首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到17条相似文献,搜索用时 125 毫秒
1.
利用地面多基站RTK测量结果和精密单点定位(PPP)测量结果,分析了机载条件下PPP定位、测速性能指标.实验结果表明:机载GPS精密单点定位绝对定位精度在位置、速度上可分别达到0.182 3m和0.024 6m/s,相对定位精度在位置、速度上可分别达到0.1450m和0.024 9m/s.  相似文献   

2.
针对传统模式下,单系统实时动态精密单点定位精度不高、受环境影响严重等缺点,研究了双系统实时动态精密单点定位的方法,基于非差无电离层组合载波和伪距观测量,依据拓展Kalman滤波进行参数估计,从多种情况进行了实时动态PPP的实验。实测数据解算实验表明,双系统定位较单系统有明显改善,其U、N、E方向收敛后RMS分别为0.224m、0.062m、0.102m,分别较单系统改善了42.9%、26.2%、69.6%,能够满足海上实时动态的厘米至分米级的定位需求。  相似文献   

3.
基于远海测量试验,利用精密单点定位(PPP)技术和单站差分技术进行事后和实时定位,分别利用单BDS、GPS和BDS/GPS组合进行定位试验,对定位精度和算法可靠性进行分析。研究表明单站差分技术在海上中短基线(≤150 km)的定位中相比PPP技术具有更高的精度和技术可靠性,另外相比GPS,BDS更适合国内近海的导航定位作业,双频观测条件下能实现亚分米级的定位精度。该研究对海上定位理论和BDS的推广应用具有借鉴意义。  相似文献   

4.
探讨了组合多系统的精密单点定位(PPP),通过MGEX实测数据进行多系统PPP解算,分析了不同系统组合PPP定位精度和收敛速度,以及多系统组合对GPS模糊度首次固定时间的影响。实验结果表明,在静态和仿动态条件下,组合系统PPP的收敛速度和短时间定位精度明显优于单系统PPP,同时多系统组合PPP能够加快浮点模糊度收敛,缩短GPS PPP模糊度的首次固定时间。  相似文献   

5.
刘辉  何昆 《海洋测绘》2019,39(1):7-10
目前IGS共提供6类精度和时效性不同的精密星历产品,为了验证不同精度和时效性的IGS精密星历产品在海洋测绘中的适用情况,使用6类不同的IGS精密星历产品,分别对固定点观测数据和海上浮动点观测数据进行精密单点定位解算,并对解算结果分别进行比对分析和统计。固定点比对结果表明,IGS和IGR精密星历精密单点定位解算在平面位置方向均能达到平均8厘米的外符合精度,IGU00至IGU18精密单点定位解算精度稍差,平面外符合精度在10~13cm,且精度随着发布时间的推迟而提高;PPP潮位的解算结果表明,从IGS至IGU18,高程方向的解算精度相当,和固定潮位站的数据相比,均方根差在16~18cm。  相似文献   

6.
首先阐述了水深测量的两种作业模式:传统人工验潮水深测量和GPS无验潮水深测量,对两种作业方式作了简单的比较。简要介绍了GPS精密单点定位(PPP)的基本原理,给出了GPS无验潮水深测量数学模型。然后,针对传统水深测量作业模式的弊端,提出采用GPS精密单点定位技术进行无验潮水深测量作业,并从静态和动态定位两个方面验证了PPP技术进行无验潮水深测量作业的可行性。  相似文献   

7.
采用自适应选权滤波法,对低动态精密单点定位的解算方法进行研究,并编写了精密单点定位程序。通过合理选择自适应因子参数,对船载动态GPS测量数据进行了事后精密单点定位处理。结果表明:相对于经典卡尔曼滤波方法,采用自适应选权滤波法可大大提高低动态精密单点定位解的精度,X、Y、Z三个方向的RMS分别提高了79.9%、69.7%和92.0%。  相似文献   

8.
研究了单频GPS精密单点定位的算法,包括单频精密单点定位的回归方程及卡尔曼滤波用于单频精密单点定位,探讨卡尔曼滤波的观测方程和状态方程,给出了状态转移矩阵及系统噪声矩阵.通过算例验证了在1s采样率的情况下,定位达到了分米级的精度.  相似文献   

9.
首先介绍了北斗伪距单点定位、伪距差分定位的基本原理和数学模型,然后根据自编程序,利用同济大学TJA站8天的数据进行计算及分析。结果显示:北斗伪距单点定位的精度平面方向上达到3.5m以内,高程方向优于8m,满足普通导航定位的需求。北斗差分定位的精度较伪距单点定位精度有了较大提高,其精度平面上达到1m以内,高程方向优于1.5m,能满足较高精度的需求。  相似文献   

10.
结合海上科研工程实践,对GPS精密单点定位模型及数据处理方法进行研究,并采取陆上静动态定位和海上动态定位试验进行了精密单点定位精度统计和分析。结果表明:在超出常规差分定位基线长度限制的广阔海域,采用精密单点定位技术可实现亚米级实时动态定位,为海上高精度实时动态定位应用提供了技术依据。  相似文献   

11.
为实现多频多模GNSS浮标在远距离海洋潮汐测量中的应用,基于精密单点定位(precision pointing positioning,PPP)数据处理策略获取潮位信息,以压力验潮仪为参考,对GNSS浮标测量海面高进行经验模态分解(empirical mode decomposition,EMD),滤去高频波浪和噪声,获取潮位进行精度分析。结果表明:多系统可以提高PPP解算潮位精度。GPS/GLONASS双系统和GPS/GLONASS/Bei Dou三系统PPP提取潮位与验潮仪潮位差值的最大误差均小于18cm,RMSE小于6. 5cm。因此,多系统PPP解算GNSS浮标海面高可以实现远离海岸的潮位获取与监测,能够提高海上潮位测量的效率。  相似文献   

12.
基于动态精密单点定位(PPP)技术,借助研制的PPP软件,采用IGR、IGU等快速星历和钟差产品,进行了海上船载PPP验潮试验,并对其精度进行了分析。结果表明:与传统RTK验潮技术相比,海上PPP验潮的精度优于0.1m,能够满足海上OBC地震勘探等工作对潮汐数据的精度要求;基于IGU星历的PPP验潮方法的时延较短,更加符合海洋潮汐数据的时效性需求。  相似文献   

13.
Comparing to single BeiDou Navigation Satellite System (BDS) Precise Point Positioning (PPP), a method which can more quicklydetermine the ambiguity parameters of BDS through applying the contribution of GPS observations is proposed and analyzed in this article. The numerical examples and analysis show that the ionosphere-free ambiguities of BDS satellites can be determined and converged more quickly because of the contribution of GPS observations. The average improvement of the convergent speed of positioning is 18.5% and its positioning accuracy in N, E, and U components are improved by 29.4, 30.3, and 34.4%, respectively, with the contribution of the a priori coordinates obtained from GPS observations. This method is useful for single BDS system positioning when there is a priori information provided by GPS or other sensors which be replaced by and can be applied at the beginning of the computation.  相似文献   

14.
分别采用非差无电离层组合模型与非差非组合模型进行批量静态定位解算,对比两者的定位精度以及ZPD估计精度。设计并实现两种模型的并行解算方法,提高非差模型的计算效率。大网数据实验结果表明,两种模型定位精度基本一致,非差非组合ENU的3个方向平均偏差为(4.2,2.8,6.6)mm,组合模型的平均偏差为(4.0,2.8,6.3)mm,但非差非组合模型的解算更加耗时,约是组合模型计算时间的1.4倍。多核环境下,两种模型的并行解算效率均比传统串行模型得到了提高。结果表明,双核并行和四核并行的计算效率比单核串行计算均分别提高了40%和60%以上。  相似文献   

15.
The accuracy of GPS/Acoustic positioning is crucial for monitoring seafloor crustal deformation. However, the slant range residual is currently the only indicator used to evaluate the precision of positioning seafloor transponders. This study employs a unique Seafloor Acoustic Transponder System (SATS) to evaluate the accuracy of GPS/Acoustic seafloor positioning. The SATS has three transponders and an attitude sensor in a single unit, which provides true lengths of transponder baselines and true attitude of the SATS to ensure assessment reliability and validity. The proposed approach was tested through a GPS/Acoustic experiment, in which an off-the-shelf acoustic system was used to collect range measurements. Using GPS/Acoustic geodetic observations, the positions of three transponders on the SATS were estimated by an optimization technique combined with ray-tracing calculations. The accuracy of the GPS/Acoustic seafloor positioning is assessed by comparing the true baselines and attitude with the results derived from the position estimates of the three transponders. A sensitivity analysis is conducted to investigate the robustness of the GPS/Acoustic positioning results to changes of sound speed. Experimental results demonstrate that the use of the SATS can help to assess the validity of the GPS and acoustic travel time measurements in the GPS/Acoustic seafloor positioning.  相似文献   

16.
对中国沿海RBN-DGPS系统升级意见的商榷   总被引:1,自引:1,他引:0  
刘基余 《海洋测绘》2008,28(5):9-12
依据GPS现代化的新近发展,论述了用包括4个民用测距码的三个GPS导航定位信号,船舰只需用一台GPS信号接收机就可以实现精度为±3.66m的在航三维定位测量;同时阐述了用中国的CNSS系统、俄罗斯的GLONAASS系统和欧盟的Galileo系统的三个民用导航定位信号作定位测量,能够用其无电离层效应影响的站星距离,解算出精度为±1m左右的三维位置;而不必要花巨资去升级“中国沿海RBN—DGPS系统”。  相似文献   

17.
Y. Gao 《Marine Geodesy》2013,36(4):279-288
Global positioning system (GPS) has found applications in various areas including marine geodesy. GPS positioning accuracy, however, is greatly degraded by GPS ephemeris and clock errors, particularly errors due to Selective Availability (SA). Thus, it is crucial to use precise ephemeris and clock corrections for users who require high position accuracy. Presently, precise ephemeris and clock corrections are available only in post‐mission. This paper investigates the generation of precise real‐time ephemeris and clock corrections and the positioning accuracy using them. In this research, precise real‐time ephemeris is generated from accurate dynamic orbit prediction and clock corrections are calculated using instantaneous GPS measurements. Numerical analysis using data from an actual GPS tracking network is performed that indicates use of precise ephemeris and clock corrections can improve the positioning accuracy to the one meter level. This accuracy is attainable in real‐time as the precise real‐time ephemeris and clock corrections become available in the future.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号