首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 34 毫秒
1.
Coherent noise in land seismic data primarily consists in source‐generated surface‐wave modes. The component that is traditionally considered most relevant is the so‐called ground roll, consisting in surface‐wave modes propagating directly from sources to receivers. In many geological situations, near?surface heterogeneities and discontinuities, as well as topography irregularities, diffract the surface waves and generate secondary events, which can heavily contaminate records. The diffracted and converted surface waves are often called scattered noise and can be a severe problem particularly in areas with shallow or outcropping hard lithological formations. Conventional noise attenuation techniques are not effective with scattering: they can usually address the tails but not the apices of the scattered events. Large source and receiver arrays can attenuate scattering but only in exchange for a compromise to signal fidelity and resolution. We present a model?based technique for the scattering attenuation, based on the estimation of surface‐wave properties and on the prediction of surface waves with a complex path involving diffractions. The properties are estimated first, to produce surface?consistent volumes of the propagation properties. Then, for all gathers to filter, we integrate the contributions of all possible diffractors, building a scattering model. The estimated scattered wavefield is then subtracted from the data. The method can work in different domains and copes with aliased surface waves. The benefits of the method are demonstrated with synthetic and real data.  相似文献   

2.
Topography and severe variations of near‐surface layers lead to travel‐time perturbations for the events in seismic exploration. Usually, these perturbations could be estimated and eliminated by refraction technology. The virtual refraction method is a relatively new technique for retrieval of refraction information from seismic records contaminated by noise. Based on the virtual refraction, this paper proposes super‐virtual refraction interferometry by cross‐correlation to retrieve refraction wavefields by summing the cross‐correlation of raw refraction wavefields and virtual refraction wavefields over all receivers located outside the retrieved source and receiver pair. This method can enhance refraction signal gradually as the source–receiver offset decreases. For further enhancement of refracted waves, a scheme of hybrid virtual refraction wavefields is applied by stacking of correlation‐type and convolution‐type super‐virtual refractions. Our new method does not need any information about the near‐surface velocity model, which can solve the problem of directly unmeasured virtual refraction energy from the virtual source at the surface, and extend the acquisition aperture to its maximum extent in raw seismic records. It can also reduce random noise influence in raw seismic records effectively and improve refracted waves’ signal‐to‐noise ratio by a factor proportional to the square root of the number of receivers positioned at stationary‐phase points, based on the improvement of virtual refraction's signal‐to‐noise ratio. Using results from synthetic and field data, we show that our new method is effective to retrieve refraction information from raw seismic records and improve the accuracy of first‐arrival picks.  相似文献   

3.
In the field of seismic interferometry, researchers have retrieved surface waves and body waves by cross‐correlating recordings of uncorrelated noise sources to extract useful subsurface information. The retrieved wavefields in most applications are between receivers. When the positions of the noise sources are known, inter‐source interferometry can be applied to retrieve the wavefields between sources, thus turning sources into virtual receivers. Previous applications of this form of interferometry assume impulsive point sources or transient sources with similar signatures. We investigate the requirements of applying inter‐source seismic interferometry using non‐transient noise sources with known positions to retrieve reflection responses at those positions and show the results using synthetic drilling noise as source. We show that, if pilot signals (estimates of the drill‐bit signals) are not available, it is required that the drill‐bit signals are the same and that the phases of the virtual reflections at drill‐bit positions can be retrieved by deconvolution interferometry or by cross‐coherence interferometry. Further, for this case, classic interferometry by cross‐correlation can be used if the source power spectrum can be estimated. If pilot signals are available, virtual reflection responses can be obtained by first using standard seismic‐while‐drilling processing techniques such as pilot cross‐correlation and pilot deconvolution to remove the drill‐bit signatures in the data and then applying cross‐correlation interferometry. Therefore, provided that pilot signals are reliable, drill‐bit data can be redatumed from surface to borehole depths using this inter‐source interferometry approach without any velocity information of the medium, and we show that a well‐positioned image below the borehole can be obtained using interferometrically redatumed reflection responses with just a simple velocity model. We discuss some of the practical hurdles that restrict the application of the proposed method offshore.  相似文献   

4.
We use numerically modelled data sets to investigate the sensitivity of electromagnetic interferometry by multidimensional deconvolution to spatial receiver sampling. Interferometry by multidimensional deconvolution retrieves the reflection response below the receivers after decomposition of the fields into upward and downward decaying fields and deconvolving the upward decaying field by the downward decaying field. Thereby the medium above the receiver level is replaced with a homogeneous half‐space, the sources are redatumed to the receiver level and the direct field is removed. Consequently, in a marine setting the retrieved reflection response is independent of any effect of the water layer and the air above. A drawback of interferometry by multidimensional deconvolution is a possibly unstable matrix inversion, which is necessary to retrieve the reflection response. Additionally, in order to correctly separate the upward and the downward decaying fields, the electromagnetic fields need to be sampled properly. We show that the largest possible receiver spacing depends on two parameters: the vertical distance between the source and the receivers and the length of the source. The receiver spacing should not exceed the larger of these two parameters. Besides these two parameters, the presence of inhomogeneities close to the receivers may also require a dense receiver sampling. We show that by using the synthetic aperture concept, an elongated source can be created from conventionally acquired data in order to overcome these strict sampling criteria. Finally, we show that interferometry may work under real‐world conditions with random noise and receiver orientation and positioning errors.  相似文献   

5.
We present a modified interferometry method based on local tangent‐phase analysis, which corrects the cross‐correlated data before summation. The approach makes it possible to synthesize virtual signals usually vanishing in the conventional seismic interferometry summation. For a given pair of receivers and a set of different source positions, a plurality of virtual traces is obtained at new stationary projected points located along the signal wavefronts passing through the real reference receiver. The position of the projected points is estimated by minimizing travel times using wavefront constraint and correlation‐signal tangent information. The method uses mixed processing, which is partially based on velocity‐model knowledge and on data‐based blind interferometry. The approach can be used for selected events, including reflections with different stationary conditions and projected points with respect to those of the direct arrivals, to extend the interferometry representation in seismic exploration data where conventional illumination coverage is not sufficient to obtain the stationary‐phase condition. We discuss possible applications in crosswell geometry with a velocity anomaly and a time lapse.  相似文献   

6.
We apply interferometric theory to solve a three‐dimensional seismic residual statics problem to improve reflection imaging. The approach calculates the static solutions without picking the first arrivals from the shot or receiver gathers. The static correction accuracy can be significantly improved by utilising stacked virtual refraction gathers in the calculations. Shots and receivers may be placed at any position in a three‐dimensional seismic land survey. Therefore, it is difficult to determine stationary shots and receivers to form the virtual refraction traces that have identical arrival times, as in a two‐dimensional scenario. To overcome this problem, we use a three‐dimensional super‐virtual interferometry method for residual static calculations. The virtual refraction for a stationary shot/receiver pair is obtained via an integral along the receiver/shot lines, which does not require knowledge of the stationary locations. We pick the maximum energy times on the interferometric stacks and solve a set of linear equations to derive reliable residual static solutions. We further apply the approach to both synthetic and real data.  相似文献   

7.
We use different interferometry approaches to process the seismic signals generated by a drill‐bit source in one well and recorded by seismic receivers located both in a second borehole and at the surface near the source well. We compare the standard interferometry results, obtained by using the raw drill‐bit data without a pilot signal, with the new interferometry results obtained by using the drill‐bit seismograms correlated with a reference pilot signal. The analysis of the stationary phase shows that the final results have different S/N levels and are affected by the coherent noise in the form of rig arrivals. The interferometry methods are compared by using different deconvolution approaches. The analysis shows that the results agree with the conventional drill‐bit seismograms and that using the reference pilot signal improves the quality of the drill‐bit wavefields redatumed by the interferometry method.  相似文献   

8.
We developed a new marine controlled‐source electromagnetic receiver for detecting methane hydrate zones and oil and gas reservoirs on the seafloor, which is not imaged well by seismic reflection surveys. To determine the seafloor structure, the electromagnetic receiver should have low noise, power consumption, clock drift error, and operating costs while being highly reliable. Because no suitable receiver was available in our laboratory, we developed a new marine controlled‐source electromagnetic receiver with these characteristics; the receiver is equipped with acoustic telemetry modem and an arm‐folding mechanism to facilitate deployment and recovering operations. To demonstrate the applicability of our new receiver, we carried out a field experiment offshore of Guangzhou in the South China Sea, where methane hydrates have been discovered. We successfully obtained controlled‐source electromagnetic data along a profile about 13 km long. All six new receivers were recovered, and high‐quality electromagnetic data were obtained. Relatively high apparent resistivity values were detected. The results of the offshore field experiment support the claim that the electromagnetic data obtained using the new receiver are of sufficient quality for the survey target.  相似文献   

9.
We present an approach based on local‐slope estimation for the separation of scattered surface waves from reflected body waves. The direct and scattered surface waves contain a significant amount of seismic energy. They present great challenges in land seismic data acquisition and processing, particularly in arid regions with complex near‐surface heterogeneities (e.g., dry river beds, wadis/large escarpments, and karst features). The near‐surface scattered body‐to‐surface waves, which have comparable amplitudes to reflections, can mask the seismic reflections. These difficulties, added to large amplitude direct and back‐scattered surface (Rayleigh) waves, create a major reduction in signal‐to‐noise ratio and degrade the final sub‐surface image quality. Removal of these waves can be difficult using conventional filtering methods, such as an filter, without distorting the reflected signal. The filtering algorithm we present is based on predicting the spatially varying slope of the noise, using steerable filters, and separating the signal and noise components by applying a directional nonlinear filter oriented toward the noise direction to predict the noise and then subtract it from the data. The slope estimation step using steerable filters is very efficient. It requires only a linear combination of a set of basis filters at fixed orientation to synthesize an image filtered at an arbitrary orientation. We apply our filtering approach to simulated data as well as to seismic data recorded in the field to suppress the scattered surface waves from reflected body waves, and we demonstrate its superiority over conventional techniques in signal preservation and noise suppression.  相似文献   

10.
Interferometric redatuming is a data‐driven method to transform seismic responses with sources at one level and receivers at a deeper level into virtual reflection data with both sources and receivers at the deeper level. Although this method has traditionally been applied by cross‐correlation, accurate redatuming through a heterogeneous overburden requires solving a multidimensional deconvolution problem. Input data can be obtained either by direct observation (for instance in a horizontal borehole), by modelling or by a novel iterative scheme that is currently being developed. The output of interferometric redatuming can be used for imaging below the redatuming level, resulting in a so‐called interferometric image. Internal multiples from above the redatuming level are eliminated during this process. In the past, we introduced point‐spread functions for interferometric redatuming by cross‐correlation. These point‐spread functions quantify distortions in the redatumed data, caused by internal multiple reflections in the overburden. In this paper, we define point‐spread functions for interferometric imaging to quantify these distortions in the image domain. These point‐spread functions are similar to conventional resolution functions for seismic migration but they contain additional information on the internal multiples in the overburden and they are partly data‐driven. We show how these point‐spread functions can be visualized to diagnose image defocusing and artefacts. Finally, we illustrate how point‐spread functions can also be defined for interferometric imaging with passive noise sources in the subsurface or with simultaneous‐source acquisition at the surface.  相似文献   

11.
Surface waves in seismic data are often dominant in a land or shallow‐water environment. Separating them from primaries is of great importance either for removing them as noise for reservoir imaging and characterization or for extracting them as signal for near‐surface characterization. However, their complex properties make the surface‐wave separation significantly challenging in seismic processing. To address the challenges, we propose a method of three‐dimensional surface‐wave estimation and separation using an iterative closed‐loop approach. The closed loop contains a relatively simple forward model of surface waves and adaptive subtraction of the forward‐modelled surface waves from the observed surface waves, making it possible to evaluate the residual between them. In this approach, the surface‐wave model is parameterized by the frequency‐dependent slowness and source properties for each surface‐wave mode. The optimal parameters are estimated in such a way that the residual is minimized and, consequently, this approach solves the inverse problem. Through real data examples, we demonstrate that the proposed method successfully estimates the surface waves and separates them out from the seismic data. In addition, it is demonstrated that our method can also be applied to undersampled, irregularly sampled, and blended seismic data.  相似文献   

12.
Seismic interferometry is a relatively new technique to estimate the Green's function between receivers. Spurious energy, not part of the true Green's function, is produced because assumptions are commonly violated when applying seismic interferometry to field data. Instead of attempting to suppress all spurious energy, we show how spurious energy associated with refractions contains information about the subsurface in field data collected at the Boise Hydrogeophysical Research Site. By forming a virtual shot record we suppress uncorrelated noise and produce a virtual refraction that intercepts zero offset at zero time. These two features make the virtual refraction easy to pick, providing an estimate of refractor velocity. To obtain the physical parameters of the layer above the refractor we analyse the cross‐correlation of wavefields recorded at two receivers for all sources. A stationary‐phase point associated with the correlation between the reflected wave and refracted wave from the interface identifies the critical offset. By combining information from the virtual shot record, the correlation gather and the real shot record we determine the seismic velocities of the unsaturated and saturated sands, as well as the variable relative depth to the water‐table. Finally, we discuss how this method can be extended to more complex geologic models.  相似文献   

13.
In regions where active source seismic exploration is constrained by limitations of energy penetration and recovery, cost and logistical concerns, or regulatory restrictions, analysis of natural source seismic data may provide an alternative. In this study, we investigate the feasibility of using locally‐generated seismic noise in the 2–6 Hz band to obtain a subsurface model via interferometric analysis. We apply this technique to three‐component data recorded during the La Barge Passive Seismic Experiment, a local deployment in south‐western Wyoming that recorded continuous seismic data between November 2008 and June 2009. We find traffic noise from a nearby state road to be the dominant source of surface waves recorded on the array and observe surface wave arrivals associated with this source up to distances of 5 kms. The orientation of the road with respect to the deployment ensures a large number of stationary points, leading to clear observations on both in‐line and cross‐line virtual source‐receiver pairs. This results in a large number of usable interferograms, which in turn enables the application of standard active source processing methods like signal processing, common offset stacking and traveltime inversion. We investigate the dependency of the interferograms on the amount of data, on a range of processing parameters and on the choice of the interferometry algorithm. The obtained interferograms exhibit a high signal‐to‐noise ratio on all three components. Rotation of the horizontal components to the radial/transverse direction facilitates the separation of Rayleigh and Love waves. Though the narrow frequency spectrum of the surface waves prevents the inversion for depth‐dependent shear‐wave velocities, we are able to map the arrival times of the surface waves to laterally varying group and phase velocities for both Rayleigh and Love waves. Our results correlate well with the known geological structure. We outline a scheme for obtaining localized surface wave velocities from local noise sources and show how the processing of passive data benefits from a combination with well‐established exploration seismology methods. We highlight the differences with interferometry applied to crustal scale data and conclude with recommendations for similar deployments.  相似文献   

14.
4D seismic is widely used to remotely monitor fluid movement in subsurface reservoirs. This technique is especially effective offshore where high survey repeatability can be achieved. It comes as no surprise that the first 4D seismic that successfully monitored the CO2 sequestration process was recorded offshore in the Sleipner field, North Sea. In the case of land projects, poor repeatability of the land seismic data due to low S/N ratio often obscures the time‐lapse seismic signal. Hence for a successful on shore monitoring program improving seismic repeatability is essential. Stage 2 of the CO2CRC Otway project involves an injection of a small amount (around 15,000 tonnes) of CO2/CH4 gas mixture into a saline aquifer at a depth of approximately 1.5 km. Previous studies at this site showed that seismic repeatability is relatively low due to variations in weather conditions, near surface geology and farming activities. In order to improve time‐lapse seismic monitoring capabilities, a permanent receiver array can be utilised to improve signal to noise ratio and hence repeatability. A small‐scale trial of such an array was conducted at the Otway site in June 2012. A set of 25 geophones was installed in 3 m deep boreholes in parallel to the same number of surface geophones. In addition, four geophones were placed into boreholes of 1–12 m depth. In order to assess the gain in the signal‐to‐noise ratio and repeatability, both active and passive seismic surveys were carried out. The surveys were conducted in relatively poor weather conditions, with rain, strong wind and thunderstorms. With such an amplified background noise level, we found that the noise level for buried geophones is on average 20 dB lower compared to the surface geophones. The levels of repeatability for borehole geophones estimated around direct wave, reflected wave and ground roll are twice as high as for the surface geophones. Both borehole and surface geophones produce the best repeatability in the 30–90 Hz frequency range. The influence of burying depth on S/N ratio and repeatability shows that significant improvement in repeatability can be reached at a depth of 3 m. The level of repeatability remains relatively constant between 3 and 12 m depths.  相似文献   

15.
We study the stability of source mechanisms inverted from data acquired at surface and near‐surface monitoring arrays. The study is focused on P‐wave data acquired on vertical components, as this is the most common type of acquisition. We apply ray modelling on three models: a fully homogeneous isotropic model, a laterally homogeneous isotropic model and a laterally homogeneous anisotropic model to simulate three commonly used models in inversion. We use geometries of real arrays, one consisting in surface receivers and one consisting in ‘buried’ geophones at the near‐surface. Stability was tested for two of the frequently observed source mechanisms: strike‐slip and dip‐slip and was evaluated by comparing the parameters of correct and inverted mechanisms. We assume these double‐couple source mechanisms and use quantitatively the inversion allowing non‐double‐couple components to measure stability of the inversion. To test the robustness we inverted synthetic amplitudes computed for a laterally homogeneous isotropic model and contaminated with noise using a fully homogeneous model in the inversion. Analogously amplitudes computed in a laterally homogeneous anisotropic model were inverted in all three models. We show that a star‐like surface acquisition array provides very stable inversion up to a very high level of noise in data. Furthermore, we reveal that strike‐slip inversion is more stable than dip‐slip inversion for the receiver geometries considered here. We show that noise and an incorrect velocity model may result in narrow bands of source mechanisms in Hudson's plots.  相似文献   

16.
Time reversal mirrors can be used to backpropagate and refocus incident wavefields to their actual source location, with the subsequent benefits of imaging with high‐resolution and super‐stacking properties. These benefits of time reversal mirrors have been previously verified with computer simulations and laboratory experiments but not with exploration‐scale seismic data. We now demonstrate the high‐resolution and the super‐stacking properties in locating seismic sources with field seismic data that include multiple scattering. Tests on both synthetic data and field data show that a time reversal mirror has the potential to exceed the Rayleigh resolution limit by factors of 4 or more. Results also show that a time reversal mirror has a significant resilience to strong Gaussian noise and that accurate imaging of source locations from passive seismic data can be accomplished with traces having signal‐to‐noise ratios as low as 0.001. Synthetic tests also demonstrate that time reversal mirrors can sometimes enhance the signal by a factor proportional to the square root of the product of the number of traces, denoted as N and the number of events in the traces. This enhancement property is denoted as super‐stacking and greatly exceeds the classical signal‐to‐noise enhancement factor of . High‐resolution and super‐stacking are properties also enjoyed by seismic interferometry and reverse‐time migration with the exact velocity model.  相似文献   

17.
Many natural phenomena, including geologic events and geophysical data, are fundamentally nonstationary ‐ exhibiting statistical variation that changes in space and time. Time‐frequency characterization is useful for analysing such data, seismic traces in particular. We present a novel time‐frequency decomposition, which aims at depicting the nonstationary character of seismic data. The proposed decomposition uses a Fourier basis to match the target signal using regularized least‐squares inversion. The decomposition is invertible, which makes it suitable for analysing nonstationary data. The proposed method can provide more flexible time‐frequency representation than the classical S transform. Results of applying the method to both synthetic and field data examples demonstrate that the local time‐frequency decomposition can characterize nonstationary variation of seismic data and be used in practical applications, such as seismic ground‐roll noise attenuation and multicomponent data registration.  相似文献   

18.
We present a singular value decomposition (SVD) filtering method for the enhancement of coherent reflections and for attenuation of noise. The method is applied in two steps. First normal move‐out (NMO) correction is applied to shot or CMP records, with the purpose of flattening the reflections. We use a spatial SVD filter with a short sliding window to enhance coherent horizontal events. Then the data are sorted in common‐offset panels and the local dip is estimated for each panel. The next SVD filtering is performed on a small number of traces and a small number of time samples centred around the output sample position. Data in a local window are corrected for linear moveout corresponding to the dips before SVD. At the central time sample position, we sum over the dominant eigenimages of a few traces, corresponding to SVD dip filtering. We illustrate the method using land seismic data from the Tacutu basin, located in the north‐east of Brazil. The results show that the proposed method is effective and is able to reveal reflections masked by ground‐roll and other types of noise.  相似文献   

19.
Reverse‐time migration is a two‐way time‐domain finite‐frequency technique that accurately handles the propagation of complex scattered waves and produces a band‐limited representation of the subsurface structure that is conventionally assumed to be linear in the contrasts in model parameters. Because of this underlying linear single‐scattering assumption, most implementations of this method do not satisfy the energy conservation principle and do not optimally use illumination and model sensitivity of multiply scattered waves. Migrating multiply scattered waves requires preserving the non‐linear relation between the image and perturbation of model parameters. I modify the extrapolation of source and receiver wavefields to more accurately handle multiply scattered waves. I extend the concept of the imaging condition in order to map into the subsurface structurally coherent seismic events that correspond to the interaction of both singly and multiply scattered waves. This results in an imaging process referred to here as non‐linear reverse‐time migration. It includes a strategy that analyses separated contributions of singly and multiply scattered waves to a final non‐linear image. The goal is to provide a tool suitable for seismic interpretation and potentially migration velocity analysis that benefits from increased illumination and sensitivity from multiply scattered seismic waves. It is noteworthy that this method can migrate internal multiples, a clear advantage for imaging challenging complex subsurface features, e.g., in salt and basalt environments. The results of synthetic seismic imaging experiments, including a subsalt imaging example, illustrate the technique.  相似文献   

20.
Three‐dimensional receiver ghost attenuation (deghosting) of dual‐sensor towed‐streamer data is straightforward, in principle. In its simplest form, it requires applying a three‐dimensional frequency–wavenumber filter to the vertical component of the particle motion data to correct for the amplitude reduction on the vertical component of non‐normal incidence plane waves before combining with the pressure data. More elaborate techniques use three‐dimensional filters to both components before summation, for example, for ghost wavelet dephasing and mitigation of noise of different strengths on the individual components in optimum deghosting. The problem with all these techniques is, of course, that it is usually impossible to transform the data into the crossline wavenumber domain because of aliasing. Hence, usually, a two‐dimensional version of deghosting is applied to the data in the frequency–inline wavenumber domain. We investigate going down the “dimensionality ladder” one more step to a one‐dimensional weighted summation of the records of the collocated sensors to create an approximate deghosting procedure. We specifically consider amplitude‐balancing weights computed via a standard automatic gain control before summation, reminiscent of a diversity stack of the dual‐sensor recordings. This technique is independent of the actual streamer depth and insensitive to variations in the sea‐surface reflection coefficient. The automatic gain control weights serve two purposes: (i) to approximately correct for the geometric amplitude loss of the Z data and (ii) to mitigate noise strength variations on the two components. Here, Z denotes the vertical component of the velocity of particle motion scaled by the seismic impedance of the near‐sensor water volume. The weights are time‐varying and can also be made frequency‐band dependent, adapting better to frequency variations of the noise. The investigated process is a very robust, almost fully hands‐off, approximate three‐dimensional deghosting step for dual‐sensor data, requiring no spatial filtering and no explicit estimates of noise power. We argue that this technique performs well in terms of ghost attenuation (albeit, not exact ghost removal) and balancing the signal‐to‐noise ratio in the output data. For instances where full three‐dimensional receiver deghosting is the final product, the proposed technique is appropriate for efficient quality control of the data acquired and in aiding the parameterisation of the subsequent deghosting processing.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号