共查询到20条相似文献，搜索用时 250 毫秒
1.
Sunit K. Addy E. William Behrens Trent R. Haines Donald J. Shirley J. Lamar Worzel 《Marine Georesources & Geotechnology》2013,31(1):27-49
Abstract Eight types of reflections are interpreted from 3,800 km of 3.5 kHz profiles taken over a 25,000 km2 area of the upper continental slope and shelf in the northeastern Gulf of Mexico off Panama City, Florida. The corresponding sediments in five of the reflection types were sampled in 77 piston cores from which data were obtained on in situ acoustic velocities (V), bulk densities (gr), sediment texture (mean grain size = Mz), CaCO3 content (C), sedimentary structures, and gross sediment composition. A distinct bottom echo with numerous subbottom reflectors (Type I) is observed in deeper areas where terrigenous clay or lutite (Mgi = 9.9 to, gr = 1.4 g/cc, porosity (P) = 74 percent, C = 28 percent, and V (upper 2 m) = 1,435 m/s) predominates. Type I reflection grades upslope into Type IV, which shows a distinct bottom echo with fewer subbottom reflectors, and the corresponding sediment is a foraminiferal silty clay (mz = 9.4 to, gr = 1.43 g/cc, P = 73 percent, V = 1,447 m/s, and C = 37 percent). The uppermost slope gives indistinct, semiprolonged bottom echoes with faint subbottoms (Type VI) where calcareous silt (Mz = 6.6 to, gr = 1.57 g/cc, P = 65 percent, C = 70 percent, and V = 1,482 m/s) is the main sediment type. The shelf sediments (gr = 1.66 g/cc, P = 58 percent, V = sl1,530 m/ s), varying from coarse silt (Mz = 5.3 to) to very coarse sand (Mz = ‐0.3 to) and 25 to 100 percent carbonate, show indistinct, semiprolonged bottom echoes with intermittent or mushy subbottoms (Type VII). Prolonged echoes with no subbottoms (Type VIII) are observed in areas where algal sands of variable grain size (Mz ‐ ‐0.9 to 2.7 to, gr = 1.66 g/cc, P = 59 percent, V = 1,530 to 1,690 m/s) occur. The major trends in reflection types (loss in depth of penetration, loss in number of reflectors, and prolongation of initial bottom reflections) follow gradients of sedimentary and physical properties of the sediments, which are increases in mean grain size, bulk density, in situ acoustic velocity, CaCO3 content, and decrease in porosity. Increases in the reflection coefficient and attenuation of the sound energy in the shelf sediments are probably important factors in the observed decrease in the depth of penetration of the sound energy in the shelf sediments. 相似文献
2.
P. Dewangan T. RamprasadM.V. Ramana A. MazumdarM. Desa F.K. Badesab 《Marine and Petroleum Geology》2010
Increased oil and gas exploration activity has led to a detailed investigation of the continental shelf and adjacent slope regions of Mahanadi, Krishna–Godavari (KG) and Cauvery basins, which are promising petroliferous basins along the eastern continental margin of India. In this paper, we analyze the high resolution sparker, subbottom profiler and multibeam data in KG offshore basin to understand the shallow structures and shallow deposits for gas hydrate exploration. We identified and mapped prominent positive topographic features in the bathymetry data. These mounds show fluid/gas migration features such as acoustic voids, acoustic chimneys, and acoustic turbid layers. It is interesting to note that drilling/coring onboard JOIDES in the vicinity of the mounds show the presence of thick accumulation of subsurface gas hydrate. Further, geological and geochemical study of long sediment cores collected onboard Marion Dufresne in the vicinity of the mounds and sedimentary ridges shows the imprints of paleo-expulsion of methane and sulfidic fluid from the seafloor. 相似文献
3.
Abstract The improvement of sensors such as various high‐resolution seismic and navigational systems and side‐scan sonar, of offshore shallow‐water drilling techniques, and of laboratory analyses has allowed the marine geologist to make more accurate identifications and maps of the distribution of numerous types of marine sediment instabilities, as well as to determine the mechanisms responsible for their occurrence. A large number of data on the continental shelf and upper continental slope off the modern delta of the Mississippi river have been compiled; these data will be used to document the major types of slope instabilities. The continental shelf and slope off the modern Mississippi river delta display various types of sediment instability. High rates of sedimentation (up to 80 m per century), weak, high‐water‐content clays, and differential weighting of clay sediments characterize this region. The major types of sediment instabilities that have been documented include (a) Peripheral slumping, with dimensions of slumps ranging from 200 to 1000 m; slumping often occurring in multiple stairstep arrangement; and downslope movement as high as 700 m per year. (b) Shallow diapiric intrusions, ranging in size from a few hundred meters to 2 km in diameter; vertical displacement ranging from 200 to 500 m; rate of sediment movement several meters per year; and intrusions caused by differential sediment loading, (c) Radial graben (tensional faulting), with widths from 50 to 500 m and lengths of several kilometers; both vertical and downslope lateral movements occurring; and downslope movements of surface material as much as 5 m per year common. (d) Circular collapse depressions, with diameters of depressions ranging from 50 to 500 m; topography of depression interiors, hummocky; and depressions possibly caused by dewatering or degassing of sediments under the influence of cyclic wave loading. (e) Surface mudflows, thick (often more than 35 m) masses of surface sediment flowage; often bounded by abrupt seaward slope; mudflows often extending laterally for distances in excess of 100 km; movement sporadic and lobate and rates of movement as much as several hundred meters per year; often being associated with extremely hummocky topography and mud volcanoes; and with extrusion of sediments the possible mechanism. (f) Shelf‐edge arcuate slumps, with large arcuate slumps displacing several hundred meters of sediment; slippage planes are commonly concave. Finally, (g) Various deep‐seated faults, with faults extending from deep horizons up to modern sediment surface; commonly being associated with abrupt scarps on the seafloor; numerous contemporaneous faults; and local slumping associated with fault scarps. 相似文献
4.
Acoustic environment and physico‐mechanical properties of the shelf seabed off the pearl river mouth
Abstract The vast shallow sea off the Pearl River mouth in the northern South China Sea is an important prospecting area for offshore oil development. In recent years, the authors have investigated acoustic and geotechnical characteristics of marine sediments in this area. An intercalated layer of low sound velocity and low compressive strength has been found within the seabed, in which the median diameter of sediment grains is fine and the sound velocity is 100–200 m/s lower than that of the overlying and underlying layers. The minimum unconfined compressive strength of this layer is 0.075 kg/cm2, which is lower than that of the over‐ and underlying layers by an order of magnitude. Such an intercalation often constitutes a threat to the stability of shallow foundation soil. In case of overloading, the layer may be weakened, and seafloor sliding between different sediment layers may occur. The regional distribution of these kinds of weak intercalations of low sound velocity may be traced by a subbottom profiler and by means of sediment acoustical investigations. Correlation between the gray level of a layer on subbottom profile records and physical properties of the layer (including sound velocity and reflectivity) suggests that the layer of sufficient bearing capacity must be searched by means of sediment acoustics at least to the depth of a high‐velocity substratum of stronger reflection. 相似文献
5.
原位测量技术在黄海沉积声学调查中的应用 总被引：8，自引：3，他引：8
介绍了最新研制的基于液压驱动贯入的自容式海底沉积声学原位测量系统及其在南黄海中部海底沉积声学调查中的应用。该系统可以实现对海底沉积物声速和声衰减系数进行原位测量,通过液压驱动装置将四根声学探杆匀速贯入到海底沉积物中,减少了对沉积物的扰动,可按照预设的工作参数在海底全自动工作,无需甲板上人员实时控制,采集的声波信号自容式存储于存储单元。系统工作水深为500 m,测量深度为1 m,测量频率为30 kHz,采样频率为10 MHz。使用该系统在南黄海中部获得了40个站位不同类型沉积物的声学特性原位测量数据,并使用CTD剖面仪对该系统声速测量进行了标定,相对误差均小于0.5%,表明该系统测量数据准确、可靠。 相似文献
6.
分析研究了南海北部大陆架西南缘的海南岛东南外海海底沉积物声学物理特性,在多个航次中进行了海底沉积层取样、海水CTD测量、浅地层及旁侧声呐扫测等工作.在实验室里对沉积物样品进行声学参数、沉积学基本参数、物理力学参数和14C年龄测试等分析.根据多尔特曼公式求解出弹性模量、体积弹性模量、压缩系数、切变模量、泊松比和拉梅常数等六项沉积物弹性参数.分析结果表明在该海区海底沉积物的压缩波速为1.474~1.700 m/s,在不同的海区内有高低声速两类性质的沉积物分布;沉积物的切变波速为150~600 m/s;沉积物在100 kHz的声衰减为35~260 dB/m;沉积物的密度为1.4~2.0 g/cm3;沉积物的孔隙度为42%~88%. 相似文献
7.
DAE CHOUL KIM GWANG HOON LEE YOUNG KYO SEO GIL YOUNG KIM SEOK YUN KIM JEONG CHANG KIM 《Marine Georesources & Geotechnology》2013,31(1-2):21-31
Shallow gas in the Korea Strait shelf mud (KSSM) off SE Korea, revealed by high-resolution subbottom profiles, is associated with acoustic blanking, acoustic turbidity, seepages with plumes in the water column, and seafloor depressions. The acoustic blanking, characterized by strong, consistent top reflection and wipeout below, is most dominant. The seaward edge of the acoustic blanking zone generally coincides with the 100-m water-depth contour, suggesting that the water depth (the pressure) may control the distribution of shallow gas. The acoustic turbidity, characterized by diffuse top reflection, is a dark smear, partially blanking the data below. The seepages with plumes, characterized by vertical smearing and disturbed seafloor, are seen only along the shallowest, landward edge of the acoustic blanking zone. This may suggest that the decreased gas solubility at shallow water depths, caused by the lowered pressure, increases the volume of free gas in the sediments, facilitating the gas escape. The seafloor depressions, interpreted as pockmarks, are accompanied by cone-shaped acoustic masking, which is probably the reflection from a narrow vent of gas. The gas-related acoustic anomalies appear to occur mostly in the upper, recent mud of the KSSM. Neither permeable beds nor faults, which can act as vertical migration pathways for deep thermogenic gas, are evident in the recent mud. We interpret that the bacterial degradation of organic matter in situ is the main source for the gas in the KSSM. The upwelling off SE Korea may be an important source for the increased organic matter in the area. 相似文献
8.
Dae Choul Kim Gwang Hoon Lee Young Kyo Seo Gil Young Kim Seok Yun Kim Jeong Chang Kim Soo Chul Park Roy Wilkens 《Marine Georesources & Geotechnology》2004,22(1):21-31
Shallow gas in the Korea Strait shelf mud (KSSM) off SE Korea, revealed by high-resolution subbottom profiles, is associated with acoustic blanking, acoustic turbidity, seepages with plumes in the water column, and seafloor depressions. The acoustic blanking, characterized by strong, consistent top reflection and wipeout below, is most dominant. The seaward edge of the acoustic blanking zone generally coincides with the 100-m water-depth contour, suggesting that the water depth (the pressure) may control the distribution of shallow gas. The acoustic turbidity, characterized by diffuse top reflection, is a dark smear, partially blanking the data below. The seepages with plumes, characterized by vertical smearing and disturbed seafloor, are seen only along the shallowest, landward edge of the acoustic blanking zone. This may suggest that the decreased gas solubility at shallow water depths, caused by the lowered pressure, increases the volume of free gas in the sediments, facilitating the gas escape. The seafloor depressions, interpreted as pockmarks, are accompanied by cone-shaped acoustic masking, which is probably the reflection from a narrow vent of gas. The gas-related acoustic anomalies appear to occur mostly in the upper, recent mud of the KSSM. Neither permeable beds nor faults, which can act as vertical migration pathways for deep thermogenic gas, are evident in the recent mud. We interpret that the bacterial degradation of organic matter in situ is the main source for the gas in the KSSM. The upwelling off SE Korea may be an important source for the increased organic matter in the area. 相似文献
9.
Acouso-physical properties of sea floor sediments in the southeast offshore sea area of Hainan Island on the northern continental shelf of the South China Sea are analyzed. In many cruises, conductivity-temperature-depth measurements of seawater, measurements of shallow stratum and side-scan sonar have been made. Acoustic parameters, basic sedimentary parameters, physical-mechanical parameters and 14C age, etc., have been measured. The sediment elastic parameters, including Young's modulus, bulk modulus, constrained modulus, rigidity modulus, Poisson's ratio, Lames constant, etc., have been calculated. Results show that the compression wave velocity of the seafloor sediment in the sea area ranges from 1474–1700 m/s, and there are high and low sound velocity sediment types in the different sea areas; the shear wave velocity is 150–600 m/s; at 100 kHz the sediment sound attenuation is 35–260 dB/m, the sediment density is 1.4–2.0 g/cm3; the sediment porosity is 42–88%. Sound field parameters and describing sound reciprocity between sea and seafloor are described. 相似文献
10.
Abstract Submarine faults and slides or slumps of Quaternary age are potential environmental hazards on the outer continental shelf (OCS) of the northern Gulf of Alaska. Most faults that approach or reach the seafloor cut strata that may be equivalent in age to the upper Yakataga Formation (Pliocene‐Pleistocene). Along several faults, the seafloor is vertically offset from 5 to 20 m. A few faults appear to cut Holocene sediments, but none of these shows displacement at the seafloor. Submarine slides or slumps have been found in two places in the OCS region: (1) seaward of the Malaspina Glacier and Icy Bay, an area of 1200 km2 with a slope of less than 0.5°, and (2) across the entire span of the Copper river prodelta, an area of 1730 km2, having a slope of about 0.5°. Seismic profiles across these areas show disrupted reflectors and irregular topography commonly associated with submarine slides or slumps. Potential slide or slump areas have been delineated in areas of thick sediment accumulation and relatively steep slopes. These areas include (1) Kayak Trough, (2) parts of Hinchinbrook Entrance and Sea Valley, (3) parts of the outer shelf and upper slope between Kayak Island and Yakutat Bay, and (4) Bering Trough. 相似文献
11.
Adrian F. Richards Harold D. Palmer Michael Perlow Jr. 《Marine Georesources & Geotechnology》2013,31(1):33-67
Abstract Sands and silty sands are the predominant surficial soils of continental shelves. Cohesive fine‐grained soils are typical off the mouths of large rivers, near bays and estuaries, and in basins located on the shelf. The stratigraphy of shelf soils is very poorly known for most engineering purposes, except in the vicinity of the Mississippi Delta. Vibratory coring is the most common method of sampling shelf sands to depths of about 13 m; greater soil depths are sampled by borings often using drilling and wireline sampling tools. Employment of self‐contained or wireline static cone penetrometers to obtain in situ measurements of sands has not been as common in the United States as in Europe. Dynamic piston corers are the most common samplers in cohesive soils, but rotary and hydraulically activated incremental corers are becoming available for marine use. Self‐contained or wireline vane shear devices and static cone penetrometers are used for the in situ testing of cohesive soils, and the latter device is also used for cohesionless soils. Dynamic cone penetrometers have been developed and have had limited experimental use at sea. In situ electrical resistivity and nuclear‐transmission and backscatter probes have been used in cohesive soils to obtain bulk‐density and water‐content measurements and for stratigraphic correlation. Acoustical properties of cohesive and cohesionless soils have been measured by in situ probes and have been estimated from results of geophysical surveys made on ships that are under way. Environmental hazards to the foundations of offshore structures include earthquakes, wave‐induced loading and scour, and burrowing animals. Reported bottom‐current velocities on the United States continental shelf appear to have maximums of about 0.5 m/s under fair‐weather conditions and greater than about 5 m/s under hurricane conditions. Cyclical loading of the seafloor induced by storm waves appears to be a major hazard to soil stability in some areas. A representative sample of the widely scattered engineering and scientific literature of continental shelf marine geotechnics and geotechnically related subjects has been made to aid marine geologists, geotechnologists, and other specialists. 相似文献
12.
The Magdalena Fan can be divided into: upper fan—1:60–1:110 gradients, channels with well-developed levees, generally several subbottom reflectors on 3.5-kHz records, and fine-grained sediments; middle fan—1:110–1:200 gradients, channels with very subdued levees, several to few subbottom reflectors on 3.5-kHz records, and chaotic and discontinuous reflections on multichannel seismic (MCS) records; lower fan—<1:250 gradients, small channels and relatively smooth seafloor, generally coarsegrained sediments, few or no subbottom reflectors on 3.5-kHz records, and flat continuous reflections on MCS records. In addition to the turbidity currents, slumping along the continental slope and elsewhere also influenced sedimentation in the fan. 相似文献
13.
Eleven seismic reflection profiles across Shirshov Ridge and the adjacent deep-water sedimentary basins (Komandorsky and Aleutian Basins) are presented to illustrate the sediment distribution in the western Bering Sea. A prominent seismic reflecting horizon, Reflector P (Middle—Late Miocene in age), is observed throughout both the Aleutian and Komandorsky Basins at an approximate subbottom depth of 1 km. This reflector is also present, in places, on the flanks and along the crest of Shirshov Ridge. The thickness of sediments beneath Reflector P is significantly different within the two abyssal basins. In the Aleutian Basin, the total subbottom depth to acoustic basement (basalt?) is about 4 km, while in the Komandorsky Basin the depth is about 2 km.Shirshov Ridge, a Cenozoic volcanic feature that separates the Aleutian and Komandorsky Basins, is an asymmetric bathymetric ridge characterized by thick sediments along its eastern flank and steep scarps on its western side. The southern portion of the ridge has more structural relief that includes several deep, sediment-filled basins along its summit.Velocity data from sonobuoy measurements indicate that acoustic basement in the Komandorsky Basin has an average compressional wave velocity of 5.90 km/sec. This value is considerably larger than the velocities measured for acoustic basement in the northwestern Aleutian Basin (about 5.00 km/sec) and in the central Aleutian Basin (5.40–5.57 km/sec). In the northwestern Aleutian Basin, the low-velocity acoustic basement may be volcaniclastic sediments or other indurated sediments that are overlying true basaltic basement. A refracting horizon with similar velocities (4.6–5.0 km/sec) as acoustic basement dips steeply beneath the Siberian continental margin, reaching a maximum subbottom depth of about 8 km. The thick welt of sediment at the base of the Siberian margin may be the result of sediment loading or tectonic depression prior to Late Cenozoic time. 相似文献
14.
A seabed 2-m-long cone penetrometer and coring system (Geotechnical Module) has been used at 17 stations in four transects on the Scotian Slope to characterise in situ shear strength and induced pore pressure on several different types of late Pleistocene and early Holocene failure. Study sites were selected using the SAR high-resolution deep-towed acoustic system equipped with a digital 160–190 kHz sidescan sonar and a 3.5 kHz subbottom profiler.
Several distinctive types of “geotechnical signature” were recognised from plots of cone resistance and induced pore pressure with depth in the sediment. Normally consolidated sediments show a progressive increase in cone resistance with depth (to about 75 kPa at 2 m subbottom). Holocene surficial muds show spectacular apparent overconsolidation, reaching a peak of 250 kPa at about 50 cm subbottom and then decreasing down to 1.5 m. This overconsolidation is associated with Zoophycos burrows. Late Pleistocene sediments exhumed by bedding plane slides show strong true overconsolidation consistent with the original depth of burial inferred from high-resolution seismic stratigraphy. Debris flows show only a slight shear stress gradient with depth (40–45 kPa over 0.5–1 m subbottom) with under-consolidation due to remoulding of sediment. 相似文献
15.
16.
Natural oil and gas seeps on the Black Sea floor 总被引：3，自引：0，他引：3
Migration of hydrocarbons to the seafloor in the Black Sea occurs via direct seepages, mud volcanoes, and development of fluidized sediment flows (e.g., diapers). Gas migration occurs on the shelf, continental slope, and abyssal plain. Gas hydrates are spatially related to gas accumulations and are present in shallow subsurface sediment layers. Their distribution is controlled by the activity of mud volcanoes. In regions of methane seepages, specific biogeochemical processes related to the activity of methane-oxidizing bacteria are evident. This activity results in the formation of diagenetic minerals (carbonates, sulfides, sulfates, phosphates and other minerals). 相似文献
17.
The Magdalena Fan can be divided into: upper fan—1:60–1:110 gradients, channels with well-developed levees, generally several
subbottom reflectors on 3.5-kHz records, and fine-grained sediments; middle fan—1:110–1:200 gradients, channels with very
subdued levees, several to few subbottom reflectors on 3.5-kHz records, and chaotic and discontinuous reflections on multichannel
seismic (MCS) records; lower fan—<1:250 gradients, small channels and relatively smooth seafloor, generally coarsegrained
sediments, few or no subbottom reflectors on 3.5-kHz records, and flat continuous reflections on MCS records. In addition
to the turbidity currents, slumping along the continental slope and elsewhere also influenced sedimentation in the fan.
Margin setting represents fan and/or source area 相似文献
18.
边缘海（黄、东海）沉积物可以提供水体中广泛的信息。Tessier和BCR方法被广泛的应用于沉积物中不同地球化学相的提取。为了选取适用于第四纪大陆架沉积物不同相态的提取方法，我们进行了两种方法提取典型单一矿物的有效性和选择性实验，并且对每种方法提取天然沉积物（沉积物标准品GSD-9和3个表层沉积物）进行了评价，分析了提取液中地球化学代表性元素Ca、Fe、Mn、Al、Ti。结果表明，两种方法提取不同的地球化学相均具有很好的选择性和有效性，并且给出了两种方法每个形态的提取试剂体积的最佳用量。考虑到实际研究中吸附-解吸过程的重要性，我们推荐Tessier方法，同时利用Tessier方法提取表层沉积物提供了生产力和沉积物环境方面的信息。以上结果进一步说明Tessier方法适用于中国大陆架沉积物元素形态的提取。 相似文献
19.
Keith A. Kvenvolden 《Marine and Petroleum Geology》1985,2(1):65-71
Two sites of the Deep Sea Drilling Project in contrasting geologic settings provide a basis for comparison of the geochemical conditions associated with marine gas hydrates in continental margin sediments. Site 533 is located at 3191 m water depth on a spit-like extension of the continental rise on a passive margin in the Atlantic Ocean. Site 568, at 2031 m water depth, is in upper slope sediment of an active accretionary margin in the Pacific Ocean. Both sites are characterized by high rates of sedimentation, and the organic carbon contents of these sediments generally exceed 0.5%. Anomalous seismic reflections that transgress sedimentary structures and parallel the seafloor, suggested the presence of gas hydrates at both sites, and, during coring, small samples of gas hydrate were recovered at subbottom depths of 238m (Site 533) and 404 m (Site 568). The principal gaseous components of the gas hydrates wer methane, ethane, and CO2. Residual methane in sediments at both sites usually exceeded 10 mll?1 of wet sediment. Carbon isotopic compositions of methane, CO2, and ΣCO2 followed parallel trends with depth, suggesting that methane formed mainly as a result of biological reduction of oxidized carbon. Salinity of pore waters decreased with depth, a likely result of gas hydrate formation. These geochemical characteristics define some of the conditions associated with the occurrence of gas hydrates formed by in situ processes in continental margin sediments. 相似文献
20.
Miller J.H. Bartek L.R. Potty G.R. Dajun Tang Jungyul Na Yiquan Qi 《Oceanic Engineering, IEEE Journal of》2004,29(4):940-951
This paper describes measurements of sediments during the 2000-2001 Asian Seas International Acoustic Experiment in the East China Sea. A number of techniques were used to infer properties of these sediments, including gravity and piston cores, subbottom profiling using a water gun, long-range sediment tomography, and in situ measurement of conductivity. Historical data from echosounder records and cores showed two regions of surficial sediments in the experimental area: a silty area to the west and a sandy area to the east. The tomography, cores, and water-gun measurements confirm the two surficial sediment regions seen in the historical data and also indicate that the subbottom structure at the experimental site consists of a thin (0-3 m thick) layer of sandy sediment directly beneath the sea floor. Below this layer, there is an extensive package of sediment with relatively uniform acoustic attributes. Core analysis shows that the surface sediment layer varies in compressional wave speed from a low near 1600 m/s in the west side of the experiment area to 1660 m/s in the east side of the experiment area. Long-range sediment tomography inversions show a similar spatial variation in the surface layer properties. In addition, the layer thickness as determined from tomography is consistent with the estimates from subbottom profiling. 相似文献