首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 671 毫秒
1.
Hans Van de Vyver 《水文研究》2018,32(11):1635-1647
Rainfall intensity–duration–frequency (IDF) curves are a standard tool in urban water resources engineering and management. They express how return levels of extreme rainfall intensity vary with duration. The simple scaling property of extreme rainfall intensity, with respect to duration, determines the form of IDF relationships. It is supposed that the annual maximum intensity follows the generalized extreme value (GEV) distribution. As well known, for simple scaling processes, the location parameter and scale parameter of the GEV distribution obey a power law with the same exponent. Although, the simple scaling hypothesis is commonly used as a suitable working assumption, the multiscaling approach provides a more general framework. We present a new IDF relationship that has been formulated on the basis of the multiscaling property. It turns out that the GEV parameters (location and scale) have a different scaling exponent. Next, we apply a Bayesian framework to estimate the multiscaling GEV model and to choose the most appropriate model. It is shown that the model performance increases when using the multiscaling approach. The new model for IDF curves reproduces the data very well and has a reasonable degree of complexity without overfitting on the data.  相似文献   

2.
Abstract

Southern Ontario, Canada, has been impacted in recent years by many heavy rainfall and flooding events that have exceeded existing historical estimates of infrastructure design rainfall intensity–duration–frequency (IDF) values. These recent events and the limited number of short-duration recording raingauges have prompted the need to research the climatology of heavy rainfall events within the study area, review the existing design IDF methodologies, and evaluate alternative approaches to traditional point-based heavy rainfall IDF curves, such as regional IDF design values. The use of additional data and the regional frequency analysis methodology were explored for the study area, with the objective of validating identified clusters or homogeneous regions of extreme rainfall amounts through Ward's method. As the results illustrate, nine homogeneous regions were identified in Southern Ontario using the annual maximum series (AMS) for daily and 24-h rainfall data from climate and rate-of-rainfall or tipping bucket raingauge (TBRG) stations, respectively. In most cases, the generalized extreme value and logistic distributions were identified as the statistical distributions that provide the best fit for the 24-h and sub-daily rainfall data in the study area. A connection was observed between extreme rainfall variability, temporal scale of heavy rainfall events and location of each homogeneous region. Moreover, the analysis indicated that scaling factors cannot be used reliably to estimate sub-daily and sub-hourly values from 24- and 1-h data in Southern Ontario.

Citation Paixao, E., Auld, H., Mirza, M.M.Q., Klaassen, J. & Shephard, M.W. (2011) Regionalization of heavy rainfall to improve climatic design values for infrastructure: case study in Southern Ontario, Canada. Hydrol. Sci. J. 56(7), 1067–1089.  相似文献   

3.
The regional frequency analysis of extreme annual rainfall data is a useful methodology in hydrology to obtain certain quantile values when no long data series are available. The most crucial step in the analysis is the grouping of sites into homogeneous regions. This work presents a new grouping criterion based on some multifractal properties of rainfall data. For this purpose, a regional frequency analysis of extreme annual rainfall data from the Maule Region (Chile) has been performed. Daily rainfall data series of 53 available stations have been studied, and their empirical moments scaling exponent functions K(q) have been obtained. Two characteristics parameters of the K(q) functions (γmax and K(0)) have been used to group the stations into three homogeneous regions. Only five sites have not been possible to include into any homogenous regions, being the local frequency analysis of extreme daily rainfall the most appropriate method to be used at these locations. Copyright © 2014 John Wiley & Sons, Ltd.  相似文献   

4.
Most of meteorological stations in Chile register rainfall amounts once every 24 h. The creation of intensity–duration–frequency (IDF) curves requires continuous recorded data, and this insufficiency of proper instrumentation has resulted in a lack of IDF curves nationwide. The objective of this study is to further develop and evaluate the feasibility of a new method to estimate IDF curves in ungauged stations under Mediterranean climates of central Chile. A technique used to address this problem is the use of a storm index (SI), also known as the ‘K’ method, which allows the construction of IDF curves from stations with discontinuous data, by extrapolating data from stations with continuous records, as long as daily rainfall intensities for both stations differ by less than 2 mm h?1. To test the applicability of this method, SI values were calculated for 40 meteorological stations located throughout Central Chile (latitudes 30°S to 40°S). The extrapolated IDF curves were then compared with observed data, and the goodness of fit was determined. The results indicate that the storm index method can adequately estimate hourly IDF curve values for stations lacking of continuous rainfall data. Copyright © 2014 John Wiley & Sons, Ltd.  相似文献   

5.
ABSTRACT

Downscaling of climate projections is the most adapted method to assess the impacts of climate change at regional and local scales. This study utilized both spatial and temporal downscaling approaches to develop intensity–duration–frequency (IDF) relations for sub-daily rainfall extremes in the Perth airport area. A multiple regression-based statistical downscaling model tool was used for spatial downscaling of daily rainfall using general circulation models (GCMs) (Hadley Centre’s GCM and Canadian Global Climate Model) climate variables. A simple scaling regime was identified for 30 minutes to 24 hours duration of observed annual maximum (AM) rainfall. Then, statistical properties of sub-daily AM rainfall were estimated by scaling an invariant model based on the generalized extreme value distribution. RMSE, Nash-Sutcliffe efficiency coefficient and percentage bias values were estimated to check the accuracy of downscaled sub-daily rainfall. This proved the capability of the proposed approach in developing a linkage between large-scale GCM daily variables and extreme sub-daily rainfall events at a given location. Finally IDF curves were developed for future periods, which show similar extreme rainfall decreasing trends for the 2020s, 2050s and 2080s for both GCMs.
Editor M.C. Acreman; Associate editor S. Kanae  相似文献   

6.
A simulation experiment for optimal design hyetograph selection   总被引：1，自引：0，他引：1  
The aim of this work is to assess the accuracy of literature design hyetographs for the evaluation of peak discharges during flood events. Five design hyetographs are examined in a set of simulations, based upon the following steps: (i) an ideal river basin is defined, characterized by a Beta distribution shaped unit hydrograph (UH); (ii) 1000 years of synthetic rainfall are artificially generated; (iii) a discharge time‐series is obtained from the convolution of the rainfall time‐series and the UH, and the reference T‐years flood is computed from this series; (iv) for the same return period T, the parameters of the intensity–duration–frequency (IDF) curve are estimated from the 1000 years of synthetic rainfall; (v) five design hyetographs are determined from the IDF curves and are convolved with the discrete UH to find the corresponding design hydrographs; (vi) the hydrograph peaks are compared with the reference T‐years flood and the advantages and drawbacks of each of the five approaches are evaluated. The rainfall and UH parameters are varied, and the whole procedure is repeated to assess the sensitivity of results to the system configuration. We found that all design hyetographs produce flood peak estimates that are consistently biased in most of the climatic and hydrologic conditions considered. In particular, significant underestimation of the design flood results from the adoption of any rectangular hyetograph used in the context of the rational formula. In contrast, the Chicago hyetograph tends to overestimate peak flows. In two cases it is sufficient to multiply the result by a constant scaling factor to obtain robust and nearly unbiased estimates of the design floods. Copyright © 2007 John Wiley & Sons, Ltd.  相似文献   

7.
Establishing the rainfall intensity–duration–frequency (IDF) relations by the conventional method, the use of parametric distribution models has the advantage of automatic compliance of monotonicity condition of rainfall intensity and frequency. However, fitting rainfall data to a distribution separately by individual duration may possibly produce undulation and crossover of IDF curves which does not comply physical reality. This frequently occurs when rainfall record length is relatively short which often is the case. To tackle this problem this study presents a methodological framework that integrates the third-order polynomial normal transform (TPNT) with the least squares (LS) method to establish rainfall IDF relations by simultaneously considering multi-duration rainfall data. The constraints to preserve the monotonicity and non-crossover in the IDF relations can be incorporated easily in the LS-based TPNT framework. Hourly rainfall data at Zhongli rain gauge station in Taiwan with 27-year record are used to establish rainfall IDF relations and to illustrate the proposed methodology. Numerical investigation indicates that the undulation and crossover behavior of IDF curves can be effectively circumvented by the proposed approach to establish reasonable IDF relations.  相似文献   

8.
A rainfall intensity–duration–frequency (IDF) relationship was generated by pooling annual maximum rainfall series from 14 recording rain gauges in southern Taiwan. Dimensionless frequency curves, plotted by the growth curve method, can be well fitted by regression equations for a duration ranging from 10 mins to 24 hours. As the parameters in regression equations have a good statistical relationship with average annual rainfall, a generalized regional IDF formula was then formulated. The formula, based on average annual rainfall as an index, can be easily applied to non-recording rain gauges. This paper further applies the mean value first-order second moment (MFOSM) method to estimate the uncertainty of the proposed regional IDF formula. From a stochastic viewpoint, the generalized regional IDF formula can accurately simulate the IDF relationship developed using frequency analysis (EV1) at individual stations. The method can provide both rainfall intensity and variance isohyetal maps for various rainfall durations and return periods over the study area. © 1998 John Wiley & Sons, Ltd.  相似文献   

9.
Rainfall intensity–duration–frequency (IDF) relationships describe rainfall intensity as a function of duration and return period, and they are significant for water resources planning, as well as for the design of hydraulic constructions. In this study, the two‐parameter lognormal (LN2) and Gumbel distributions are used as parent distribution functions. Derivation of the IDF relationship by this approach is quite simple, because it only requires an appropriate function of the mean of annual maximum rainfall intensity as a function of rainfall duration. It is shown that the monotonic temporal trend in the mean rainfall intensity can successfully be described by this parametric function which comprises a combination of the parameters of the quantile function a(T) and completely the duration function b(d) of the separable IDF relationship. In the case study of Aegean Region (Turkey), the IDF relationships derived through this simple generalization procedure (SGP) may produce IDF relationships as successfully as does the well‐known robust estimation procedure (REP), which is based on minimization of the nonparametric Kruskal–Wallis test statistic with respect to the parameters θ and η of the duration function. Because the approach proposed herein is based on lower‐order sample statistics, risks and uncertainties arising from sampling errors in higher‐order sample statistics were significantly reduced. The authors recommend to establish the separable IDF relationships by the SGP for a statistically favorable two‐parameter parent distribution, because it uses the same assumptions as the REP does, it maintains the observed temporal trend in the mean additionally, it is easy to handle analytically and requires considerably less computational effort. Copyright © 2012 John Wiley & Sons, Ltd.  相似文献   

10.
Estimation of design rainfall intensity is crucial for design and planning of water resources engineering projects. The intent of the present study is to develop regional IDF curves for Tehri-Garhwal Himalayan region in India, wherein numbers of hydropower projects are in planning and execution stage. Self Recording Rain Gauge (SRRG) stations are generally not so frequent in the project locations. Under this situation, the engineers are forced to use regional intensity duration frequency (IDF) curves. Under this study, four stations viz. Tehri M.T.Lab, Mukhim, Pilkhi and Dhuttu were available with SRRG data. These data are used to develop the regional IDF curve for entire Tehri-Garwal region. After selection of the most intensive storms, return periods has been determined using regionalized L-moment method. After developing IDF curves for above four raingauge stations, Thiessen Ploygon method is applied to find out average IDF curve. To show the spatial variability, Isopluvial maps have been generated using ArcGIS and a relation equation has been developed.  相似文献   

11.
Abstract

Intensity–Duration–Frequency (IDF) curves for precipitation constitute a probabilistic tool and have proven useful in water resources management. In particular, IDF curves for precipitation enable questions on the extreme character of precipitation to be answered. The construction of IDF curves for precipitation is difficult or impossible in tropical areas due to the lack of long-term extreme precipitation data. A technique is proposed to overcome this shortcoming by combining limited high-frequency information on rainfall extremes with long-term daily rainfall information. It may be regarded as an extension of Koutsoyiannis' approach. Using this technique, IDF curves for precipitation are produced for Lubumbashi in Congo.

Citation Van de Vyver, H. & Demarée, G. R. (2010) Construction of Intensity–Duration–Frequency (IDF) curves for precipitation at Lubumbashi, Congo, under the hypothesis of inadequate data. Hydrol. Sci. J. 55(4), 555–564.  相似文献   

12.
Constrained scaling approach for design rainfall estimation   总被引：1，自引：1，他引：0  
Rainfall depth (or intensity) of the same frequency should follow a non-decreasing relationship with rainfall duration. However, due to the use of finite samples and sampling error, rainfall frequency analysis could yield rainfall intensity (depth)–frequency (IDF, DDF) curves of different durations that might intersect among them. Results of this kind violate physical reality and it is more likely to occur when rainfall record length gets shorter. To ensure the compliance of the physical reality, this paper applied the scale-invariant approach, in conjunction with constrained regression analysis, to circumvent intersections in rainfall IDF or DDF curves. Rainfall data of various durations at rain gauge in Hong Kong are used to demonstrate the procedure. Numerical investigation indicates that the proposed procedure yields more reasonable results than those based on the conventional frequency analysis, especially when only a small sample of data are available.  相似文献   

13.
Maximum rainfall intensity–duration–frequency (IDF) curves are commonly applied to determine the design rainfall in water resource projects. Normally, the IDF relationship is derived from recording rain gauges. As the network of non-recording rain gauges (daily rainfall) in Taiwan has a higher density than recording rain gauges, attempts were made in this study to extend the IDF relationship to non-recording rain gauges. Eighteen recording rain gauges and 99 non-recording rain gauges over the Chi-Nan area in Southern Taiwan provide the data sets. The regional IDF formulae were generated for ungauged areas to estimate rainfall intensity for various return periods and rainfall durations larger than or equal to one hour. For rainfall durations less than one hour, a set of adjustment formulae were applied to modify the regional IDF formulae. The method proposed in this study had reasonable application to non-recording rain gauges, which was concluded from the verification of four additional recording rain gauges. © 1997 John Wiley & Sons, Ltd.  相似文献   

14.
Rainfall erosivity represents the primary driver for particle detachment in splash soil erosion. Several raindrop erosivity indices have been developed in order to quantify the potential of rainfall to cause soil erosion. Different types of rainfall simulators have been used to relate rainfall characteristics to soil detachment. However, rainfall produced by different rainfall simulators has different characteristics, specifically different relationships between rainfall intensity and rainfall erosivity. For this reason, the effect of rainfall characteristics produced by a dripper‐type rainfall simulator on splash soil erosion (Ds) has been investigated. The simulated rainfall kinetic energy (KE) and drop size distribution (DSD) were measured using piezoelectric transducers, modified from the Vaisala RAINCAP® rain sensor. The soil splash was evaluated under various simulated rainfall intensities ranging from 10 to 100 mm h?1 using the splash‐cup method. The simulated rainfall intensity (I) and kinetic energy relationship (I–KE) was found to be different from natural rainfall. The simulated rainfall intensity and splash soil erosion relationship (I–Ds) also followed this same trend. The I–KE relationship was found to follow the natural rainfall trend until the rainfall intensity reached 30 mm h?1 and above this limit the KE started to decrease. This emphasizes the importance of the I–KE relationship in determining the I‐Ds relationship, which can differ from one rainfall simulator to another. Ds was found to be highly correlated with KE (r = 0·85, P < 0·001), when data produced by the rainfall intensity ranged from 10 to 100 mm h?1. However, when the threshold rainfall intensity (30 mm h?1) was considered, the correlation coefficient further improved (r = 0·89, P = 0·001). Accordingly, to improve the soil splash estimation of simulated rainfall under various rainfall intensities the I–KE characterization relationship for rainfall simulators has to be taken into account. Copyright © 2010 John Wiley & Sons, Ltd.  相似文献   

15.
Hydrologic engineering designs and analyses often require the specification of design storm which involves rainfall amount, duration and hyetograph. In practice, the determination of design rainfall in hydrologic engineering applications involves the frequency analysis of extreme rainfalls of different durations and the establishment of rainfall hyetograph for the design event under consideration. Sampling errors exist in the estimation of rainfall depth (or intensity) quantiles from frequency analysis, which will be transmitted in the process of determining the design rainfall hyetograph. This paper presents a practical methodological framework based on the bootstrap resampling scheme to assess the uncertainty features associated with the magnitude of estimated rainfall depth/intensity quantiles and the corresponding design hyetographs. The procedure is implemented to quantify uncertainty of design rainfall hyetograph following the Stormwater Drainage Manual of Hong Kong involving the use of rainfall intensity–duration–frequency (IDF) model. Of particular interesting is that the bootstrap resampling scheme implemented herein is modified to handle unequal record period of annual maximum rainfall data series of different durations and to account for their intrinsic correlations. According to the adopted rainfall IDF model, the design rainfall hyetograph is a function of the IDF model coefficients. Due to the correlation among rainfall quantiles of different durations, the IDF coefficients are found to be strongly related in a nonlinear fashion which should not be ignored in the establishment of the design hyetographs.  相似文献   

16.
Gerard Govers  Jan Diels 《水文研究》2013,27(25):3777-3790
Experimental work has clearly shown that the effective hydraulic conductivity (Ke) or effective infiltration rate (fe) on the local scale of a plot cannot be considered as constant but are dependent on water depth and rainfall intensity because non‐random microtopography‐related variations in hydraulic conductivity occur. Rainfall–runoff models generally do not account for this: models assume that excess water is uniformly spread over the soil surface and within‐plot variations are neglected. In the present study, we propose a model that is based on the concepts of microtopography‐related water depth‐dependent infiltration and partial contributing area. Expressions for the plot scale Ke and fe were developed that depend on rainfall intensity and runon from upslope (and thus on water depth). To calibrate and validate the model, steady state infiltration experiments were conducted on maize fields on silt loam soils in Belgium, with different stages and combinations of rainfall intensity and inflow, simulating rainfall and runon. Water depth–discharge and depth–inundation relationships were established and used to estimate the effect of inundation on Ke. Although inflow‐only experiments were found to be unsuitable for calibration, the model was successfully calibrated and validated with the rainfall simulation data and combined rainfall–runon data (R²: 0.43–0.91). Calibrated and validated with steady state infiltration experiments, the model was combined with the Green–Ampt infiltration equation and can be applied within a two‐dimensional distributed rainfall–runoff model. The effect of water depth–dependency and rainfall intensity on infiltration was illustrated for a hillslope. Copyright © 2012 John Wiley & Sons, Ltd.  相似文献   

17.
A multi-parametric study of empirical relationships between macroseismic data and magnitude is presented for the Italian region by the analysis of a new extended data set concerning 146 earthquakes. The available magnitude determinations include all of the most intense earthquakes which occurred in Italy in the last century and have been obtained by an accurate revision of original instrumental data. Intensity data have been revised and upgraded on the basis of the most recent studies: only local intensities directly documented have been used. Macroseismic determinations ofM s ,m B andM wa magnitudes have been performed. The empirical relationships between maximum felt intensity (I max ) and magnitude have been determined by the use of a distribution-free approach and a linear regression analysis. This last parameterization allows for the explanation of more than 60% of the variation in magnitude. In order to improve these results, the linear dependence between magnitude,I max and average distances (in logarithm) corresponding to fixed attenuation values has been explored. The comparison between instrumental magnitudes and corresponding macroseismic estimates obtained from empirical relationships shows that the respective uncertainties are comparable.  相似文献   

18.
Optimal designs of stormwater systems rely very much on the rainfall Intensity–Duration–Frequency (IDF) curves. As climate has shown significant changes in rainfall characteristics in many regions, the adequacy of the existing IDF curves is called for particularly when the rainfall are much more intense. For data sparse sites/regions, developing IDF curves for the future climate is even challenging. The current practice for such regions is, for example, to ‘borrow’ or ‘interpolate’ data from regions of climatologically similar characteristics. A novel (3‐step) Downscaling‐Comparison‐Derivation (DCD) approach was presented in the earlier study to derive IDF curves for present climate using the extracted Dynamically Downscaled data an ungauged site, Darmaga Station in Java Island, Indonesia and the approach works extremely well. In this study, a well validated (3‐step) DCD approach was applied to develop present‐day IDF curves at stations with short or no rainfall record. This paper presents a new approach in which data are extracted from a high spatial resolution Regional Climate Model (RCM; 30 × 30 km over the study domain) driven by Reanalysis data. A site in Java, Indonesia, is selected to demonstrate the application of this approach. Extremes from projected rainfall (6‐hourly results; ERA40 Reanalysis) are first used to derive IDF curves for three sites (meteorological stations) where IDF curves exist; biases observed resulting from these sites are captured and serve as very useful information in the derivation of present‐day IDF curves for sites with short or no rainfall record. The final product of the present‐day climate‐derived IDF curves fall within a specific range, +38% to +45%. This range allows designers to decide on a value within the lower and upper bounds, normally subjected to engineering, economic, social and environmental concerns. Deriving future IDF curves for Stations with existing IDF curves and ungauged sites with simulation data from RCM driven by global climate model (GCM ECHAM5) (6‐hourly results; A2 emission scenario) have also been presented. The proposed approach can be extended to other emission scenarios so that a bandwidth of uncertainties can be assessed to create appropriate and effective adaptation strategies/measures to address climate change and its impacts. Copyright © 2013 John Wiley & Sons, Ltd.  相似文献   

19.
The goal of quantile regression is to estimate conditional quantiles for specified values of quantile probability using linear or nonlinear regression equations. These estimates are prone to “quantile crossing”, where regression predictions for different quantile probabilities do not increase as probability increases. In the context of the environmental sciences, this could, for example, lead to estimates of the magnitude of a 10-year return period rainstorm that exceed the 20-year storm, or similar nonphysical results. This problem, as well as the potential for overfitting, is exacerbated for small to moderate sample sizes and for nonlinear quantile regression models. As a remedy, this study introduces a novel nonlinear quantile regression model, the monotone composite quantile regression neural network (MCQRNN), that (1) simultaneously estimates multiple non-crossing, nonlinear conditional quantile functions; (2) allows for optional monotonicity, positivity/non-negativity, and generalized additive model constraints; and (3) can be adapted to estimate standard least-squares regression and non-crossing expectile regression functions. First, the MCQRNN model is evaluated on synthetic data from multiple functions and error distributions using Monte Carlo simulations. MCQRNN outperforms the benchmark models, especially for non-normal error distributions. Next, the MCQRNN model is applied to real-world climate data by estimating rainfall Intensity–Duration–Frequency (IDF) curves at locations in Canada. IDF curves summarize the relationship between the intensity and occurrence frequency of extreme rainfall over storm durations ranging from minutes to a day. Because annual maximum rainfall intensity is a non-negative quantity that should increase monotonically as the occurrence frequency and storm duration decrease, monotonicity and non-negativity constraints are key constraints in IDF curve estimation. In comparison to standard QRNN models, the ability of the MCQRNN model to incorporate these constraints, in addition to non-crossing, leads to more robust and realistic estimates of extreme rainfall.  相似文献   

20.
The correct use of the tension disc infiltrometer requires the membrane of the disc base to be completely in contact with the soil surface. To achieve this contact, a thick layer of sand is commonly placed between the soil surface and the disc base. This paper presents an alternative disc (MDB), which, by incorporating a malleable membrane, allows direct infiltration measurements without using a contact sand layer. Infiltration curves obtained with this new design in a soil under three different tillage management treatments were compared with the corresponding curves obtained with a conventional disc (CDB) that uses a contact sand layer. The cumulative infiltration curves measured with CDB were analysed by the differentiated linearization (DL) method, and the corresponding curves obtained with MDB were analysed using both the DL and the cumulative linearization (CL) models. The values of hydraulic conductivity (K0) and sorptivity (S0) estimated with CDB were also compared with those obtained with MDB. Finally, the cumulative infiltration curves measured with CDB and MDB were compared with the corresponding modelled function for the respective K0 and S0 values calculated with the CL and DL models. The results show that, compared with CDB without a contact sand layer, MDB allows complete soil surface wetting even when non‐smoothed soil surfaces are used. The CDB, which yielded average K0 values 18% lower than those estimated with MDB, gave the highest values of standard error for the hydraulic parameters calculated. Furthermore, the subjective method employed in the CDB‐DL technique, which requires the first points of the differential infiltration line corresponding to the sand layer to be manually removed, introduces additional uncertainties in estimating S0 and K0. Comparison between the modelled and measured infiltration curves demonstrates that the DL or CL methods applied to MDB gave excellent estimates of S0 and K0. Copyright © 2012 John Wiley & Sons, Ltd.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号