首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 343 毫秒
1.
New databases motivate improvements and extensions of the catalogue by Grünthal and Wahlström (J Seismol 7:507–531, 2003a) – G&;W03 – of earthquakes in central, northern, and northwestern Europe with M w?≥?3.50. Data from over 30 regional catalogues, the International Seismological Centre and U.S. National Earthquake Information Center bulletins for the NE Atlantic Ocean, and many special studies were analysed, largely along the lines of the previous study. Non-tectonic, non-seismic, and non-existing as well as duplicate events were identified and removed according to our current stage of knowledge. If not given by the original source, the moment magnitude, M w, was calculated for each event with a specified epicentral location and a given strength measure (i.e., an original magnitude of any type or, for onshore events only, an intensity). The calculations follow transformation relations derived in the present or in our previous study. The investigated area is subdivided into 22 polygons, in each of which one or more local catalogues, supplemented by data from special studies, are used. If more than one catalogue lists an event, one entry was selected according to a priority algorithm specific for each polygon. If the selected catalogue entry contains more than one strength type, one was selected for the M w calculation according to another priority scheme. The final catalogue, CENEC, is confined to the time period 1000–2004 and magnitudes M w?≥?3.50. This is an extension of the time period covered by G&;W03 (1300–1993). The number of events has increased from about 5,000 to about 8,000. For each entry, available information on the date, time, location (including focal depth), intensity I 0, magnitude M w, and source (i.e., the local catalogue or special study) are given. The strength type and value from which M w was calculated are also indicated. The catalogue is available on the website of the GFZ German Research Centre of Geosciences.  相似文献   

2.
The catalogue by Grünthal et al. (J Seismol 13:517?C541, 2009a) of earthquakes in central, northern, and north-western Europe with M w????3.5 (CENEC) has been expanded to cover also southern Europe and the Mediterranean area. It has also been extended in time (1000?C2006). Due to the strongly increased seismicity in the new area, the threshold for events south of the latitude 44°N has here been set at M w????4.0, keeping the lower threshold in the northern catalogue part. This part has been updated with data from new and revised national and regional catalogues. The new Euro-Mediterranean Earthquake Catalogue (EMEC) is based on data from some 80 domestic catalogues and data files and over 100 special studies. Available original M w and M 0 data have been introduced. The analysis largely followed the lines of the Grünthal et al. (J Seismol 13:517?C541, 2009a) study, i.e., fake and duplicate events were identified and removed, polygons were specified within each of which one or more of the catalogues or data files have validity, and existing magnitudes and intensities were converted to M w. Algorithms to compute M w are based on relations provided locally, or more commonly on those derived by Grünthal et al. (J Seismol 13:517?C541, 2009a) or in the present study. The homogeneity of EMEC with respect to M w for the different constituents was investigated and improved where feasible. EMEC contains entries of some 45,000 earthquakes. For each event, the date, time, location (including focal depth if available), intensity I 0 (if given in the original catalogue), magnitude M w (with uncertainty when given), and source (catalogue or special study) are presented. Besides the main EMEC catalogue, large events before year 1000 in the SE part of the investigated area and fake events, respectively, are given in separate lists.  相似文献   

3.
Large data sets covering large areas and time spans and composed of many different independent sources raise the question of the obtained degree of harmonization. The present study is an analysis of the harmonization with respect to the moment magnitude M w within the earthquake catalogue for central, northern, and northwestern Europe (CENEC). The CENEC earthquake catalogue (Grünthal et al., J Seismol, 2009) contains parameters for over 8,000 events in the time period 1000–2004 with magnitude M w ≥ 3.5. Only about 2% of the data used for CENEC have original M w magnitudes derived directly from digital data. Some of the local catalogues and data files providing data give M w, but calculated by the respective agency from other magnitude measures or intensity. About 60% of the local data give strength measures other than M w, and these have to be transformed by us using available formulae or new regressions based on original M w data. Although all events are thus unified to M w magnitude, inhomogeneity in the M w obtained from over 40 local catalogues and data files and 50 special studies is inevitable. Two different approaches have been followed to investigate the compatibility of the different M w sets throughout CENEC. The first harmonization check is performed using M w from moment tensor solutions from SMTS and Pondrelli et al. (Phys Earth Planet Inter 130:71–101, 2002; Phys Earth Planet Inter 164:90–112, 2007). The method to derive the SMTS is described, e.g., by Braunmiller et al. (Tectonophysics 356:5–22, 2002) and Bernardi et al. (Geophys J Int 157:703–716, 2004), and the data are available in greater extent since 1997. One check is made against the M w given in national catalogues and another against the M w derived by applying different empirical relations developed for CENEC. The second harmonization check concerns the vast majority of data in CENEC related to earthquakes prior to 1997 or where no moment tensor based M w exists. In this case, an empirical relation for the M w dependence on epicentral intensity (I 0) and focal depth (h) was derived for 41 master events, i.e., earthquakes, located all over central Europe, with high-quality data. To include also the data lacking h, the corresponding depth-independent relation for these 41 events was also derived. These equations are compared with the different sets of data from which CENEC has been composed, and the goodness of fit is demonstrated for each set. The vast majority of the events are very well or reasonably consistent with the respective relation so that the data can be said to be harmonized with respect to M w, but there are exceptions, which are discussed in detail.  相似文献   

4.
本文基于匹配滤波技术，通过SEPD（Seismic Events and Phase Detection）对2018年11月25日新疆博乐MS4.9地震序列进行检测，检测出遗漏地震32条，84.4%地震为ML0.0—1.0，9.4%地震小于ML0.0，较地震目录中原有15条地震多213%，检测出的遗漏地震事件使地震目录更加完整。检测后的最小完整性震级由检测前的ML1.6减至ML0.8，地震目录最小完整性震级的减小有利于地震工作者对区域地震活动性作出更准确全面的结论，并使地震危险性分析更可靠。  相似文献   

5.
Many catalogues, agency reports and research articles have been published on seismicity of Turkey and its surrounding since 1950s. Given existing magnitude heterogeneity, erroneous information on epicentral location, event date and time, this past published data however is far from fulfilling the required standards. Paucity of a standardized format in the available catalogues have reinforced the need for a refined and updated catalogue for earthquake related hazard and risk studies. During this study, ~37,000 earthquakes and related parametric data were evaluated by utilizing more than 41 published studies and, an integrated database was prepared in order to analyse all parameters acquired from the catalogues and references for each event. Within the scope of this study, the epicentral locations of M ≥ 5.0 events were firstly reappraised based on the updated Active Fault Map of Turkey. An improved catalogue of 12.674 events for the period 1900–2012 was as a result recompiled for the region between 32–45N° and 23–48E° by analyzing in detail accuracy of all seismological parameters available for each event. The events consist of M ≥ 4.0 are reported in several magnitude scales (e.g. moment magnitude, Mw; surface wave magnitude, MS; body-wave magnitude mb; local magnitude ML and duration magnitude Md) whereas the maximum focal depth reaches up to 225-km. In order to provide homogenous data, the improved catalogue is unified in terms of Mw. Fore-and aftershocks were also removed from the catalogue and completeness analyses were performed both separately for various tectonic sources and as a whole for the study region of interest. Thus, the prepared homogenous and declustered catalogue consisting of 6573 events provides the basis for a reliable input to the seismic hazard assessment studies for Turkey and its surrounding areas.  相似文献   

6.
Wave-form modelling of body waves has been done to study the seismic source parameters of three earthquakes which occurred on October 21, 1964 (M b =5.9), September 26, 1966 (M b =5.8) and March 14, 1967 (M b =5.8). These events occurred in the Indochina border region where a low-angle thrust fault accommodates motion between the underthrusting Indian plate and overlying Himalaya. The focal depths of all these earthquakes are between 12–37 km. The total range in dip for the three events is 5°–20°. TheT axes are NE-SW directed whereas the strikes of the northward dipping nodal planes are generally parallel to the local structural trend. The total source durations have been found to vary between 5–6 seconds. The average values of seismic moment, fault radius and dislocation are 1.0–11.0×1025 dyne-cm, 7.7–8.4km and 9.4–47.4 cm, respectively whereas stress drop, apparent stress and strain energy are found to be 16–76 bars, 8.2–37.9 bars and 0.1–1.7×1021 ergs, respectively. These earthquakes possibly resulted due to the tension caused by the bending of the lithospheric plate into a region of former subduction which is now a zone of thrusting and crustal shortening.  相似文献   

7.
Calibration of magnitude scales for earthquakes of the Mediterranean   总被引：1，自引：1，他引：0  
In order to provide the tools for uniform size determination for Mediterranean earthquakes over the last 50-year period of instrumental seismology, we have regressed the magnitude determinations for 220 earthquakes of the European-Mediterranean region over the 1977–1991 period, reported by three international centres, 11 national and regional networks and 101 individual stations and observatories, using seismic moments from the Harvard CMTs. We calibrate M(M0) regression curves for the magnitude scales commonly used for Mediterranean earthquakes (ML, MWA, mb, MS, MLH, MLV, MD, M); we also calibrate static corrections or specific regressions for individual observatories and we verify the reliability of the reports of different organizations and observatories. Our analysis shows that the teleseismic magnitudes (mb, MS) computed by international centers (ISC, NEIC) provide good measures of earthquake size, with low standard deviations (0.17–0.23), allowing one to regress stable regional calibrations with respect to the seismic moment and to correct systematic biases such as the hypocentral depth for MS and the radiation pattern for mb; while mb is commonly reputed to be an inadequate measure of earthquake size, we find that the ISC mb is still today the most precise measure to use to regress MW and M0 for earthquakes of the European-Mediterranean region; few individual observatories report teleseismic magnitudes requiring specific dynamic calibrations (BJI, MOS). Regional surface-wave magnitudes (MLV, MLH) reported in Eastern Europe generally provide reliable measures of earthquake size, with standard deviations often in the 0.25–0.35 range; the introduction of a small (±0.1–0.2) static station correction is sometimes required. While the Richter magnitude ML is the measure of earthquake size most commonly reported in the press whenever an earthquake strikes, we find that ML has not been computed in the European-Mediterranean in the last 15 years; the reported local magnitudes MWA and ML do not conform to the Richter formula and are of poor quality and little use, with few exceptions requiring ad hoc calibrations similar to the MS regression (EMSC, ATH). The duration magnitude MD used by most seismic networks confirms that its use requires accurate station calibrations and should be restricted only to events with low seismic moments.  相似文献   

8.
Many authors have proposed that the study of seismicity rates is an appropriate technique for evaluating how close a seismic gap may be to rupture. We designed an algorithm for identification of patterns of significant seismic quiescence by using the definition of seismic quiescence proposed by Schreider (1990). This algorithm shows the area of quiescence where an earthquake of great magnitude may probably occur. We have applied our algorithm to the earthquake catalog on the Mexican Pacific coast located between 14 and 21 degrees of North latitude and 94 and 106 degrees West longitude; with depths less than or equal to 60 km and magnitude greater than or equal to 4.3, which occurred from January, 1965 until December, 2014. We have found significant patterns of seismic quietude before the earthquakes of Oaxaca (November 1978, Mw = 7.8), Petatlán (March 1979, Mw = 7.6), Michoacán (September 1985, Mw = 8.0, and Mw = 7.6) and Colima (October 1995, Mw = 8.0). Fortunately, in this century earthquakes of great magnitude have not occurred in Mexico. However, we have identified well-defined seismic quiescences in the Guerrero seismic-gap, which are apparently correlated with the occurrence of silent earthquakes in 2002, 2006 and 2010 recently discovered by GPS technology.  相似文献   

9.
To better understand the mechanics of subduction and the process of breaking a mature seismic gap, we study seismic activity along the western New Britain subduction segment (147°E–151°E, 4°S–8°S) through earthquakes withm b 5.0 in the outer-rise, the upper area of subducting slab and at intermediate depths to 250 km, from January 1964 to December 1990. The segment last broke fully in large earthquakes of December, 28, 1945 (M s =7.9) and May 6, 1947 (M s =7.7.), and its higher seismic potential has been recognized byMcCann et al., (1979). Recently the segment broke partially in two smaller events of February, 8, 1987 (M s =7.4) and October 16, 1987 (M s =7.4), leaving still unbroken areas.We observe from focal mechanisms that the outer-rise along the whole segment was under pronounced compression from the late 60's to at least October 1987 (with exception of the tensional earthquake of December 11, 1985), signifying the mature stage of the earthquake cycle. Simultaneously the slab at intermediate depths below 40 km was under tension before the earthquake of October 16, 1987. That event, with a smooth rupture lasting 32 sec, rupture velocity of 2.0 km/sec, extent of approximately 70 km and moment of 1.2×1027 dyne-cm, did not change significantly the compressive state of stress in the outer-rise of that segment. The earthquake did not fill the gap completely and this segment is still capable of rupturing either in an earthquake which would fill the gap between the 1987 and 1971 events, or in a larger magnitude event (M s =7.7–7.9), comparable to earthquakes observed in that segment in 1906, 1945 and 1947.  相似文献   

10.
Probabilistic seismic hazard analysis (PSHA) has been carried out for Iraq. The earthquake catalogue used in the present study covers an area between latitude 29°–38.5° N and longitude 39°–50° E containing more than a thousand events for the period 1905–2000. The entire Iraq region has been divided into thirteen seismogenic sources based on their seismic characteristics, geological setting and tectonic framework. The completeness of the seismicity catalogue has been checked using the method proposed by Stepp (1972). The analysis of completeness shows that the earthquake catalogue is not complete below Ms=4.8 for all of Iraq and seismic source zones S1, S4, S5, and S8, while it varies for the other seismic zones. A statistical treatment of completeness of the data file was carried out in each of the magnitude classes. The Frequency Magnitude Distributions (FMD) for the study area including all seismic source zones were established and the minimum magnitude of complete reporting (Mc) were then estimated. For the entire Iraq the Mc was estimated to be about Ms=4.0 while S11 shows the lowest Mc to be about Ms=3.5 and the highest Mc of about Ms=4.2 was observed for S4. The earthquake activity parameters (activity rate , b value, maximum regional magnitude mmax) as well as the mean return period (R) with a certain lower magnitude mmin m along with their probability of occurrence have been determined for all thirteen seismic source zones of Iraq. The maximum regional magnitude mmax was estimated as 7.87 ± 0.86 for entire Iraq. The return period for magnitude 6.0 is largest for source zone S3 which is estimated to be 705 years while the smallest value is estimated as 9.9 years for all of Iraq.The large variation of the b parameter and the hazard level from zone to zone reflects crustal heterogeneity and the high seismotectonic complexity. The seismic hazard near the source boundaries is directly and strongly affected by the change in the delineation of these boundaries. The forces, through which the geological structure along the plate boundary in Eastern and Northeastern Iraq are evolved, are still active causing stress-strain accumulation, deformation and in turn producing higher probabilities of earthquake activity. Thus, relatively large destructive earthquakes are expected in this region. The study is intended to serve as a reference for more advanced approaches and to pave the path for the probabilistic assessment of seismic hazard in this region.  相似文献   

11.
The main objective of the research work isthe homogenisation of the two recentAlgerian earthquake catalogues for thecommon covered period of time, from 1900 to1990, for the region under considerationlimited by [33°N–38°N,4°E-9.5°E] and the updatingof the catalogue for the twentieth century(1900–2000). To mitigate the deficiencyof the incompleteness of catalogue, aneffort was made to establish a correlationbetween surface-wave magnitude Ms andbody-wave magnitude mb in the form ofMs = a + b (mb). A complete, exact andhomogeneous earthquake catalogue as much aspossible, comprising 870 seismic events,has been compiled. Seismicity analysis ofthe region shows a strong concentration ofseismicity along a band of no more than400 km width oriented mainly in theeast-west direction parallel to the coast.Moreover, earthquakes in this zone arerather associated to strike-slip mechanism.The focal mechanism show a regional stressregime that corresponds to horizontalcompression in NW-SE to N-S direction. As aresult of the review of the seismicity ofnorth-eastern Algeria from the compilationof checked and corrected data and itscorrelation with other geologic andgeophysical investigations based ondocumentary sources, it was possible toconstruct a most complete seismotectonicmap. It leads also to delineate fourseismogenic zones in the Tellian Atlas, aless important zone in the Saharan Atlas, asixth zone at the boundary of both Atlasand finally, a seventh one along thecoastal zone. The seismicity-active faultscorrelation of some of these defined zonesis examined in details with a specialattention to the Saharan Atlas zone, theHodna and Biban zone as well as Soummam andBabor zone where further research workallowed to find some neotectonic featuresconsidered as a significant sign of recenttectonic activity.  相似文献   

12.
Starting from the classical empirical magnitude-energy relationships, in this article, the derivation of the modern scales for moment magnitude M w and energy magnitude M e is outlined and critically discussed. The formulas for M w and M e calculation are presented in a way that reveals, besides the contributions of the physically defined measurement parameters seismic moment M 0 and radiated seismic energy E S, the role of the constants in the classical Gutenberg–Richter magnitude–energy relationship. Further, it is shown that M w and M e are linked via the parameter Θ = log(E S/M 0), and the formula for M e can be written as M e = M w + (Θ + 4.7)/1.5. This relationship directly links M e with M w via their common scaling to classical magnitudes and, at the same time, highlights the reason why M w and M e can significantly differ. In fact, Θ is assumed to be constant when calculating M w. However, variations over three to four orders of magnitude in stress drop Δσ (as well as related variations in rupture velocity V R and seismic wave radiation efficiency η R) are responsible for the large variability of actual Θ values of earthquakes. As a result, for the same earthquake, M e may sometimes differ by more than one magnitude unit from M w. Such a difference is highly relevant when assessing the actual damage potential associated with a given earthquake, because it expresses rather different static and dynamic source properties. While M w is most appropriate for estimating the earthquake size (i.e., the product of rupture area times average displacement) and thus the potential tsunami hazard posed by strong and great earthquakes in marine environs, M e is more suitable than M w for assessing the potential hazard of damage due to strong ground shaking, i.e., the earthquake strength. Therefore, whenever possible, these two magnitudes should be both independently determined and jointly considered. Usually, only M w is taken as a unified magnitude in many seismological applications (ShakeMap, seismic hazard studies, etc.) since procedures to calculate it are well developed and accepted to be stable with small uncertainty. For many reasons, procedures for E S and M e calculation are affected by a larger uncertainty and are currently not yet available for all global earthquakes. Thus, despite the physical importance of E S in characterizing the seismic source, the use of M e has been limited so far to the detriment of quicker and more complete rough estimates of both earthquake size and strength and their causal relationships. Further studies are needed to improve E S estimations in order to allow M e to be extensively used as an important complement to M w in common seismological practice and its applications.  相似文献   

13.
The size of major tsunamigenic earthquakes which occurred in the Japan Sea is quantified on the basis of seismic and tsunamigenic source parameters. The tsunami magnitude Mt is determined from the instrumental tsunami-wave amplitudes. The Mt values thus obtained are on average 0.2 units larger than the values of moment magnitude Mw, though the Mt scale has originally been adjusted to agree with Mw. Moreover, the volume of displaced water at the source is on average 2.3 times as large as that for the Pacific events with a comparable Mw. Nevertheless, the observed height of the sea-level disturbance at the source is found consistent with the amount of crustal deformation computed for the seismic fault models. These results indicate that the tsunami source potential itself is large for Mw in comparison with the Pacific events. The large source potential is explained in terms of the effective difference both in the rigidity of the source medium and in the geometry of the fault motion. For the Japan Sea events, the Mt scale still provides the physical measure of the tsunami potential, and Mt minus 0.2 corresponds to Mw. This predicts that the maximum amplitude of tsunami waves from Japan Sea earthquakes is at least two times as large as that from Pacific earthquakes with a comparable Mw.  相似文献   

14.
The magnitudes (M S , m bP , m bS ) of the largest historical earthquakes which occurred in the first half of the 20 th century, calculated on the basis of records of Wiechert horizontal seismographs in Göttingen (Germany) and Zagreb (Croatia), are compared with one another, as well as with the magnitudes reported in worldwide catalogues. Systematic trends are observed in the data regarding the temporal stability of magnitude estimations in Göttingen, as well as the apparent non-linearity of the instrument responsle in the case of the Wiechert seismograph in Zagreb. We were unable to clearly identify their causes – possible explanations include effects caused by the interaction of the seismometer's frame and mass, as well as local soil conditions, but nonhomogeneity of the reference catalogues cannot be ruled out. The results indicate that a careful re-examination and cross-checking of the reported magnitude figures for the earthquakes from the first half of the 20th century is required.  相似文献   

15.
Earthquakes in Iran and neighbouring regions are closely connected to their position within the geologically active Alpine-Himalayan belt. Modern tectonic activity is forced by the convergent movements between two plates: The Arabian plate, including Saudi Arabia, the Persian Gulf and the Zagros Ranges of Iran, and the Eurasian plate. The intensive seismic activity in this region is recorded with shallow focal depth and magnitude rising as high as Mw = 7.8. The study region can be attributed to a highly complex geodynamic process and therefore is well suited for multifractal seismicity analysis. Multifractal analysis of earthquakes (mb ≥ 3) occurring during 1973 – 2006 led to the detection of a clustering pattern in the narrow time span prior to all the large earthquakes: Mw = 7.8 on 16.9.1978; Mw = 6.8 on 26.12.2003; Mw = 7.7 on 10.5.97. Based on the spatio-temporal clustering pattern of events, the potential for future large events can be assessed. Spatio-temporal clustering of events apparently indicates a highly stressed region, an asperity or weak zone from which the rupture propagation eventually nucleates, causing large earthquakes. This clustering pattern analysis done on a well-constrained catalogue for most of the fault systems of known seismicity may eventually aid in the preparedness and earthquake disaster mitigation.  相似文献   

16.
We have employed 10 digital records and computed the spectral magnitude and the seismic radiated energy for 18 large earthquakes (M s≥6) occurred in Eur-asian belt during 1986–1989. The nine digital stations (CD-SN) distribute all over China and one in Germany. The spectral magnitudes of various period have different stability among stations. The stability is better for maximum spectral magnitudemi and seismic radiated energyE, their differences among stations are smaller, especially for the stations where the ray path main penetrates the low mantle. But the stability of corner period is usually not good. The relation between seismic radiated energy and seismic moment magnitudeM w is lg (E)=1.5Mw+c, wherec is a constant. The maximum spectral magnitudemi=M w+0.1, it is consistant with theoretical prediction. The Chinese version of this paper appeared in the Chinese edition ofActa Seismologica Sinica,15, 418–426, 1993. This work supported by the Deutsche Forschungsgemeinschaft, Bonn, F. R. Germany. The support is grateful acknowledge.  相似文献   

17.
Earthquakes trigger other earthquakes and build up clusters in space and time that in turn create a bias in seismic catalogues. Therefore, declustering is considered as a prerequisite in seismic studies, particularly for probabilistic seismic hazard analysis, not only to eliminate the bias but also to decouple mainshocks and triggered events. However, a declustering process is not a straightforward task due to the complex nature of earthquake phenomena. There exist several declustering methods that mostly employ subjective rules to distinguish between background seismicity and offsprings. Eventually, the final declustered catalogues usually deviate significantly according to the employed method. This issue is raising some concerns, such as how to select the most suitable declustering algorithm, or to assess how this selection affects seismic hazard assessment. In consequence, the main goal of this paper is to quantify the sensitivity of seismic hazard assessments to different declustering techniques. Accordingly, the recently compiled Turkish earthquake catalogue was declustered by making use of three declustering algorithms. A total of six declustered catalogues, two catalogues per method, one by implementing the default input parameters, and one by altering the free input parameters of the employed methods, were produced. The clusters of selected earthquakes were studied in terms of the spatial–temporal distribution of earthquake sequences. A sensitivity analysis was conducted through the major steps of seismic hazard assessment for Istanbul metropolitan city. The seismicity of Istanbul and surroundings was modeled on the basis of four areal source zones. Comparative studies showed that, while the selected declustering algorithm did not significantly affect the completeness periods of moderate to large size earthquakes, it considerably altered those of small magnitude events (e.g. Mw 4.3–5.2) and consequently the recurrence parameters of the source zones. Depending on the declustering algorithm and input parameters, the activity rate was observed to vary up to a factor of two. The differences in the declustered catalogues obtained from different declustering approaches resulted in considerable variations in seismic hazard estimations. The hazard maps at return periods of 475 and 2475 years indicated that peak ground acceleration values may vary up to 20% at some locations. Moreover, the differences in 5% damped elastic spectral accelerations at T = 0.2 for the return periods of 475 and 2475 years are about 18 and 12%, respectively, on the southern shores of Istanbul where the highest hazard levels are observed.  相似文献   

18.
The method of relative seismic moment tensor determination proposed byStrelitz (1980) is extended a) from an interactive time domain analysis to an automated frequency domain procedure, and b) from an analysis of subevents of complex deep-focus earthquakes to the study of individual source mechanism of small events recorded at few stations.The method was applied to the recovery of seismic moment tensor components of 95 intermediate depth earthquakes withM L=2.6–4.9 from the Vrancea region, Romania. The main feature of the obtained fault plane solutions is the horizontality ofP axes and the nonhorizontal orienaation ofT axes (inverse faulting). Those events with high fracture energy per unit area of the fault can be grouped unambiguously into three depth intervals: 102–106 km, 124–135 km and 141–152 km. Moreover, their fault plane solutions are similar to ones of all strong and most moderate events from this region and the last two damaging earthquakes (November 10, 1940 withM W=7.8 and March 4 1977 withM W=7.5) occurred within the third and first depth interval, respectively. This suggests a possible correlation at these depths between fresh fracture of rocks and the occurrence of strong earthquakes.  相似文献   

19.
Seismicity and Seismic Hazard in Alexandria (Egypt) and its Surroundings   总被引：3，自引：0，他引：3  
— Alexandria City has suffered great damage due to earthquakes from near and distant sources, both in historical and recent times. Sometimes the source of such damages is not well known. Seismogenic zones such as the Red Sea, Gulf of Aqaba-Dead Sea Hellenic Arc, Suez-Cairo-Alexandria, Eastern-Mediterranean-Cairo-Faiyoum and the Egyptian costal area are located in the vicinity of this city. The Egyptian coastal zone has the lowest seismicity, and therefore, its tectonic setting is not well known. The 1998 Egyptian costal zone earthquake is a moderate complex source. It is composed of two subevents separated by 4 sec. The first subevent initiated at a depth of 28 km and caused a rupture of strike (347°), dip (29°) and slip (125°). The second subevent occurred at a shallower depth (24 km) and has a relatively different focal parameter (strike 334°, dip 60° and slip 60°). The available focal mechanisms strongly support the manifestation of a complex stress regime from the Hellenic Arc into the Alexandria offshore area. In the present study a numerical modeling technique is applied to estimate quantitative seismic hazard in Alexandria. In terms of seismic hazard, both local and remote earthquakes have a tremendous affect on this city. A local earthquake with magnitude Ms = 6.7 at the offshore area gives peak ground acceleration up to 300 cm/sec2. The total duration of shaking expected from such an earthquake is about three seconds. The Fourier amplitude spectra of the ground acceleration reveals that the maximum energy is carried by the low frequency (1–3 Hz), part of the seismic waves. The largest response spectra at Alexandria city is within this frequency band. The computed ground accelerations due to strong earthquakes in the Hellenic Arc, Red Sea and Gulf of Aqaba are very small (less than 10 cm/sec2) although with long duration (up to 3 minutes).  相似文献   

20.
GEOALGAR Project: First Results on Seismicity and Fault-plane Solutions   总被引：1，自引：0，他引：1  
  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号