共查询到20条相似文献，搜索用时 62 毫秒
1.
简要概括了国内外叠层橡胶垫基础隔震技术的应用发展状况，介绍了隔震结构的各种反应分析模型，对隔震结构设计分析方法进行了讨论，提出了有益的建议，并指出了在《建筑抗震设计规范》（GB50011-2001）关于隔震结构的简化计算方法中存在的诸多不足。结合我国的隔震技术应用现状，引入了两阶段设计法的概念。此方法将有利于提高设计质量，减少设计周期。 相似文献
2.
多层隔震结构两阶段设计法 总被引：1，自引：0，他引：1
结合《建筑抗震设计规范》(GB50011-2001),提出了针对隔震装置设计的隔震结构两阶段设计法。该方法在项目的方案阶段,根据项目的基本情况采用简化估算方法对隔震层进行估算,为方案的确定提供依据;在施工图设计阶段,采用时程分析方法对隔震层进行设计计算,为上部结构和基础设计及隔震装置的选用提供依据。文中以4层多层框架结构体系为例进行了分析,结果显示提出的设计方法具有简便,符合工程应用的特点,且该方法有利于提高设计质量,减少设计周期。 相似文献
3.
组合基础隔震在建筑工程中的应用 总被引：2，自引：1，他引：2
隔震作为一种新的抗震技术,已广泛应用于新建和加固的建筑工程,同时,许多新型式的支座得到了开发和应用。组合基础隔震是一种新的隔震设计思想,能充分应用不同类型隔震支座的特性,有效降低上部结构地震反应。本文介绍了组合基础隔震在某一工程中的应用,工程中使用的支座包括普通橡胶隔震支座、铅芯橡胶隔震支座和弹性滑板支座三种类型,对全部使用支座进行了常规检测,结构计算采用等效线性法、能量包络法和时程反应分析等方法,计算结果表明:组合基础隔震能有效降低上部结构的反应,隔震层的变形控制在安全范围之内。 相似文献
4.
在隔震结构Benchmark模型的基础上,建立了相应的动力反应计算方法及计算程序,并在理想化隔震层刚度布置的情况下研究了隔震层水平刚度分布对基础隔震结构地震响应的影响.通过针对Benchmark模型设计的3种隔震方案的计算结果比较表明:当隔震层刚度中心靠近结构质心时,能显著降低结构的扭转反应,但同时增大了水平位移分量.文中在隔震结构Benchmark模型上建立的计算方法和结论为隔震体系计算和隔震方案设计提供了可靠的依据和途径. 相似文献
5.
对一基础隔震钢筋混凝土框架结构在无填充墙情况下进行了环境激励下的动力测试,重点利用Hilbert-Huang变换与随机减量技术相结合的方法识别了其模态参数,并与随机子空间识别法、有理分式多项式法识别的结果进行了对比。识别结果表明在环境激励下,基础隔震结构的基本周期远小于多遇和罕遇地震工况下设计计算的基本周期;等效黏滞阻尼比很小,近乎于基础固定模型。对隔震层阻尼特性的分析表明,环境激励下可以将基础隔震结构视为经典的比例阻尼系统。进一步以识别的模态参数为基准,采用优化的方法数值反演了环境激励下该结构隔震层的实际水平等效刚度,结果表明其值为多遇地震下计算刚度取值的10.75倍。 相似文献
6.
以一个3跨4排柱建筑为例,对非隔震结构和隔震结构在竖向荷载作用下的内力分布特点进行了对比研究,其中考虑了隔震层顶部梁板结构的荷载、刚度以及结构的梁柱刚度比等因素的影响.研究中发现,与非隔震结构相比,隔震结构一层柱子的柱端弯矩明显增大,隔震层顶部梁的梁端弯矩与其倚载成正比等规律.同时提出了基于非隔震结构的隔震结构在竖向荷载作用下内力的计算方法和“隔震影响系数”的概念.即,隔震结构的内力等于非隔震结构的内力乘以“隔震影响系数”.其中还进一步对“隔震影响系数”的影响因素进行了定量研究,得出了“隔震影响系数”的计算公式.本文所提出的计算方法与隔震结构在水平地震荷载作用下的内力计算方法思路一致,因此,该方法也进一步完善了隔震结构的设计理论. 相似文献
7.
本文在文献（１），（２）建立的基础隔震体系实用计算模型的基础上，提出了几种上部结构加速度反应的计算量，并获得了这几种速度计算量的传递函数及频率特征曲线，由此，提出了基础隔震垫动态参数的选取方法，本文方法合理，实用，可靠，对建立基础隔震体系实用设计计算方法具有一定的意义。 相似文献
8.
高层隔震结构非线性地震响应分析及设计方法研究 总被引：3，自引：0，他引：3
高层隔震结构的分析理论和设计方法是目前隔震技术向高层建筑推广的2个关键理论问题。本文以高烈度区宿迁市已经竣工的高层隔震建筑阳光大厦为工程实例,对高层隔震结构的非线性地震响应分析方法进行了研究,包括隔震支座竖向不同拉压刚度的模拟、各种类型的隔震支座水平力学特性的准确模拟,以及不同地震动输入方式和输入角度对隔震支座受拉情况的影响分析等;在此基础上,对隔震层的设计方法进行了分析,提出了隔震层设计的基本原则,进而给出了控制隔震层设计的基本指标,包括隔震支座的长期面压、极值面压、隔震层偏心率等;最后,对高层隔震结构的相关构造要求进行了必要的说明。 相似文献
9.
基础隔震结构的能量设计方法 总被引：11，自引：2，他引：9
本文以能量分析方法为基础,解释了基础隔震结构体系的能量设计原理和设计准则。根据作者建立的标准能量设计反应谱曲线,结合我国现行的抗震设计规范,建立了基础隔震结构体系的能量设计方法,通过能量平衡关系对隔层的变形反应进行预测．最后通过算例说明能量设计方法具有一定的可靠性,为该类体系的进一步推广奠定了基础。 相似文献
10.
层间隔震技术评述 总被引：37，自引：5，他引：32
祁皑 《地震工程与工程振动》2004,24(6):114-120
层间隔震结构是隔震技术的新发展,它将隔震层设置在建筑物某层柱子和楼板之间进行结构的地震反应控制。层间隔震结构在减震机理、振动特性以及设计方法等诸多方面有别于基础隔震结构和屋盖隔震结构。本文对层间隔震结构的适用范围、优点以及其在实际工程中的应用情况进行了综述,最后,指出了层问隔震结构需要进一步研究的问题。现有的研究成果和工程应用情况表明,层间隔震结构具有明确的减震效果,施工方便,是一种具有发展前途的减震体系。 相似文献
11.
The principles of operation and force–displacement relationships of three novel spherical sliding isolation bearings are developed in this paper. These bearings are completely passive devices, yet exhibit adaptive stiffness and adaptive damping. That is, the stiffness and damping change to predictable values at calculable and controllable displacement amplitudes. The primary benefit of adaptive behavior is that a given isolation system can be separately optimized for multiple performance objectives and/or multiple levels of ground shaking. With the devices presented here, this is accomplished using technology that is inherently no more complex than what is currently used by the civil engineering profession. The internal construction consists of various concave surfaces and behavior is dictated by the different combinations of surfaces upon which sliding can occur over the course of motion. As the surfaces upon which sliding occurs change, the stiffness and effective friction change accordingly. A methodology is presented for determining which surfaces are active at any given time based on the effective radius of curvature, coefficient of friction and displacement capacity of each sliding surface. The force–displacement relationships and relevant parameters of interest are subsequently derived based on the first principles. Copyright © 2007 John Wiley & Sons, Ltd. 相似文献
12.
Coupling behavior of shear deformation and end rotation of elastomeric seismic isolation bearings 
下载免费PDF全文
下载免费PDF全文 This paper presents a mechanical model for predicting the behavior of elastomeric seismic isolation bearings subject to combined end rotations and shear deformation. The mechanical model consists of a series of axial springs at the top, mid‐height and bottom of the bearing to vertically reproduce asymmetric bending moment distribution in the bearings. The model can take into account end rotations of the bearing, and the overall rotational stiffness includes the effect of the variation of vertical load on the bearing and the imposed shear deformation. Static bending tests under various combinations of vertical load and shear deformation were performed to identify the mechanical characteristics of bearings. The test results indicate that bearing rotational stiffness increases with increasing vertical load but decreases with increasing shear deformation. Simulation analyses were conducted to validate the new mechanical model. The results of analyses using the new model show very good agreement with experimental observations. A series of seismic response analyses were performed to demonstrate the dynamic behavior of top‐of‐column isolated structures, a configuration where the end rotations of isolation bearings are typically expected to be larger. The results suggest that the end rotations of elastomeric bearings used in practical top‐of‐column isolated structures do not reduce the stability limit of isolation system. Copyright © 2016 John Wiley & Sons, Ltd. 相似文献
13.
The development of an expansion double spherical seismic isolation (DSSI) bearing by modifying the fixed DSSI bearing is described in this paper.The expansion DSSI bearing is characterized by its good ... 相似文献
14.
A roller seismic isolation bearing is proposed for use in highway bridges. The bearing utilizes a rolling mechanism to achieve seismic isolation and has a zero post‐elastic stiffness under horizontal ground motions, a self‐centering capability, and unique friction devices for supplemental energy dissipation. The objectives of this research are to investigate the seismic behavior of the proposed bearing using parametric studies (1) with nonlinear response history analysis and (2) with equivalent linear analysis according to the AASHTO guide specifications, and by comparing the results from both analysis methods (3) to evaluate the accuracy of the AASHTO equivalent linear method for predicting the peak displacement of the proposed bearing during an earthquake. Twenty‐eight ground motions are used in the studies. The parameters examined are the sloping angle of the intermediate plate of the bearing, the amount of friction force for supplemental energy dissipation, and the peak ground acceleration levels of the ground motions. The peak displacement and base shear of the bearing are calculated. Results of the studies show that a larger sloping angle does not reduce the peak displacement for most of the parametric combinations without friction devices. However, for parametric combinations with friction devices, it allows for the use of a higher friction force, which effectively reduces the peak displacement, while keeping a self‐centering capability. The AASHTO equivalent linear method may underestimate the peak displacement by as much as 40%. Vertical ground motions have little effect on the peak displacement, but significantly increase the peak base shear. Copyright © 2009 John Wiley & Sons, Ltd. 相似文献
15.
16.
三维隔震(振)支座的工程应用与现场测试 总被引：2，自引：0，他引：2
首先介绍了一种新型三维隔震(振)支座,该支座由联接件、竖向隔振支座和水平隔震支座组成。竖向隔振支座和水平隔震支座具有较小刚度,采用该类型支座的隔震结构,其竖向基频和水平基频可远离地铁、铁路振动和地震的主频,从而实现竖向隔振和水平隔震作用。其次介绍了该三维隔震(振)支座在某一地铁平台上部结构中的应用情况,对该类型支座进行了竖向性能和水平性能试验。最后对三维隔震(振)结构与传统结构进行了地铁运行时结构振动的对比测试。测试结果表明:三维隔震(振)系统对振动的高频信号具有显著衰减效果。 相似文献
17.
Optimized earthquake response of multi‐storey buildings with seismic isolation at various elevations
The response of multi‐storey structures can be controlled under earthquake actions by installing seismic isolators at various storey levels. By vertically distributing isolation devices at various elevations, the designer is provided with numerous options to appropriately adjust the seismic performance of a building. However, introducing seismic isolators at various storey levels is not a straightforward task, as it may lead to favourable or unfavourable structural behaviour depending on a large number of factors. As a consequence, a rather chaotic decision space of seismic isolation configurations arises, within which a favourable solution needs to be located. The search for favourable isolators' configurations is formulated in this work as a single‐objective optimization task. The aim of the optimization process is to minimize the maximum floor acceleration of the building under consideration, while constraints are specified to control the maximum interstorey drift, the maximum base displacement and the total seismic isolation cost. A genetic algorithm is implemented to perform this optimization task, which selectively introduces seismic isolators at various elevations, in order to identify the optimal configuration for the isolators satisfying the pre‐specified constraints. This way, optimized earthquake response of multi‐storey buildings can be obtained. The effectiveness of the proposed optimization procedure in the design of a seismically isolated structure is demonstrated in a numerical study using time‐history analyses of a typical six‐storey building. Copyright © 2012 John Wiley & Sons, Ltd. 相似文献
18.
新型单自由度基础隔震体系简化计算方法研究 总被引：4，自引：1，他引：4
本文建立了一种新型的单自由度体系基础隔震结构实用设计方法，该方法考虑了上部结构的变形、简便，合理，可靠，与传统抗震设计方法概念比较接近，便于在工程应用中推广。 相似文献
19.
A new base‐isolation mechanism corresponding to a variance of the stepping A‐shaped frame is proposed and its seismic performance is investigated numerically for strong ground accelerations with peak values in the range from 0.5 to 1g. In its simplest two‐dimensional form, the system consists of a frame with two telescoping legs pinned at the apex at a sharp angle. The legs are attached to the foundation through a spring and a damper acting in parallel. Both the springs and viscous dampers have bilinear characteristics that make them very stiff in compression but very soft in tension. As the structure rocks sideways, the length of the loaded leg remains essentially constant while the length of the unloaded leg increases. When the ground acceleration changes direction, the process is reversed. The resulting system has three main characteristics: (i) as the structure steps on a rigid leg, the maximum acceleration that can be transmitted to the superstructure is limited to a value which is approximately independent of the amplitude of the ground motion; (ii) there is a systematic lifting of the superstructure with kinetic energy being systematically transformed into potential energy during the strong phase of the ground motion; and (iii) the system is slowly self‐centering at the end of the earthquake. The seismic performance of the system is evaluated for a tall bridge pier and for a smaller frame that could be used in a multi‐story building. The results obtained for the 1940 El Centro ground motion scaled to 1g and for the near‐field Rinaldi ground motion recorded during the Northridge earthquake show that substantial reductions of the absolute acceleration can be obtained with reasonable relative displacements of the superstructure and small strokes in the isolation devices. Copyright © 2004 John Wiley & Sons, Ltd. 相似文献
20.
Petros Komodromos Panayiotis C. Polycarpou Loizos Papaloizou Marios C. Phocas 《地震工程与结构动力学》2007,36(12):1605-1622
Numerical simulations and parametric studies have been used to investigate the influence of potential poundings of seismically isolated buildings with adjacent structures on the effectiveness of seismic isolation. Poundings are assumed to occur at the isolation level between the seismically isolated building and the surrounding moat wall. After assessing some common force‐based impact models, a variation of the linear viscoelastic impact model is proposed to avoid tensile impact forces during detachment, while enabling the consideration of permanent plastic deformations at the vicinity of the impact. A large number of numerical simulations of seismically isolated buildings with different characteristics have been conducted under six earthquake excitations in order to investigate the influence of various design parameters and conditions on the peak floor accelerations and interstorey deflections during poundings. The numerical simulations demonstrate that poundings may substantially increase floor accelerations, especially t the base floor where impacts occur. Higher modes of vibration are excided during poundings, increasing the interstorey deflections, instead of retaining an almost rigid‐body motion of the superstructure, which is aimed with seismic isolation. Impact stiffness seems to affect significantly the acceleration response at the isolation level, while the displacement response is more insensitive to the variation of the impact stiffness. Finally, the results indicate that providing excessive flexibility at the isolation system to minimize the floor accelerations may lead to a building vulnerable to poundings, if the available seismic gap is limited. Copyright © 2007 John Wiley & Sons, Ltd. 相似文献