共查询到18条相似文献，搜索用时 78 毫秒
1.
2.
在阿尔卑斯山脉东南部地区进行了震动图（ShakeMap）的实时生成研究。ShakeMap软件系统已经在该地区安装,并已经可以与Antelope数据采集系统获得稳定的界面,能够从波形数据中提取地面运动的参数,并且在地震发生5min内生成震动图。为了评价台站密度的影响,我们计算了2004年博韦茨地震（斯洛文尼亚西北部）的合成地震图,以及不同网格大小虚拟台站的震动图。结果表明,密集且均匀的台站分布是产生精确震动图的基本条件,目前弗留利中部地区的台站密度已经足够可靠地估计最强烈震动区域范围内的震动程度。使用特定地区的地面运动预测方程和从记录到的地面运动预测宏观地震烈度的经验关系,相关的震动图能够实时或准实时地生成。通过弱震动（2007年克劳特地震）和强震动（1998年博韦茨地震）的观测数据和ShakeMap结果的比较,证明了该模型的正确性。 相似文献
3.
4.
发展地震烈度速报系统是我国现阶段防震减灾事业的一项重要工作.其目的是在地震发生后,对强震动数据进行实时分析和处理,快速给出强震对地表的破坏程度——地震烈度分布图.鉴于目前国内强震动台网分布密度及数据传输方式等诸多因素的限制,多数烈度速报系统是基于美国的ShakeMap系统进行二次开发生成烈度分布图,其计算过程更多地依赖于对地震破裂过程的反演及地震烈度衰减关系,产出的烈度图是静态位图,分辨率较低,与丰富的地理信息难以无缝衔接(Wald et al,1999a;张晁军等,2010;泽仁志玛等,2006). 相似文献
5.
考虑场地效应的ShakeMap系统研究 总被引：11，自引：2，他引：9
本文主要以地表地质状况与地形(坡度)的相似性为原则,将中国大陆地区分辨率30″的地形DEM(数字高程模型)数据经过坡度计算后,利用坡度与Vs30(地表至地下30m处的平均剪切波速)的相关关系,得到各场点近似的Vs30值,再用Vs30量化地震动的场地放大系数。将由此建立的场地放大系数运用到本文研发的ShakeMap系统中,校正震后理论计算所得到的基岩地震动参数值,从而获得其地表土层上的地震动参数分布。本文还详细介绍了ShakeMap系统的计算流程、计算模型及相关的软件系统等。最后以应用实例表明ShakeMap系统在中国大陆地区是可用的。 相似文献
6.
ShakeMap及其在地震动快速预估中的应用 总被引：4，自引：1，他引：3
ShakeMap可称为地震动制图系统,是一套近乎实时计算地震动并作出地震动图的程序。它是一些子程序和模块的集合,主要程序用Perl语言编写,用MySQL管理文件,最终用GMT作图。最初由加州地震台网构思并完成系统构建,用于地震震情的快速反映,随着中国大陆强震台网的建立和越来越密集台阵的布设,ShakeMap的应用也更受关注。本文深入讲解ShakeMap的工作原理,尝试在国内架构中应用该系统,以便能快速的得到地震震后的地震动和烈度图,供地震工程学家及震灾抢险工作者使用,文中以2003年MS5.9的赤峰地震为例来探讨ShakeMap在国内应用的可能性及应用局限性。 相似文献
7.
对ADINA的前后处理进行二次开发,采用Fortran语言编写ADINA非线性有限元软件前后处理系统接口软件包,同时研制打分程序,定量判断计算和观测的GPS数据和最大主压应力的相符程度。ADINA前后处理的二次开发,提高ADINA的使用效率和进行地球动力学数值实验的效率,具有必要性和现实意义。 相似文献
8.
本论文内容涵盖传感器组网,数据获取、存储、管理、迁移与服务,以及地震动参数计算与发布等检测系统各个环节,在研究过程中,以地震动参数速报技术研究为主题,并注意把相关的技术应用在实际的工作中。“基于IPV6对地震烈度传感器网络”部分直接使用了ShakeMap开发过程中有关数据流的接收、服务,操作系统的重编译,事件检测,图片产出, 相似文献
9.
AutoCAD作为目前房产测绘内业数据处理的主流软件,具有广泛的适用性,但如何使用AutoCAD软件自动、批量地为多个房屋单元录入属性及数据入库,快速实现图形和属性一体化,是大多数房产测绘工作者所面临的重要问题。多数测绘工作者仍使用人工手动逐项录入房产单元属性的方法,但在房屋单元数量巨大的情况下,不仅工作效率低下,且容易出错。本文介绍AutoLISP与AutoIt软件经过二次开发相结合在房产测绘内业数据整理入库中的应用。 相似文献
10.
利用有限元软件Ansys二次开发语言apdl进行二次开发,将多次透射边界(MTF边界)和弹阻边界(V-S边界)添加到软件中,从而实现对土-结构动力相互作用问题中无限域场地的模拟。以野外大比例(1/2)土-箱基-框架结构试验模型的牵引释放自由振动试验(波源问题)和爆破震动试验(散射问题)数据为基础,通过有限元数值计算结果和试验结果的对比可知,施加了人工边界的土体模型可以较好地模拟波在无限域土体中的传播,有效地减少有限元计算模拟时的计算规模。同时多次透射边界在计算精度以及散射问题中地震波输入的便捷性方面要优于弹阻边界。 相似文献
11.
12.
In accordance with the principle of similarity in geology and topography,the V3S0(the average shear-velocity down to a 30m depth below the surface) approximation of sites is acquired by correlation between V3S0 and slopes after calculating the maximum slope of topography using the 30-sec Chinese Mainland DEM(Digital Elevation Model) data set.Site-amplification factors are then quantified with V3S0 and applied to the ShakeMap system developed by this study to revise ground-motion amplitudes on bedrock estimated from empirical relationships.Finally,the distribution of ground motion parameters on the surface is obtained.This article also introduces the calculation process,calculation models of the ShakeMap systems and related software systems.In conclusion,certain examples indicate that the ShakeMap system is feasible in the Chinese Mainland. 相似文献
13.
The ShakeMap software automatically generates maps of the peak ground motion parameters (shakemaps) and of instrumental intensity
soon after an earthquake. Recorded data are fundamental to obtaining accurate results. In case observations are not available,
ShakeMap relies on ground motion predictive equations, but due to unmodelled site conditions or finite fault effects, large
uncertainties may appear, mainly in the near-source area where damage is relevant. In this paper, we aim to account for source
effects in ShakeMap by computing synthetics to be used for integrating observations and ground motion predictive equations
when near-source data are not available. To be effective, the computation of synthetics, as well as of the finite fault, should
be done in near real time. Therefore, we computed rapid synthetic seismograms, by a stochastic approach, including the main
fault features that were obtained through inversion of regional and teleseismic data. The rapidity of calculation is linked
to a number of assumptions, and simplifications that need testing before the procedure can run in automatic mode. To assess
the performance of our procedure, we performed a retrospective validation analysis considered as case study of the M
w = 6.3 earthquake, which occurred in central Italy on April 6, 2009. In that case, the first shakemaps, generated a few minutes
after the earthquake, suffered large uncertainties on ground motion estimates in an area closer to the epicenter due to the
lack of near-field data. To verify our approach, we recomputed shakemaps for the L’Aquila earthquake, integrating data available
soon after the earthquake at different elapse times with synthetics, and we compared our shaking map with the final shakemap,
obtained when all the data were available. Our analysis evidences that (1) when near-source data are missing, the integration
of real data with synthetics reduces discrepancies between computed and actual ground shaking maps, mainly in the near-field
zone where the damage is relevant and (2) the approach that we adopted is promising in trying to reduce such discrepancies
and could be easily implemented in ShakeMap, but some a priori calibration is necessary before running in an automatic mode. 相似文献
14.
2010年4月14日青海玉树地震震动图 总被引：5，自引：1，他引：4
在2010年4月14日07时49分(北京时间)青海省玉树藏族自治州玉树县(33.2°N,96.6°E)7.1级地震发生后,综合考虑震中地区的地质构造背景、活动断裂分布、震源机制结果、震源破裂过程、我国西部的地震动参数经验衰减关系及局部场地效应的影响,用考虑场地效应的震动图快速生成方法,在震后约2小时后得到玉树地震震中地区的震动图,并提供给相关部门使用.结果表明,此次地震的地震烈度特征预测如下:①烈度的展布方向NW-SE向,与玉树断裂的走向一致;②极震区的烈度为Ⅸ度,面积约为300km2;③烈度Ⅸ度区主要位于震中东南方向沿断裂走向近40km和西北方向沿断裂走向15km之间的区域;④Ⅸ度区的西北端由于局部场地条件的影响,其烈度由基岩参考面的Ⅸ度区降为土层上的Ⅷ度区;⑤Ⅷ度区面积约为3000km2;⑥Ⅶ度区的面积约为8000km2;⑦Ⅵ度区面积约为24000km2. 相似文献
15.
16.
Trevor I. Allen David J. Wald Paul S. Earle Kristin D. Marano Alicia J. Hotovec Kuowan Lin Michael G. Hearne 《Bulletin of Earthquake Engineering》2009,7(3):701-718
We present an Atlas of ShakeMaps and a catalog of human population exposures to moderate-to-strong ground shaking (EXPO-CAT)
for recent historical earthquakes (1973–2007). The common purpose of the Atlas and exposure catalog is to calibrate earthquake
loss models to be used in the US Geological Survey’s Prompt Assessment of Global Earthquakes for Response (PAGER). The full
ShakeMap Atlas currently comprises over 5,600 earthquakes from January 1973 through December 2007, with almost 500 of these
maps constrained—to varying degrees—by instrumental ground motions, macroseismic intensity data, community internet intensity
observations, and published earthquake rupture models. The catalog of human exposures is derived using current PAGER methodologies.
Exposure to discrete levels of shaking intensity is obtained by correlating Atlas ShakeMaps with a global population database.
Combining this population exposure dataset with historical earthquake loss data, such as PAGER-CAT, provides a useful resource
for calibrating loss methodologies against a systematically-derived set of ShakeMap hazard outputs. We illustrate two example
uses for EXPO-CAT; (1) simple objective ranking of country vulnerability to earthquakes, and; (2) the influence of time-of-day
on earthquake mortality. In general, we observe that countries in similar geographic regions with similar construction practices
tend to cluster spatially in terms of relative vulnerability. We also find little quantitative evidence to suggest that time-of-day
is a significant factor in earthquake mortality. Moreover, earthquake mortality appears to be more systematically linked to
the population exposed to severe ground shaking (Modified Mercalli Intensity VIII+). Finally, equipped with the full Atlas
of ShakeMaps, we merge each of these maps and find the maximum estimated peak ground acceleration at any grid point in the
world for the past 35 years. We subsequently compare this “composite ShakeMap” with existing global hazard models, calculating
the spatial area of the existing hazard maps exceeded by the combined ShakeMap ground motions. In general, these analyses
suggest that existing global, and regional, hazard maps tend to overestimate hazard. Both the Atlas of ShakeMaps and EXPO-CAT
have many potential uses for examining earthquake risk and epidemiology. All of the datasets discussed herein are available
for download on the PAGER Web page ().
T. I. Allen and M. G. Hearne—contracted through Synergetics Incorporated. 相似文献
17.
基于2021年2月13日日本福岛Mj7.3级地震加速度记录,离线模拟了阈值预警方法在此次地震中快速估计潜在破坏区的表现。结果显示,该方法能够在台站P波触发后3s就快速对台站及其周边区域进行地震破坏性判断,同时估计的潜在破坏区域也基本与美国地质调查局（USGS） ShakeMap震后实测VII度以上区域吻合,展示了该方法在此次地震中运用的可行性;然而该方法没有对处在震后实测VII度以上区域内的宫城县南部沿海以及福岛县小部分东北区域给出准确的潜在破坏区判断,这一估计偏差为该方法的适应性研究以及下一步优化提供了参考。 相似文献
18.
The evaluation of the potential impact of strong seismic events shortly after their occurrence is a critical step to organise emergency response and consequently minimise the adverse effects of earthquakes. The estimation of the impact from earthquakes considering the observed ground shaking from past events can be useful for the calibration of existing exposure and/or fragility and vulnerability models. This study describes a methodology to combine the publicly available information from the USGS ShakeMap system and the open-source software OpenQuake engine for the assessment of damage and losses. This approach is employed to estimate the number of structural collapses considering the 2012 Magnitude 5.9 Emilia-Romagna (Italy) earthquake and the aggregated economic loss because of the 2010 Magnitude 7.1 Darfield (New Zealand) event. Several techniques to calculate the ground shaking in the affected region considering the spatial and interperiod correlations in the intra-event ground motion residuals are investigated and their influence in the resulting damage or loss estimates are evaluated. 相似文献