共查询到20条相似文献，搜索用时 331 毫秒
1.
A comparative study using quartz optically stimulated luminescence (OSL) and feldspar post-infrared infrared stimulated luminescence (post-IR IRSL) was undertaken on Quaternary fluvial sediments from an unnamed tributary of the Moopetsi River in South Africa. The aim is to assess whether the post-IR IRSL signal can be used to date incompletely bleached sediments. Several post-IR IRSL signals using varying stimulation and preheat temperatures were investigated; of these the post-IR IRSL225 signal was deemed most appropriate for dating because it bleached most rapidly. The feldspar post-IR IRSL225 equivalent dose (De) values from this site are consistently larger than those from quartz OSL, probably due to differences in the bleaching characteristics of the two signals. Additionally, the post-IR IRSL225 De values within a sample showed less variation in precision than the quartz De data, possibly due to greater averaging between grains in the feldspar small aliquots. The agreement between ages based on the OSL and post-IR IRSL225 signals was better for younger samples (<20 ka) than for older ones (>50 ka); the cause of this variation is unclear. 相似文献
2.
Raised beach sand deposits along the southeastern coast of Norway were dated by optical (OSL) and infrared stimulated luminescence (IRSL) and the quartz and K-feldspar luminescence characteristics were described. Due to the poor quartz luminescence characteristics, only a limited number of samples were suitable for OSL dating. More promising are the K-feldspar extracts, with typical K-feldspar luminescence characteristics and no sign of fading. For equivalent dose (De) determination, sand-size quartz and feldspar extracts were used, applying a single aliquot regenerative (SAR) protocol. Both, OSL and IRSL De estimates show a wide distribution, unexpected for beach deposits. The calculated OSL and IRSL age estimates were generally in good agreement and the correctness of the ages was confirmed by independent age control. Because only a limited number of the quartz samples were suitable for OSL dating, IRSL dating of the K-feldspar represents an alternative to OSL quartz dating. 相似文献
3.
The infrared (IR) stimulated luminescence (IRSL) and post-IR IRSL (pIRIR) signals from K-feldspar can, for convenience, be divided into two components, bleachable and ‘non-bleachable’, where the latter corresponds to the ‘residual’ signal observed in sunlight-bleached samples. In this paper, we examine the non-bleachable component of IRSL of K-feldspar for several sedimentary samples from across Eurasia. We observed a large variability in the residual doses among these samples after prolonged exposure to sunlight. By employing multiple elevated temperature (MET) IR stimulations at 50–300 °C, we show that the residual dose increases systematically with stimulation temperature, attaining values as high as ∼50 Gy at 300 °C, even after several hours to tens of hours of exposure to unfiltered sunlight. We examined two samples in detail and found that the bleachable and non-bleachable components produced different dose response curves. Pulse annealing studies showed that the non-bleachable component is more stable than the bleachable component, suggesting that a preheat procedure cannot eliminate the non-bleachable component. Additional experiments revealed that the non-bleachable component is dose dependent. Owing to this dose dependency, we demonstrate mathematically and empirically that the simple subtraction of a residual dose from the measured equivalent dose (De) – which is the most common approach employed (if any residual dose is subtracted at all) – will result in underestimation of the actual De. We present a method to correct for the dose dependency of the residual dose, which can improve the accuracy of either MET-pIRIR or pIRIR age estimates for samples in which the non-bleachable component represents a significant fraction of the measured signals. 相似文献
4.
Cobbles can be used as an alternative to the conventionally employed sand-sized mineral luminescence dating. In piedmont environments, cobbles are much more abundant than sand-sized material. The IRSL50 signal has been widely used in previous studies due to its greater sensitivity to exposure events. However, it is well known that the low temperature IRSL signal is more prone to fade than elevated temperature post-IR IRSL signal. In this study, to test the reliability and applicability of cobble sub-surface elevated temperature IRSL luminescence dating, six light-color granite cobbles and two sand-sized samples from silty sand lens were collected from a high terrace of Manas River on the northern piedmont of Chinese Tian Shan. A modified multi-elevated-temperature post-infrared infrared stimulated luminescence (MET-post-IR IRSL) protocol was applied. The age-temperature (A-T) plateau of MET-post-IR IRSL measurement was combined with the conventional age-depth (A-D) plateau in luminescence-depth profile to evaluate the resetting and fading of MET-post-IR IRSL signals. Uncertainties of grain-sizes of K-feldspar within solidified slices were also explored by μ-XRF mapping of potassium content. The A-T plateau was identified between MET-post-IR IRSL170 and MET-post-IR IRSL225 signals of one cobble, which suggested completeness of bleaching before burial and negligible anomalous fading during burial. This cobble yielded MET-post-IR IRSL225 ages of 15.8 ± 2.6 ka and 19.0 ± 3.2 ka for top and bottom side, respectively. These MET-post-IR IRSL225 ages were consistent with independent coarse-grained quartz MAM OSL ages (15.7 ± 3.6 ka and 14.8 ± 2.6 ka) of two sand-sized samples. The MET-post-IR IRSL225 age of 16.0 ± 1.2 ka for the bottom side of another cobble was also consistent with the independent age, even without the A-T plateau. It was inferred to be caused by anomalous fading of MET-post-IR IRSL signals other than that stimulated at 225 °C by refering to the A-D plateau observed. Our results show that MET-post-IR IRSL measurement can be employed to determine the burial ages of cobbles. The A-T plateau, complemented with the A-D plateau, could be used to assess the reliability of burial ages of cobble luminescence dating from the view of bleaching and fading. 相似文献
5.
We report an investigation of the effect of different single grain OSL behaviours on multiple-grain (single aliquot) De estimates. This was done by creating ‘synthetic aliquots’ in which signals are summed from collections of individual grains. The samples used were taken from aeolian linear dune sediments, from sites located in the Kalahari. We note this is a type of sample for which single multiple-grain aliquots are routinely used for dating. Several grain behavioural types were identified in our samples but the only grain type that systematically affected multiple-grain De estimates was the ‘over-saturating’ type (the case where the natural signal (Ln/Tn) is significantly greater than the regenerated Lx/Tx signal at saturation), the presence of which lead to higher estimates of De. The magnitude of this effect is controlled by the contribution of ‘over-saturating’ grains to the total light sum of the multiple-grain aliquot and the maximum increase observed in this study was ∼15 Gy. Of the four samples investigated here, inter-aliquot variations in the signal contribution of ‘over-saturating’ grains led to a significant increase in dispersion in just one of the samples. More generally, the presence/absence of these grains is considered to be a likely source of significant ‘intrinsic’ scatter in single aliquot dating and likely to broaden multiple-grain De distributions. We suggest all samples are screened for this behaviour before single aliquot dating is attempted. 相似文献
6.
IR laser stimulated luminescence was used to determine the equivalent dose (De) for about 150 luminescent K-feldspar grains of two well-bleached aeolian sand samples, previously dated using quartz optically stimulated luminescence (OSL) and thermally-transferred OSL (TT-OSL). Fading tests were performed both on the entire single grain disc, using stimulation by IR LEDs, and on each grain individually, by stimulation with an IR laser. The single grain De distributions are highly over dispersed, even after applying rejection criteria, such as recycling ratio and recuperation. Fading rates determined with the IR LED stimulation do not represent the fading behavior of the IR laser stimulated signal and are therefore considered inappropriate for the fading correction of single grain De values. Fading rates of individual grains exhibit a wide range of values (0%–10% per decade) and plotting the single grain fading rates against the single grain De values reveals a negative relationship. Different approaches were taken to correct for fading, but the resulting ages tend to underestimate the reference ages. 相似文献
7.
Testing the accuracy of OSL and pIR IRSL dating of young geoarchaeological sediments in coastal Peru
Luminescence dating of late Quaternary sediments in Peru is challenging, especially on the Peruvian coast. Earlier studies have shown that quartz grains often exhibit a thermally unstable, medium signal that caused the underestimation of Optically Stimulated Luminescence (OSL) ages. InfraRed Stimulated Luminescence (IRSL) dating has shown to produce more reliable ages, depending, amongst other factors, on the age model (Central or Minimum Age Model), and the IRSL signal. IRSL dating of geoarchaeological sediments has, however, hardly been carried out, let along validated, against an independent age dataset. This dating approach is, nonetheless, the only promising way to date the geological substrate in which many of Peru's archaeological sites are buried. Peru contains some of the oldest and most important archaeological heritage sites, yet not much is known of the environmental context in which many of its early civilizations prospered. A better understanding of which luminescence method works best could therefore help in a better understanding of the geological-stratigraphical context of many of Peru's sites.To investigate this matter more fully, we compared the luminescence dating results of seven sediment samples from the top layer of the Lima alluvial fan and from geoarchaeological layers of the Maranga Complex (San Miguel, Lima), with an independent dataset of sixteen 14C ages. Our results showed that the quartz OSL ages always underestimated the expected ages due to a signal dominated by medium and slow components, and that the post-IR IRSL225 (pIR IRSL225) and IRSL50 ages of K-feldspars, on basis of the Central Age Model (CAM), always overestimated the expected ages. The Minimum Age Model (MAM) on the other hand, correctly predicted the expected ages for the early Holocene, Lima alluvial fan sediments using the pIR IRSL225 signal of K-feldspars, and the late Holocene, geoarchaeological ages using the IRSL50 signal. 相似文献
8.
Studies of modern sediments, their sedimentology and depositional processes are important for understanding the behaviour of the luminescence characteristics of quartz and feldspar in fluvial settings. Previous studies have shown large variations in OSL characteristics of quartz from different fluvial systems, while the IRSL and pIRIR signals from K-feldspar have been understudied. We test the effects of fluvial setting on luminescence characteristics by collecting modern (<1 year old) bedload sediments down the courses of three river systems with very different hydrological characteristics, geologic contexts, and catchment lithologies. The single grain (SG) and multi-grain aliquot (MGA) OSL (quartz) and IRSL and pIRIR (K-feldspar) properties of samples were measured and compared to better understand intra- and inter-fluvial system patterns in sensitivity, bleaching, and equivalent dose (De) distribution skewness and kurtosis. The quartz OSL and K-feldspar IRSL and pIRIR signal sensitivities increase with downstream transport distance of sediments, confirming previous studies (quartz) and showing that IRSL signals from K-feldspar also increase in response to reworking cycles. Increasing transport distance also results in better bleaching of the OSL signal from quartz samples (MGA and SG) due to more grains being exposed to sunlight. By contrast, the IRSL and pIRIR signals retain significant residuals in all samples, though 5–15% of grains yield zero-dose De values and age modelling of SG data yields accurate burial dose estimates. Additionally, the skewness and kurtosis of SG OSL De datasets from one river increase with transport distance, with the best bleached samples exhibiting the highest skewness, thereby questioning the applicability of the skewness-value of a De dataset as an accurate indicator for partial-bleaching. Our data shows marked variability between (i) different river systems and (ii) the measured minerals, however consistent use of statistical models allows accurate De estimation in all contexts. Age modelling of SG data from K-feldspar, thus, provides a valuable tool for future fluvial research in regions where poor OSL characteristics prevent the use of quartz as a dosimeter. 相似文献
9.
10.
Luminescence dating has long been used for chronological constraints on marine sediments due to the ubiquitous dating materials (quartz and feldspar grains) and its applicability over a relatively long time range. However, one of the main difficulties in luminescence dating on marine sediments is partial bleaching, which causes age overestimations. Especially, partial bleaching is typically difficult to be detected in the fine grain fraction (FG) of marine sediments. The recently developed feldspar post-IR IRSL (pIRIR) protocol can detect non-fading signals and thus avoid feldspar signal instability. In the current study, fine grains were extracted from a gravity core in the northern Sea of Japan, and the aim is to test the feasibility of using different luminescence signals with various bleaching rates to explore the bleaching conditions of fine grain fraction in marine sediments. The results suggest that the quartz OSL signal and polymineral pIRIR signals at stimulation temperatures of 150 °C and 225 °C (pIRIR150 and pIRIR225) of FG were well bleached prior to deposition. The OSL ages were used to establish a chronology for this sedimentary core and the resulting age-depth relationship is self-consistent and comparable with radiocarbon dates. We conclude that different luminescence signals with various bleaching rates can be used to test the bleaching conditions of fine grain fraction in marine sediments; and the luminescence dating can be applied to marine sediments with great potential. 相似文献
11.
Luminescence dating of K-feldspar from sediments: A protocol without anomalous fading correction 总被引：3，自引：0，他引：3
A protocol for optical dating of potassium-rich feldspar (K-feldspar) is proposed. It utilizes the infrared stimulated luminescence (IRSL) signal measured by progressively increasing the stimulation temperature from 50 to 250 °C in step of 50 °C, so-called multi-elevated-temperature post-IR IRSL (MET-pIRIR) measurements. Negligible anomalous fading was observed for the MET-pIRIR signals obtained at 200 and 250 °C. This was supported by equivalent dose (De) measurements using the IRSL and MET-pIRIR signals. The De values increase progressively from 50 °C to 200 °C, but similar De values were obtained for the MET-pIRIR signal at 200 and 250 °C. Measurement of modern samples and bleached samples indicates that the MET-pIRIR signals have small residual doses less than 5 Gy equivalent to about 1–2 ka. We have tested the protocol using various sedimentary samples with different ages from different regions of China. The MET-pIR IRSL ages obtained at 200 and 250 °C are consistent with independent and/or quartz OSL ages. 相似文献
12.
Luminescence dating has been applied to scoria and lahar deposits from Somma–Vesuvius, Italy. Samples include scoria from the AD472 and 512 (or 536) eruptions and lahar deposits. In order to find a stable luminescence signal which is less affected by anomalous fading, infrared stimulated luminescence (IRSL) signals at elevated temperatures after bleaching with IR at 50 °C (termed post-IR IRSL; pIRIR) were tested at different preheat and elevated stimulation temperatures. The fading rates of both IRSL and pIRIR signals reduced dramatically with increasing preheat and pIRIR stimulation temperatures. A pIRIR signal measured at 290 °C after a preheat at 320 °C (60 s) and an IR stimulation at 50 °C (100 s) was selected to calculate the equivalent dose (De). The gamma spectrometry results indicate that the U-series nuclides are not in equilibrium and there is a large 226Ra excess. The dose rates and ages were calculated by assuming a 226Ra excess (over its parent 230Th) at deposition, and that this unsupported excess then decayed to the present level. The resulting luminescence ages of the two scoria samples agreed with the expected ages, and the ages of the lahar deposits indicate that they are associated with the AD1631 eruption. 相似文献
13.
The chronology of dust deposition and climate during the last interglacial is poorly known on the Chinese Loess Plateau. Here, 51 samples were taken from the ∼5 m S1 palaeosol (MIS5) at the desert marginal Jingbian site to develop what is currently the most detailed S1 chronology on the Plateau using instrumental dating techniques. We use the post-IR IRSL signal from sand-sized grains of K-rich feldspar. Signal resetting in the agricultural layer shows that it is possible to almost completely zero this signal in nature. First IR stimulation plateau measurements show that there is no clear dependence of De on first IR stimulation temperature between 50 and 260 °C suggesting negligible signal fading. Resultant ages are consistent with a last interglacial age (∼130 to ∼75 ka) and are also consistent within errors with continuous linear sedimentation rates. The average mass accumulation rate for S1 is ∼150 g m−2 a−1, considerably higher than at many other sites but within the overall range of Loess Plateau estimates. The remarkably stable sediment accumulation at the site contrasts with a more complex record of environmental and monsoonal change recorded in grain-size and magnetic susceptibility. 相似文献
14.
We investigated the infrared stimulated luminescence (IRSL) and post-infrared IRSL (pIRIR) signals emitted by K-feldspars from sedimentary samples from Asia, Europe and Africa using a single-aliquot multiple elevated temperature (MET) stimulation procedure. For separate aliquots of the same sample, we show that variation among the dose response curves (DRCs), or growth curves, constructed from the regenerative dose signal (Lx), the test dose signal (Tx, an indicator of luminescence sensitivity) and the sensitivity-corrected signal (Lx/Tx) can be largely eliminated by normalising the DRCs using one of the regenerative dose signals; we call this procedure ‘regenerative-dose normalisation’ or re-normalisation. Furthermore, for the MET-pIRIR signals measured at 250 °C, we find that different samples have re-normalised DRCs that follow the same growth function, despite the samples differing significantly in terms of their geological provenance, sedimentary context, equivalent dose (De) and luminescence sensitivity. This common feature offers the potential to establish a ‘global standardised growth curve’ (gSGC) for different samples of K-feldspar, and thereby enable De values to be estimated for a large number of single aliquots by projecting the re-normalised natural signals on to the gSGC. For the 18 samples investigated in this study, we find that De estimates obtained from the gSGC are consistent with those obtained using full single-aliquot regenerative dose (SAR) procedures for doses of up to ∼1600 Gy. The establishment of a gSGC would greatly reduce the time required to date older samples using K-feldspar, as regenerative doses of several hundreds to a few thousands of Gy are typically delivered to each aliquot in each SAR cycle. 相似文献
15.
The Wulanmulun site found in 2010 is an important Paleolithic site in Ordos (China), from which lots of stone and bone artifacts and mammalian fossils have been recovered. It was previously dated by radiocarbon and optically stimulated luminescence (OSL) techniques on quartz. To further confirm the reliability of the chronology constructed based on OSL ages and test the applicability of the recently developed pIRIR procedure on sediments from northern China, twenty-four sediment samples (including eolian, lacustrine and fluvio-eolian sands) from the site were determined using the multi-elevated-temperature post-IR IRSL (MET-pIRIR or pIRIR) procedure on potassium feldspar. The results show that the studied samples have two MET-pIRIR De preheat plateaus (280–320 and 340–360 °C), and the bleaching rates of the luminescence signals are associated with sample ages and stimulation temperatures. All the pIRIR ages (7–155 ka) corrected for anomalous fading and residual dose obtained after solar bleaching for 15 h are larger than the corresponding quartz OSL ages (4–66 ka) previously determined, even for the young eolian samples (<10 ka). But the corrected IRSL(50 °C) ages (6–85 ka) are broadly consistent with the quartz ages. It appears that the IRSL(50 °C) ages are more reliable, although this contradicts the previously results obtained by other people. On the other hand, we also obtained an extended age plateau between the stimulation temperatures of 50 and 290 °C in the plot of age versus stimulation temperature (A-T plot) by subtracting different residual doses obtained after different bleaching times. The reliability of the plateau ages requires further investigation. For the sediment samples from this site, quartz should be more suitable for dating than K-feldspar, and the quartz OSL ages of 50–65 ka for its cultural layer should be reliable. 相似文献
16.
In addition to dating, IRSL luminescence signals can preserve information about erosional, transport, and depositional histories of a population of grains. Knowledge of the degree of bleaching can be useful in understanding the processes that occurred during previous depositional events, as certain transport conditions result in a well bleached signal, while others result in grains retaining an inherited signal from prior events. This information can be accessed by making single-grain IRSL measurements across successively increasing temperatures, thereby isolating signals from traps of different bleachabilities.A new approach offers a way to evaluate the completeness of bleaching of a grain by testing patterns of equivalent dose (DE) values measured at three elevated temperatures (3ET), 50, 125, and 225 °C. Consistent DE estimates across two or more temperatures suggest a single bleaching event of sufficient duration to fully depopulate the traps involved. Incompletely bleached grains with inconsistent DE values across temperatures will lack a 3ET “plateau.” Modes in the distribution of DE values for fully bleached grains can suggest depositional ages, subject to assessment of fading. We developed a Python code in a Jupyter Notebook environment for data analysis and visualization to expedite processing the large data sets produced by the 3ET protocol.The 3ET protocol was tested on a radiocarbon dated sequence of playa samples from California, USA and on a set of fluvial terraces in the Marlborough region of New Zealand as part of a larger project to reconstruct regional seismic history. Where standard pIRIR apparent ages can be inconsistent or ambiguous, 3ET age estimates produce generally consistent apparent ages. Modes of 3ET plateaus can be used to infer the most recent and prior events that resulted in a sub-population of grains being fully bleached. These initial results suggest that the 3ET method can be useful to characterize both the age and degree of bleaching of depositional events. 相似文献
17.
In this study we test the potential of the elevated temperature infrared stimulated luminescence (IRSL) signals for dating Romanian loess. The recently developed post-IR IRSL protocol is applied to Romanian loess using polymineral fine grains extracted from the loess-palaeosol sequence at Mircea Vodă (SE Romania). This approach is aimed at obtaining an additional age control to examine the age discrepancy obtained from previous optically stimulated luminescence (OSL) studies using different grain-sizes of quartz (4–11 μm and 63–90 μm).Two preheat post-IR IR stimulation temperature combinations were used, 250–225 °C and 325–300 °C, respectively. The signals obtained are documented in terms of dose response curve, laboratory tests and fading. Although both post-IR IRSL signals exhibit small fading rates, dose response characteristics indicate that these rates may be laboratory artefacts. The post-IR IRSL signal stimulated at 300 °C is observed to suffer from dose dependent initial sensitivity changes as both natural and regenerated signals are observed to lie above the saturation level of the dose response curve. Uncorrected age results obtained using both post-IR IRSL signals are in general agreement with previously reported silt-sized quartz OSL ages for samples collected from the uppermost loess unit L1. For older material, the post-IR IRSL signal stimulated at 225 °C is considered to provide reliable age results, in agreement with independent age control available for this sequence. 相似文献
18.
RESIDUAL POST-IR IRSL SIGNALS OF POTASSIUM FELDSPAR FROM MODERN SAG POND DEPOSITS OF CENTRAL ALTYN TAGH FAULT: IMPLICATION FOR DATING YOUNG PALEOSEISMIC EVENTS 
下载免费PDF全文
下载免费PDF全文 The Altyn Tagh Fault(ATF)is one of the most prominent active strike-slip faults in the India-Eurasia collision. Fresh features of surface ruptures, which are attributed to seismic events taking place in the last millennium, are identified at several sites along the Che'erchen River to Qingshui River section on the central part of ATF. Accurate chronology of these earthquake events would help understand the spatial-temporal relationship of the recent earthquakes. However, great difficulties are encountered. The central ATF is located in the arid area, and the vegetation cover is so limited that rare organic materials appropriate for radiocarbon dating can be found in the sediments. Luminescence dating technique may serve as an alternative to directly determine the burial ages of the earthquake related sediments. The optically stimulated luminescence(OSL)signal of quartz, which has been widely employed for luminescence dating, displays unwanted charateristics for accurate dating. Firstly, the quartz OSL signal is not sensitive to irradiation, which leads to low signal-to-noise ratio or even no measurable quartz OSL signal. Secondly, the targeted samples of the last millennium are very young, and the radiation dose received during the burial is expected to be less than 3~4Gy, which futher deteriorates the signal-to-noise ratio of the quartz OSL signal. Therefore, quartz OSL signal is not appropriate for dating the sediments relevant to the recent earthquakes on ATF.
The infrared stimulated luminescence(IRSL)signal of potassium feldspar is an alternative, and it is in usual an order of maginitude more sensitive to raidation than the quartz OSL signal. The enhanced signal-to-noise ratio makes it applicable to young samples. The post-IR IRSL signal has been successfully applied to date the sediments beyond the Holocene, however, the relatively slow bleaching of the post-IR IRSL signal poses challenges on applying it to young sediments, especially for the sediments deposited during the last millennium. In this study, we investigated the feasibility of using post-IR IRSL signal from potassium feldspar to date the earthquake events of the last millennium by employing modern sag pond deposits with different sorting and expected equivalent dose(De)of 0Gy. Choosing an appropriate measurement procedure and identifying the well bleached pottassium feldspar grains are essential for post-IR IRSL dating of young sediments. The non-fading characteristic of the post-IR IRSL170 signal measured at 170℃ following a prior IR stimulation at 110℃ was verified by employing the De plateau test with respect to the signal integration interval and IR stimulation temperature together. Reducing the amount of potassium feldspar grains mounted on an aliquot would help reveal the among grains variation of bleaching level of post-IR IRSL170 signal before depostion and identify the most sufficiently bleached grains. Therefore, the post-IR IRSL170 De values of 2mm aliquots were measured for three samples with different sedimentary textures. The median of De distribution of well sorted and stratified sag pond deposits is consistent with the minimum De value inferred from the minimum age model(MAM-3) and finite mixture model(FMM), while for the poorly sorted deposits, the median is significantly overestimated compared with the minimum De values from the MAM-3 and the FMM. The minimum De values of 0.6~0.8Gy of all three samples are consistent with the unbleachable residual dose previously reported for post-IR IRSL signals measured at similar temperature for well bleached samples. It implies that by combined use of small aliquot and statistical age models, the well-bleached potassium feldspar grains could be identified. Such an intrinsic unbleachable component needs to be properly corrected when earthquake events of last millennium are to be dated in this area. Otherwise, the post-IR IRSL170 age would be overestimated by 200~300a.
The post-IR IRSL170 procedure investigated in this study is not only applicable for dating the paleoearthquake events along the Altyn Tagh Fault, but also with great potential to be applied to other tectonically active area. With consideration of the potential variability in post-IR IRSL signal characteristics of potassium feldspar grains from different origins, the signal stability needs to be routinely inspected. The modern analog sample would also be informative for justifying the measurement procedure and analytical method employed. 相似文献
The infrared stimulated luminescence(IRSL)signal of potassium feldspar is an alternative, and it is in usual an order of maginitude more sensitive to raidation than the quartz OSL signal. The enhanced signal-to-noise ratio makes it applicable to young samples. The post-IR IRSL signal has been successfully applied to date the sediments beyond the Holocene, however, the relatively slow bleaching of the post-IR IRSL signal poses challenges on applying it to young sediments, especially for the sediments deposited during the last millennium. In this study, we investigated the feasibility of using post-IR IRSL signal from potassium feldspar to date the earthquake events of the last millennium by employing modern sag pond deposits with different sorting and expected equivalent dose(De)of 0Gy. Choosing an appropriate measurement procedure and identifying the well bleached pottassium feldspar grains are essential for post-IR IRSL dating of young sediments. The non-fading characteristic of the post-IR IRSL170 signal measured at 170℃ following a prior IR stimulation at 110℃ was verified by employing the De plateau test with respect to the signal integration interval and IR stimulation temperature together. Reducing the amount of potassium feldspar grains mounted on an aliquot would help reveal the among grains variation of bleaching level of post-IR IRSL170 signal before depostion and identify the most sufficiently bleached grains. Therefore, the post-IR IRSL170 De values of 2mm aliquots were measured for three samples with different sedimentary textures. The median of De distribution of well sorted and stratified sag pond deposits is consistent with the minimum De value inferred from the minimum age model(MAM-3) and finite mixture model(FMM), while for the poorly sorted deposits, the median is significantly overestimated compared with the minimum De values from the MAM-3 and the FMM. The minimum De values of 0.6~0.8Gy of all three samples are consistent with the unbleachable residual dose previously reported for post-IR IRSL signals measured at similar temperature for well bleached samples. It implies that by combined use of small aliquot and statistical age models, the well-bleached potassium feldspar grains could be identified. Such an intrinsic unbleachable component needs to be properly corrected when earthquake events of last millennium are to be dated in this area. Otherwise, the post-IR IRSL170 age would be overestimated by 200~300a.
The post-IR IRSL170 procedure investigated in this study is not only applicable for dating the paleoearthquake events along the Altyn Tagh Fault, but also with great potential to be applied to other tectonically active area. With consideration of the potential variability in post-IR IRSL signal characteristics of potassium feldspar grains from different origins, the signal stability needs to be routinely inspected. The modern analog sample would also be informative for justifying the measurement procedure and analytical method employed. 相似文献
19.
Sediments of river deltas provide valuable records of past coastal environments. Optically-stimulated luminescence (OSL) dating has become an alternative to radiocarbon dating for constraining the sediment chronology in large deltas that allow for sufficient sunlight bleaching of sediments during the fluvial transport. However, its applicability to smaller deltas with mountainous riverine systems has not been confirmed yet. To check this, we examine multiple signals from two Holocene sediment cores in the wave-dominated Thu Bon River delta in central Vietnam. Two cores were collected, respectively, 3.9 km and 1.2 km inland from the present shoreline and both show a >-25-m thick succession of coarsening-upward mud to sand deposits. Coarse grains (180–250 μm in diameter) of quartz and K-feldspar, and fine grains (4–11 μm in diameter) of quartz and polymineral were extracted from the upper and lower parts of the cores for multi-grain measurements of quartz OSL, and of feldspar infrared-stimulated luminescence (IRSL) at 50 °C (IR50) and post-IR IRSL at 175 °C (pIRIR175) to determine burial ages. In addition, facies analysis and radiocarbon dating were conducted. The landward core consists of transgressive to early regressive estuarine and prodelta facies, which is overlain by a sandy beach-shoreface facies. The seaward core consists of a relatively simple shallowing-upward succession from muddy prodelta facies to sandy beach-shoreface facies. All luminescence ages except for pIRIR175 of fine grains are mostly consistent with the radiocarbon ages. Instead, pIRIR175 ages of fine grains are significantly overestimated with variable offsets. OSL and IR50 of fine grains provide reasonable age estimates, as these grains were likely well bleached during the transport even along a short and steep mountainous river. Consistent age estimates of all signals from sand indicate that sand was well-bleached in the beach and shoreface owing to the frequent sediment reworking by waves and currents. These results support the hypothesis that luminescence dating is applicable to Holocene wave-dominated deltas and reiterate that comparing different luminescence signals is an effective way to check reliability of the age estimates in environments where the sunlight bleaching is not ensured. 相似文献
20.
Stochastic modelling of multi-grain equivalent dose (De) distributions: Implications for OSL dating of sediment mixtures 总被引：1，自引：0，他引：1
A number of recent optically stimulated luminescence (OSL) studies have cited post-depositional mixing as a dominant source of equivalent dose (De) scatter across a range of sedimentary environments, including those previously considered ‘best suited’ for OSL dating. The potentially insidious nature of sediment mixing means that this problem may often only be identifiable by careful statistical analysis of De data sets. This study aims to address some of the important issues associated with the characterisation and statistical treatment of mixed De distributions at the multi-grain scale of analysis, using simulated De data sets produced with a simple stochastic model. Using this Monte Carlo approach we were able to generate theoretical distributions of single-grain De values, which were then randomly mixed together to simulate multi-grain aliquot De distributions containing a known number of mixing components and known corresponding burial doses. A range of sensitivity tests were undertaken using sediment mixtures with different aged dose components, different numbers of mixing components, and different types of dose component distributions (fully bleached, heterogeneously bleached and significantly overdispersed De distributions). The results of our modelling simulations reveal the inherent problems encountered when dating mixed sedimentary samples with multi-grain De estimation techniques. ‘Phantom’ dose components (i.e. discrete dose populations that do not correspond to the original single-grain mixing components) are an inevitable consequence of the ‘averaging’ effects of multi-grain De analysis, and prevent the correct number of mixing components being identified with the finite mixture model (FMM) for all of the multi-grain mixtures tested. Our findings caution against use of the FMM for multi-grain aliquot De data sets, even when the aliquots consist of only a few grains. 相似文献