共查询到20条相似文献，搜索用时 31 毫秒
1.
《Advances in water resources》1998,22(1):17-31
The Stokes problem describes flow of an incompressible constant-viscosity fluid when the Reynolds number is small so that inertial and transient-time effects are negligible. The numerical solution of the Stokes problem requires special care, since classical finite element discretization schemes, such as piecewise linear interpolation for both the velocity and the pressure, fail to perform. Even when an appropriate scheme is adopted, the grid must be selected so that the error is as small as possible. Much of the challenge in solving Stokes problems is how to account for complex geometry and to capture important features such as flow separation. This paper applies adaptive mesh techniques, using a posteriori error estimates, in the finite element solution of the Stokes equations that model flow at pore scales. Different selected numerical test cases associated with various porous geometrics are presented and discussed to demonstrate the accuracy and efficiency of our methodology. 相似文献
2.
三角网格有限元法具有网格剖分的灵活性,能有效模拟地震波在复杂介质中的传播.但传统有限元法用于地震波场模拟时计算效率较低,消耗较大计算资源.本文采用改进的核矩阵存储(IKMS)策略以提高有限元法的计算效率,该方法不用组合总体刚度矩阵,且相比于常规有限元法节省成倍的内存.对于时间离散,将有限元离散后的地震波运动方程变换至Hamilton体系,在显式二阶辛Runge-Kutta-Nystr9m(RKN)格式的基础之上加入额外空间离散算子构造修正辛差分格式,通过Taylor展开式得到具有四阶时间精度时间格式,且辛系数全为正数.本文从理论上分析了时空改进方法相比传统辛-有限元方法在频散压制、稳定性提升等方面的优势.数值算例进一步证实本方法具有内存消耗少、稳定性强和数值频散弱等优点. 相似文献
3.
A stream tube integration method is introduced to solve transient subsurface fluid flow problems. The method combines a geometry-embedded form of Darcy's Law and the notion of location of average. Two types of problems, transient radial flow to a well of finite radius in an areally infinite aquifer and in a double porosity system, are solved by the stream tube integration method and the integral finite difference method. Results of the solutions show that the stream tube integration method, with fixed coarse mesh, are more accurate and better behaved than the integral finite difference method, with fine mesh. The fixed mesh stream tube integration method is readily extended to the moving mesh method. With much coarse mesh, the moving mesh technique can obtain the same accurate results as the fixed mesh stream tube integration method. It is suggested that the stream tube integration method is a viable way to state, solve, interpret and verify numerical solutions. The method provides efficient computation and improved accuracy for analysing subsurface fluid flow. © 1998 John Wiley & Sons, Ltd. 相似文献
4.
本文实现了一种面向目标自适应海洋可控源电磁三维矢量有限元方法.为满足三维复杂电性结构模拟的需求,网格剖分采用非结构化六面体.在组装刚度矩阵之后,形成的大型复数线性方程组分解为等价的实数形式,利用带预条件的广义最小残差法进行求解.在获得微分方程的解之后,为提高解的准确性,通过面向目标的自适应误差估计来指示网格细化,重点加密能使观测点数值模拟精度提高的网格.对于大规模三维数据,为了使模型空间的并行计算达到均衡负载的效果,我们使用METIS函数库来进行网格计算任务量的划分.最后,通过对比一维解析解与三维自适应矢量有限元计算结果,验证了程序的正确性;通过自适应过程中误差指示子的分布,验证了面向目标自适应的有效性;通过对三维复杂模型进行均衡负载下的并行计算,测试了程序的可扩展性. 相似文献
5.
《Advances in water resources》1998,22(2):185-195
We present an efficient numerical method for solving stochastic porous media flow problems. Single-phase flow with a random conductivity field is considered in a standard first-order perturbation expansion framework. The numerical scheme, based on finite element techniques, is computationally more efficient than traditional approaches because one can work with a much coarser finite element mesh. This is achieved by avoiding the common finite element representation of the conductivity field. Computations with the random conductivity field only arise in integrals of the log conductivity covariance function. The method is demonstrated in several two- and three-dimensional flow situations and compared to analytical solutions and Monte Carlo simulations. Provided that the integrals involving the covariance of the log conductivity are computed by higher-order Gaussian quadrature rules, excellent results can be obtained with characteristic element sizes equal to about five correlation lengths of the log conductivity field. Investigations of the validity of the proposed first-order method are performed by comparing nonlinear Monte Carlo results with linear solutions. In box-shaped domains the log conductivity standard deviation σY may be as large as 1.5, while the head variance is considerably influenced by nonlinear effects as σY approaches unity in more general domains. 相似文献
6.
《Advances in water resources》1999,23(3):229-237
It can be very time consuming to use the conventional numerical methods, such as the finite element method, to solve convection–dispersion equations, especially for solutions of large-scale, long-term solute transport in porous media. In addition, the conventional methods are subject to artificial diffusion and oscillation when used to solve convection-dominant solute transport problems. In this paper, a hybrid method of Laplace transform and finite element method is developed to solve one- and two-dimensional convection–dispersion equations. The method is semi-analytical in time through Laplace transform. Then the transformed partial differential equations are solved numerically in the Laplace domain using the finite element method. Finally the nodal concentration values are obtained through a numerical inversion of the finite element solution, using a highly accurate inversion algorithm. The proposed method eliminates time steps in the computation and allows using relatively large grid sizes, which increases computation efficiency dramatically. Numerical results of several examples show that the hybrid method is of high efficiency and accuracy, and capable of eliminating numerical diffusion and oscillation effectively. 相似文献
7.
《Advances in water resources》2003,26(11):1189-1198
A two-dimensional finite element based overland flow model was developed and used to study the accuracy and stability of three numerical schemes and watershed parameter aggregation error. The conventional consistent finite element scheme results in oscillations for certain time step ranges. The lumped and the upwind finite element schemes are tested as alternatives to the consistent scheme. The upwind scheme did not improve on the stability or the accuracy of the solution, while the lumped scheme provided stable and accurate solutions for time steps twice the size of time steps needed for the consistent scheme. A new accuracy based dynamic time step estimate for the two-dimensional overland flow kinematic wave solution is developed for the lumped scheme. The newly developed dynamic time step estimates are functions of the mesh size, and time of concentration of the watershed hydrograph. Due to lack of analytical solutions, the time step was developed by comparing numerical solutions of various levels of discretization to a reference solution using a very fine mesh and a very small time step. The time step criteria were tested on a different set of problems and proved to be adequate for accurate and stable solutions. A sensitivity analysis for the watershed slope, Manning’s roughness coefficient and excess rainfall rate was conducted in order to test the effect of parameter aggregation on the stability and accuracy of the solution. The results of this analysis show that aggregation of the slope data resulted in the highest error. The roughness coefficient had a smaller effect on the solution while the rainfall intensity did not show any significant effect on the flow rate solution for the range of rainfall intensity used. This work pioneers the challenge of providing guidelines for accurate and stable numerical solutions of the two-dimensional kinematic wave equations for overland flow. 相似文献
8.
Vir&#; Axelle Xiang Jiansheng Milthaler Frank Farrell Patrick Emmet Piggott Matthew David Latham John-Paul Pavlidis Dimitrios Pain Christopher Charles 《Ocean Dynamics》2012,62(10):1487-1501
Fluid–structure interactions are modelled by coupling the finite element fluid/ocean model ‘Fluidity-ICOM’ with a combined finite–discrete element solid model ‘Y3D’. Because separate meshes are used for the fluids and solids, the present method is flexible in terms of discretisation schemes used for each material. Also, it can tackle multiple solids impacting on one another, without having ill-posed problems in the resolution of the fluid’s equations. Importantly, the proposed approach ensures that Newton’s third law is satisfied at the discrete level. This is done by first computing the action–reaction force on a supermesh, i.e. a function superspace of the fluid and solid meshes, and then projecting it to both meshes to use it as a source term in the fluid and solid equations. This paper demonstrates the properties of spatial conservation and accuracy of the method for a sphere immersed in a fluid, with prescribed fluid and solid velocities. While spatial conservation is shown to be independent of the mesh resolutions, accuracy requires fine resolutions in both fluid and solid meshes. It is further highlighted that unstructured meshes adapted to the solid concentration field reduce the numerical errors, in comparison with uniformly structured meshes with the same number of elements. The method is verified on flow past a falling sphere. Its potential for ocean applications is further shown through the simulation of vortex-induced vibrations of two cylinders and the flow past two flexible fibres.
相似文献9.
Axelle Viré Jiansheng Xiang Frank Milthaler Patrick Emmet Farrell Matthew David Piggott John-Paul Latham Dimitrios Pavlidis Christopher Charles Pain 《Ocean Dynamics》2012,62(10-12):1487-1501
Fluid–structure interactions are modelled by coupling the finite element fluid/ocean model ‘Fluidity-ICOM’ with a combined finite–discrete element solid model ‘Y3D’. Because separate meshes are used for the fluids and solids, the present method is flexible in terms of discretisation schemes used for each material. Also, it can tackle multiple solids impacting on one another, without having ill-posed problems in the resolution of the fluid’s equations. Importantly, the proposed approach ensures that Newton’s third law is satisfied at the discrete level. This is done by first computing the action–reaction force on a supermesh, i.e. a function superspace of the fluid and solid meshes, and then projecting it to both meshes to use it as a source term in the fluid and solid equations. This paper demonstrates the properties of spatial conservation and accuracy of the method for a sphere immersed in a fluid, with prescribed fluid and solid velocities. While spatial conservation is shown to be independent of the mesh resolutions, accuracy requires fine resolutions in both fluid and solid meshes. It is further highlighted that unstructured meshes adapted to the solid concentration field reduce the numerical errors, in comparison with uniformly structured meshes with the same number of elements. The method is verified on flow past a falling sphere. Its potential for ocean applications is further shown through the simulation of vortex-induced vibrations of two cylinders and the flow past two flexible fibres. 相似文献
10.
《Advances in water resources》2001,24(8):843-862
We present a numerical scheme for the computation of conservative fluid velocity, pressure and temperature fields in a porous medium. For the velocity and pressure we use the primal–dual mixed finite element method of Trujillo and Thomas while for the temperature we use a cell-centered finite volume method. The motivation for this choice of discretization is to compute accurate conservative quantities. Since the variant of the mixed finite element method we use is not commonly used, the numerical schemes are presented in detail. We sketch the computational details and present numerical experiments that justify the accuracy predicted by the theory. 相似文献
11.
Various numerical methods have been used in the literature to simulate single and multiphase flow in fractured media. A promising approach is the use of the discrete-fracture model where the fracture entities in the permeable media are described explicitly in the computational grid. In this work, we present a critical review of the main conventional methods for multiphase flow in fractured media including the finite difference (FD), finite volume (FV), and finite element (FE) methods, that are coupled with the discrete-fracture model. All the conventional methods have inherent limitations in accuracy and applications. The FD method, for example, is restricted to horizontal and vertical fractures. The accuracy of the vertex-centered FV method depends on the size of the matrix gridcells next to the fractures; for an acceptable accuracy the matrix gridcells next to the fractures should be small. The FE method cannot describe properly the saturation discontinuity at the matrix–fracture interface. In this work, we introduce a new approach that is free from the limitations of the conventional methods. Our proposed approach is applicable in 2D and 3D unstructured griddings with low mesh orientation effect; it captures the saturation discontinuity from the contrast in capillary pressure between the rock matrix and fractures. The matrix–fracture and fracture–fracture fluxes are calculated based on powerful features of the mixed finite element (MFE) method which provides, in addition to the gridcell pressures, the pressures at the gridcell interfaces and can readily model the pressure discontinuities at impermeable faults in a simple way. To reduce the numerical dispersion, we use the discontinuous Galerkin (DG) method to approximate the saturation equation. We take advantage of a hybrid time scheme to alleviate the restrictions on the size of the time step in the fracture network. Several numerical examples in 2D and 3D demonstrate the robustness of the proposed model. Results show the significance of capillary pressure and orders of magnitude increase in computational speed compared to previous works. 相似文献
12.
本文提出了一种基于非结构化网格的海洋电磁有限单元正演算法.为了回避场源奇异性,文中选用二次场算法,将背景电阻率设置为水平层状且各向异性,场源在水平层状各向异性介质中所激发的一次场通过汉克尔积分得到.基于Coulomb规范得到二次矢量位和标量位所满足的Maxwell方程组,通过Galerkin加权余量法形成大型稀疏有限元方程,采用不完全LU分解(ILU)预条件因子的quasi-minimum residual(QMR)迭代解法对有限元方程进行求解得到二次矢量位和标量位;进而,利用滑动平均方法得到二次矢量位和标量位在空间的导数,由此得到二次电磁场;通过一维模型对算法的可靠性进行验证,与此同时,针对实际复杂海洋电磁模型,比较有限元模拟结果与积分方程模拟结果,进一步验证算法精度.若干计算结果均表明,文中算法具有良好的通用性,适用于井中电磁、航空电磁,环境地球物理等非均匀且各向异性介质中的电磁感应基础研究. 相似文献
13.
本文基于非结构网格实现了海洋可控源电磁法三维有限元正演模拟.该算法采用完全非结构网格剖分,可以模拟任意起伏地形和复杂地电模型.为了避免场源的奇异性,采用一次场/二次场分解算法,一次场由基于Schelkunoff势函数的一维解析公式得到.为了提高算法的精度和效率,采用对测点附近单元和异常体区域进行体积约束加密的方法,实现了非结构网格的局部加密.一、二维模型计算和分析表明,本文采用的局部加密方法能够明显地改善算法的精度,最大相对误差基本在1%以内.对三维模型计算及对比分析,说明了该算法对三维可控源电磁正演的实用性.复杂海底地形模型的正演模拟表明,海底地形对电磁场的影响很大,在进行海洋可控源电磁资料解释时,地形的影响有必要考虑在内. 相似文献
14.
This paper describes results from a recent study concerning the numerical modelling of compound channel flow using two generalized two-dimensional finite element codes specifically adapted to floodplain studies: RMA-2 and TELEMAC-2D. By application to an 11 km reach of the River Culum, Devon, UK, simulations are developed to investigate the impact of numerical technique, mesh resolution and topographic parameterization on model results. The research is shown to raise a number of issues concerning the construction, calibration and validation of two-dimensional finite element models for this flow problem. © 1997 by John Wiley & Sons, Ltd. 相似文献
15.
《Advances in water resources》1996,19(2):97-107
Groundwater flow in a 3-D domain with fracture planes is numerically investigated using the finite element method. A flexible mesh generation method for discretization is proposed in this paper. The method, based on Delaunay triangulation, divides the whole domain into subdomains separated by fracture planes. It then triangulates each subdomain independently into tetrahedra which are further subdivided into hexahedra. By putting together all of the meshes of the subdomain, a finite element mesh of the whole domain is obtained. The appropriateness of the mesh generation method is topologically proved. Several applications of the proposed method are given, and the numerical solutions are in good agreement with those obtained with a structured grid. It is concluded that the proposed mesh generation method can replace the structured grid. 相似文献
16.
The coupling upscaling finite element method is developed for solving the coupling problems of deformation and consolidation of heterogeneous saturated porous media under external loading conditions. The method couples two kinds of fully developed methodologies together, i.e., the numerical techniques developed for calculating the apparent and effective physical properties of the heterogeneous media and the upscaling techniques developed for simulating the fluid flow and mass transport properties in heterogeneous porous media. Equivalent permeability tensors and equivalent elastic modulus tensors are calculated for every coarse grid block in the coarse-scale model of the heterogeneous saturated porous media. Moreover, an oversampling technique is introduced to improve the calculation accuracy of the equivalent elastic modulus tensors. A numerical integration process is performed over the fine mesh within every coarse grid element to capture the small scale information induced by non-uniform scalar field properties such as density, compressibility, etc. Numerical experiments are carried out to examine the accuracy of the developed method. It shows that the numerical results obtained by the coupling upscaling finite element method on the coarse-scale models fit fairly well with the reference solutions obtained by traditional finite element method on the fine-scale models. Moreover, this method gets more accurate coarse-scale results than the previously developed coupling multiscale finite element method for solving this kind of coupling problems though it cannot recover the fine-scale solutions. At the same time, the method developed reduces dramatically the computing effort in both CPU time and memory for solving the transient problems, and therefore more large and computational-demanding coupling problems can be solved by computers. 相似文献
17.
《Advances in water resources》1999,22(6):567-575
An algorithm is presented for generating finite element grids that can be used to calculate the position of a fluctuating water table and the formation of seepage faces within a heterogeneous unconfined aquifer. Our approach overcomes limitations with existing techniques by allowing the water table to rise or decline through hydrostratigraphic boundaries yet maintains numerical and conceptual accuracy with respect to hydrostratigraphic geometry. The algorithm involves (1) limited stretching or shrinking of elements along the water table if the change in the position of the water table is small with respect to the vertical grid spacing, and (2) the addition or removal of nodes and elements in the finite element mesh along the water table as the change becomes large with respect to the vertical grid spacing. This technique is applicable to any 2-D or 3-D finite element code that contains an automatic finite-element grid generator. 相似文献
18.
Isolation bearings and dampers are often installed between piers and superstructures to reduce the seismic responses of bridges under large earthquakes. This paper presents a novel steel damper for bridges. The damper employs steel plates as energy dissipation components, and adopts a vertical free mechanism to achieve a large deformation capacity. Quasi-static tests using displacement-controlled cyclic loading and numerical analyses using a finite element program called ABAQUS are conducted to investigate the behavior of the damper, and a design methodology is proposed based on the tests and numerical analyses. Major conclusions obtained from this study are as follows:(1) the new dampers have stable hysteresis behavior under large displacements;(2) finite element analyses are able to simulate the behavior of the damper with satisfactory accuracy; and(3) simplified design methodology of the damper is effective. 相似文献
19.
In order to account for the site-response part of the seismic ground motion coherency for sites of interest, an analytical stochastic methodology is proposed in this paper. By combining the pseudo-excitation method with wave motion finite element simulation techniques, a numerical approach for the computation of the coherency function between observation points is developed firstly. Then the orthogonal expansion method is introduced into this approach to study the effect of the uncertainty in soil properties on the coherency function. Finally some numerical examples are given to show the applicability of the methodology. The computational results demonstrate that the lagged coherency values tend to decrease in the vicinity of the resonant frequencies of the site. 相似文献
20.
根据库伦规范势的定义,推导出关于磁矢量势和电标量势的偏微分方程,为了克服由电流源引起的奇异性和数值模拟计算困难,将电磁总场分解为一次场和二次场,一次场由基于Schelkunoff势函数的一维正演算法得到,二次场由有限元法计算得到,实现了海洋可控源电磁法三维有限元正演算法。通过一维数值模拟实例,验证该算法的计算精度。然后,利用该算法对带海底地形的三层储层模型进行正演,分析了海底地形对海洋控源电磁场各分量产生的影响。 相似文献