共查询到20条相似文献，搜索用时 109 毫秒
1.
Current structural analysis software programs offer few if any applicable device-specifi c hysteresis rules or nonlinear elements to simulate the precise mechanical behavior of a multiple friction pendulum system(MFPS) with numerous sliding interfaces.Based on the concept of subsystems,an equivalent series system that adopts existing nonlinear elements with parameters systematically calculated and mathematically proven through rigorous derivations is proposed.The aim is to simulate the characteristics of sliding motions for an MFPS isolation system with numerous concave sliding interfaces without prior knowledge of detailed information on the mobilized forces at various sliding stages.An MFPS with numerous concave sliding interfaces and one articulated or rigid slider located between these interfaces is divided into two subsystems: the fi rst represents the concave sliding interfaces above the slider,and the second represents those below the slider.The equivalent series system for the entire system is then obtained by connecting those for each subsystem in series.The equivalent series system is validated by comparing numerical results for an MFPS with four sliding interfaces obtained from the proposed method with those from a previous study by Fenz and Constantinou.Furthermore,these numerical results demonstrate that an MFPS isolator with numerous concave sliding interfaces,which may have any number of sliding interfaces,is a good isolation device to protect structures from earthquake damage through appropriate designs with controllable mechanisms. 相似文献
2.
Seismic safety of high concrete dams 总被引：2，自引：1，他引：1
Peak ground acceleration(PGA) estimation is an important task in earthquake engineering practice.One of the most well-known models is the Boore-Joyner-Fumal formula,which estimates the PGA using the moment magnitude,the site-to-fault distance and the site foundation properties.In the present study,the complexity for this formula and the homogeneity assumption for the prediction-error variance are investigated and an effi ciency-robustness balanced formula is proposed.For this purpose,a reduced-order Monte Carlo simulation algorithm for Bayesian model class selection is presented to obtain the most suitable predictive formula and prediction-error model for the seismic attenuation relationship.In this approach,each model class(a predictive formula with a prediction-error model) is evaluated according to its plausibility given the data.The one with the highest plausibility is robust since it possesses the optimal balance between the data fi tting capability and the sensitivity to noise.A database of strong ground motion records in the Tangshan region of China is obtained from the China Earthquake Data Center for the analysis.The optimal predictive formula is proposed based on this database.It is shown that the proposed formula with heterogeneous prediction-error variance is much simpler than the attenuation model suggested by Boore,Joyner and Fumal(1993). 相似文献
3.
Yantong FENG Wen ZHANG Zhaochu HU Yongsheng LIU Tao LUO Tao HE Hong LIU Kun YU 《中国科学:地球科学(英文版)》2022,65(1):182-196
We proposed a new laser analytical mode,which used the high-frequency laser ablation to deliberately obtain the peak-shape signal profile,combined with the linear regression calibration(LRC)method to calculate elemental or isotopic ratios.In order to assess the performance of the new laser analytical mode for the application in the field of earth science,we systematically investigated the elemental quantitative analysis with high spatial resolution(10μm),rapid U-Pb dating in zircons and accurate Sr-Hf isotope analysis in geological samples.The new high-frequency laser analysis technology(20 Hz,100 pulses)reduced the limit of detection(LOD)of 25 elements to 0.005-0.16μg g-1 with crater diameters of 10μm,which are significantly lower(decrease to 2-20%)than previous researches.The quantitative analysis of five silicate glass reference materials showed that the precision and accuracy of the 25 trace elements(with the concentration ranging from 0.17 to 683μg g-1)were better than 16% and 15%,respectively.The new methods raised the analytical throughput of zircon U-Pb dating,Sr isotope ratios and Hf isotope ratios to 250 analyses per hour,144 analyses per hour and 120 analyses per hour in theory,while the analytical accuracy and precision were not affected.The detailed investigations showed that the proposed new laser analytical mode has good application effects in the field of earth sciences. 相似文献
4.
The column-to-beam flexural strength ratio(CBFSR)has been used in many seismic codes to achieve the strong column-weak beam(SCWB)failure mode in reinforced concrete(RC)frames,in which plastic hinges appear earlier in beams than in columns.However,seismic investigations show that the required limit of CBFSR in seismic codes usually cannot achieve the SCWB failure mode under strong earthquakes.This study investigates the failure modes of RC frames with different CBFSRs.Nine typical three-story RC frame models with different CBFSRs are designed in accordance with Chinese seismic codes.The seismic responses and failure modes of the frames are investigated through time-history analyses using 100 ground motion records.The results show that the required limit of the CBFSR that guarantees the SCWB failure mode depends on the beam-column connection type and the seismic intensity,and different types of beam-column connections exhibit different failure modes even though they are designed with the same CBFSR.Recommended CBFSRs are proposed for achieving the designed SCWB failure mode for different types of connections in RC frames under different seismic intensities.These results may provide some reference for further revisions of the SCWB design criterion in Chinese seismic codes. 相似文献
5.
Coupled effects of railway vibration, rainfall, and drying-wetting cycles contribute to new types of loess disasters such as the collapse and vibration-induced settlement of the railway subgrade, loess mass disintegration, and slope sliding,during the large-scale construction and operation of high-speed or heavy-haul railways in China. This has significant consequences for railways that require millimetre-level deformation control, seriously threatening railway operation and people's lives. Therefore, for the first time, "five vibration-induced effects" on loess subjected to vibration, water immersion, and drywetting cycles are discussed including the vibration-induced acceleration of cracking, infiltration, disintegration, sliding, and subsidence. In this paper, the vibration-induced acceleration of infiltration is discussed mainly. The response of loess to locomotive vibration along railways was determined using field sampling and data processing. The dominant frequency of locomotive vibration are 18-22 Hz and the maximum amplitude is 0.4 mm. Tests regarding the vibration-induced acceleration of the permeability were conducted on intact loess using a newly developed vibration permeability apparatus. The results reveal that the vibration accelerates the water permeability and increases the water saturation of loess. The permeability coefficient of saturated loess under vibration is ~1.5-20 times of that without vibration, reaching a maximum at a vibration frequency of 20 Hz.Vibration-induced infiltration tests were carried out on a loess column and the vibration-induced acceleration of water infiltration, wetting front evolution, and air outflow were analysed. The vibration-induced acceleration of infiltration strongly depends on the dry density, vibration frequency, and vibration amplitude. This pioneering work explores the mechnism of loess disasters triggered by locomotive vibration, rainfall, and drying-wetting cycles. 相似文献
6.
Qian Lu Shijie Wang Xiaoyong Bai Fang Liu Shiqi Tian Mingming Wang Jinfeng Wang 《Acta Geochimica》2020,(1):116-126
In near-infrared spectroscopy,the traditional feature band extraction method has certain limitations.Therefore,a band extraction method named the three-step extraction method was proposed.This method combines characteristic absorption bands and correlation coefficients to select characteristic bands corresponding to various spectral forms and then uses stepwise regression to eliminate meaningless variables.Partial least squares regression(PLSR)and extreme learning machine(ELM)models were used to verify the effect of the band extraction method.Results show that the differential transformation of the spectrum can effectively improve the correlation between the spectrum and nickel(Ni)content.Most correlation coefficients were above 0.7 and approximately 20%higher than those of other transformation methods.The model effect established by the feature variable selection method based on comprehensive spectral transformation is only slightly affected by the spectral transformation form.Infive types of spectral transformation,the RPD values of the proposed method were all within the same level.The RPD values of the PLSR model were concentrated between 1.6 and 1.8,and those of the ELM model were between 2.5 and2.9,indicating that this method is beneficial for extracting more complete spectral features.The combination of the three-step extraction method and ELM algorithm can effectively retain important bands associated with the Ni content of the soil.The model based on the spectral band selected by the three-step extraction method has better prediction ability than the other models.The ELM model of the first-order differential transformation has the best prediction accuracy(RP^2=0.923,RPD=3.634).The research results provide some technical support for monitoring heavy metal content spectrum in local soils. 相似文献
7.
通过食物组成分析和渔获物组成调查,并结合历年渔获量统计和环境监测资料,研究了太湖鲫鱼数量变化的规律、机制及与环境间的相互关系.渔获物调查和渔获量统计资料均表明:近年鲫鱼数量不断增加,已成为太湖仅次于鲚鱼的重要鱼类2004年渔获物调查中,鲫鱼占鱼类总重量的8.40%±2.69%,占鲤、鲫鱼渔获量的65.08%±15.47%;历年渔获量统计显示,1952-1998年鲤、鲫鱼渔获量相对稳定在1010.1±367.2 t、占鱼类总量8.89%±5.33%,1999年上升达到2547.4 t、占9.45%,2000年达到3708.7 t,占12.18%;年龄组成分析表明,鲫鱼低龄化趋势在加剧.食性分析表明:在7-12月,微囊藻占鲫鱼食物体积的83.65%-93.99%.分析认为:太湖鲫鱼以微囊藻为主要食物;富营养化加重为其提供了充足饵料,实施禁渔期、禁渔区等措施使其繁殖得到保障,捕捞强度过高导致其年龄组成低龄化、个体小型化.而太湖鲫鱼以蓝藻为主要食物,可能对蓝藻有抑制作用. 相似文献
8.
福建和台湾地震台网测定地震震级差异研究 总被引：1，自引：0，他引：1
介绍了闽、台地震台网及观测资料情况,统计了1971年以来两台网均有测定的在台湾及其邻近海域地区发生的6级以上地震,并计算了福建地震台网测定近震震级范围、闽台两地震台网测定震级的差量、平均偏差及标准偏差.结果表明,福建地震台网测定台湾及其邻近海域地区强震震级普遍偏小,存在0.3～0.5级的偏差.进而分析了闽、台地震台网测定台湾强震震级的差异关系,对福建地震台网测定台湾及其邻近海域强震震级偏差改正及闽、台今后开展地震联合观测有重要参考价值. 相似文献
9.
10.
Yanju Peng Yuejun Lu Jiaquan Yan Rongyu Tang Junqin Wang Jiagang Li 《地震工程与工程振动(英文版)》2010,9(2):223-231
This paper analyzes the seismicity in Bohai Sea,introducing a shape factor K to characterize the seismic risk distribution in sub-regions of the sea. Based on the seismic design ground motions for 46 platforms located in the Bohai Sea,a statistical analysis was performed for different peak ground acceleration (PGA) ratios at two different probability levels. In accordance with the two-stage design method,a scheme of two seismic design levels is proposed,and two seismic design objectives are established respectively for the strength level earthquake and the ductility level earthquake. By analogy with and comparison to the Chinese seismic design code for buildings,it is proposed that the probability level for the strength level earthquake and ductility level earthquake have a return period of 200 and 1000 - 2500 years,respectively. The validity of these proposed values is discussed. Finally,the PGAs corresponding to these two probability levels are calculated for different sub-regions of the Bohai Sea. 相似文献
11.
利用超弹性SMA螺栓梁柱节点的耗能能力和自复位特性，将其引入到耗能跨而构建"自复位耗能跨"，基于既有的节点试验研究结果对结构体系的滞回性能进行了探讨。在此基础上，以具有旗形滞回特征的单自由度体系为工具，对配置自复位耗能跨低多层钢框架体系的能量系数进行推导。能量系数可以合理量化具有旗形滞回规则结构的峰值响应需求，能量系数越低，表明地震动下结构的峰值响应越低。为了阐明滞回参数对能量系数的影响，对具有不同滞回参数组合可代表低多层结构的等效SDOF体系进行了非线性动力分析，参数组合包括周期、屈服后刚度比、延性系数及能量比。同时对能量系数的离散性也进行了分析。结果表明:能量系数及能量系数的离散性受结构周期、屈服后刚度比及延性系数影响较大，受能量比的影响较小。 相似文献
12.
下翼缘摩擦式自定心钢框架梁柱节点抗震性能的数值模拟 总被引：2，自引：0，他引：2
介绍了一种新型的铜框架梁柱节点形式,其中预应力钢绞线提供了结构在地震作用下的复位功能（自定心）,设置在梁端下翼缘的摩擦件则为结构提供了耗能能力;介绍了下翼缘摩擦式自定心钢框架粱柱节点的构造和工作原理,以节点的低用反复加载试验结果为依据,利用面向对象的开放式计算程序OpenSees建立了节点的数值模型,并侧重于模拟节点在地震作用下的张开/闭合、自定心、摩擦耗能以及螺栓受剪等特性。由计算结果与试验结果对比可知,所建立的数值模型对节点的抗震性能具有良好的模拟效果。 相似文献
13.
为减小结构震后残余位移，提高框架结构的震后可修复性，本文提出1种自复位耗能加固方法。以一典型框架结构为例，对比传统框架结构和采用自复位耗能装置加固框架结构的地震响应，并研究自复位耗能装置各参数对加固后结构抗震性能的影响。结果表明:采用自复位耗能装置加固框架结构可有效减小残余位移，但有可能增大结构内力响应；结构的残余位移随着弹簧刚度的增大而减小，结构的内力响应也随之增大；预拉力越大，结构内力响应增加越小，在实际工程中应对自复位加固装置的弹簧刚度和预拉力进行优化以获得最优的自复位加固效果。 相似文献
14.
主要针对梁腹板带有摩擦耗能螺栓的自复位钢框架节点结构进行抗震性能和可更换性能的试验研究，探讨该类节点在往复荷载作用下的滞回性能以及节点域的变形特征。在参数选型的基础上，对5组钢框架节点试件进行了低周反复荷载作用下的拟静力试验，其中:4组试件具有自复位能力，分析了各试件的承载力、刚度、耗能性能和滞回特性等性能。综合研究结果表明:所提出的拼接节点能够利用摩擦螺栓的滑移提高节点的耗能能力，有效减少梁和柱主体构件的损伤，同时预应力筋提供了结构的自复位能力。试验结果表明:在地震作用之后，通过更换腹板及摩擦螺栓可以使结构的承载能力和耗能性能与震前基本一致，从而实现结构功能的快速恢复。 相似文献
15.
针对自复位节点钢绞线预应力损失的问题,提出了一种新型碟形弹簧自复位梁柱钢节点。介绍了该节点的构造,对该节点的力学性能进行了理论分析。采用ABAQUS建立了碟形弹簧自复位梁柱钢节点的有限元模型,根据理论分析的计算结果验证了有限元分析的准确性。分析了弹簧预压力、摩擦系数、弹簧刚度和腹板摩擦装置的螺栓预紧力对该节点受力性能的影响。结果表明:碟形弹簧自复位梁柱钢节点在低周循环荷载作用下的滞回曲线为旗帜形,具有较好的复位能力和耗能能力。弹簧预压力、摩擦系数和腹板摩擦装置的螺栓预紧力对节点开口弯矩、耗能能力和复位能力的影响较大;弹簧刚度对自复位节点开口后刚度、耗能能力和残余变形的影响较大。 相似文献
16.
全装配式预制混凝土结构梁柱组合件抗震性能试验研究 总被引：15，自引：1，他引：15
采用足尺模型对比试验方法对现浇高强混凝土梁柱组合件、预制混凝土结构高强混凝土后浇整体式梁柱组合件和高强预制混凝土结构全装配式梁柱组合件在低周反复荷载作用下的开裂破坏形态、滞回特性、骨架曲线、强度与刚度退化特性、耗能能力、节点核心区域的剪切变形、梁端与柱端的转动变形等抗震性能指标进行了系统研究。结果表明：高强预制混凝土结构后浇整体式梁柱组合件与现浇高强混凝土结构梁柱组合件具有相同的抗震能力，全装配式预制混凝土梁柱组合件的抗震性能和主要抗震性能指标与现浇高强混凝土梁柱组合件和预制混凝土结构后浇整体式梁柱组合件存在明显的差异。对于实际工程应用，应采取必要措施增加全装配式节点的耗能能力。 相似文献
17.
Though rocking shallow foundations could be designed to possess many desirable characteristics such as energy dissipation, isolation, and self-centering, current seismic design codes often avoid nonlinear behavior of soil and energy dissipation beneath foundations. This paper compares the effectiveness of energy dissipation in foundation soil (during rocking) with the effectiveness of structural energy dissipation devices during seismic loading. Numerical simulations were carried out to systematically study the seismic energy dissipation in structural elements and passive controlled energy dissipation devices inserted into the structure. The numerical model was validated using shaking table experimental results on model frame structures with and without energy dissipation devices. The energy dissipation in the structure, drift ratio, and the force and displacement demands on the structure are compared with energy dissipation characteristics of rocking shallow foundations as observed in centrifuge experiments, where shallow foundations were allowed to rock on dry sandy soil stratum during dynamic loading. For the structures with energy dissipating devices, about 70–90% of the seismic input energy is dissipated by energy dissipating devices, while foundation rocking dissipates about 30–90% of the total seismic input energy in foundation soil (depending on the static factor of safety). Results indicate that, if properly designed (with reliable capacity and tolerable settlements), adverse effects of foundation rocking can be minimized, while taking advantage of the favorable features of foundation rocking and hence they can be used as efficient and economical seismic energy dissipation mechanisms in buildings and bridges. 相似文献
18.
Self-centering seismic retrofit scheme for reinforced concrete frame structures: SDOF system study 总被引：1，自引：1，他引：0
This paper presents the results of a parametric study of self-centering seismic retrofit schemes for reinforced concrete (RC) frame buildings. The self-centering retrofit system features flag-shaped hysteresis and minimal residual deformation. For comparison purpose,an alternate seismic retrofit scheme that uses a bilinear-hysteresis retrofit system such as buckling-restrained braces (BRB) is also considered in this paper. The parametric study was carried out in a single-degree-of-freedom (SDOF) system framework since a multi-story building structure may be idealized as an equivalent SDOF system and investigation of the performance of this equivalent SDOF system can provide insight into the seismic response of the multi-story building. A peak-oriented hysteresis model which can consider the strength and stiffness degradation is used to describe the hysteretic behavior of RC structures. The parametric study involves two key parameters -the strength ratio and elastic stiffness ratio between the seismic retrofit system and the original RC frame. An ensemble of 172 earthquake ground motion records scaled to the design basis earthquake in California with a probability of exceedance of 10% in 50 years was constructed for the simulation-based parametric study. The effectiveness of the two seismic retrofit schemes considered in this study is evaluated in terms of peak displacement ratio,peak acceleration ratio,energy dissipation demand ratio and residual displacement ratio between the SDOF systems with and without retrofit. It is found from this parametric study that RC structures retrofitted with the self-centering retrofit scheme (SCRS) can achieve a seismic performance level comparable to the bilinear-hysteresis retrofit scheme (BHRS) in terms of peak displacement and energy dissipation demand ratio while having negligible residual displacement after earthquake. 相似文献
19.
A new type of beam-to-column connection for steel moment flames, designated as a ＂self-centering connection,＂ is studied. In this connection, bolted top-and-seat angles, and post-tensioned （PT） high-strength steel strands running along the beam are used. The PT strands tie the beam flanges on the column flange to resist moment and provide self-centering force. After an earthquake, the connections have zero deformation, and can be restored to their original status by simply replacing the angles. Four full-scale connections were tested under cyclic loading. The strength, energy-dissipation capacity, hysteresis curve, as well as angles and PT strands behavior of the connections are investigated. A general FEM analysis program called ABAQUS 6.9 is adopted to model the four test specimens. The numerical and test results match very well. Both the test and analysis results suggest that： （1） the columns and beams remain elastic while the angles sustain plastic deformations for energy dissipation when the rotation of the beam related to the column equals 0.05 tad, （2） the energy dissipation capacity is enhanced when the thickness of the angle is increased, and （3） the number of PT strands has a significant influence on the behavior of the connections, whereas the distance between the strands is not as important to the performance of the connection. 相似文献
20.
Giovanni De Francesco 《地震工程与结构动力学》2019,48(2):188-209
This paper focuses on constant-ductility inelastic displacement ratios of self-centering single-degree-of-freedom (SDF) systems with two different levels of energy dissipation capacity, in the presence of 5% viscous damping ratio. A statistical analysis is developed considering an earthquake database composed of 228 ground motions recorded in California with magnitudes greater than six and organized for NEHRP soil class, ground motion duration, and peak ground acceleration. The response of self-centering SDF systems with large variability of initial periods, ductility levels, and postyield stiffness ratios is investigated and compared with the responses of SDF systems with bilinear plastic, Clough, and Takeda hysteresis. The inelastic demand variation with soil class, initial period, postyield stiffness ratio, unloading stiffness degradation, ductility level, and hysteretic behavior is highlighted. Simple and conservative analytical estimates of constant-ductility inelastic displacement ratios for mean and 90th percentile values in terms of initial period, ductility level, and postyield stiffness ratio are proposed to allow the extension of the Displacement-Based Design via Inelastic Displacement Ratio (CμDBD) to self-centering structural systems. 相似文献