共查询到20条相似文献，搜索用时 15 毫秒
1.
Rock-physics models are constructed for hydrate-bearing sediments in the Qilian Mountains permafrost region using the K–T equation model, and modes I and II of the effective medium model. The K–T equation models the seismic wave propagation in a twophase medium to determine the elastic moduli of the composite medium. In the effective medium model, mode I, the hydrate is a component of the pore inclusions in mode I and in mode II it is a component of the matrix. First, the P-wave velocity, S-wave velocity, density, bulk modulus, and shear modulus of the sediment matrix are extracted from logging data.. Second, based on the physical properties of the main components of the sediments, rockphysics model is established using the K–T equation, and two additional rock-physics models are established assuming different hydrate-filling modes for the effective medium. The model and actual velocity data for the hydrate-bearing sediments are compared and it is found that the rock-physics model for the hydrate-filling mode II well reproduces the actual data. 相似文献
2.
随着水合物含量的增加,往往会引起纵、横波速度的增加,同时也会引起衰减的变化.针对含水合物沉积层的速度频散与衰减特征分析,有助于水合物含量的估计.本文以有效介质理论模型(EMT)为基础,研究了海洋未固结含水合物沉积层的纵、横波速度的非线性变化趋势.同时采用BISQ模型替代有效介质模型中的Gassmann方程,具体分析了全频带范围内海洋含水合物沉积层的速度频散与衰减特征.采用该模型,速度与衰减均随着水合物含量的增加而增加,且岩石孔隙度与泥质含量对衰减系数的影响较小.针对大洋钻探计划(ODP)164航次的实际数据,运用该模型方程计算采用声波测井数据(20kHz)与VSP数据(100Hz),分别获取了水合物稳定带的饱和度数据,平均在5%~7%之间,由于速度频散的影响,VSP估算结果要弱低于声波测井估算数据,均与实测保压取芯的甲烷含量数据、他人研究成果以及神经网络趋势预测结果均有着较好的一致性.对南海神狐海域三口钻位开展了水合物含量预测,与保压取芯结果有着较好的吻合关系.同时基于层剥离法提取该区域某地震测线BSR层的等效Q值,采用本文方法估算了该区域的等效天然气水合物含量15%~30%.数值模拟与实际应用结果表明:含水合物沉积层的速度频散与衰减特征均随着水合物含量的变化而变化,联合利用这一些变化特征,有助于天然气水合物含量的估计. 相似文献
3.
孔隙可压缩性与水合物储层物性相关.由于海域天然气水合物埋藏较浅,沉积物尚未成岩,海底水合物储层处于固结和完全未固结之间的状态,通过岩石物理推导证明,这两种状态下体积模量之差仅与孔隙可压缩性相关,因此孔隙可压缩性反应了岩石颗粒从悬浮态到正常压实的成岩进程,它可能与储层束缚水饱和度及渗透率密切相关.本文利用多口典型井数据分析了孔隙可压缩性与渗透率的关系,结果表明在海底浅层沉积物中渗透率越高,孔隙可压缩性越小,孔隙可压缩性对高渗储层的判识能力明显强于其他参数.然后,本文建立了两种状态下叠前地震反射特征的差异与岩石孔隙可压缩性的联系,提出双状态叠前反演方法,综合利用叠前地震数据以及测井资料反演得到了岩石孔隙可压缩性.实际应用效果表明,孔隙可压缩性较好的预测了高渗透率地层,气烟囱、粗粒的高含砂层等含气流体疏导通道渗透率较高,同时为水合物形成提供有利条件. 相似文献
4.
南海神狐海域地层渗透率与含水合物饱和度关系研究(英文) 总被引：2，自引：1，他引：1
本文利用取自南海神狐海域钻井岩芯进行了核磁共振测量,研究了岩石中所含水合物对地层渗透率的影响,该岩芯样品为一"孔隙充填型"水合物样品。核磁共振测量结果表明岩石中所含水合物对地层渗透率影响很大,随着含水合物饱和度的增加,地层渗透率迅速降低。通过对测量结果的进一步分析可知"孔隙充填型"水合物对地层渗透率的影响-存在多方面的因素,包括水合物对地层孔隙度、孔隙迂曲度的影响以及对水合物对孔隙喉道的堵塞等。最后本文利用Masuda下降模型建立了适用于南海神狐海域的相对渗透率与含水合物饱和度的经验公式,下降指数N=7.9718。 相似文献
5.
根据Ecker的水合物沉积物的三种微观模式,计算含水合物沉积层和含游离气沉积物的弹性模量,分析对比了水合物的不同微观模式、不同水合物饱和度以及不同游离气饱和度对沉积物弹性模量的影响;从纵横波分离的弹性波动方程出发,采用交错网格空间有限差分方法模拟地震波在海底天然气水合物沉积地层的传播,得到纵、横波的海底地震（OBS）共接收点道集。数值算例表明,当水合物作为流体的一部分或胶结颗粒骨架时,仅纵波记录上存在BSR;当水合物胶结颗粒接触,纵、横波记录上均存在BSR。并且,OBS会接收到上行纵波和上行横波在海底界面形成的转换波,干扰横波记录上BSR的识别。 相似文献
6.
The bottom simulating reflector （BSR） in gas hydrate-bearing sediments is a physical interface which is composed of solid, gas, and liquid and is influenced by temperature and pressure. Deep sea floor sediment is a porous, unconsolidated, fluid saturated media. Therefore, the reflection and transmission coefficients computed by the Zoeppritz equation based on elastic media do not match reality. In this paper, a two-phase media model is applied to study the reflection and transmission at the bottom simulating reflector in order to find an accurate wave propagation energy distribution and the relationship between reflection and transmission and fluid saturation on the BSR. The numerical experiments show that the type I compressional （fast） and shear waves are not sensitive to frequency variation and the velocities change slowly over the whole frequency range. However, type II compressional （slow） waves are more sensitive to frequency variation and the velocities change over a large range. We find that reflection and transmission coefficients change with the amount of hydrate and free gas. Frequency, pore fluid saturation, and incident angle have different impacts on the reflection and transmission coefficients. We can use these characteristics to estimate gas hydrate saturation or detect lithological variations in the gas hydrate-bearing sediments. 相似文献
7.
以三维高分辨地震与海底高频地震仪（OBS）联合勘探数据为基础,获得海底之下沉积层的地震反射成像剖面及多波信息,并以此确定研究区含天然气水合物沉积层的纵、横波速度的变化特征.根据走时反演获得的横波速度与纵波速度对比分析发现,研究区海底之下500 m深度范围内的某些沉积层具有较高的纵横波速度,这一纵波速度升高区域与水合物稳定带对应,而纵波速度下降并且横波速度变化较小的区域,可能与游离气的存在相关.游离气的可能存在与基于这一区域2007年钻探测井结果的普遍认识不完全相符. 相似文献
8.
沿裂隙发育的天然气水合物是印度深水盆地细粒沉积物中水合物的重要产出方式,水合物以结核状或脉状充填在高角度裂隙中.天然气水合物主要沿着构造主应力方向生成,由于裂隙的存在,含水合物的沉积物层呈现各向异性.利用孔隙介质中水合物呈均匀分布的速度模型计算的NGHP01-10D井水合物饱和度高达40%,而压力取芯表明水合物饱和度占孔隙空间的20%左右.为了研究水合物饱和度差异,基于层状介质的各向异性模型计算了裂隙充填型水合物的饱和度.在垂直井孔中,由于波入射角与裂隙倾角有关,考虑裂隙倾角变化,利用纵波和横波速度同时反演水合物饱和度和裂隙倾角.利用层状介质模型计算的水合物占孔隙空间的15%～25%,裂隙的倾角在60°～90°,多为高角度裂隙.在NGHP01-10D井中,纵横波速度联合计算的饱和度与压力取芯结果吻合更好. 相似文献
9.
南海北部神狐海域GMGS-1钻探揭示SH3井天然气水合物位于稳定带上部,厚度约为10 m.氯离子异常计算的水合物饱和度最高达26%,高水合物饱和度层出现高电阻率和低纵波速度.为分析该低纵波速度异常,本文基于简化的三相介质理论计算了饱和水纵波速度,在深度195 m附近,测量的纵波速度小于饱和水纵波速度.利用阿尔奇公式,基于原位温度、盐度、密度孔隙度和测量的电阻率,利用交会分析确定了该井的阿尔奇常数为a=1.1和m=2.3.基于该参数,利用阿尔奇方程计算的水合物饱和度占孔隙空间5%~20%,局部地层水合物饱和度达26.8%,在垂向上分布不均匀.由于钻探可能导致水合物发生分解而产生游离气,原位游离气和水合物分解产生的气体都能造成低纵波速度异常.由于地震资料采集在测井之前完成,利用不同速度制作合成地震记录并与地震资料进行对比,能够确定水合物稳定带上部的低速异常形成原因. 相似文献
10.
已有的地质与地球物理信息表明南中国海北部陆坡神狐海域存在天然气水合物,2007年钻井和取样结果证实其以细颗粒均匀存在于水合物稳定带内,但区域分布范围极不规则.由于测井记录长度和取样深度的范围有限,天然气水合物垂向分布特征难以确定.为了深入了解此区域天然气水合物深度上的分布规律,对SH7井的多种测井数据进行综合分析并与地震反射特征建立联系,得到三个主要的沉积物性变化层位并以此为基础进行叠后数据的伪井约束反演,结果表明在已证实的含水合物层之下还存在高速层.而AVO叠前正演模拟分析结果与实际地震数据对比表明,研究区的天然气水合物稳定带可能由含水合物沉积物与饱水沉积物的薄互层组成,这就意味着在取样获得天然气水合物样品的深度之下,很可能存在另一个含水合物层. 相似文献
11.
《中国科学:地球科学(英文版)》2021,(5)
Seismic properties of hydrate-bearing reservoirs that are affected significantly by the hydrate distribution are key for quantitative assessment of the reservoir. The knowledge of hydrate distribution in fractured reservoirs remains poorly understood. To obtain such knowledge, we measured and analyzed five anisotropic velocities needed to fully characterize the seismic anisotropy in an artificial sandstone with aligned fractures during hydrate formation associated with varying distribution. We showed that while the formation of hydrate improved the velocities, the improvement was more significant for hydrate saturation above 10%. We also showed that the increasing trends varied among the anisotropic velocities when hydrate saturation was above 10%. Specifically, the compressional wave velocity travelling vertical to the bedding plane and the shear wave velocity with polarization perpendicular to the bedding plane increased more rapidly than the other compressional and shear wave velocities, respectively. Interpretation of the anisotropic seismic results suggested that the hydrate tends to bind to the grains in the fractures at low hydrate saturation, and becomes to bridge the fracture surfaces when the hydrate saturation exceeds 10%. The results have provided new insights into the hydrate distribution and its resulting anisotropic seismic properties in fractured reservoirs. This will pave the way for the successful assessment of hydrate in fractured reservoirs. 相似文献
12.
本文以墨西哥湾水合物区域为背景,利用数值模拟方法研究了过平衡钻井条件下,当钻井液温度高于地层中水合物稳定温度时,水基钻井液侵入海洋含水合物地层的动态过程及其一般性规律.与侵入常规油气地层相比,耦合水合物分解和再形成是钻井液侵入海洋含水合物地层的主要特征.模拟结果表明,钻井液密度、温度和盐度都对侵入过程有影响.在一定条件下,钻井液密度越大,温度和含盐量越高,则钻井液侵入程度越深,热量传递越远,水合物分解程度越大.分解的水气在合适条件下又会重新形成水合物,影响了钻井液进一步侵入.而重新形成的水合物的饱和度甚至可能高于原位水合物饱和度,在井周形成一个"高饱水合物"环带.这一现象归因于钻井液侵入的驱替推挤、水合物分解的吸热以及地层传热的滞后等因素共同作用.在地层物性一定的条件下,高饱水合物环带的出现与否主要受钻井液温度和盐度控制.水合物分解以及高饱水合物环带的出现对井壁稳定和电阻率测井解释有很大影响.因此,为维护井壁稳定、确保测井准确和减少水合物储层伤害,就必须对钻井液密度、温度和滤失量进行严格控制,防止地层中的水合物大量分解.最好采用控制压力钻井(MPD)和深侧向测井方式,同时尽量选用低矿化度的含水合物动力学抑制剂的钻井液体系,采取低温快速循环方式. 相似文献
13.
The shear-wave velocity is a very important parameter in oil and gas seismic exploration, and vital in prestack elastic-parameters inversion and seismic attribute analysis. However, shearing-velocity logging is seldom carried out because it is expensive. This paper presents a simple method for predicting S-wave velocity which covers the basic factors that influence seismic wave propagation velocity in rocks. The elastic modulus of a rock is expressed here as a weighted arithmetic average between Voigt and Reuss bounds, where the weighting factor, w, is a measurement of the geometric details of the pore space and mineral grains. The S-wave velocity can be estimated from w, which is derived from the P-wave modulus. The method is applied to process well-logging data for a carbonate reservoir in Sichuan Basin, and shows the predicted S-wave velocities agree well with the measured S-wave velocities. 相似文献
14.
随着石油勘探工业的持续发展和技术水平的日益提高,低孔低渗油气藏已成为我国油气勘探开发的重要领域之一,但是该类油气藏的储层岩石物理关系复杂,对其评价也相对较难。本文针对中深层气藏低孔低渗储层评价存在的困难,采用修正的White气体包裹体模型开展岩石物理研究。首先对气体包裹体模型进行分析,得到纵横波速度的计算公式,进而理论计算并分析纵横波速度与孔隙度、饱和度、压力及温度参数的变化关系,最后结合岩心实验对理论计算结果进行了验证。研究结果表明基于气体包裹体模型的理论计算结果与实测数据吻合较好,可以较好地为低孔低渗复杂储层声波速度测量及解释提供技术支持。 相似文献
15.
Improved estimates of the amount of subsurface gas hydrates are needed for natural resource, geohazard, and climate impact assessments. To evaluate gas hydrate saturation from seismic methods, the properties of pure gas hydrates need to be known. Whereas the properties of sediments, specifically sands, and hydrate‐bearing sediments are well studied, the properties of pure hydrates are largely unknown. Hence, we present laboratory ultrasonic P‐wave velocity and attenuation measurements on pure tetrahydrofuran hydrates as they form with reducing temperatures from 25°C to 1°C under atmospheric pressure conditions. Tetrahydrofuran hydrates, with structure II symmetry, are considered as proxies for the structure I methane hydrates because both have similar effects on elastic properties of hydrate‐bearing sediments. We find that although velocity increased, the waveform frequency content and amplitude decreased after the hydrate formation reaction was complete, indicating an increase in P‐wave attenuation after hydrate formation. When the tetrahydrofuran hydrate was cooled below the freezing point of water, velocity and quality factor increased. Nuclear Magnetic Resonance results indicate the presence of water in the “pure hydrate” samples above the water freezing point, but none below. The presence of liquid water between hydrate grains most likely causes heightened attenuation in tetrahydrofuran hydrates above the freezing point of water. In naturally occurring hydrates, a similarly high attenuation might relate to the presence of water. 相似文献
16.
17.
致密砂岩气藏具有裂缝发育和有效应力高的特征,研究不同有效压力下孔、裂隙介质地震波传播特征,有利于地震解释与地下储层的识别.但是前人的研究较少考虑岩石内部微观孔隙结构特征与孔隙、裂隙间流体流动的关系.本文首先通过选取四川盆地典型致密砂岩岩样,在不同有效压力下对岩石样本进行超声波实验测量.然后基于实验测得的纵、横波速度进行裂隙参数反演,得到不同有效压力下致密砂岩样本的裂隙孔隙度.再将裂隙孔隙度和样本岩石物理参数代入双重孔隙介质模型,模拟得到不同有效压力下饱水致密砂岩样本纵横波速度频散和衰减的变化规律.结果表明模型预测的速度频散曲线与纵波速度实验测量结果能够较好的吻合.最后统计分析了致密砂岩裂隙参数,得到了致密砂岩储层裂隙参数随有效压力及孔隙度变化特征.依据实际岩石物理参数建立模型,其裂隙参数三维拟合结果能够较好描述致密砂岩裂隙结构与孔隙度、应力的关联,可为实际地震勘探中预测储层裂缝性质提供基础依据. 相似文献
18.
Amplitude versus offset concepts can be used to generate weighted stacking schemes (here called geo-stack) which can be used in an otherwise standard seismic data processing sequence to display information about rock properties. The Zoeppritz equations can be simplified and several different approximations appear in the literature. They describe the variation of P-wave reflection coefficients with the angle of incidence of a P-wave as a function of the P-wave velocities, the S-wave velocities and the densities above and below an interface. Using a smooth, representative interval velocity model (from boreholes or velocity analyses) and assuming no dip, the angle of incidence can be found as a function of time and offset by iterative ray tracing. In particular, the angle of incidence can be computed for each sample in a normal moveout corrected CMP gather. The approximated Zoeppritz equation can then be fitted to the amplitudes of all the traces at each time sample of the gather, and certain rock properties can be estimated. The estimation of the rock properties is achieved by the application of time- and offset-variant weights to the data samples before stacking. The properties which can be displayed by geo-stack are: P-wave reflectivity (or true zero-offset reflectivity), S-wave reflectivity, and the reflectivity of P-wave velocity divided by S-wave velocity (or ‘pseudo-Poisson's ratio reflectivity’). If assumptions are made about the relation between P-wave velocity and S-wave velocity for water-bearing clastic silicate rocks, then it is possible to create a display which highlights the presence of gas. 相似文献
19.
《中国科学D辑(英文版)》2008,(Z2)
Study on characterizing reservoir parameters dynamic variations by time-lapse seismic attributes is the theoretical basis for effectively distinguishing reservoir parameters variations and conducting time-lapse seismic interpretation,and it is also a key step for time-lapse seismic application in real oil fields. Based on the rock physical model of unconsolidated sandstone,the different effects of oil saturation and effective pressure variations on seismic P-wave and S-wave velocities are calculated and analyzed. Using numerical simulation on decoupled wave equations,the responses of seismic amplitude with different offsets to reservoir oil saturation variations are analyzed,pre-stack time-lapse seismic attributes differences for oil saturation and effective pressure variations of P-P wave and P-S converted wave are calculated,and time-lapse seismic AVO (Amplitude Versus Offset) response rules of P-P wave and P-S converted wave to effective pressure and oil saturation variations are compared. The theoretical modeling study shows that it is feasible to distinguish different reservoir parameters dynamic variations by pre-stack time-lapse seismic information,including pre-stack time-lapse seismic attributes and AVO information,which has great potential in improving time-lapse seismic interpreta-tion precision. It also shows that the time-lapse seismic response mechanism study on objective oil fields is especially important in establishing effective time-lapse seismic data process and interpreta-tion scheme. 相似文献
20.
Ultrasonic elastic characteristics of five kinds of metamorphic deformed coals under room temperature and pressure conditions 总被引：3，自引：0，他引：3
The calibration of the elastic characteristics of deformed coals is essential for seismic inversion of such units, because the prediction of coal deformation is essential for both mining safety and methane production. Therefore, many samples of broken and mylonitic deformed coal were tested with ultrasonic waves in the laboratory. These samples came from four mining areas: the Huainan, Pingdingshan, Hebi and Jiaozuo coal mines, which present five different metamorphic ranks shown as cylinders striking across circular limits of steel. Under normal pressures and temperatures, ultrasonic P- and S-wave tests show that the velocities, quality factors, and elastic moduli of the deformed coals were greatly reduced compared with undeformed coals. Also, some correlation was found between the P- and S-wave velocities in the deformed coals. However, there is no evidence of linear correlations between velocity and density, velocity and quality factor, or the quality factors of P- and S-waves. Compared with the elastic characteristics of undeformed coals, such as P- and S-wave velocity ratios or Poisson’s ratio, those of deformed coals generally decrease and the P-wave quality factors are less than those of S-waves. Moreover, the analysis of the relationship between pore structure and elastic modulus shows a better correlation between the P- and S-wave velocities and effective porosity, pore volume and specific surface area. Also, there are similar relationships between the pore structure and the Young’s and shear moduli. However, there are no such correlations with other moduli. Correlations between these elastic moduli, pore structure, coal rank and density were not found for the various samples of deformed coals, which is consistent with only structural destruction occurring in the deformed coals with other physical properties remaining unchanged. The experimental results show that it is possible to predict the deformation of coals with multi-component seismic elastic inversion. 相似文献