共查询到17条相似文献，搜索用时 578 毫秒
1.
2.
针对三维／二维地质结构开发了大地电磁阻抗张量分解技术,利用该技术仅需对各个独立测点的大地电磁资料进行分析即可分离和消除由三维局部异常体引起的其附近测点的ＭＴ响应函数的形态扭曲畸变。 相似文献
3.
由于浅部、局部不均匀三维异常体的影响,大地电磁测深(Magnetotelluric,MT)观测数据往往需要进行畸变校正.本文针对相位张量不受局部电场畸变影响的特点,研究相位张量分析约束下的大地电磁测深(MT)阻抗张量GB(Groom-Bailey)分解方法.分析由相位张量得到的相关参数,结合初步电性结构维性判断及二维或近似二维电性结构条件下电性主轴方向等信息,设计较合理的GB阻抗张量分解初始模型,提高GB算法的稳定性及可靠性.同时,在传统GB分解求解模型的基础上,将各向异性参数引入目标函数,并采用共轭梯度法进行模型的最优化求解.理论数据计算结果表明,MT阻抗张量GB分解方法的计算结果,依赖于初始模型中电性主轴角、阻抗张量值等参数的选择,相位张量分析约束下的GB分解方法能有效改善算法的稳定性和计算结果的可靠性.此外,研究表明,在合理的初始模型选择下,较之传统的GB分解方法,尽管各向异性参数仍旧无法求出,但带各向异性参数的GB分解方法在计算效率和结果可靠性方面均具有一定的优势.选择实际大地电磁测深点数据进行方法验证,取得了理想的电性分析结果. 相似文献
4.
5.
6.
7.
本文对大地电磁观测阻抗实施一种数学变换--"共轭阻抗变换",发现转换后的观测阻抗和区域阻抗之间存在特定的关系,这种特定关系不受电场局部畸变的影响,而且同样不需要关于地下区域结构维性的假设,在区域结构是三维的情况下也是成立的.对转换后的观测阻抗采用已有的Swift旋转方法即可求得区域主轴方位角,然后采用最优化方法求取区域阻抗相位、振幅以及畸变因子.同时根据转换后的观测阻抗重新定义了不受电场局部畸变影响的构造维性参数.采用合成理论数据验证了新算法的正确性,和Swift、Bahr、GB、相位张量、WAL方法进行了对比分析,并将新方法应用于实测资料的解释,发展了一套消除局部畸变和进行构造维性分析的MT精细资料处理技术.进一步的工作是将新算法推广到多点多频,并采用最优化技术分解,发展一种稳定性好、多测点多频点的阻抗张量分解技术. 相似文献
8.
本文针对Groom-Bailey分解法在消除地表电性不均匀体对MT数据的畸变效应时存在的问题引入遗传算法,对基于传统线性最优化方法的GB分解算法进行改进,提出基于遗传算法的大地电磁阻抗张量分解方法.通过对理论合成数据以及三维/二维模型正演数据的分解试验,并且对青藏高原北缘阿尔金断裂地区实际MT数据进行分解处理,证明了基于遗传算法的GB分解能够更加有效地校正三维/二维情况下近地表三维电性不均匀体所造成的畸变影响.最后,在已有算法基础上,研究了基于遗传算法的多频率GB分解算法和MT数据静校正算法,并通过实际MT数据的处理证明了这些算法的有效性. 相似文献
9.
当地表存在三维非均匀电导率分布时,区域大地电磁响应发生畸变. 以往对这种畸变研究多假设近地表为三维,区域构造为一维或二维. 对于更一般的三维/三维构造,为了分析并消除这种畸变影响,真实反映地下三维区域构造信息,本文实现了三维大地电磁相位张量积分方程数值算法,并研究在不同地质模型下相位张量响应. 结果表明,相位张量不仅可以反映一般三维构造信息,亦可有效反映复杂近地表构造下三维区域构造信息,而无须假设区域构造为一维或二维,证明相位张量具有较强抗近地表局部非均匀构造干扰能力,能够保持更为一般的三维区域构造信息. 为了加快正演计算,同时保持一定精度,算法采用了积分方程多网格法. 相似文献
10.
11.
The Magnetotelluric Phase Tensor: A Critical Review 总被引：1，自引：0，他引：1
John R. Booker 《Surveys in Geophysics》2014,35(1):7-40
12.
局部畸变问题曾经困扰大地电磁资料反演解释几十年,大地电磁三维数值模拟技术的发展为剖析局部畸变特点和得到可靠的反演成像结果提供了技术基础。本文采用三维数值模拟成像方法对典型三维局部畸变模型进行模拟分析。三维数值模拟结果显示:电场分量垂直电性分界面的极化模式视电阻率曲线(对应二维情况下TM模式)在穿越低阻异常体界面时,曲线会先上移后下移,而在穿越高阻异常体界面时,曲线会先下移后上移,这与电性分界面处积累面电荷产生的二次电场有关。三维模型中XY模式、YX模式视电阻率和相位在三维异常体附近的水平变化是呈现近似垂向对称的,该现象与电场垂直跨越电性界面时视电阻率的变化规律是吻合的,当测线分别沿X方向和Y方向展布时,三维情况下的XY和YX模式分别对应二维情况下的TM模式。低阻小异常体对区域构造响应的畸变影响比高阻小异常体要严重。低阻小异常体对二维区域响应的两种极化模式视电阻率和相位都有非常明显的畸变影响,相比较而言对TE模式的畸变要大于TM模式,因此我们在做二维反演解释时,可优先考虑拟合TM模式数据。位于小异常体中心上方测点的三维畸变响应虽然与对应真实二维区域响应的差异比较大,但可以等效于某种二维模型响应,这种由局部畸变造成的假二维响应在实际野外数据的解释中是需要注意的。 相似文献
13.
在前人研究基础上,对Groom-Bailey(GB)张量分解畸变因子和区域阻抗的求解方法进行了改进.首先,通过Swift旋转与GB分解的扭变和剪切矩阵的求逆变换,利用变换后区域阻抗主对角元素为0的条件获得关于扭变因子和剪切因子的超定方程组,采用模拟退火全局优化算法进行求解.其次,由得到的扭变因子和剪切因子,结合Swift旋转确定的走向角和区域阻抗元素的估计,作为非线性最小二乘局部优化算法的初始值,对GB分解定义式的超定方程组进行求解,得到各畸变参数和区域阻抗的解.通过模型试验验证了方法的正确,对方法的稳定性进行了比较与评价,并通过与已有结果的对比和实际资料的应用,表明了方法实际应用的效果. 相似文献
14.
On Two-Dimensional Modeling Of Magnetotelluric Field Data 总被引：5，自引：0，他引：5
Yasuo Ogawa 《Surveys in Geophysics》2002,23(2-3):251-273
In this paper, some recent topics on the modeling of magnetotelluric data are introduced. The focus is on the handling of real field data for two-dimensional resistivity modeling. First, the removal of the effects of near surface heterogeneity is reviewed. It covers telluric distortions (phase mixing and static shift) and magnetic distortions using conventional Groom-Bailey type 3D/2D model (three-dimensional local anomaly underlain by regional two-dimensional structure). The extension of a 3D/2D distortion model for multi-site, multi-frequency is a new development. Magnetic distortion seems to be less significant for land observations, but significant for sea floor data, where the regional magnetic field is weak due to seawater. In special cases involving for example, distortion due to topography and bathymetry, explicit removal is possible. There are some schemes proposed for a 3D/3D model (three-dimensional local anomaly underlain by regional three-dimensional structure). Along with the removal of the distortion, it is important to recognize the dimensionality of the dataset prior to modeling. A property using strike estimates for each site is an indicator for dimensionality which is unaffected by local distortion. Mapping the local strike or a rose diagram is an effective visualization of the dimensionality.Two-dimensional inversion is becoming routine. For the fast calculation of derivatives, approximate calculation, reciprocity or conjugate gradient methods are used. In order to incorporate a priori information and to overcome the intrinsic ill-posed nature of the inversion problem, imposing constraints on the model structure is important. A proper tradeoff between the data fit and constraints should be optimized to obtain minimum structures that are required by the field data. However, the choice of constraints is rather subjective and depends on the geological situations. For field data, two-dimensional inversion has limits on modes, area, and period range. Special care must be taken for the structure outside the profile. Two-dimensional inversion incorporating anisotropy is interesting and becoming popular, but the structure may not be unique. Future development in three-dimensional inversion for real datasets should take the above points into consideration. 相似文献
15.
大地电磁测深(MT)的观测数据易受到由近地表小尺度非均匀体或地形起伏引起的电流型畸变干扰,消除或压制这种干扰对获取可靠的深部电性结构至关重要.当区域结构为二维时,电流型畸变可采用张量分解等方法予以消除或压制.当区域结构为三维时,畸变问题更加复杂和严重,传统张量分解方法往往效果不佳或无效,严重地制约了MT三维反演技术的实用性.对此,本文提出一种考虑电流型畸变的MT三维反演算法,将完整的电流型畸变参数引入到目标函数,并采用非线性共轭梯度法与电阻率参数同时反演,从而达到压制畸变的目的.该算法有两个关键点:一是通过分析实测数据所遭受畸变的分布特征,在目标函数中对其进行有效约束;二是在迭代过程中,通过自适应地调整双正则化因子保障算法的稳定和效率.理论模型测试结果显示,常规三维反演算法不能合理解释数据中的畸变成分,而只能通过引入虚假异常体强制地拟合受畸变数据,从而造成电阻率模型严重失真.与之相比,本文算法能够在反演中自动求解各测点所受到的畸变,获得更接近真实的电阻率模型. 相似文献
16.
Three-dimensional (3D) magnetotelluric (MT) surveys have been performed in Jeju, the largest volcanic island in Korea to figure out any possible structures or potential anomaly for remnant deep geothermal resources. Various approaches have been applied to interpret MT data observed in Jeju. MT dataset shows generally simple stratigraphy of four layers, though contains the severe static and the sea-effects. In our previous works, the induction vectors and 3D inversion results have commonly indicated the existence of a conductive anomaly in central parts of the island, beneath Mt. Halla. The 3D inversion dealt the static shifts as inversion parameters. The Jeju MT dataset, however, still contains the effect of conductive sea water surrounding the island.The sea-effect on MT impedance can be represented as a distortion tensor and excluded from the Jeju MT dataset by an iterative sea-effect correction. In this study, 3D inversion incorporating static shift parameterization was conducted using MT dataset corrected using 1D resistivity model obtained from the iterative scheme. Reasonably reconstructed images are obtained through the 3D inversion and using the MT dataset with sea-effect correction. The inversion result still shows the conductive anomaly in a similar depth. RMS misfits converged to a lower value than that of inversion using MT data before the sea-effect correction. From the fact, it is highly possible that the conductive anomaly is not an artifact but a real underground structure. Further investigation about the anomaly including exploration drilling is needed to see if it is from a fracture containing conductive sea water or related to the old volcanic activities. 相似文献
17.
B. Sh. Singer 《Surveys in Geophysics》1992,13(4-5):309-340
Subsurface inhomogeneities can be classified in three categories depending on the comparison of their sizes against the effective skin depth and “adjustment distance”. These categories are geological noise, local and regional inhomogeneities. Due to its random nature, geological noise leads to uncontrollable distortions of the magnetotelluric field. Such methods as curve shifting, distortion tensor techniques, decomposition and spatial filtering can effectively be used to correct for static shift caused by geological noise. It is shown that the effects of local and regional subsurface inhomogeneities reduce to static shifts of MT-curves when rather rigid conditions are satisfied. The methods used to suppress the effect of geological noise have limited applicability to local and regional inhomogeneities, which can be accurately accounted for only by modelling. 相似文献