共查询到20条相似文献，搜索用时 32 毫秒
1.
Francisco Salamanca Andrea Krpo Alberto Martilli Alain Clappier 《Theoretical and Applied Climatology》2010,99(3-4):331-344
The generation of heat in buildings, and the way this heat is exchanged with the exterior, plays an important role in urban climate. To analyze the impact on urban climate of a change in the urban structure, it is necessary to build and use a model capable of accounting for all the urban heat fluxes. In this contribution, a new building energy model (BEM) is developed and implemented in an urban canopy parameterization (UCP) for mesoscale models. The new model accounts for: the diffusion of heat through walls, roofs, and floors; natural ventilation; the radiation exchanged between indoor surfaces; the generation of heat due to occupants and equipments; and the consumption of energy due to air conditioning systems. The behavior of BEM is compared to other models used in the thermal analysis of buildings (CBS-MASS, BLAST, and TARP) and with another box-building model. Eventually, a sensitivity analysis of different parameters, as well as a study of the impact of BEM on the UCP is carried out. The validations indicate that BEM provides good estimates of the physical behavior of buildings and it is a step towards a modeling tool that can be an important support to urban planners. 相似文献
2.
应用基于多层城市冠层方案BEP(Building Environment Parameterization)增加室内空调系统影响的建筑物能量模式BEM(Building Energy Model)方案的WRF模式,模拟研究重庆热岛的特征、成因以及局地环流对热岛形成的影响。文中共有两个算例,一为重庆真实下垫面算例,称之为URBAN算例,二为将城市下垫面替换为耕地下垫面的对比算例,称之为NOURBAN算例。结果表明:1)WRF方案模拟结果与观测2 m气温的对比吻合较好,误差主要出现在正午温度峰值和凌晨温度谷值处,由城市下垫面特性及城市内建筑分布误差引起。2)BEP+BEM方案较好地模拟出了重庆地区的热岛分布的空间和时间特征。重庆市温度的分布受地形和城市下垫面的双重影响,越靠近城区,温度的分布受城市化影响就越大,在海拔低处,温度就越高。3)城区立体三维表面对辐射的陷阱作用导致城市表面总体反射率小,向上短波辐射小于郊区约20 W/m~2。城市表面以感热排放为主,而郊区则表现为潜热的作用占主导。夜间城市地表储热以及空调废热向大气释放,是城市热岛形成的重要原因。4)模拟区域背景风场主要为东南风,局地环流呈现出越靠近山区风速越大、城市区域风速较小的特性,体现了城市密集的建筑群对低层大气流场的空气动力学效应,以及复杂山谷地形的山谷风环流特性。在市区的西侧和东南侧均有高大山脉阻挡,山脉对城市出流的阻碍作用、气流越山与绕流运动对城市热岛的形成有一定影响。 相似文献
3.
Recent studies show that the fluxes exchanged between buildings and the atmosphere play an important role in the urban climate. These fluxes are taken into account in mesoscale models considering new and more complex Urban Canopy Parameterizations (UCP). A standard methodology to test an UCP is to use one-dimensional (1D) off-line simulations. In this contribution, an UCP with and without a Building Energy Model (BEM) is run 1D off-line and the results are compared against the experimental data obtained in the BUBBLE measuring campaign over Basel (Switzerland) in 2002. The advantage of BEM is that it computes the evolution of the indoor building temperature as a function of energy production and consumption in the building, the radiation coming through the windows, and the fluxes of heat exchanged through the walls and roofs as well as the impact of the air conditioning system. This evaluation exercise is particularly significant since, for the period simulated, indoor temperatures were recorded. Different statistical parameters have been calculated over the entire simulated episode in order to compare the two versions of the UCP against measurements. In conclusion, with this work, we want to study the effect of BEM on the different turbulent fluxes and exploit the new possibilities that the UCP–BEM offers us, like the impact of the air conditioning systems and the evaluation of their energy consumption. 相似文献
4.
针对京津冀高温模拟,综合运用卫星和地面气象观测数据、参数敏感性试验等技术方法,确定了耦合了多层城市冠层模型的中尺度数值模式（WRF/BEP/BEM）的地表反照率、比辐射率和人为热等参数的本地化配置。数值对比试验表明,参照试验中优化地表反照率、比辐射率和人为热（通过本地优化BEM输入参数来实现）等参数后,模式对京津冀高温模拟的效果均有显著提高,65%及以上的城市站点,参照试验比敏感性试验模拟误差降低0.5℃以上。经参数优化的WRF/BEP/BEM,较好地模拟了2010年以来京津冀地区5次极端高温过程,模拟结果与观测的标准差分别为1.4°C、0.8°C、0.9°C、1.0°C和0.7°C,分别较ERA5与观测的标准差减小26.3%、61.9%、40.0%、41.2%和36.3%。参数本地优化的WRF/BEP/BEM,可进一步应用于京津冀极端高温的相关研究,特别是城市化对极端高温作用机理的研究。 相似文献
5.
空调系统对城市大气温度影响的模拟研究 总被引：5，自引：0，他引：5
人为热排放对城市边界层气候效应的影响起着举足轻重的作用。在人为热源的组成中,建筑物内部的能源消耗、热量产生以及室内外热量传输与交换,对于城市热环境的改变有着非常重要的作用。因此,为研究室内空调系统的产热和通过屋顶、墙面、地面进行室内外热量传输扩散,并对室外热环境产生的影响,运用WRF（Weather Research and Forecasting Model）模式,选取BEP+BEM城市冠层参数化方案,即基于多层城市冠层方案BEP（Building Effect Parameterization）增加室内空调系统影响的建筑物能量模式BEM（Building Energy Model）的方案,以南京2010年8月2—3日,夏季三伏天晴天小风天气作为背景天气进行模拟研究。结果表明,采用WRF模式考虑空调系统室内、外能量交换的BEP+BEM参数化方案,能够更好地模拟出夏季晴天城市近地层气温。当假设空调全天开启时,白天模拟值与观测值吻合较好。夜间温度模拟值高于观测值,在22时—次日00时（北京时）,存在1℃左右的偏差。白天空调系统开启对于城市近地层气温的影响不明显,而夜间使得城市气温普遍升高0.6℃,尤其是在居民区密集的地方,22—23时最大有2℃左右的升温。当调整室内空调目标温度从25℃调至27℃时,空调系统能量总释放量减少12.66%,13—16时温度下降最大,平均约为1℃,建筑物越是密集,温度下降幅度越大。 相似文献
6.
为研究不同人为热源引入方案对城市边界层结构模拟性能的影响，以杭州地区为例，在区域边界层模式（RBLM）中引入一种新人为热源处理方案，即对城市中的人为热排放分层考虑，将低层的人为热源加入地表能量平衡方程，将高层人为热源分布与建筑物高度和密度联系起来，加入热量方程中，同时考虑了人为热源强度的日变化。数值试验结果表明，这是一种比较合理的处理方案。人为热源引入方案对城市边界层结构的影响表现在:气温、湍流动能增加，并通过湍流交换输送到较高层大气；大气不稳定度增加，混合层高度最高抬升了400 m；城市地区上升速度增加，热岛环流加强；白天人为热源一般为太阳辐射的10%～20%，对地气交换的影响较小。夜间没有了太阳辐射能量，对地气交换的影响比日间更明显；冬季低层湍流活动加强，湍能约增加40%，大气层结稳定度降低。 相似文献
7.
The Atmospheric Boundary Layer Over Baltic Sea Ice 总被引：4，自引：0，他引：4
A new parametrization for the surface energy balance of urban areas is presented. It is shown that this new method can represent some of the important urban phenomena, such as an urban heat island and the occurrence of a near-neutral nocturnal boundary layer with associated positive turbulent heat fluxes, unlike the traditional method for representing urban areas within operational numerical weather prediction (NWP) models. The basis of the new parametrization is simple and can be applied easily within an operational NWP model. Also, it has no additional computational expense compared to the traditional scheme and is hence applicable for operational forecasting requirements. The results show that the errors for London within the Met Office operational mesoscale model have been significantly reduced since the new scheme was introduced. The bias and root-mean-square (rms) errors have been approximately halved, with the rms error now similar to the model as a whole. The results also show that a seasonal cycle still exists in the model errors, but it is suggested that this may be caused by anthropogenic heat sources that are neglected in the urban scheme.The British Crowns right to retain a non-exclusive royalty-free license in and to any copyright is acknowledged. 相似文献
8.
Simulating the causal elements of urban heat islands 总被引：8，自引：0，他引：8
A comparison was made between the resultant surface temperatures and sensible heat fluxes of building interfaces calculated by steady-state and transient (implicit) methods. Both procedures used identical environmental (summer and winter) input. For exterior conditions, the results indicated that the correlation between the two methods is sufficiently large, enabling them to be used interchangeably for the spatial analysis of urban canopy layers of entire cities. Using a steady-state approach as a surrogate for unsteady conditions, computer resources can be saved up to a factor of ten. An urban energy budget model (URBAN 3) has been used to demonstrate that the distribution of sensible heat flux and net longwave radiation — the prime causes of urban heat-island generation — was far from the homogeneity assumed in many macroscopic models or even some street-level studies. The individual emanations of reradiation and sensible heat flux showed different diurnal and spatial patterns. Under the input scenarios used, daytime heat islands assumed a doughnut shape in the inner city. It is believed that many of the lower boundary conditions used in macroscopic numerical models are inadequate in light of this study. 相似文献
9.
A two-dimensional time-dependent Earth-atmosphere model is developed which can be applied to the study of a class of atmospheric boundary-layer flows which owe their origin to horizontal inhomogeneities with respect to surface roughness and temperature. Our main application of the model is to explore the governing physical mechanisms of nocturnal urban atmospheric boundarylayer flow.A case study is presented in which a stable temperature stratification is assumed to exist in the rural upwind area. It is shown through integration of the numerical model that as this air passes over a city, the heat is redistributed due to increased surface friction (and hence increased turbulent mixing). This redistribution of heat results in the formation of an urban heat island.Additional numerical integrations of the model are conducted to examine the dependence of induced perturbations on: (1) the upwind temperature inversion; (2) the geostrophic wind speed; and (3) urbanization. The results show a linear relationship between heat-island intensity and the rural temperature inversion with the heat island increasing in intensity as the upwind inversion becomes stronger; that the heat-island intensity close to the surface is inversely proportional to the geostrophic wind; and that the effects of anthropogenic heat cause an increase in the perturbation temperature with the perturbation extending to higher altitudes. From this study, we conclude that with an upwind temperature inversion, a city of any size should generate a heat island as a result of increased surface roughness. The heat-island intensity should increase with city size because of two factors: larger cities are usually aerodynamically rougher; and larger cities have a larger anthropogenic heat output.Research supported in part by NSF Grant GA-16822. 相似文献
10.
An urban canopy-layer climate model 总被引：1，自引：0，他引：1
G. Mills 《Theoretical and Applied Climatology》1997,57(3-4):229-244
Summary This paper outlines a computer simulation model designed to assess the thermal characteristics of the urban canopy layer (UCL). In contrast to other UCL models, the layer simulated here includes both closed volumes (buildings) and open volumes (canyons). The purpose of the model is to allow the comparison of the climate impacts of different building group configurations. Traditional boundary-layer theory is applied to the surface urban boundary layer (UBL) which lies above the UCL and the derived relations are used to parameterize exchanges of momentum and heat across the UBL/UCL interface. The exterior energy budgets of the roof, walls and floor of the canopy are solved using an equilibrium surface temperature method. The open canopy and interior building air temperatures are found which are in agreement with the surface exchanges. Using measured data for Los Angeles in June, the output of the model is examined. The results show some agreement with measurement studies and suggest that the density of structures can have a substantial impact on UCL/UBL interaction.With 6 Figures 相似文献
11.
12.
Mingna Wang Xiaodong Yan Jiyuan Liu Xuezhen Zhang 《Theoretical and Applied Climatology》2013,114(3-4):407-416
This paper addresses the contribution of urban land use change to near-surface air temperature during the summer extreme heat events of the early twenty-first century in the Beijing–Tianjin–Hebei metropolitan area. This study uses the Weather Research Forecasting model with a single urban canopy model and the newest actual urban cover datasets. The results show that urban land use characteristics that have evolved over the past ~20 years in the Beijing–Tianjin–Hebei metropolitan area have had a significant impact on the extreme temperatures occurring during extreme heat events. Simulations show that new urban development has caused an intensification and expansion of the areas experiencing extreme heat waves with an average increase in temperature of approximately 0.60 °C. This change is most obvious at night with an increase up to 0.95 °C, for which the total contribution of anthropogenic heat is 34 %. We also simulate the effects of geo-engineering strategies increasing the albedo of urban roofs, an effective way of reducing urban heat island, which can reduce the urban mean temperature by approximately 0.51 °C and counter approximately 80 % of the heat wave results from urban sprawl during the last 20 years. 相似文献
13.
城市(热力、动力、人类活动等)效应对城市及周边地区强降水有着重要的影响。由于涉及到多方面因素,在数值模式中合理描述城市效应仍然存在许多困难。采用Nudging地面加密观测间接引入城市效应(Nudg)和使用城市冠层模式直接引入城市效应(Urba)两种方式模拟了2017年5月7日发生在广东广州的一次极端降水过程。结果表明Nudging地面加密观测能够有效地在数值模式中引入城市效应,从而合理地再现出城市热岛及其触发的对流和强降水的时空演变,而使用城市冠层模式未能够模拟出城市热岛及其触发的对流和降水。具体而言,Nudg能够维持城市的热岛,在城市热岛的下风方最先触发了对流,对流快速发展并稳定维持,从而在广州城市下风(西北)方形成了强降水。然而,Urba试验中城市热岛迅速减弱消亡,从而未能在城市下风方触发出对流,导致降水模拟的失败;尽管后期在城市下风方边缘及北部山区有零星的雷达回波,但均未能够发展形成组织化的对流单体或系统。对本次强降水事件对流的触发而言,城市热岛的加热作用较城市的摩擦辐合更重要。提出的Nudging地面加密观测间接地引入城市效应的方法可用于与城市下垫面相关的各类天气事件的模拟研究。 相似文献
14.
为解决城市边界层中大气O3浓度的预报问题，选用一种简明有效的光化学反应方案建立光化学模式, 并与大气平流扩散的箱格预报模型进行了嵌套，从而将大气化学过程引入到城市空气污染数值预报系统 (CAPPS) 中。同时，根据实际需要研究了VOC (Volatile Organic Compounds) 浓度及NOx源排放量等参数缺测时，根据前期监测浓度采用遗传算法反演未知参数的具体方法。利用2001年9月8~17日在北京舞蹈学院监测的O3、NOx资料及相应的气象数据，用改进后的CAPPS模式进行了单箱预报试验。预报试验结果表明，嵌套后的模式对O3浓度的变化具备一定的预报能力。 相似文献
15.
Modeling the relative roles of the foehn wind and urban expansion in the 2002 Beijing heat wave and possible mitigation by high reflective roofs 总被引：1，自引：0，他引：1
Rapid urbanization has intensified summer heat waves in recent decades in Beijing, China. In this study, effectiveness of applying high-reflectance roofs on mitigating the warming effects caused by urban expansion and foehn wind was simulated for a record-breaking heat wave occurred in Beijing during July 13–15, 2002. Simulation experiments were performed using the Weather Research and Forecast (WRF version 3.0) model coupled with an urban canopy model. The modeled diurnal air temperatures were compared well with station observations in the city and the wind convergence caused by urban heat island (UHI) effect could be simulated clearly. By increasing urban roof albedo, the simulated UHI effect was reduced due to decreased net radiation, and the simulated wind convergence in the urban area was weakened. Using WRF3.0 model, the warming effects caused by urban expansion and foehn wind were quantified separately, and were compared with the cooling effect due to the increased roof albedo. Results illustrated that the foehn warming effect under the northwesterly wind contributed greatly to this heat wave event in Beijing, while contribution from urban expansion accompanied by anthropogenic heating was secondary, and was mostly evident at night. Increasing roof albedo could reduce air temperature both in the day and at night, and could more than offset the urban expansion effect. The combined warming caused by the urban expansion and the foehn wind could be potentially offset with high-reflectance roofs by 58.8 % or cooled by 1.4 °C in the early afternoon on July 14, 2002, the hottest day during the heat wave. 相似文献
16.
Contrasting characteristics of the surface energy balance between the urban and rural areas of Beijing 总被引：1，自引：0，他引：1
Linlin Wang Zhiqiu Gao Shiguang Miao Xiaofeng Guo Ting Sun Maofeng Liu Dan Li 《大气科学进展》2015,32(4):505-514
A direct comparison of urban and rural surface energy balances, as well as a variety of other variables including incoming shortwave/longwave radiation and aerosol optical depth, is conducted for the Beijing metropolitan area. The results indicate that, overall, the urban area receives a smaller amount of incoming shortwave radiation but a larger amount of incoming longwave radiation. However, comparisons in the aerosol optical depth and cloud fraction at the two locations suggest that neither aerosol optical depth nor cloud fraction alone can explain the difference in the incoming shortwave radiation. The urban–rural differences in the incoming longwave radiation are unlikely to be caused by the presence of more abundant greenhouse gases over the urban area, as suggested by some previous studies, given that water vapor is the most dominant greenhouse gas and precipitable water is found to be less in urban areas. The higher incoming longwave radiation observed over the urban area is mostly likely due to the higher temperatures of the ambient air. The urban area is also found to always produce higher sensible heat fluxes and lower latent heat fluxes in the growing season. Furthermore, the urban area is associated with a larger amount of available energy(the sum of sensible and latent heat fluxes) than the rural area, except in May and October when evapotranspiration in the rural area significantly exceeds that in the urban area. This study provides observational evidence of urban–rural contrasts in relevant energy-balance components that plausibly arise from urban–rural differences in atmospheric and land-surface conditions. 相似文献
17.
Urban surface modeling and the meso-scale impact of cities 总被引：4，自引：0，他引：4
V. Masson 《Theoretical and Applied Climatology》2006,84(1-3):35-45
Summary New developments of the international community in modeling the urban canopy surface energy balance are presented and classified
into five main categories: (i) models statistically fit to observations, (ii) and (iii) modified vegetation schemes with or
without drag terms in the canopy, and (iv) and (v), new urban canopy schemes, that present both horizontal and vertical surfaces,
again with or without a drag approach. The advantages and disadvantages of each type of model are explained. In general, the
more the physics are correctly simulated, the more complex are the urban phenomenon that can be addressed, on the other hand
however, the more consuming of computer-time and difficult to couple with atmospheric models the scheme becomes.
Present use of these new models in meso-scale atmospheric models show their ability to reproduce the phenomenon of the urban
heat island (UHI) and some of its consequences – urban breezes, storm initiation, interaction with sea-breeze. Their use opens
up new perspectives, for example in the mitigation of the UHI, or assessment of the role of air-conditioning systems or the
impact of urban dynamics on air pollution.
However, there is need to validate further the different urban models available. In particular it is necessary to compare
model output with urban surface energy balance measurements. An intercomparison exercise involving these urban schemes is
suggested as an efficient way to assess and improve these models. 相似文献
18.
在当前中国城市化进程愈演愈烈的情形下,城市热岛冷却效应的研究对于确立城市生态环境可持续化发展的正确途径等有重要意义。采用离线城市冠层模型分析了城市冠层中街区形态和屋顶材料的变化对辐射热量、表面温度及冠层内气温的影响。研究发现:建筑物高度、宽度以及街道宽度等参数的改变对冠层各表面温度的影响较大,当街道宽度增加3 m时,地面温度升高约3.5 K。但是街道宽度增加,多重反射导致的辐射截陷效应减弱,墙面上更多的热量释放出去,各墙面温度降低约1.5 K;冠层气温先增加,日出后降低约0.4 K。屋顶材料的改变对辐射及热通量和表面温度也有较大影响,与灰色水泥屋顶相比,采用高反照率白色涂料冷却屋顶后,屋顶净辐射热量损失约380 W m-2,屋顶表面温度降低约10 K。冠层内街区形态和屋顶材料对城市辐射热环境产生直接的影响。 相似文献
19.
利用耦合单层城市冠层模型的中尺度数值模式WRF/UCM,选取8组不同反照率和绿化比例的屋顶冷却方案进行敏感性试验,模拟研究不同冷却屋顶方案对长三角城市群2013年夏季城市热环境的影响,并分析其影响机制。结果表明：不同冷却屋顶方案对城市群热环境的缓解效果与屋顶参数之间呈很强的线性关系。高温热浪天气下,HR4（反照率为1.0）和GR4（屋顶绿化率为100%）方案的制冷度日数分别降低了14.7%和10.9%,节约的能源比普通夏日更多。同时,高温热浪天气会增强热岛强度,高反照率屋顶方案在白天对热岛起到更有效的缓解,热浪天气下日平均热岛强度最大可降低1.36℃。相同方案下,在高温热浪天气下的缓解效果均胜于普通夏日,平均而言,高反照率屋顶和屋顶绿化的降温效果分别增大38.5%和34.9%,增湿效果分别增大29.5%和21.9%,这主要是由于在高温热浪天气下,高反照率屋顶方案能够减少更多的净辐射通量,屋顶绿化方案能够释放更多的潜热通量。此外,城市格点密集区域的降温效果优于分散的城市区域,处于城市群中的常州区域较单独的杭州区域的降温幅度平均高32%。 相似文献
20.
MM5模式中城市冠层参数化方案的设计及其数值试验 总被引：15，自引：5，他引：15
文中在综合国外一些较先进的中尺度模式城市作用参数化方案的基础上 ,从城市下垫面结构对城市边界层大气作用的物理机制及实际应用两方面出发 ,对城市下垫面结构和人为活动等因素对边界层结构的影响及中尺度模式中城市化作用的合理体现等问题进行了较全面的考虑 ,改进和设计出能够较全面、细致地描述城市结构对大气边界层动力、热力结构的影响 ,且适合中尺度模式结构特点的城市冠层参数化方案 (UCP) ,并实现了其与MM5模式的耦合。进行了耦合后的UCP方案及采用原城市作用方案的MM5模式对BECAPEX试验期间北京地区气象条件多重嵌套细尺度进行了模拟试验 ,并与观测结果对比 ,结果表明 :相比于MM 5模式中原有表示城市作用的参数化方案来讲 ,设计的UCP方案在很大程度上提高了MM 5模式对城市边界层热力和动力结构的模拟能力。 相似文献