向）增大的速度并不相同,这与微裂隙的逐渐闭合密切相关．在600MPa的围压下升高温度直到600℃以上,由于微裂隙的热扩张受到约束,波速和Q值下降幅度很小．观测到的波速和Q值的各向异性具有不同的机理,波速各向异性主要与定向分布的微裂隙和主要矿物的LPO等构造因素有关;高围压下纵波Q值各向异性与速度各向异性正好相反,可能是由于形成层理面的定向排列的平板状矿物晶体沿不同方向边界之间接触程度不同造成的． 相似文献