首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 555 毫秒
1.
Canopy turbulence plays an important role in mass and energy exchanges at the canopy-atmosphere interface. Despite extensive studies on canopy turbulence over a flat terrain, less attention has been given to canopy turbulence in a complex terrain. The purpose of this study is to scrutinize characteristics of canopy turbulence in roughness sublayer over a hilly forest terrain. We investigated basic turbulence statistics, conditionally sampled statistics, and turbulence spectrum in terms of different atmospheric stabilities, wind direction and vertical structures of momentum fluxes. Similarly to canopy turbulence over a homogeneous terrain, turbulence statistics showed coherent structure. Both quadrant and spectrum analysis corroborated the role of intermittent and energetic eddies with length scale of the order of canopy height, regardless of wind direction except for shift of peak in vertical wind spectrum to relatively high frequency in the down-valley wind. However, the magnitude of the momentum correlation coefficient in a neutral condition was smaller than typical value over a flat terrain. Further scrutiny manifested that, in the up-valley flow, temperature skewness was larger and the contribution of ejection to both momentum and heat fluxes was larger compared to the downvalley flow, indicating that thermal instability and weaker wind shear in up-valley flow asymmetrically affect turbulent transport within the canopy.  相似文献   

2.
The results of an experiment carried out in the summer of 1988 in the forest-steppe region of the USSR are given. The aim of the experiment was to study turbulent exchange between the atmosphere and a non-homogeneous underlying surface consisting of a patchwork quilt of agricultural lands sown with different crops (hereafter called chessboard-type inhomogeneities). Simultaneous measurements of turbulent fluxes of heat, momentum and humidity by the eddy-correlation methods and also the measurements of the mean wind velocity and temperature are described. The values of turbulent fluxes calculated from the profile measurements are in good agreement with those obtained from the eddy-correlation measurements. Thus it may be concluded that the universal functions of Monin-Obukhov similarity theory (determined from measurements over a flat and homogeneous underlying surface) pertain also to a non-homogeneous (chessboard-type) underlying surface.  相似文献   

3.
Flux Footprint Simulation Downwind of a Forest Edge   总被引：2，自引：2，他引：0  
Surface fluxes, originating from forest patches, are commonly calculated from atmospheric flux measurements at some height above that patch using a correction for flux arising from upwind surfaces. Footprint models have been developed to calculate such a correction. These models commonly assume homogeneous turbulence, resulting in a simulated atmospheric flux equal to the average surface flux in the footprint area. However, atmospheric scalar fluxes downwind of a forest edge have been observed to exceed surface fluxes in the footprint area. Variations in atmospheric turbulence downwind of the forest edge, as simulated with an E – model, can explain enhanced atmospheric scalar fluxes. This E – model is used to calculate the footprint of atmospheric measurements downwind of a forest edge. Atmospheric fluxes appear mainly enhanced as a result of a stronger sensitivity to fluxes from the upwind surface. A sensitivity analysis shows that the fetch over forest, necessary to reach equilibrium between atmospheric fluxes and surface fluxes, tends to be longer for scalar fluxes as compared to momentum fluxes. With increasing forest density, atmospheric fluxes deviate even more strongly from surface fluxes, but over shorter fetches. It is concluded that scalar fluxes over forests are commonly affected by inhomogeneous turbulence over large fetches downwind of an edge. It is recommended to take horizontal variations in turbulence into account when the footprint is calculated for atmospheric flux measurements downwind of a forest edge. The spatially integrated footprint is recommended to describe the ratio between the atmospheric flux and the average surface flux in the footprint.  相似文献   

4.
Momentum and turbulent kinetic energy (TKE) budgets across a forest edge have been investigated using large-eddy simulation (LES). Edge effects are observed in the rapid variation of a number of budget terms across this vegetation transition. The enhanced drag force at the forest edge is largely balanced by the pressure gradient force and by streamwise advection of upstream momentum, while vertical turbulent diffusion is relatively insignificant. For variance and TKE budgets, the most important processes at the forest edge are production due to the convergence (or divergence) of the mean flow, streamwise advection, pressure diffusion and enhanced dissipation by canopy drag. Turbulent diffusion, pressure redistribution and vertical shear production, which are characteristic processes in homogeneous canopy flow, are less important at the forest transition. We demonstrate that, in the equilibrated canopy flow, a substantial amount of TKE produced in the streamwise direction by the vertical shear of the mean flow is redistributed in the vertical direction by pressure fluctuations. This redistribution process occurs in the upper canopy layers. Part of the TKE in the vertical velocity component is transferred by turbulent and pressure diffusion to the lower canopy levels, where pressure redistribution takes place again and feeds TKE back to the streamwise direction. In this TKE cycle, the primary source terms are vertical shear production for streamwise velocity variance and pressure redistribution for vertical velocity variance. The evolution of these primary source terms downwind of the forest edge largely controls the adjustment rates of velocity variances.  相似文献   

5.
Edge Flow and Canopy Structure: A Large-Eddy Simulation Study   总被引：4，自引：4，他引：0  
Sharp heterogeneities in forest structure, such as edges, are often responsible for wind damage. In order to better understand the behaviour of turbulent flow through canopy edges, large-eddy simulations (LES) have been performed at very fine scale (2 m) within and above heterogeneous vegetation canopies. A modified version of the Advanced Regional Prediction System (ARPS), previously validated in homogeneous conditions against field and wind-tunnel measurements, has been used for this purpose. Here it is validated in a simple forest-clearing-forest configuration. The model is shown to be able to reproduce accurately the main features observed in turbulent edge flow, especially the “enhanced gust zone” (EGZ) present around the canopy top at a few canopy heights downwind from the edge, and the turbulent region that develops further downstream. The EGZ is characterized by a peak in streamwise velocity skewness, which reflects the presence of intense intermittent wind gusts. A sensitivity study of the edge flow to the forest morphology shows that with increasing canopy density the flow adjusts faster and turbulent features such as the EGZ become more marked. When the canopy is characterized by a sparse trunk space the length of the adjustment region increases significantly due to the formation of a sub-canopy wind jet from the leading edge. It is shown that the position and magnitude of the EGZ are related to the mean upward motion formed around canopy top behind the leading edge, caused by the deceleration in the sub-canopy. Indeed, this mean upward motion advects low turbulence levels from the bottom of the canopy; this emphasises the passage of sudden strong wind gusts from the clearing, thereby increasing the skewness in streamwise velocity as compared with locations further downstream where ambient turbulence is stronger.  相似文献   

6.
A numerical model was developed to simulate neutrally stratified air flow over and through a forest edge. The spatially averaged equations for turbulent flow in vegetation canopies are derived as the governing equations. A first-order closure scheme with the capability of accounting for the bulk momentum transport process in vegetation canopies is employed. The averaged equations are solved numerically by a fractional time-step method and successive relaxation. The asymptotic solution in time is regarded as the steady-state solution. Comparisons of model output to the field measurements of Raynor (1971) indicate that the model provides a realistic mean flow.Momentum balance computations show that the pressure gradient induced by the wind blowing against the forest edge is significant and has the same order of magnitude as the drag force in the edge region. The edge effect involves the generation of drag forces, the appearance of a large pressure gradient, the upward deflection of mean flow and the transport of momentum into the edge of the canopy.  相似文献   

7.
Wind speed profiles above a forest canopy relate to scalar exchange between the forest canopy and the atmosphere. Many studies have reported that vertical wind speed profiles above a relatively flat forest can be classified by a stability index developed assuming wind flow above a flat plane. However, can such a stability index be used to classify vertical wind speed profiles observed above a sloping forest at nighttime, where drainage flow often occurs? This paper examines the use of the bulk Richardson number to classify wind speed profiles observed above a sloping forest at nighttime. Wind speed profiles above a sloping forest were classified by the bulk Richardson number Ri B . Use of Ri B distinguished between drainage flow, shear flow, and transitional flow from drainage flow to shear flow. These results suggest that Ri B is useful to interpret nighttime CO2 and energy fluxes above a sloping forest. Through clear observational evidence, we also show that the reference height should be high enough to avoid drainage-flow effects when calculating Ri B .  相似文献   

8.
The structure of turbulent flows along a transition between tall-forested canopies and forest clearings continues to be an active research topic in canopy turbulence. The difficulties in describing the turbulent flow along these transitions stem from the fact that the vertical structure of the canopy and its leaf area distribution cannot be ignored or represented by an effective roughness length. Large-eddy simulation (LES) runs were performed to explore the effect of a homogeneous variation in the forest leaf area index (LAI) on the turbulent flow across forest edges. A nested grid numerical method was used to ensure the development of a deep boundary layer above the forest while maintaining a sufficiently high resolution in the region close to the ground. It was demonstrated that the LES here predicted first-order and second-order mean velocity statistics within the canopy that agree with reported Reynolds-Averaged Navier–Stokes (RANS) model results, field and laboratory experiments. In the simulations reported here, the LAI was varied between 2 and 8 spanning a broad range of observed LAI in terrestrial ecosystems. By increasing the forest LAI, the mean flow properties both within the forest and in the clearing near the forest edge were altered in two fundamental ways: near the forest edge and into the clearing, the flow statistical properties resembled the so-called back-facing step (BFS) flow with a mean recirculation zone near the edge. Another recirculation zone sets up downstream of the clearing as the flow enters the tall forest canopy. The genesis of this within-forest recirculation zone can be primarily described using the interplay between the mean pressure gradients (forcing the flow) and the drag force (opposing the flow). Using the LES results, a simplified analytical model was also proposed to explain the location of the recirculation zone inside the canopy and its dependence on the forest LAI. Furthermore, a simplified scaling argument that decomposes the mean velocity at the outflow edge into a superposition of ‘exit flow’ and BFS-like flow with their relative importance determined by LAI was explored.  相似文献   

9.
Mean Flow Near Edges and Within Cavities Situated Inside Dense Canopies   总被引：3，自引：3，他引：0  
A streamfunction-vorticity formulation is used to explore the extent to which turbulent and turbulently inviscid solutions to the mean momentum balance explain the mean flow across forest edges and within cavities situated inside dense forested canopies. The turbulent solution is based on the mean momentum balance where first-order closure principles are used to model turbulent stresses. The turbulently inviscid solution retains all the key terms in the mean momentum balance but for the turbulent stress gradients. Both exit and entry versions of the forest edge problem are explored. The turbulent solution is found to describe sufficiently the bulk spatial patterns of the mean flow near the edge including signatures of different length scales reported in canopy transition studies. Next, the ‘clearing inside canopy’ or the so-called ‘cavity’ problem is solved for the inviscid and turbulent solutions and then compared against flume experiments. The inviscid solution describes the bulk flow dynamics in much of the zones within the cavity. In particular, the solution can capture the correct position of the bulk recirculation zone within the cavity, although with a weaker magnitude. The inviscid solution cannot capture the large vertical heterogeneity in the mean velocity above the canopy, as expected. These features are better captured via the first-order closure representation of the turbulent solution. Given the ability of this vorticity formulation to capture the mean pressure variations and the mean advective acceleration terms, it is ideal for exploring the distributions of scalars and roughness-induced flow adjustments on complex topography.  相似文献   

10.
The effects of abrupt streamwise transitions of the aerodynamic roughness length ( $z_\mathrm{o}$ z o ) on the stable atmospheric boundary layer are evaluated using a series of large-eddy simulations based on the first Global Energy and Water Cycle Experiment Atmospheric Boundary Layer intercomparison study (GABLS1). Four $z_\mathrm{o}$ z o values spanning three orders of magnitude are used to create all possible binary distributions with each arranged into patches of characteristic length scales equal to roughly one-half, one, and two times the equivalent homogeneous boundary-layer height. The impact of the heterogeneity on mean profiles of wind speed and temperature, on surface fluxes of heat and momentum, and on internal boundary-layer dynamics are considered. It is found that $z_\mathrm{o}$ z o transitions do not significantly alter the functional relationship between the average surface fluxes and the mean profiles of wind speed and potential temperature. Although this suggests that bulk similarity theory is applicable for modelling the stable boundary layer over $z_\mathrm{o}$ z o heterogeneity, effective surface parameters must still be specified. Existing models that solve for effective roughness lengths of momentum and heat are evaluated and compared to values derived from the simulation data. The existing models are unable to accurately reproduce both the values of the effective aerodynamic roughness lengths and their trends as functions of patch length scale and stability. A new model for the effective aerodynamic roughness length is developed to exploit the benefits of the other models tested. It accurately accounts for the effects of the heterogeneity and stratification on the blending height and effective aerodynamic roughness length. The new model provides improved average surface fluxes when used with bulk similarity.  相似文献   

11.
Increased heat fluxes near a forest edge   总被引：1，自引：0，他引：1  
Summary ?Observations of sensible and latent heat flux above forest downwind of a forest edge show these fluxes to be larger than the available energy over the forest. The enhancement averages to 56 W m−2, or 16% of the net radiation, at fetches less than 400 m, equivalent to fetch to height ratios less than 15. The enhancement of turbulent energy fluxes is explained by advection and increases with the difference in temperature and humidity of the air over the upwind area as compared to the forest. The relatively high temperature and humidity of the upwind air are not caused by high surface heat fluxes, but are explained by the relatively low aerodynamic roughness of the upwind surface. Although the heat fluxes over forest are enhanced, the momentum fluxes are almost adjusted to the underlying forest. The different behaviour of heat and momentum fluxes is explained by absorption of momentum by pressure gradients near the forest edge. It is concluded that fetch requirements to obtain accurate surface fluxes from atmospheric observations need to be more stringent for scalar fluxes as compared to momentum fluxes. Received November 23, 2001; accepted May 13, 2002  相似文献   

12.
With the use of a sonic anemometer, vertical heat and momentum fluxes were measured at three different levels in an oak forest canopy. A quadrant analysis of the resulting data shows that approximately half of the transport occurs in extreme events lasting about 5 to 10% of the time. The partition of transport into momentum sweeps, bursts and interactions shows good agreement with existing data. The heat flux is analysed by observing the fluxes during the different momentum events and considering concurrent momentum and heat flux intensities by means of conditional probabilities. While low intensity (normal) events show similar probability distributions throughout the canopy, different structures appear at the three measurement heights for high intensity (extreme) events that can tentatively be explained by taking the temperature profile into account. This supports the idea that these events are coherent motions with scales comparable to the canopy height.  相似文献   

13.
Landscape discontinuities such as forest edges play an important role in determining the characteristics of the atmospheric flow by generating increased turbulence and triggering the formation of coherent tree-scale structures. In a fragmented landscape, consisting of surfaces of different heights and roughness, the multiplicity of edges may lead to complex patterns of flow and turbulence that are potentially difficult to predict. Here, we investigate the effects of different levels of forest fragmentation on the airflow. Five gap spacings (of length approximately 5h, 10h, 15h, 20h, 30h, where h is the canopy height) between forest blocks of length 8.7h, as well as a reference case consisting of a continuous forest after a single edge, were investigated in a wind tunnel. The results reveal a consistent pattern downstream from the first edge of each simulated case, with the streamwise velocity component at tree top increasing and turbulent kinetic energy decreasing as gap size increases, but with overshoots in shear stress and turbulent kinetic energy observed at the forest edges. As the gap spacing increases, the flow appears to change monotonically from a flow over a single edge to a flow over isolated forest blocks. The apparent roughness of the different fragmented configurations also decreases with increasing gap size. No overall enhancement of turbulence is observed at any particular level of fragmentation.  相似文献   

14.
Measurements of gradients of wind, temperature and humidity and of the corresponding turbulent fluxes have been carried out over a sparse pine forest at Jädra»s in Sweden. In order to ascertain that correct gradient estimates were obtained, two independent measuring systems were employed: one system with sensors at 10 fixed levels on a 51 m tower and another with reversing sensors for temperature and humidity, covering the height interval 23 to 32 m. Turbulent fluxes were measured at three levels simultaneously. Data from three field campaigns: in June 1985, June 1987 and September 1987 have been analyzed. The momentum flux is found on the average to be virtually constant from tree top level, at 20 to 50 m. The average fluxes of sensible and latent heat are not so well behaved. The ratio of the non-dimensional gradients of wind and temperature to their corresponding values under ideal conditions (low vegetation) are both found to be small immediately above the canopy (about 0.3 for temperature and 0.4 for wind). With increasing height, the ratios increase, but the values vary substantially with wind direction. The ratios are not found to vary systematically with stability (unstable stratification only studied). The ratio of the non-dimensional humidity gradient to the corresponding non-dimensional potential temperature gradient (equivalent to k h /k w ) is found to be unity for (z – d)/L v less than about –0.1 and about 1.4 for near neutral stratification, but the scatter of the data is very large.  相似文献   

15.
Numerical analysis of flux footprints for different landscapes   总被引：5，自引：0，他引：5  
Summary A model for the canopy – planetary boundary layer flow and scalar transport based on E- closure was applied to estimate footprint for CO2 fluxes over different inhomogeneous landscapes. Hypothetical heterogeneous vegetation patterns – forest with clear-cuts as well as hypothetical heterogeneous relief – a bell-shaped valley and a ridge covered by forest were considered. The distortions of airflow caused by these heterogeneities are shown – the upwind deceleration of the flow at the ridge foot and above valley, acceleration at the crest and the flow separation with the reversed flow pattern at lee slopes of ridge and valley. The disturbances induce changes in scalar flux fields within the atmospheric surface layer comparing to fluxes for homogeneous conditions: at a fixed height the fluxes vary as a function of distance to disturbance. Correspondingly, the flux footprint estimated from model data depends on the location of the point of interest (flux measurement point) and may significantly deviate from that for a flat terrain. It is shown that proposed method could be used for the choice of optimal sensor position for flux measurements over complex terrain as well as for the interpretation of data for existing measurement sites. To illustrate the latter the method was applied for experimental site in Solling, Germany, taking into account the complex topography and vegetation heterogeneities. Results show that in certain situations (summer, neutral stratification, south or north wind) and for a certain sensor location the assumptions of idealized air flow structure could be used for measurement interpretation at this site, though in general, extreme caution should be applied when analytical footprint models are used in the interpretation of flux measurements over complex sites.  相似文献   

16.
Summary The interaction of flow with the canopy structure is shown for an oak forest with hornbean trees (Carpinus betulus) as dense undergrowth using a large sample of 15 min mean profiles for the winter (without leaves) and the summer period (with leaves). The usefulness of the canopy flow index is analysed.To identify the processes involved in the momentum interaction a first-order closure model is interactively used. An approximation of the foliage area density from wind profile measurements is derived.With 7 Figures  相似文献   

17.
Large-eddy simulations of the neutrally-stratified flow over an extended homogeneous forest were used to calibrate a canopy model for the Reynolds-averaged Navier–Stokes (RaNS) method with the $k-\varepsilon $ k - ε turbulence model. It was found that, when modelling the forest as a porous medium, the canopy drag dissipates the turbulent kinetic energy (acts as a sink term). The proposed model was then tested in more complex flows: a finite length forest and a forested hill. In the finite length forest, the destruction of the turbulent kinetic energy by the canopy was overestimated near the edge, for a length approximately twice the tree height. In the forested hill, the model was less accurate inside the recirculation zone and overestimated the turbulent kinetic energy, due to an incorrect prediction of the production term. Nevertheless, the canopy model presented here provided consistent results in both a priori and a posteriori tests and improved the accuracy of RaNS simulations with the $k-\varepsilon $ k - ε model.  相似文献   

18.
Wind-flow dynamics has been extensively studied over horizontally uniform canopies, but agricultural plantations structured in rows such as vineyards have received less attention. Here, the wind flow over a vineyard is studied in neutral stratification from both large-eddy simulation (LES) and in situ measurements. The impact of row structure on the wind dynamics is investigated over a range of wind directions from cross-row to down-row, and a typical range of row aspect ratio (row separation/height ratio). It is shown that the mean flow over a vineyard is similar to that observed in uniform canopies, especially for wind directions from cross-row to diagonal. For down-row winds, the mean flow exhibits noticeable spatial variability across each elementary row-gap pattern, as the wind is channeled in the inter-row. This spatial variability increases with the aspect ratio. With down-row winds the turbulent structures are also more intermittent and generate larger turbulent kinetic energy and momentum flux. The displacement height and roughness length of the vineyard vary with the aspect ratio in a way similar to their variation with canopy density in uniform canopies. Both parameters take smaller values in down-row wind flow, for which the canopy appears more open. The analysis of velocity spectra and autocorrelation functions shows that vineyard canopies share similar features to uniform canopies in terms of turbulent coherent structures, with only minor changes with wind direction.  相似文献   

19.
Numerical simulations of flow over hills that are partially covered with a forest canopy are performed. This represents a much more realistic situation than previous studies that have generally concentrated on hills that are fully-forested. The results show that the flow over the hill is sensitive to where on the hill the forest is positioned. In particular, for low slopes flow separation is predominantly located within the forest on the lee slope. This has implications for the transport of scalars in the forest canopy. For large hills the results show more variability in scalar concentrations within the canopy compared to either a fully-forested hill or a patch of forest over flat terrain. These results are likely to have implications for a range of applications including the siting and interpretation of flux measurements over forests in complex terrain, predicting wind damage to trees and wind-farm developments. Calculation of the hill-induced pressure drag and canopy-plus-surface stress shows a strong sensitivity to the position of the forest relative to the hill. Depending on the position of the forest the individual drag terms may be strongly enhanced or reduced and may even change sign. The net impact is generally to reduce the total drag compared to an equivalent fully-forested hill, but the amount of the reduction depends strongly on the position of the forest canopy on the hill. In many cases with large, wide hills there is a clear separation of scales between the adjustment of the canopy to a forest edge (of order 6 ? 8L c, where L c is the canopy adjustment length scale) and the width of the hill. This separation means that the hill-induced pressure and flow fields and the forest-edge induced pressure and flow fields can in some sense be considered as acting separately. This provides a means of explaining the combined effects of partial forestation and terrain. It also offers a simple method for modelling the changes in drag over a hill due to partial forest cover by considering the impact of the hill and the partial canopy separately. Scaling arguments based on this idea successfully collapse the modelled drag over a range of different hill widths and heights and for different canopy parameters. This offers scope for a relatively simple parametrization of the effects of partial forest cover on the drag over a hill.  相似文献   

20.
Eddy-covariance observations above the densely built-up Centre of Nanjing were made from December 2011 to August 2012. Separate eddy-covariance systems installed at two levels on a 36-m tower located on a rooftop were operated simultaneously, and observations grouped into two sectors (A, B) according to the prevalent wind directions. For sector A, where the nearby buildings are all below the lower measurement level, the sensible heat and momentum fluxes are generally greater at the upper level. For sector B, where several high-rise buildings are located upwind, the sensible heat and momentum fluxes at the upper level are close to those at the lower level. The analysis shows that the turbulent eddy characteristics differ between the two wind sectors, leading to a different behaviour of turbulent exchange between the two levels. A hypothesis is proposed that addresses the vertical variation of turbulent fluxes in the urban roughness sublayer (RSL). For sector A, the buildings block the flow, change the trajectory of scalars, and distort the footprint of scalar fluxes; this ‘blocking effect’ is believed to lead to a smaller sensible heat flux above the canopy layer. Such an effect should decrease with height in the RSL, explaining the increase of the observed turbulent heat flux with height. In addition, the presence of non-uniform building heights adversely affects turbulence organization around the canopy top, and likely elevates the inflection point of the mean flow to a higher elevation close to the upper measurement level, where larger shear results in a larger momentum flux. For sector B, wake effects from the nearby high-rise buildings strongly reduce turbulence organization at higher elevations, leading to similar sensible heat and momentum fluxes at both measurement levels.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号