首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 15 毫秒
1.
兰州马衔山-兴隆山活动断裂系的构造变形特征和机制   总被引:8,自引:0,他引:8  
详细考察获得了兰州马衔山—兴隆山活动断裂系4条断裂的几何细结构、新活动性等定量资料。其中马衔山北缘断裂为一条规模大、活动性强的全新世逆左旋走滑断裂,而马衔山南缘断裂、兴隆山南缘断裂和兴隆山北缘断裂等其它3条断裂均为其伴生的逆断裂,为晚更新世活动断裂。它们在深部均可以归并到马衔山北缘断裂这一主走滑断裂带上,是兰州地区重要的控震断裂,影响和制约着本区的地震活动。  相似文献   

2.
兰州马衔山北缘断裂带的新活动特征   总被引:7,自引:1,他引:7       下载免费PDF全文
通过详细地质填图研究获得了兰州马衔山北缘断裂带的几何学、新活动性、断错微地貌及滑动速率等的定量资料。马衔山北缘断裂为一条历史悠久的区域性活动断裂 ,其几何形态较简单 ,总体走向N6 0°W ,全长约 115 .5km。根据断裂分叉、拐弯及不连续阶区等几何特征和活动性的差异 ,大致可以将该断裂划分为 4条次级断层段 ,自东向西分别称为内官营段、马衔山段、七道梁段和雾宿山段。断裂的新活动具分段性 ,其中的内官营段为具逆断特性的晚更新世活动段 ,而马衔山段、七道梁段和雾宿山段均为全新世活动段。该断裂早期具逆断特性 ,大约自中更新世以来以左旋走滑为主兼具倾滑运动分量 ,形成了一系列山脊、冲沟、阶地等的左旋断错 ,断距几米至几百米。沿断裂带的水平位移具分组现象 ,可能反映了断裂的黏滑活动特性。根据Ⅰ ,Ⅱ级阶地的左旋断错值及其年代 ,得到了马衔山北缘断裂带晚更新世以来的平均水平滑动速率约为 3.73mm/a。同时沿断裂带还保存有断崖和断坎等 ,其中Ⅰ级阶地上的断坎高 1~ 1.5m左右  相似文献   

3.
龙门山北部陕甘川交界三角构造区断裂活动特征研究   总被引:2,自引:0,他引:2  
龙门山北部3条不同走向的断裂带所围限的三角地区是我国陕甘川交界地区研究地震活动的重要场所.通过对区内秦岭南缘断裂、 平武—青川断裂、 岷江断裂及虎牙断裂活动特征研究和活动时代分析认为: 秦岭南缘断裂, 包括迭部—舟曲断裂、 武都—康县—略阳断裂及茶店—勉县断裂在晚更新世曾有过活动, 在全新世活动不明显; 龙门山断裂带东北段平武—青川断裂最后一次活动发生在晚更新世, 表现为右旋走滑的逆断裂, 全新世活动不明显; 岷江断裂和虎牙断裂不但在晚更新世活动强烈, 而且在全新世继续活动; 龙门山北部这个三角地区依然是未来地震活动关注的重点地区.   相似文献   

4.
Within the framework of the international DESIRE (DEad Sea Integrated REsearch) project, a dense temporary local seismological network was operated in the southern Dead Sea area. During 18 recording months, 648 events were detected. Based on an already published tomography study clustering, focal mechanisms, statistics and the distribution of the microseismicity in relation to the velocity models from the tomography are analysed. The determined b value of 0.74 leads to a relatively high risk of large earthquakes compared to the moderate microseismic activity. The distribution of the seismicity indicates an asymmetric basin with a vertical strike-slip fault forming the eastern boundary of the basin, and an inclined western boundary, made up of strike-slip and normal faults. Furthermore, significant differences between the area north and south of the Bokek fault were observed. South of the Bokek fault, the western boundary is inactive while the entire seismicity occurs on the eastern boundary and below the basin-fill sediments. The largest events occurred here, and their focal mechanisms represent the northwards transform motion of the Arabian plate along the Dead Sea Transform. The vertical extension of the spatial and temporal cluster from February 2007 is interpreted as being related to the locking of the region around the Bokek fault. North of the Bokek fault similar seismic activity occurs on both boundaries most notably within the basin-fill sediments, displaying mainly small events with strike-slip mechanism and normal faulting in EW direction. Therefore, we suggest that the Bokek fault forms the border between the single transform fault and the pull-apart basin with two active border faults.  相似文献   

5.
2003年青海德令哈M6.6地震序列的活动特征   总被引:1,自引:0,他引:1  
分析了2003年4月17日青海省德令哈6.6级地震序列活动的空间和时间变化特征及其发震构造,得到以下结果:①主震发生在地震活跃区与相对平静区的分界带上;②主震后半个多月内余震快速衰减,初期余震持续到7月底,以后平静了4个多月,接着震源区东部又发生第2期余震活动,连续发生5次5.0级以上地震,最大余震震级5.9;③震源区...  相似文献   

6.
The sinistral strike-slip characteristic of the Altyn Tagh Fault gradually disappears near the Jiuxi Basin at the west end of Hexi Corridor, and the Kuantanshan Fault and the northern marginal fault of Heishan on its east are thrust structures. There are two faults distributed in the north of Kuantanshan, namely, the Taerwan-Chijiaciwo Fault and the Ganxiashan Fault, both are featured with obvious activity. Predecessors thought that the Taerwan-Chijiaciwo Fault is a thrust fault with low movement rate, but there is few detailed study on its horizontal motion. Is there horizontal strike-slip movement in the northern marginal fault of Kuantanshan? This issue has an important significance to further explore the structural transformation mode between the Altyn Tagh strike-slip faults and the northern thrust faults in the north margin of Qilianshan. Using high resolution remote sensing images and field work, such as combining with UAV SfM photogrammetry, the paper studies the strike-slip characteristics of the Taerwan-Chijiaciwo Fault and Ganxiashan Fault on the northern margin of Kuantanshan, and get two preliminary understandings:(1) The northern marginal fault of Kuantanshan is an active right-lateral strike-slip fault with thrust component, the horizontal to vertical dislocation ratio is about 3-4 times. Based on the statistics of dislocation amount of the gullies and terraces along the north marginal Kuantanshan fault, it is preliminarily estimated that the late Pleistocene right-lateral strike-slip rate is about 0.2-0.25 mm/a and the Holocene right-lateral strike-slip rate is about 0.5-1.5 mm/a. (2) The main driving force to the tectonics at the western end of Hexi Corridor, where the northern marginal fault of Kuantanshan locates, comes from the northward extrusion of the Qilian Mountains, which results in the right-lateral strike-slip of the northern marginal fault of Kuananshan and the thrust movement of several faults inside the Jiuxi Basin. The effect of the Altyn Tagh Fault on other tectonic structures is not obvious in this region.  相似文献   

7.
Introduction Hexi Corridor, a corridor extended over 1 000 km and with a strike of WNW-ESE, is locatedbetween Alxa uplift and northern Qilianshan Caledonian folding belt of northern Qinghai-Xizang(Tibet) Plateau (Figure 1). In the paper, we will discuss the regions between Altun fault and Yu-mushan of the western Hexi Corridor, where the climate is arid, which results in sparse vegetation,but abundant oil and gas resource, and being one of the most important petroleum industry base…  相似文献   

8.
青海拉脊山断裂带新活动特征的初步研究   总被引:10,自引:0,他引:10  
拉脊山断裂带由拉脊山北缘断裂和拉脊山南缘断裂两条向NE凸出的弧形断裂所组成,分别长约230km和220km。它们是介于NNW向的热水一日月山右旋走滑断裂带和NWW向的西秦岭北缘左旋走滑断裂带之间的一个大型挤压构造区和构造转换带,也是分隔拉脊山南北两侧的西宁一民和盆地和循化一化隆盆地的重要边界断裂。沿断裂带的追踪考察,发现了其新活动的部分地质地貌证据。其最新活动时代为晚更新世晚期(仅局部为全新世早期),性质以挤压逆冲为主稍具左旋特征。该断裂的新活动可能导致了该区20余次5级左右中等地震的发生。可以说,拉脊山地区既是反映构造活动,又是反映地震活动的地震构造窗。  相似文献   

9.
Strike-slip faults and normal faults are dominant active tectonics in the interior of Tibetan plateau and control a series of basins and lakes showing extension since the Late Cenozoic, by contrast with the thrust faulting along the orogenic belts bordering the plateau. The late Neotectonic movement of those faults is key information to understand the deformation mechanism for Tibetan plateau. The Gyaring Co Fault is a major active right-lateral strike-slip fault striking~300° for a distance of~240km in central Tibet, in south of Bangong-Nujiang suture zone. The Gyaring Co Fault merges with the north-trending Xainza-Dinggye rift near the southern shore of Gyaring Co. From NW to SE, Dongguo Co, Gemang Co-Zhangnai Co, Zigui Co-Gyaring Co form the Gyaring Co fault zonal drainage basin. Some scholars have noticed that the formation of lakes and basins may be related to strike-slip faults and rift, but there is no analysis on the Gyaring Co fault zonal drainage basin and its response to regional tectonics. In recent years, a variety of quantitative geomorphic parameters have been widely used in the neotectonic systems to analyze the characteristics of the basin and its response mechanism to the tectonic movement. In this paper, we applied ASTER GDEM data on the ArcGIS platform, extracted the Gyaring Co fault zonal drainage basin based on Google Earth images (Landsat and GeoEye) and field work. We acquired basic geomorphic parameters of 153 sub-basin (such as grade, relief, average slope, area) and Hypsometric Index (HI) value and curve. Statistical results have indicated significant differences in scale(area and river network grade)in north and south sides of the fault. Southern drainage basins' relief, slope, HI value are higher than the northern basins, and the overall shape of hypsometric curve of northern basins are convex compared with southern concavity. Along the strike of the Gyaring Co Fault, average slope, and HI value are showing generally increasing trending and hypsometric curve become convex from west to east. By comparing and analyzing the lithology and rainfall conditions, we found that they have little influence on the basic parameters and HI value of drainage basins. Therefore, the changes of basin topographic differences between northern and southern side of fault and profile reveal the Gyaring Co Fault has experienced differential uplift since the late Cenozoic, southern side has greater uplift compared to the north side, and the uplift increased from NW to SE, thus indicate that normal faulting of the Gyaring Co Fault may enhanced by the Xainza-Dinggye rift. The early uplift of the Gangdise-Nyainqentanglha Mountain in late Cenozoic might provide northward inclined pre-existing geomorphic surfaces and the later further rapid uplift on the Gangdise-Nyaingentanglha Mountain and Xainza-Dinggye rift might contribute to the asymmetrical development of the Gyaring Co fault zonal drainage basin.  相似文献   

10.
Based on abundant aftershock sequence data of the Wenchuan MS8.0 earthquake on May 12, 2008, we studied the spatio-temporal variation process and segmentation rupture characteristic. Dense aftershocks distribute along Longmenshan central fault zone of NE direction and form a narrow strip with the length of 325 km and the depth between several and 40 km. The depth profile (section of NW direction) vertical to the strike of aftershock zone (NE direction) shows anisomerous wedgy distribution characteristic of aftershock concentrated regions; it is related to the force form of the Longmenshan nappe tectonic belt. The stronger aftershocks could be divided into northern segment and southern segment apparently and the focal depths of strong aftershocks in the 50 km area between northern segment and southern segment are shallower. It seems like 'to be going to rupture' segment. We also study focal mechanisms and segmentation of strong aftershocks. The principal compressive stress azimuth of aftershock area is WNW direction and the faulting types of aftershocks at southern and northern segment have the same proportion. Because aftershocks distribute on different secondary faults, their focal mechanisms present complex local tectonic stress field. The faulting of seven strong earthquakes on the Longmenshan central fault is mainly characterized by thrust with the component of right-lateral strike-slip. Meantime six strong aftershocks on the Longmenshan back-range fault and Qingchuan fault present strike-slip faulting. At last we discuss the complex segmentation rupture mechanism of the Wenchuan earthquake.  相似文献   

11.
基于地震剖面解释的构造分析表明,河西走廊西段及邻区发育有许多晚第三纪-第四纪的逆断层与走滑断层. 其主要类型有两种:一是与北祁连逆冲推覆作用有关的南倾逆断层,其走向北西,主要分布于北祁连山东北缘及河西走廊西南部地区;二是与阿尔金断裂活动有关的逆断层与走滑断层,主要分布于红柳峡、宽台山——合黎山地区. 这些断层与新生代始新世末期以来印-藏碰撞的远距离效应有关. 它们于晚第三纪开始活动,主要活动于第四纪时期,而且大多目前仍在活动,属于活动性断层,是河西走廊地区地震的潜发因素. 此外,它们还造成了地层的强烈变形,形成了一系列的地貌阶地和河流的水平错移.   相似文献   

12.
利用P、SH、SV波的初动及振幅比获得2001年4月至2012年8月山东及附近区域132次地震震源机制解,对该区域地震断层的错动性质及地壳应力场特征进行分析.结果表明,山东及附近区域地震断层错动的基本方向为北东向和北西向,错动方式以走向滑动为主,部分为斜向滑动.分区研究表明:聊考断裂带附近区域所受挤压作用相对较强,逆断型地震破裂较多;胶东半岛及北侧海域所受拉张作用略占优势,逆断型地震破裂较少;沂沭断裂带南部附近区域逆断型与正断型的地震破裂所占比例差别不大.  相似文献   

13.
准噶尔盆地古生代末大地构造动力学数值模拟   总被引:2,自引:2,他引:0       下载免费PDF全文
大地构造动力学数值模拟是构造物理研究的重要方向.本文利用有限元数值模拟方法研究准噶尔盆地古生代末的构造应力场.根据准噶尔盆地西部岩墙群和准噶尔盆地内部及周边地区应力标志,确定了晚二叠世准噶尔地区最大主应力方向为NW-SE向,方位在295°左右,局部地区略有偏转.以实测古构造应力场为拟合标志,对Seng(o)r和Alle...  相似文献   

14.
红河断裂带第四纪右旋走滑与尾端拉张转换关系研究   总被引:29,自引:4,他引:29       下载免费PDF全文
虢顺民  向宏发 《地震地质》1996,18(4):301-309
红河断裂带早第四纪以来发生的大规模右旋走滑运动,导致断裂北段尾端的质量亏损,形成了拉张区。右旋走滑量为7.1km左右,拉张区右旋方向上的扩张量为5.35km左右,二者相互转换的量级是基本一致的,从而定量地证实了它们之间的成因联系  相似文献   

15.
汶川MS8.0地震余震震源机制时空分布特征   总被引:6,自引:0,他引:6       下载免费PDF全文
本文利用CAP波形反演方法,获取了汶川MS8.0地震序列中312个具有较高信噪比波形资料的4级以上余震的震源机制解和震源深度. 基于震源深度空间分布与震源机制时空分布,分析了主震后余震区断层行为特征与应力场时空变化,并对龙门山断裂带中北段的发震断层面几何形态进行了初步探讨. 获得的主要认识如下:(1)余震震源深度分布存在显著的空间分段差异. 绵竹以西的余震区南段与平武以东的北段余震深度范围大于中段(绵竹-平武段),但深度小于5 km的5级以上超浅源地震主要分布在明显偏离龙门山断裂带走向的理县NW向分支与余震区北端NNE向分支,而中段余震主要分布在7~19 km深度. (2)余震机制类型存在明显的时空差异. 余震区中段逆冲型地震占绝对优势,理县NW向分支余震则以走滑型为主,机制类型随时间变化不显著. 沿龙门山断裂带走向的余震区南段,早期(2008年8月底前)逆冲型地震比例高于走滑型、晚期走滑型地震比例显著升高并超过逆冲型;而余震区北段早期走滑型地震占绝对优势、晚期逆冲型地震比例大幅上升且超过走滑型. 南、北两段余震机制类型比例的显著变化,可能是余震区两端断层调整性运动的表现. (3)节面走向及P轴方位优势方向均存在显著的空间差异. 南段NWW向P轴方位与区域应力场一致,中段及理县NW向分支P轴优势方向NEE,而北段具NWW和NEE两个优势方向,这种差异反映了余震活动除了受区域应力场控制外,还受到主震引发的局部应力场的控制. 节面走向的多方位分布则反映不同走向的构造参与了主震后的余震活动. (4)沿龙门山断裂带走向,余震区南段具深部缓倾角、浅部高倾角的铲形断面特征;中段深部倾角均值较稳定、浅部倾角均值随深度减小而增大;北段倾角均值相对稳定,显示其断面几何形态相对简单. 上述不同区段倾角均值随深度的变化揭示龙门山断裂带中北段断层面几何形态复杂.  相似文献   

16.
本研究通过对东构造结及其周边地区主要断裂进行野外考察,通过GPS观测数据和地质、地球物理资料的综合分析,建立三维有限元模型;运用数值模拟方法对东构造结周边地区主要断裂现今运动特征进行模拟研究,取得一些初步的认识:(1)东构造结北侧和东侧地块总体上围绕构造结发生顺时针旋转,右旋走滑的东南边界断裂不是嘉黎断裂,可能是阿帕龙...  相似文献   

17.
川滇块体东边界主要断裂带现今运动特征分析   总被引:2,自引:1,他引:1       下载免费PDF全文
基于2009年以来的GPS观测数据,利用块体模型和GPS剖面方法分别计算川滇块体东边界主要断裂带的滑动速度,并结合跨断裂带的区域应变时间序列分析断裂带现今的运动特征。结果表明:从速度场变化来看,2013—2015期的速度场在川滇块体东北部有东向增加的微弱变化;从滑动速率结果来看,鲜水河北段的左旋走滑运动有所增强,拉张运动有所增加;小江断裂带的左旋走滑运动普遍有微弱的增强;从去掉线性的区域应变时间序列结果来看,小江断裂带南段主张应变在2014年底出现了趋势性转折,值得进一步关注。  相似文献   

18.
岷山隆起的构造地貌学研究   总被引:40,自引:7,他引:40       下载免费PDF全文
赵小麒  陈社发 《地震地质》1994,16(4):429-439
岷山隆起为一第四纪强烈抬升区,构成川西高原的西界。岷山隆起的东、西边界分别受岷江断裂与虎牙断裂的控制,为地震活动带,南部向龙门山构造带过渡。岷江断裂北段的第四纪活动始于距今2Ma以前,为一逆走滑断层,观测到的左旋位移量为2.4km,左旋滑动速率为1mm/a。岷江断裂控制了沿隆起西界分布的地震活动,包括1933年叠溪和1960年漳腊地震  相似文献   

19.
The Gobi Altai region of southwestern Mongolia is a natural laboratory for studying processes of active, transpressional, intracontinental mountain building at different stages of development. The region is structurally dominated by several major E—W left-lateral strike-slip fault systems. The North Gobi Altai fault system is a seismically active, right-stepping, left-lateral, strike-slip fault system that can be traced along the surface for over 350 km. The eastern two-thirds of the fault system ruptured during a major earthquake (M = 8.3) in 1957, whereas degraded fault scarps cutting alluvial deposits along the western third of the system indicate that this segment did not rupture during the 1957 event but has been active during the Quaternary. The highest mountains in the Gobi Altai are restraining bend uplifts along the length of the fault system. Detailed transects across two of the restraining bends indicate that they have asymmetric flower structure cross-sectional geometries, with thrust faults rooting into oblique-slip and strike-slip master faults. Continued NE-directed convergence across the fault system, coupled with left-lateral strike-slip displacements, will lead to growth and coalescence of the restraining bends into a continuous sublinear range, possibly obscuring the original strike-slip fault system; this may be a common mountain building process.

The largely unknown Gobi-Tien Shan fault system is a major left-lateral strike-slip fault system (1200 km + long) that links the southern ranges of the Gobi Altai with the Barkol Tagh and Bogda Shan of the easternmost Tien Shan in China. Active scarps cutting alluvial deposits are visible on satellite imagery along much of its central section, indicating Quaternary activity. The total displacement is unknown, but small parallel splays have apparent offsets of 20 + km, suggesting that the main fault zone has experienced significantly more displacement. Field investigations conducted at two locations in southwestern Mongolia indicate that late Cenozoic transpressional uplift is still active along the fault system. The spatial relationship between topography and active faults in the Barkol Tagh and Bogda Shan strongly suggests that these ranges are large, coalescing, restraining bends that have accommodated the fault's left-lateral motion by thrusting, oblique-slip displacement and uplift. Thus, from a Mongolian perspective, the easternmost Tien Shan formed where it is because it lies at the western termination zone of the Gobi-Tien Shan fault system. The Gobi-Tien Shan fault system is one of the longest fault systems in central Asia and, together with the North Gobi Altai and other, smaller, subparallel fault systems, is accommodating the eastward translation of south Mongolia relative to the Hangay Dome and Siberia. These displacements are interpreted to be due to eastward viscous flow of uppermost mantle material in the topographically low, E–W trending corridor between the northern edge of the Tibetan Plateau and the Hangay Dome, presumably in response to the Indo-Eurasian collision 2500 km to the south.  相似文献   


20.
The 40km-long, NEE trending Reshui-Taostuo River Fault was found in the southern Dulan-Chaka highland by recent field investigation, which is a strike-slip fault with some normal component. DEM data was generated by small unmanned aerial vehicle(UAV)on key geomorphic units with resolution<0.05m. Based on the interpretation and field investigation, we get two conclusions:1)It is the first time to define the Reshui-Taostuo River Fault, and the fault is 40km long with a 6km-long surface rupture; 2)There are left-handed dislocations in the gullies and terraces cut by the fault. On the high-resolution DEM image obtained by UAV, the offsets are(9.3±0.5) m, (17.9±1.5) m, and(36.8±2) m, measured by topographic profile recovery of gullies. The recovery measurements of two terraces present that the horizontal offset of T1/T0 is(18.2±1.5) m and the T2/T1 is (35.8±2) m, which is consistent with the offsets from gullies. According to the historical earthquake records, a M5 3/4 earthquake on April 10, 1938 and a MS5.0 earthquake on March 21, 1952 occurred at the eastern end of the surface rupture, which may be related to the activity of the fault. By checking the county records of Dulan and other relevant data, we find that there are no literature records about the two earthquakes, which is possibly due to the far distance to the epicenter at that time, the scarcity of population in Dulan, or that the earthquake occurred too long ago that led to losing its records. The southernmost ends of the Eastern Kunlun Fault and the Elashan Fault converge to form a wedge-shaped extruded fault block toward the northwest. The Dulan Basin, located at the end of the wedge-shaped fault block, is affected by regional NE and SW principal compressive stress and the shear stress of the two boundary faults. The Dulan Basin experienced a complex deformation process of compression accompanying with extension. In the process of extrusion, the specific form of extension is the strike-slip faults at each side of the wedge, and there is indeed a north-east and south-west compression between the two controlling wedge-shaped fault block boundary faults, the Eastern Kunlun and Elashan Faults. The inferred mechanism of triangular wedge extrusion deformation in this area is quite different from the pure rigid extrusion model. Therefore, Dulan Basin is a wedge-shaped block sandwiched between the two large-scale strike-slip faults. Due to the compression of the northeast and southwest directions of the region, the peripheral faults of the Dulan Basin form a series of southeast converging plume thrust faults on the northeast edge of the basin near the Elashan Fault, which are parallel to the Elashan Fault in morphology and may converge with the Elashan Fault in subsurface. The southern marginal fault of the Dulan Basin(Reshui-Taostuo River Fault)near the Eastern Kunlun fault zone is jointly affected by the left-lateral strike-slip Eastern Kunlun Fault and the right-lateral strike-slip Elashan Fault, presenting a left-lateral strike-slip characteristic. Meanwhile, the wedge-shaped fault block extrudes to the northwest, causing local extension at the southeast end, and the fault shows the extensional deformation. These faults absorb or transform the shear stress in the northeastern margin of the Tibet Plateau. Therefore, our discovery of the Dulan Reshui-Taostuo River Fault provides important constraints for better understanding of the internal deformation mode and mechanism of the fault block in the northeastern Tibetan plateau. The strike of Reshui-Taostuo River Fault is different from the southern marginal fault of the Qaidam Basin. The Qaidam south marginal burial fault is the boundary fault between the Qaidam Basin and the East Kunlun structural belt, with a total length of ~500km. The geophysical data show that Qaidam south marginal burial fault forms at the boundary between the positive gravity anomaly of the southern East Kunlun structural belt and the negative gravity anomaly gradient zone of the northern Qaidam Basin, showing as a thrust fault towards the basin. The western segment of the fault was active at late Pleistocene, and the eastern segment near Dulan County was active at early-middle Pleistocene. The Reshui-Taostuo River Fault is characterized by sinistral strike-slip with a normal component. The field evidence indicates that the latest active period of this fault was Holocene, with a total length of only 40km. Neither remote sensing image interpretation nor field investigation indicate the fault extends further westward and intersects with the Qaidam south marginal burial fault. Moreover, it shows that its strike is relatively consistent with the East Kunlun fault zone in spatial distribution and has a certain angle with the burial fault in the southern margin of Qaidam Basin. Therefore, there is no structural connection between the Reshui-Taostuo River Fault and the Qaidam south marginal burial fault.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号