共查询到20条相似文献，搜索用时 93 毫秒
1.
《地球物理学进展》2016,(3)
三分量地震技术在能源勘探中发挥了重要作用,并取得了明显的地质效果.在金属矿勘探中,三分量地震的效果如何,有助于解决什么样的地质问题,还未曾开展过这方面的试验研究.为探讨三分量地震技术在金属矿勘查中的探测效果,我们在对内蒙古准苏吉花铜钼矿区钻孔岩心标本进行密度和速度测试的基础上,开展了三分量地震试验研究.试验采用炸药震源激发,单个正交28 Hz三分量检波器接收,多次覆盖的工作方法.通过对三分量地震数据进行处理,获得了能够用于解释的纵波和转换波地震剖面.分析纵波和转换波地震剖面能够看出,纵波剖面上的波组特征更明显,转换波剖面上的信息量更大,把两者进行综合解释,有利于金属矿地震资料的解释.利用所获得岩矿石弹性参数和地质资料,对获得的试验地震剖面进行了解释,根据试验剖面上的地震波组特征,认为在该8勘探线地质剖面以外NE一侧,有可能寻找到深部隐伏金属矿. 相似文献
2.
多塔长跨斜拉桥受力复杂,采用轻质结合梁时结构地震响应更具特点.本文以某主跨为616m的三塔结合梁斜拉桥为工程背景,制作动力缩尺模型进行三台阵振动台试验.在单向一致激励振动台试验的基础上,进行多维激励、多点激励振动台试验,并与数值分析结果进行比较验证.试验结果表明:此结构的基本振型为中塔纵弯与主梁竖弯的耦合振动.纵向一致地震作用下,主塔及主梁均会有较大的地震响应;横向一致地震激励下,中塔地震响应较边塔更为不利.多点激励振动台试验表明,行波效应使得各构件地震响应不同程度增大;最后,通过多维地震激励下试验结果验证了规范中方向组合计算方法的准确性. 相似文献
3.
冻土区勘探一直是地震探测的一个难点.为了探测研究区的深部结构,分析可能的天然气水合物的分布情况及其冻土区地球物理响应特征。我们在研究区进行了高精度的二维地震勘探试验.本文主要介绍针对冻土区的地震资料野外采集技术试验方法,包括资料的静校正问题、冻土层反射成像问题及精细速度分析等.通过对这些试验结果的分析,作者总结出一套针对高原冻土区,地形起伏变化较大的地震野外施工方法和静校正方法,为今后类似地区的地震勘探及其他物探方法,提供了参数设置依据和一些经验. 相似文献
4.
子结构地震模拟振动台混合试验原理与实现 总被引：2，自引：0，他引：2
为了解决地震模拟振动台承载能力及台面尺寸对大型结构试验的限制,扩展振动台的功能,本文提出了子结构地震模拟振动台混合试验方法、试验过程及实时数值积分方法,并给出了试验子结构边界条件的两种模拟形式.通过一个简单框架结构的地震模拟振动台试验和子结构混合加载试验验证了该方法的可行性,并指出了该试验方法的主要技术问题.混合试验方法通过子结构技术和振动台试验相结合,解决了目前的地震模拟振动台试验和拟动力试验在设备规模和加载速度上的局限性. 相似文献
5.
6.
7.
结构抗震试验方法的发展 总被引：7，自引：3，他引：7
地震荷载极大的破坏性,使得结构抗震性能的研究成为一个被广泛关注的热点问题.为了提高结构抗震研究的试验能力和试验水平,近年来在传统结构抗震试验方法的基础上,出现了一些新的试验方式和方法.本文总结介绍了目前结构抗震试验方法的一些发展趋势,包括：（1）地震模拟振动台的大型化和多台化,以进行大比例模型甚至足尺模型试验或考虑大跨度结构地震动的非均匀性;（2）进行子结构试验的实时化,以实现数值子结构模型和试验子结构模型的实时结合;（3）进行试验设备的网络化,以提高试验设备的利用率,实现资源共享等,供有关研究者参考. 相似文献
8.
通过对农村民居特点的研究,提出一种新型、经济、简单、可靠的隔震技术—钢筋-沥青复合隔震墩.根据相关理论设计了相应的隔震墩试件.通过地震模拟振动台试验输入E1 Centro和Taft地震动与结构地震反应的对比,研究了钢筋-沥青复合隔震墩模型的振动特性.试验结果表明,隔震墩加速度折减系数在0.34 ～ 0.55之间,可有效... 相似文献
9.
10.
为了对地震作用下柔性导线连接的变电站电气设备间的相互作用进行研究,本文进行了不同垂度下柔性双分裂导线连接实体隔离开关和断路器的地震模拟振动台试验.振动台试验中采用无导线连接的单体设备以及三种不同松弛度导线连接设备体系,在不同强度的三种地震动输入下对耦联体系的动力响应进行了试验研究.试验结果表明:导线的存在使得耦联设备间... 相似文献
11.
为研究竖向压应力和高宽比对砖墙体抗震性能的影响,以砖墙体抗震承载力典型试验试件为基础,利用有限元分析软件ANSYS建立适当的空间模型。根据砖墙体的破坏模式和材料性能把墙体划分成块体单元、灰缝单元以及接触单元,为各部分材料选用不同的本构关系模型与破坏准则。并将计算结果与试验结果进行对比,验证文中模型的可适用性。选用经验证后的模型,变换竖向压应力和高宽比,得出相应的结论:墙体的开裂荷载和抗侧承载力随着高宽比的增大明显呈降低的趋势;不同高宽比的墙体,竖向压应力的影响规律不尽相同。 相似文献
12.
Lidija Krstevska Ljubomir Tashkov Vladimir Gocevski Mihail Garevski 《Bulletin of Earthquake Engineering》2010,8(2):421-450
The seismic stability of the facade brick-masonry walls of the machinery building of the Beauharnois powerhouse near Montreal,
Quebec, Canada were investigated numerically by use of non-linear models and applying experimental methods on site and on
the IZIIS’ seismic shake-table. The dynamic properties of the machinery building were obtained by ambient vibration measurements.
Based on these results, a model of a representative part of the building, consisting of steel frames and brick masonry wall,
was designed and constructed to the reduced scale at the IZIIS’ Dynamic Testing Laboratory and then tested on the two-component
shake-table. The geometry of the original structure was completely scaled to 1/3, consisting of many realistically simulated
details such us: brick layers, steel columns, openings, window frames, steel connectors between brick layers, number of layers,
brick dimensions, etc. The material used for the model was: original steel for the frame structure and bricks of reduced mechanical
properties for the masonry wall, close to the similitude requirements according to the Backingham’s theorem, valuable for
adequate artificial—mass simulation model as well as true replica simulation model. More than 50 seismic tests were performed
considering the design earthquake Nahanni NWT, H1, with a time scaling factor of 31/2, and acceleration scaling factor 1, according to the model design rules. The intensity of the applied input earthquake excitation
was from 0.05 to 1.2 g. The design peak acceleration of Nahanni earthquake was 0.2 g. The cracks development was stated at
0.7 g input acceleration. These were concentrated around the openings. No collapse happened even under the strongest earthquake
input. The numerical part of this paper deals with formulation/application of the critical plane approach to seismic analysis
of masonry structures. Starting with the constituents, i.e. mortar and bricks, the macroscopic strength properties of masonry
were established based on numerical homogenization. Generally, based on all the performed experimental tests, considering
some simplifications and assumptions in the constructing details, as well as in the design of the model, the global conclusion
is that the existing wall is very well incorporated in the steel structure of the powerhouse. The complementary stiffness
of the steel frame and the brick masonry wall produces interactive deformation of the system. Only local cracking and relative
displacement between the wall and the steel frames could be expected in the case of a strong earthquake. 相似文献
13.
提出了带竖向构造钢筋再生混凝土砖砌体结构,进行了2个两层再生混凝土砖砌体房屋结构1/2缩尺模型的模拟地震振动台试验研究,2个结构模型的墙体厚度均为120 mm,一层设有门洞和窗洞,二层设有窗洞。2个模型中,1个为带竖向构造钢筋再生混凝土砖砌体房屋,1个为普通无竖向构造钢筋再生混凝土砖砌体房屋。试验中输入El Centro地震动,测试分析了台面加速度反应、一层和二层顶板加速度反应、结构层间位移反应以及各阶段结构损伤与破坏特征等。研究表明:带竖向构造钢筋再生混凝土砖砌体房屋比普通再生混凝土砖砌体房屋的破坏程度轻,墙体裂缝位置相对错动小,抗震性能显著提高;带竖向构造钢筋再生混凝土砖砌体房屋可用于地震区村镇建筑。 相似文献
14.
Most buildings in Singapore are lightly reinforced concrete structures, which are mainly designed for gravity loading only, because Singapore is an island country located in a low‐to‐moderate seismic region. The dynamic properties of a typical high‐rise residential building with a long, narrow rectangular floor plan are studied using both experimental and numerical methods. The effects of the brick infill walls and the flexible diaphragms on the dynamic characteristics of the building are discussed in detail. The results from the ambient vibration tests are correlated with the numerical results of three different finite element models with different levels of sophistication. They include a bare frame model, a frame model with brick infill walls, and a frame model with both brick infill walls and flexible diaphragms. The dynamic properties of the third model match very well with the measured results in terms of both the natural frequencies and the mode shapes. The correlation results demonstrate the respective effects of the brick infill walls and the flexible diaphragms on the dynamic characteristics of the narrow‐rectangle building structure. Copyright © 2006 John Wiley & Sons, Ltd. 相似文献
15.
混凝土板墙加固后墙片与剪力墙性能的对比研究 总被引：1，自引：0，他引：1
首先通过3个墙片的水平低周反复伪动力试验,对比研究了混凝土板墙加固后墙片与剪力墙的承载力、耗能能力等各项抗震性能。由于试验条件的限制,试验仅对比研究了120mm混凝土剪力墙与双面60mm混凝土板墙加固后墙片的抗震性能。在试验基础上,利用有限元软件建立合理的计算模型,将计算结果与试验结果进行了对比分析;利用该计算模型模拟了用不同厚度的混凝土板墙加固墙片和混凝土剪力墙,系统分析了混凝土板墙加固后墙片与剪力墙的极限承载力,分析了将加固后墙片看作抗震墙的可行性。通过有限元的分析,弥补了试件不足的缺陷,完善了研究方法。 相似文献
16.
This paper presents a procedure to compute the values of degradation factors of p-y curves in the pseudo-static analysis of piles in liquefiable soils. Three-dimensional finite-element model was used for the computation of p and y values using OpenSees computer package. The piles were modeled using beam-column elements and elastic section. The soil continuum was modeled using brick elements and a two-surface plasticity model. By comparing the results of models in two cases of liquefiable and non-liquefiable, values of degradation factors were obtained. Validation of the degradation factors computed was conducted through the centrifuge test results. The simulation results showed a similar trend between degradation factor variation in different densities and sands. With increasing depth, the degradation factor increased. By comparing the results of pseudo-static analysis with the centrifuge test results, it was concluded that the use of the p-y curves with computed degradation factors in liquefiable sand gave reasonable results. 相似文献
17.
18.
Collapse behavior of a brick masonry house using a shaking table and numerical simulation based on the extended distinct element method 总被引：1，自引：1，他引：0
T. Nakagawa T. Narafu H. Imai T. Hanazato Q. Ali C. Minowa 《Bulletin of Earthquake Engineering》2012,10(1):269-283
Damage caused by devastating earthquakes has occurred in many developing countries. In order to mitigate such damage by promoting
the study of adequate seismic design strategies, the authors conducted a dynamic collapse test on 3 m × 3 m × 3 m brick masonry
house constructed with Pakistani bricks, using a one-direction horizontal large-scale shaking table. In order to analyze and
simulate seismic performance of the masonry structures, the authors applied a new numerical simulating method based on the
Extended Distinct Element Method (EDEM) and conducted collapse simulations of the brick masonry house behavior during the
shaking table tests. In the numerical simulation model, bricks were assumed to be rigid bodies, and mortar was modeled using
a mortar spring that consists of a normal spring and a shear spring. The parameters of each mortar spring were defined based
on the results of material tests. Simulated results showed various collapsing processes, and the simulated aspects were found
to be similar to the results of the shaking table tests. 相似文献
19.
Many older unreinforced masonry (URM) buildings feature timber floors and solid brick masonry. Simple equivalent frame models can help predicting the expected failure mechanism and estimating the strength of a URM wall. When modelling a URM wall with an equivalent frame model rather than, for example, a more detailed simplified micro-model, the strengths of the piers and spandrels need to be estimated from mechanical or empirical models. Such models are readily available for URM piers, which have been tested in many different configurations. On the contrary, only few models for spandrel strength have been developed. This paper reviews these models, discusses their merits, faults and compares the predicted strength values to the results of recent experimental tests on masonry spandrels. Based on this assessment, the paper outlines recommendations for a new set of strength equations for masonry spandrels. 相似文献
20.
砖砌体是被广泛应用的建筑材料,大量学者对砖砌体的压缩和拉伸行为特性以及应力-应变关系进行了试验研究。研究发现:砖砌体表现出与混凝土相近的应力-应变关系,为基于混凝土应力-应变关系模型发展砖砌体的应力-应变关系模型提供了基础。对已经提出的几种不同的砖砌体应力-应变关系模型进行了比较,通过比较分析,基于中国混凝土应力-应变关系模型,推荐了可用于估计砖砌体单轴压缩和拉伸载荷下应力-应变曲线的简单分析模型,模型中使用的参数不仅可以很容易地通过实验获得,而且常在规范中被规定使用。 相似文献