共查询到19条相似文献，搜索用时 187 毫秒
1.
1999年9月21日（当地时间）台湾集集7.6级地震是一个逆断层型地震．用回归分析法对台湾集集地震的加速度峰值数据进行分析，得出了这次地震的水平与垂直向的加速度峰值衰减关系．从残差分布上看，位于断层上盘和下盘上的加速度峰值与从衰减关系所得到的结果相比存在不同的系统偏差，断层上盘地表的加速度峰值较高，而下盘地表的加速度峰值较低．从这次地震的加速度峰值分布等值线图上也可以看出，加速度峰值的分布相对于断层呈现明显的不对称性，上盘衰减较慢而下盘衰减较快．在近断层强地面运动研究、地震危险性分析、设定地震研究与震害预测等工作中，应考虑可能地震的震源机制特点，以便使所用的衰减模型更能反映不同地震环境地区的地震动分布特征． 相似文献
2.
野外考察结果表明 ,1999年 9月 2 1日台湾集集大地震是由车笼埔断层发生逆冲作用造成的。地震产生的地表破裂长约 80km ,具有明显的挤压逆断层特征 ,其活动方式为具左旋性质的逆倾滑动。实测逆冲断层以 30°～ 50°的角向西北逆冲而上。断层的垂直位移量 ,南段约 2～ 3m ,北段约 3～ 8m ;断层的水平位移量 ,南段 0～ 3m ,北段 3～ 5m ;垂直断层的水平缩短量 ,南段 2～ 3m ,北段 3～ 6m。从台湾西部麓山带的地质构造剖面分析 ,地震震源恰好位于台湾西部麓山带中生代基底与其上的沉积盖层的界面的深度 ,而西部麓山带第三纪地层和其下的基底的分离面为一滑动面 (decolle ment)。在菲律宾海板块的挤压作用下 ,沿该区中生代基底之上滑动面的错动导致了地震的发生 相似文献
3.
基于有限断层模型的芦山“4·20”7.0级强烈地震强地面运动特征 总被引：1，自引：0，他引：1
基于芦山地震的震源破裂过程反演结果,利用有限断层模型,以芦山地区三维地壳速率结构模型为基础,对芦山“4·20”7.0级强烈地震引起的强地面运动进行了模拟.对这次地震中由典型盲断层引起的强地面运动数值模拟结果反映了与实际震害相近的分布特征:断层上盘的宝盛、龙门及芦山以北位于极震区,也是强地面运动的高强度集中区,特别是垂向分量的速度、加速度峰值均在该地区达到了最大值,最能反映地表震害特征的竖向地震加速度在龙门一带达到了350gal,与极震区Ⅸ度的烈度相当,而在芦山以北龙门一带,瞬时竖向位移峰值高达110cm,这些特征与实际震害分布是非常相近的.综合分析认为,这次地震强地面运动表现出了明显的逆冲断层引起的强地面运动的分布特征,同时在强地震动传播过程中,由于高陡峭地形地貌特征及四川盆地内山间盆地的影响,地形地貌和盆地效应对地震波的反射和放大作用明显加强,也是该地区地震破坏强度增大的重要因素. 相似文献
4.
1999年9月20日集集（台湾）M7.6级地震产生了足够的近源地震数据。这些证实了许多理论预测的断层几何对地震物理过程的影响。这些影响包括上盘运动的增加（在断层迹上最大），在断层北段存在一个从逆冲到显著左旋滑动的过渡以及近场和远场对断层类型，能量和视应力的估计存在不一致性，通过这次地震的严格的三维动力学模型。可看出这些特征与三维非对称断层几何及其与自由表面之间的夹角密切相关。研究结果显示，由于倾滑断层与地表交错，地震的许多重要特征是由断层几何控制的，原则上说是可能提前预测的。 相似文献
5.
１９９９年９月集集（Ｍｗ７．６）地震,由于车笼埔地震断层猛烈地逆冲推挤作用,导致断层沿线地带产生剧烈的场地地震灾害、文中列举车笼埔断层活动引发场地地震灾害的情况,提出该类活断层下盘建筑物的安全距离不应少于３０００ｍ,上盘建筑物的安全距离不应少于５０００ｍ。 相似文献
6.
利用强震数据获取汶川地震近断层地面永久位移 总被引：2，自引：2，他引：0
利用汶川地震中得到的靠近映秀—北川主断裂的64个强震台站的三分量记录数据, 对加速度记录进行基线校正的基础上获取近断层地面运动的永久形变位移, 并将由强震记录获取到的地面位移结果与GPS观测到的同震位移进行对比分析, 研究汶川MS8.0地震的近断层地面运动的位移特征. 结果表明: ① 在靠近映秀—北川主断层的上盘和下盘, 东西相向的地面运动非常剧烈. 下盘的51SFB, 51MZQ和51JYH台东西向位移均为负(即地面运动向西), 其中51SFB台位移量最大, 达到1.49 m; 上盘的51WCW台位移向东, 位移量为1.26 m. ② 地面运动的位移分布主要表现为以龙门山断裂带的映秀—北川断裂为核心的相向运动, 东西方向上的永久位移要大于南北方向. 从断层机制上来讲, 断层的错动以逆冲运动为主(即逆冲位移要大于走滑分量的位移), 这与震源机制反演及地质考察的结果一致. ③ 大的地面永久位移集中分布在以龙门山断裂带为中心的狭长范围内, 离开发震断裂地面位移的衰减很快. 相比而言, 在发震断层的下盘一侧(即四川盆地)的地面位移的衰减比上盘一侧明显要快. 相似文献
7.
利用汶川地震中得到的靠近映秀-北川主断裂的64个强震台站的三分量记录数据,对加速度记录进行基线校正的基础上获取近断层地面运动的永久形变位移,并将由强震记录获取到的地面位移结果与GPS观测到的同震位移进行对比分析,研究汶川Ms8.0地震的近断层地面运动的位移特征.结果表明:①在靠近映秀-北川主断层的上盘和下盘,东西相向的地面运动非常剧烈.下盘的51SFB,51MZQ和51JYH台东西向位移均为负(即地面运动向西),其中51SFB台位移量最大,达到1.49m;上盘的51WCW台位移向东,位移量为1.26 m.②地面运动的位移分布主要表现为以龙门山断裂带的映秀-北川断裂为核心的相向运动,东西方向上的永久位移要大于南北方向.从断层机制上来讲,断层的错动以逆冲运动为主(即逆冲位移要大于走滑分量的位移),这与震源机制反演及地质考察的结果一致.③大的地面永久位移集中分布在以龙门山断裂带为中心的狭长范围内,离开发震断裂地面位移的衰减很快.相比而言,在发震断层的下盘一侧(即四川盆地)的地面位移的衰减比上盘一侧明显要快. 相似文献
8.
使用GPS同震位移资料和远场P波记录,研究了1999年台湾集集地震震源破裂过程．根据地质构造和余震分布引入了一个由弯曲断层面构造的三段“铲状”断层模型．在使用静态GPS位移资料反演集集地震的断层破裂滑动分布时,由于集集地震断层北部近地表破裂的复杂性,在位错模型中考虑拉张分量对地表同震位移的贡献,可更好地同时拟合GPS观测资料的水平和垂向分量．而纯剪切位错弹性半空间模型和分层地壳模型都无法同时拟合水平和垂向GPS观测资料．在此基础上,同时使用静力学同震位移资料和远场地震波形记录,反演集集地震的震源破裂过程．结果表明,一种垂直于断层面的“挤压性”(负)拉张分量几乎集中分布于地震断层的浅部和北部转折处,而这一带地表破裂远较没有(负)拉张分量出现的南部断层复杂．“冒起构造”的数字模拟表明,这种在集集地震破裂转折处及北部断裂带广为出现的典型破裂造成的地表位移可以用具有负拉张分量(挤压)的逆冲断层更好地模拟．而这种负拉张分量(挤压)的分布正是地震破裂性质和几何复杂性的综合反映,震源破裂过程也显示北部转折处破裂在空间和时间上的复杂性.高滑区域与余震分布表现为负相关. 相似文献
9.
10.
对倾向断层中地城的动力学模拟表明,不对称的近源地面运动是由这类断层不对称的几何形态引起的。在初始应力大小相同的情况下,逆（冲）断层引起的地面运动要比正断层 引起的地面运动大２倍或更多。无论是在逆（冲）断层还是正断层引起的地震中,上盘的运动都比下盘的大。地震产生的应力场与地球自由表面的相互作用导致了与时间相关的正应力的立生,从而造成了正断层与逆（冲）断层之间的不对称性。断层上、下两盘的不对称性是由于 相似文献
11.
In situ experiment on retrofit of school buildings by adding sandwich columns to partition brick walls 总被引：1，自引：0，他引：1 
下载免费PDF全文
下载免费PDF全文 Many significantly strong earthquakes have occurred over the years in Taiwan, which have caused tremendous damage to primary and middle school buildings; the 921 Chi‐Chi earthquake was particularly devastating. According to statistics, 786 schools (1,958 classrooms) were damaged on September 21, 1999 during this earthquake event. The devastation showed that a lack of seismic performance is a common problem for existing school buildings in Taiwan. Therefore, the retrofit of existing school buildings has become an urgent issue in the prevention of possible damage in the future. The retrofit technique of adding sandwich columns to partition brick walls is proposed in this paper, and the feasibility of the proposed method was verified by in situ pushover tests of two real school buildings, one without and one with retrofit. The experimental and analytical results show that the sandwich column itself contributes significantly to the seismic capacity of the examined school building. Moreover, the analytical results yielded conservative capacity curves when compared with the experimental results. Copyright © 2013 John Wiley & Sons, Ltd. 相似文献
12.
Debris flows have caused enormous losses of property and human life in Taiwan during the last two decades. An efficient and reliable method for predicting the occurrence of debris flows is required. The major goal of this study is to explore the impact of the Chi‐Chi earthquake on the occurrence of debris flows by applying the artificial neural network (ANN) that takes both hydrological and geomorphologic influences into account. The Chen‐Yu‐Lan River watershed, which is located in central Taiwan, is chosen for evaluating the critical rainfall triggering debris flows. A total of 1151 data sets were collected for calibrating model parameters with two training strategies. Significant differences before and after the earthquake have been found: (1) The size of landslide area is proportioned to the occurrence of debris flows; (2) the amount of critical rainfall required for triggering debris flows has reduced significantly, about half of the original critical rainfall in the study case; and (3) the frequency of the occurrence of debris flows is largely increased. The overall accuracy of model prediction in testing phase has reached 96·5%; moreover, the accuracy of occurrence prediction is largely increased from 24 to 80% as the network trained with data from before the Chi‐Chi earthquake sets and with data from the lumped before and after the earthquake sets. The results demonstrated that the ANN is capable of learning the complex mechanism of debris flows and producing satisfactory predictions. Copyright © 2009 John Wiley & Sons, Ltd. 相似文献
13.
RELOCATION OF THE HUTUBI MS6.2 EARTHQUAKE SEQUENCE ON 8 DECEMBER 2016 AND ANALYSIS OF THE SEISMOGENIC STRUCTURE 下载免费PDF全文
下载免费PDF全文 Based on the digital waveforms of Xinjiang Seismic Network, the Hutubi MS6.2 earthquake sequence (ML ≥ 1.0) was relocated precisely by HypoDD.The best double-couple focal mechanisms of the main shock and aftershocks of ML ≥ 4.0 were determined by the CAP method. We analyzed the characteristics of spatial distribution, focal mechanisms and the seismogenic structure of earthquake sequence. The results show that the main shock is located at 43.775 9°N, 86.363 4°E; the depth of the initial rupture and centriod is about 15.388km and 17km. The earthquake sequence extends unilaterally along NWW direction with an extension length of about 15km and a depth ranging 5~15km. The characteristics of the depth profiles show that the seismogenic fault plane dips northward and the faulting is dominated by thrusting. The nodal planes parameters of the best double-couple focal mechanisms are:strike 292°, dip 62° and rake 80° for nodal plane I, and strike 132°, dip 30° and rake 108° for nodal plane Ⅱ, indicating that the main shock is of thrust faulting. The dip of nodal planeⅠis consistent with the dip of the depth profile, which is inferred to be the fault plane of seismogenic fault of this earthquake. According to the comprehensive analysis of the relocation results, the focal mechanism and geological structure in the source region, it is preliminarily inferred that the seismogenic structure of the Hutubi MS6.2 earthquake may be a backthrust on the deeper concealed thrust slope at the south of Qigu anticline. The earthquake is a "folding" earthquake taking place under the stress field of Tianshan expanding towards the Junggar Basin. 相似文献
14.
The new inversion algorithm developed based on the recent progress in the nonlinear programming study by us is used to invert
the earthquake source process of Chi Chi earthquake M
w7.6, 20 Semptember, 1999, Taiwan. A curve fault model is constructed in our inversion to make the fault model close to the
real rupturing fault to reduce the influence from the discrepancy between the constructed fault model and the real rupturing
fault. The results show that (1) the rupture process of the Chi Chi earthquake source lasted about 32 seconds and the main
faulting occurred between 6th to 21st second after the start of the ruptures and the high slip area were mainly located at
the northern segment of the fault. (2) The slip was dominated by thrust faulting. The average rake angle was 64.5°, which
was very consistent with those inverted by USGS, Harvard and CWB (Central Weather Bureau of Taiwan). The amount of the moment
inverted in this paper was 7.76×1020 NM, which was a slightly bigger than those inverted by USGS and Harvard. (3) A clear nucleation step existed in the source
faulting process and it lasted about 6 seconds. The moment release rate accelerated obviously at the end of the nucleation
step. The faulting started from the southern segment and mainly occurred at the northern segment after 10 seconds. At the
end of this paper, we analyzed the reliability of the inversion result via comparing with the GPS observations and discussed
its scientific signification. 相似文献
15.
16.
According to the Region-Time-Length (RTL) algorithm,the analysis of seismicity changes prior to the 2014 Yunnan Jinggu MS6.6 earthquake was conducted by using the earthquake catalogues about 6 and 15 years before this earthquake,respectively.When the studied period was nearly 6 years,an enhancement of seismic activity was detected around the epicenter since the beginning of 2013.The anomalies mainly distributed in the region of 22.5°~24.5°N and 99°~102°E.The range and degree of anomalies changed from small to large,and then to small chronologically.As the surface integral in respect to RTL,the physical parameter IRTL,which could reflect the regional seismicity level,began to increase since August 2013,and then reduced after reaching the peak point.The time length from the peak point of IRTL curve to the earthquake occurrence was 9 months.When the analyzed catalogue was nearly 15 years,the 2007 Ninger MS6.4 occurred in the studied region.Seismicity quiescence was detected prior to the Ninger MS6.4.Before the Jinggu MS6.6,seismicity quiescence was detected firstly,and then enhanced activity was observed 1 year prior to the earthquake occurrence.The anomalies mainly distributed in the region of 22.5°~24.5°N and 99°~102°E.The time length from the peak point of IRTL curve to the earthquake occurrence was 7 months.The above study showed that even the earthquakes location was near and the magnitude was close to each other,a big difference in seismic activity before the earthquakes may exist.Before the Jinggu MS6.6,there was some difference in seismicity changes according to different beginning time of catalogues,but the distribution of anomalies and the time length from the peak point of IRTL to the earthquake occurrence were uniform.So there was an important significance for exploring the relationship between the distribution of anomalies and the earthquake location,and the relationship between the time of the peak point of IRTL and the earthquake occurrence time. 相似文献
17.
1974年5月11日,在云南省昭通地区发生了7.1级地震。震中区位于金沙江下游南岸的山地中。 本文中,作者分析了震区大地测量资料,根据破裂与应变的关系,确立这次地震震源破裂属于逆冲型。依据烈度衰减和余震分布特征建立了矩形滑动断层模式参数,并应用曼辛哈（Mansinha）和斯迈利（smylie）给出的倾斜、有限滑动断层位移场的精确解析表达式,求得平均倾向滑距。结果是:断层走向N6°W,倾向N84°E,倾角60°,断面长20公里,宽30公里;断面顶部距地表深度2.5公里;平均倾向滑距2.8米,地震矩5.4×1026达因·厘米;应力降51巴;释放的应变能下限1.2×1023尔格。 作者还扼要地讨论了P波节面解和这次地震发生的构造条件,并解释了一些宏观地震现象。 相似文献
18.
The new inversion algorithm developed based on the recent progress in the nonlinear programming study by us is used to invert the earthquake source process of Chi Chi earthquake Mw7.6, 20 Semptember,1999, Taiwan. A curve fault model is constructed in our inversion to make the fault model close to the real rupturing fault to reduce the influence from the discrepancy between the constructed fault model and the real rupturing fault. The results show that (1) the rupture process of the Chi Chi earthquake source lasted about 32 seconds and the main faulting occurred between 6th to 21st second after the start of the ruptures and the high slip area were mainly located at the northern segment of the fault. (2) The slip was dominated by thrust faulting. The average rake angle was 64.5°, which was very consistent with those inverted by USGS, Harvard and CWB (Central Weather Bureau of Taiwan). The amount of the moment inverted in this paper was 7.76×1020 NM, which was a slightly bigger than those inverted by USGS and Harvard. (3) A clear nucleation step existed in the source faulting process and it lasted about 6 seconds. The moment release rate accelerated obviously at the end of the nucleation step. The faulting started from the southern segment and mainly occurred at the northern segment after 10 seconds. At the end of this paper, we analyzed the reliability of the inversion result via comparing with the GPS observations and discussed its scientific signification. 相似文献
19.
台湾海峡7.3级地震序列特征 总被引：1，自引：0，他引：1
根据粤闽台网和汕头地震遥测台网资料，讨论了１９９４年９月１６日台湾海峡南部７．３级地震的序列特征及震源机制等问题，分析认为，此次地震为大陆地壳下部破裂的产物，与北东向断裂活动有关。 相似文献