首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 31 毫秒
1.
The Yuanba gas field in the Permian Changxing Formation (P2c), which exhibits wide variations in its hydrogen sulfide (H2S) concentration (1.20–12.16%), is a typical sour gas field in the northern Sichuan Basin. The sulfur-rich reservoir's solid bitumen (atomic S/C ratios are 0.032–0.142), and late calcite cement δ13C values, which are smaller than the δ13C values of the host dolostone, indicate that the H2S originated from thermal sulfate reduction (TSR) and oil was involved in TSR. The gas souring index (GSI) of P2c's gases is generally lower than 0.1. The ethane δ13C values increase as the GSI increases, although no obvious increase was observed in the methane δ13C values. The calcite cements' δ13C values (−15.36 to +4.56‰) in dolostone are heavier than the typical reported values, which implies that only limited heavy hydrocarbon gases were involved in TSR. No anhydrites developed in P2c's reservoirs, and dissolved sulfate anions (SO42−) were mainly enriched during dolomitization. Insufficient dissolved SO42− most likely caused the lower H2S concentrations in the Permian to Triassic reservoirs in the northeastern Sichuan Basin compared to the Permian Khuff Formation in Saudi Arabia and the Jurassic Smackover Formation in Mississippi. Except for the SO42− in residual water in paleo-oil zones, SO42− from bottom water may also be involved in TSR; therefore, oil reservoirs with bottom water have more SO42− and can produce more H2S than pure oil reservoirs. This phenomenon may be the main cause of the great difference in the H2S concentrations between reservoirs, while gravitational differentiation during late uplift most likely creates differences in H2S concentrations in a single reservoir. Carbon dioxide (CO2), which has a relatively heavy δ13C value (−3.9 to −0.3‰), may be the combined result of TSR, the balance between CO2 and inorganic fluid systems, and carbonate decomposition.  相似文献   

2.
Gas occurrences consisting of carbon dioxide (CO2), hydrogen sulfide (H2S), and hydrocarbon (HC) gases and oil within the Dodan Field in southeastern Turkey are located in Cretaceous carbonate reservoir rocks in the Garzan and Mardin Formations. The aim of this study was to determine gas composition and to define the origin of gases in Dodan Field. For this purpose, gas samples were analyzed for their molecular and isotopic composition. The isotopic composition of CO2, with values of −1.5‰ and −2.8‰, suggested abiogenic origin from limestone. δ34S values of H2S ranged from +11.9 to +13.4‰. H2S is most likely formed from thermochemical sulfate reduction (TSR) and bacterial sulfate reduction (BSR) within the Bakuk Formation. The Bakuk Formation is composed of a dolomite dominated carbonate succession also containing anhydrite. TSR may occur within an evaporitic environment at temperatures of approximately 120–145 °C. Basin modeling revealed that these temperatures were reached within the Bakuk Formation at 10 Ma. Furthermore, sulfate reducing bacteria were found in oil–water phase samples from Dodan Field. As a result, the H2S in Dodan Field can be considered to have formed by BSR and TSR.As indicated by their isotopic composition, HC gases are of thermogenic origin and were generated within the Upper Permian Kas and Gomaniibrik Formations. As indicated by the heavier isotopic composition of methane and ethane, HC gases were later altered by TSR. Based on our results, the Dodan gas field may have formed as a result of the interaction of the following processes during the last 7–8 Ma: 1) thermogenic gas generation in Permian source rocks, 2) the formation of thrust faults, 3) the lateral-up dip migration of HC-gases due to thrust faults from the Kas Formation into the Bakuk Formation, 4) the formation of H2S and CO2 by TSR within the Bakuk Formation, 5) the vertical migration of gases into reservoirs through the thrust fault, and 6) lateral-up dip migration within reservoir rocks toward the Dodan structure.  相似文献   

3.
To study the sedimentary environment of the Lower Cambrian organic-rich shales and isotopic geochemical characteristics of the residual shale gas, 20 black shale samples from the Niutitang Formation were collected from the Youyang section, located in southeastern Chongqing, China. A combination of geochemical, mineralogical, and trace element studies has been performed on the shale samples from the Lower Cambrian Niutitang Formation, and the results were used to determine the paleoceanic sedimentary environment of this organic-rich shale. The relationships between total organic carbon (TOC) and total sulfur (TS) content, carbon isotope value (δ13Corg), trace element enrichment, and mineral composition suggest that the high-TOC Niutitang shale was deposited in an anoxic environment and that the organic matter was well preserved after burial. Stable carbon isotopes and biomarkers both indicate that the organic matter in the Niutitang black shales was mainly derived from both lower aquatic organisms and algaes and belong to type I kerogen. The oil-prone Niutitang black shales have limited residual hydrocarbons, with low values of S2, IH, and bitumen A. The carbon isotopic distribution of the residual gas indicate that the shale gas stored in the Niutitang black shale was mostly generated from the cracking of residual bitumen and wet gas during a stage of significantly high maturity. One of the more significant observations in this work involves the carbon isotope compositions of the residual gas (C1, C2, and C3) released by rock crushing. A conventional δ13C1–δ13C2 trend was observed, and most δ13C2 values of the residual gases are heavier than those of the organic matter (OM) in the corresponding samples, indicating the splitting of ethane bonds and the release of smaller molecules, leading to 13C enrichment in the residual ethane.  相似文献   

4.
This article reviews the abnormal characteristics of shale gases (natural gases produced from organic-rich shales) and discusses the cause of the anomalies and mechanisms for gas enrichment and depletion in high-maturity organic-rich shales. The reported shale gas geochemical anomalies include rollover of iso-alkane/normal alkane ratios, rollover of ethane and propane isotopic compositions, abnormally light ethane and propane δ13C values as well as isotope reversals among methane, ethane and propane. These anomalies reflect the complex histories of gas generation and associated isotopic fractionation as well as in-situ “mixing and accumulation” of gases generated from different precursors at different thermal maturities. A model was proposed to explain the observed geochemical anomalies. Gas generation from kerogen cracking at relatively low thermal maturity accounted for the increase of iso-alkane/normal alkane ratios and ethane and propane δ13C values (normal trend). Simultaneous cracking of kerogen, retained oil and wet gas and associated isotopic fractionation at higher maturity caused decreasing iso-alkane/normal alkane ratios, lighter ethane and propane δ13C and corresponding conversion of carbon isotopic distribution patterns from normal through partial reversal to complete reversal. Relatively low oil expulsion efficiency at peak oil generation, low expulsion efficiency at peak gas generation and little gas loss during post-generation evolution are necessary for organic-rich shales to display the observed geochemical anomalies. High organic matter richness, high thermal maturity (high degrees of kerogen-gas and oil-gas conversions) and late-stage (the stage of peak gas generation and post-generation evolution) closed system accounted for gas enrichment in shales. Loss of free gases during post-generation evolution may result in gas depletion or even undersaturation (total gas content lower than the gas sorption capacity) in high-maturity organic-rich shales.  相似文献   

5.
The objectives of our study were to assess the thickness, lateral extent, organic richness and maturity of the potential source rocks in Hungary and to estimate the volumes of hydrocarbons generated, in order that potential shale gas and shale oil plays could be identified and characterised.The Upper Triassic Kössen Marl in south-west Hungary could represent the best potential shale gas/shale oil play, due to its high organic richness, high maturity and the presence of fracture barriers. The area of gas- and oil-generative maturity is around 720 km2 with the unexpelled petroleum estimated to be up to 9 billion barrel oil-equivalent.The Lower Jurassic sediments of the Mecsek Mountains and under the Great Plain contain fair quality gas-prone source rocks, with low shale gas potential, except for a thin Toarcian shale unit which is richer in organic matter. The latter could form a potential shale gas play under the Great Hungarian Plain, if it is thicker locally.The Lower Oligocene Tard Clay in north-east Hungary could represent the second best potential shale oil play, due to its organic richness, favourable maturity and large areal extent (4500 km2) with around 7 billion barrel oil-equivalent estimated in-place volume of petroleum.Middle Miocene marine formations could represent locally-developed shale gas plays; they have fair amounts of organic matter and a mixture of type II/III kerogen, but their vertical and lateral variability is high.The Upper Miocene lacustrine Endrőd Marl contains less organic matter and the kerogen is mainly type III, which is not favourable for shale gas generation. The high carbonate and clay content, plus the lack of upper and lower fracture barriers would represent additional production challenges.  相似文献   

6.
Three bitumen fractions were obtained and systematically analysed for the terpane and sterane composition from 30 Paleozoic source rocks and 64 bitumen-containing reservoir rocks within the Upper Sinian, Lower Cambrian, Lower Silurian, Middle Carboniferous, Upper Permian and Lower Triassic strata in the Sichuan Basin and neighbouring areas, China. These bitumen fractions include extractable oils (bitumen I), oil-bearing fluid inclusions and/or closely associated components with the kerogen or pyrobitumen/mineral matrix, released during kerogen or pyrobitumen isolation and demineralization (bitumen II), and bound compounds within the kerogen or pyrobitumen released by confined pyrolysis (bitumen III). In addition, atomic H/C and O/C ratios and carbon isotopic compositions of kerogen and pyrobitumen from some of the samples were measured. Geochemical results and geological information suggest that: (1) in the Central Sichuan Basin, hydrocarbon gases in reservoirs within the fourth section of the Upper Sinian Dengying Formation were derived from both the Lower Cambrian and Upper Sinian source rocks; and (2) in the Eastern Sichuan Basin, hydrocarbon gases in Middle Carboniferous Huanglong Formation reservoirs were mainly derived from Lower Silurian source rocks, while those in Upper Permian and Lower Triassic reservoirs were mainly derived from both Upper Permian and Lower Silurian marine source rocks. For both the source and reservoir rocks, bitumen III fractions generally show relatively lower maturity near the peak oil generation stage, while the other two bitumen fractions show very high maturities based on terpane and sterane distributions. Tricyclic terpanes evolved from the distribution pattern C20 < C21 < C23, through C20 < C21 > C23, finally to C20 > C21 > C23 during severe thermal stress. The concentration of C30 diahopane in bitumen III (the bound components released from confined pyrolysis) is substantially lower than in the other two bitumen fractions for four terrigenous Upper Permian source rocks, demonstrating that this compound originated from free hopanoid precursors, rather than hopanoids bound to the kerogen.  相似文献   

7.
The Flemish Pass Basin is a deep-water basin located offshore on the continental passive margin of the Grand Banks, eastern Newfoundland, which is currently a hydrocarbon exploration target. The current study investigates the petrographic characteristics and origin of carbonate cements in the Ti-3 Member, a primary clastic reservoir interval of the Bodhrán Formation (Upper Jurassic) in the Flemish Pass Basin.The Ti-3 sandstones with average Q86.0F3.1R10.9 contain various diagenetic minerals, including calcite, pyrite, quartz overgrowth, dolomite and siderite. Based on the volume of calcite cement, the investigated sandstones can be classified into (1) calcite-cemented intervals (>20% calcite), and (2) poorly calcite-cemented intervals (porous). Petrographic analysis shows that the dominant cement is intergranular poikilotopic (300–500 μm) calcite, which stared to form extensively at early diagenesis. The precipitation of calcite occured after feldspar leaching and was followed by corrosion of quartz grains. Intergranular calcite cement hosts all-liquid inclusions mainly in the crystal core, but rare primary two-phase (liquid and vapor) fluid inclusions in the rims ((with mean homogenization temperature (Th) of 70.2 ± 4.9 °C and salinity estimates of 8.8 ± 1.2 eq. wt.% NaCl). The mean δ18O and δ13C isotopic compositions of the intergranular calcite are −8.3 ± 1.2‰, VPDB and −3.0 ± 1.3‰, VPDB, respectively; whereas, fracture-filling calcite has more depleted δ18O but similar δ13C values. The shale normalized rare earth element (REESN) patterns of calcite are generally parallel and exhibit slightly negative Ce anomalies and positive Eu anomalies. Fluid-inclusion gas ratios (CO2/CH4 and N2/Ar) of calcite cement further confirms that diagenetic fluids originated from modified seawater. Combined evidence from petrographic, microthermometric and geochemical analyses suggest that (1) the intergranular calcite cement precipitated from diagenetic fluids of mixed marine and meteoric (riverine) waters in suboxic conditions; (2)the cement was sourced from the oxidation of organic matters and the dissolution of biogenic marine carbonates within sandstone beds or adjacent silty mudstones; and (3) the late phases of the intergranular and fracture-filling calcite cements were deposited from hot circulated basinal fluids.Calcite cementation acts as a main controlling factor on the reservoir quality in the Flemish Pass reservoir sandstones. Over 75% of initial porosity was lost due to the early calcite cementation. The development of secondary porosity (mostly enlarged, moldic pores) and throats by later calcite dissolution due to maturation of organic matters (e.g., hydrocarbon and coals), was the key process in improving the reservoir quality.  相似文献   

8.
The Western Desert of Egypt is one of the world’s most prolific Jurassic and Cretaceous hydrocarbon provinces. It is one of many basins that experienced organic-rich sedimentation during the late Cenomanian/early Turonian referred to as oceanic anoxic event 2 (OAE2). The Razzak #7 oil well in the Razzak Field in the northern part of the Western Desert encountered the Upper Cretaceous Abu Roash Formation. This study analyzed 23 samples from the upper “G”, “F”, and lower “E” members of the Abu Roash Formation for palynomorphs, particulate organic matter, total organic carbon (TOC) and δ13Corg in order to identify the OAE2, determine hydrocarbon source rock potential, and interpret the depositional environment. The studied samples are generally poor in palynomorphs, but show a marked biofacies change between the lower “E” member and the rest of the studied samples. Palynofacies analysis (kerogen quality and quantity) indicates the presence of oil- and gas-prone materials (kerogen types I and II/III, respectively), and implies reducing marine paleoenvironmental conditions. Detailed carbon stable isotopic and organic carbon analyses indicate that fluctuations in the δ13Corg profile across the Abu Roash upper “G”, “F”, and lower “E” members correspond well with changes in TOC values. A positive δ13Corg excursion (∼2.01‰) believed to mark the short-term global OAE2 was identified within the organic-rich shaly limestone in the basal part of the Abu Roash “F” member. This excursion also coincides with the peak TOC measurement (24.61 wt.%) in the samples.  相似文献   

9.
This study investigates the source rock characteristics of Permian shales from the Jharia sub-basin of Damodar Valley in Eastern India. Borehole shales from the Raniganj, Barren Measure and Barakar Formations were subjected to bulk and quantitative pyrolysis, carbon isotope measurements, mineral identification and organic petrography. The results obtained were used to predict the abundance, source and maturity of kerogen, along with kinetic parameters for its thermal breakdown into simpler hydrocarbons.The shales are characterized by a high TOC (>3.4%), mature to post-mature, heterogeneous Type II–III kerogen. Raniganj and Barren Measure shales are in mature, late oil generation stage (Rr%Raniganj = 0.99–1.22; Rr%Barren Measure = 1.1–1.41). Vitrinite is the dominant maceral in these shales. Barakar shows a post-mature kerogen in gas generation stage (Rr%Barakar = 1.11–2.0) and consist mainly of inertinite and vitrinite. The δ13Corg value of kerogen concentrate from Barren Measure shale indicates a lacustrine/marine origin (−24.6–−30.84‰ vs. VPDB) and that of Raniganj and Barakar (−22.72–−25.03‰ vs. VPDB) show the organic provenance to be continental. The δ13C ratio of thermo-labile hydrocarbons (C1–C3) in Barren Measure suggests a thermogenic source.Discrete bulk kinetic parameters indicate that Raniganj has lower activation energies (ΔE = 42–62 kcal/mol) compared to Barren Measure and Barakar (ΔE = 44–68 kcal/mol). Temperature for onset (10%), middle (50%) and end (90%) of kerogen transformation is least for Raniganj, followed by Barren Measure and Barakar. Mineral content is dominated by quartz (42–63%), siderite (9–15%) and clay (14–29%). Permian shales, in particular the Barren Measure, as inferred from the results of our study, demonstrate excellent properties of a potential shale gas system.  相似文献   

10.
The Qiongdongnan Basin, South China Sea has received huge thickness (>12 km) of Tertiary-Quaternary sediments in the deepwater area to which great attention has been paid due to the recent discoveries of the SS22-1 and the SS17-2 commercial gas fields in the Pliocene-Upper Miocene submarine canyon system with water depth over 1300 m. In this study, the geochemistry, origin and accumulation models of these gases were investigated. The results reveal that the gases are predominated by hydrocarbon gases (98%–99% by volume), with the ratio of C1/C1-5 ranging from 0.92 to 0.94, and they are characterized by relatively heavy δ13C1 (−36.8‰ to −39.4‰) and δDCH4 values (−144‰ to −147‰), similar to the thermogenic gases discovered in the shallow water area of the basin. The C5-7 light hydrocarbons associated with these gases are dominated by isoparaffins (35%–65%), implying an origin from higher plants. For the associated condensates, carbon isotopic compositions and high abundance of oleanane and presence of bicadinanes show close affinity with those from the YC13-1 gas field in the shallow water area. All these geochemical characteristics correlate well with those found in the shales of the Oligocene Yacheng Formation in the Qiongdongnan Basin. The Yacheng Formation in the deepwater area has TOC values in the range of 0.4–21% and contains type IIb–III gas-prone kerogens, indicating an excellent gas source rock. The kinetic modeling results show that the δ13C1 values of the gas generated from the Yacheng source rock since 3 or 4 Ma are well matched with those of the reservoir gases, indicating that the gas pool is young and likely formed after 4 Ma. The geologic and geochemical data show that the mud diapirs and faults provide the main pathways for the upward migration of gases from the deep gas kitchen into the shallow, normally pressured reservoirs, and that the deep overpressure is the key driving force for the vertical and lateral migration of gas. This gas migration pattern implies that the South Low Uplift and the No.2 Fault zone near the deepwater area are also favorable for gas accumulation because they are located in the pathway of gas migration, and therefore more attention should be paid to them in the future.  相似文献   

11.
Geochemical studies of shale gas and conventional reservoirs within the Triassic Yanchang Formation of Xiasiwan and Yongning Field, Ordos Basin show that methane is isotopically depleted in 13C as compared to δ13C1 calculated by the Ro based on the relationship between δ13C1 and Ro. Geochemical fractionation during the adsorption/desorption process of shale system may play a significant part in influencing δ13C1 values of shale gas. Two shale core samples from confined coring of the Yanchang Formation were adopted segmented desorption experiments to examine this phenomenon. The results show that the δ13C1 of desorbed gas changes little in the first few phases of the experiments at low desorption levels, but become less negative rapidly when the fraction of desorbed methane exceeds 85%. The desorption process for the last 15% fraction of the methane from the shale samples shows a wide variation in δ13C1 from −49‰ to −33.9‰. Moreover, δ13C1 of all desorbed methane from the shale samples is substantially depleted in 13C than that calculated by Ro, according to Stahl and Carey's δ13C1–Ro equation for natural gas generated from sapropelic organic matter. This shows some gases with isotopically enriched in 13C cannot be desorbed under the temperature and pressure conditions of the desorption experiments. This observation may be the real reason for the δ13C1 of shale gases and conventional reservoirs becomes more negative in Xiasiwan and Yongning Fields, Ordos Basin. The magnitude of the deviation between the δ13C1 of shale gas and that calculated by Ro may be related to the adsorption capacity of shale or the proportion of absorbed gases. In this way, we may be able to evaluate the relative adsorption capacity of shale in geological conditions by δ13C1 of the shale gas, or by δ13C1 of conventional gas which generated by the shale with certainty. The δ13C1 of conventional gas in Dingbian and Yingwang Fields have no deviation because the TOC value of the hydrocarbon source rock is relatively low.  相似文献   

12.
Fluid inclusion gases in minerals from shale hosted fracture-fill mineralization have been analyzed for stable carbon isotopic ratios of CH4 using a crushing device interfaced to an isotope ratio mass spectrometer (IRMS). The samples of Paleozoic strata under study originate from outcrops and wells in the Rhenish Massif and Campine Basin, Harz Mountains, and the upper slope of the Southern Permian Basin. Fracture-fill mineralization hosted by Mesozoic strata was sampled from drill cores in the Lower Saxony Basin. Some studied sites are candidates for shale gas exploration in Germany. Samples of Mesozoic strata are characterized by abundant calcite-filled horizontal fractures which preferentially occur in TOC-rich sections of the drilled sediments. Only rarely are vertical fractures filled with carbonates and/or quartz in drill cores from Mesozoic strata but in Paleozoic shale they occur frequently. The δ13C(CH4) values of fluid inclusions in calcite from horizontal fractures hosted by Mesozoic strata suggest that gaseous hydrocarbons were generated during the oil/early gas window and that the formation of horizontal fractures seems to be related to hydraulic expulsion fracturing. The calculated maturity of the source rocks at the time of gas generation lies below the maturity derived from measured vitrinite reflectance. Thus, the formation of horizontal fractures and trapping of gas that was generated in the oil and/or early gas window obviously occurred prior to maximal burial. Rapidly increasing vitrinite reflectance data seen locally can be explained by hydrothermal alteration, as indicated by increasing δ13C (CH4–CO2) values in fluid inclusions. The formation of vertical fractures in studied Mesozoic sediments is related to stages of post-burial inversion; gas-rich inclusions in fracture filling minerals recorded the migration of gas that had probably been generated instantaneously, rather than cumulatively, from high to overmature source rocks. Since no evidence is given for the presence of early generated gas in studied Paleozoic shale, it appears likely that major gas loss from shales occurred due to deformation and uplift of these sediments in response to the Variscan Orogeny.  相似文献   

13.
Oil samples from Lower Cretaceous to Eocene reservoirs in southwest Iran were analyzed using gas chromatography–mass spectrometry and gas chromatography–isotope ratio mass spectrometry for genetic classification of oil families and determining their maturity. The Studied oil samples are non-biodegraded and their gravity range from 18.3 to 37° API. The slight even/odd n-alkane predominance, coupled with low Pr/Ph values, suggests their likely source rocks with a predominance of algal organic matter, type IIS kerogen deposited under strongly reducing marine environments. The biomarker distribution of investigated oils is characterized by high concentration of both C29 and C30 hopanes and ratios of C29/C30H are generally greater than unity. There is a marked predominance of C29 regular sterane over C27 and C28 homologs in our studied oils. High sterane/hopane values and cross plot of the δ13C sat versus δ13C aro show contribution of marine organic matter. Medium value of gammacerane index and other salinity indices show water density stratification and high salinity conditions of the environment of deposition. It can be concluded that the studied reservoirs, due to their variable maturity have different API gravity and contain two oil families (types A and B) with latter being deeper and comprising more mature oils.  相似文献   

14.
Ever since a breakthrough of marine shales in China, lacustrine shales have been attracting by the policy makers and scientists. Organic-rich shales of the Middle Jurassic strata are widely distributed in the Yuqia Coalfield of northern Qaidam Basin. In this paper, a total of 42 shale samples with a burial depth ranging from 475.5 m to 658.5 m were collected from the Shimengou Formation in the YQ-1 shale gas borehole of the study area, including 16 samples from the Lower Member and 26 samples from the Upper Member. Geochemistry, reservoir characteristics and hydrocarbon generation potential of the lacustrine shales in YQ-1 well were preliminarily investigated using the experiments of vitrinite reflectance measurement, maceral identification, mineralogical composition, carbon stable isotope, low-temperature nitrogen adsorption, methane isothermal adsorption and rock eval pyrolysis. The results show that the Shimengou shales have rich organic carbon (averaged 3.83%), which belong to a low thermal maturity stage with a mean vitrinite reflectance (Ro) of 0.49% and an average pyrolytic temperature of the generated maximum remaining hydrocarbon (Tmax) of 432.8 °C. Relative to marine shales, the lacustrine shales show low brittleness index (averaged 34.9) but high clay contents (averaged 55.1%), high total porosities (averaged 13.71%) and great Langmuir volumes (averaged 4.73 cm−3 g). Unlike the marine and marine-transitional shales, the quartz contents and brittleness index (BI) values of the lacustrine shales first decrease then increase with the rising TOC contents. The kerogens from the Upper Member shales are dominant by the oil-prone types, whereas the kerogens from the Lower Member shales by the gas-prone types. The sedimentary environment of the shales influences the TOC contents, thus has a close connection with the hydrocarbon potential, mineralogical composition, kerogen types and pore structure. Additionally, in terms of the hydrocarbon generation potential, the Upper Member shales are regarded as very good and excellent rocks whereas the Lower Member shales mainly as poor and fair rocks. In overall, the shales in the top of the Upper Member can be explored for shale oil due to the higher free hydrocarbon amount (S1), whereas the shales in the Lower Member and the Upper Member, with the depths greater than 1000 m, can be suggested to explore shale gas.  相似文献   

15.
Crude oil samples from Cretaceous and Tertiary reservoir sections in the Zagros Fold Belt oil fields, southern Iraq were investigated using non-biomarker and biomarker parameters. The results of this study have been used to assess source of organic matter, and the genetic link between oils and their potential source rocks in the basin. The oils are characterized by high sulphur and trace metal (Ni, V) contents and relatively low API gravity values (17.4–22.7° API). This indicates that these oils are heavy and generated from a marine source rock containing Type II-S kerogen. This is supported by their biomarker distributions of normal alkanes, regular isoprenoids, terpanes and steranes and the bulk carbon isotope compositions of their saturated and aromatic hydrocarbons. The oils are characterized by low Pr/Ph ratios (<1), high values of the C35 homohopane index and C31-22R/C30 hopane ratios, relatively high C27 sterane concentrations, and the predominance of C29-norhopane. These biomarkers suggest that the oils were generated predominantly from a marine carbonate source rock, deposited under reducing conditions and containing plankton/algal and microorganisms source input. The presence of gammacerane also suggests water column stratification during source rock deposition.The biomarker characteristics of the oils are consistent with those of the Middle Jurassic Sargelu carbonate as the effective source rock in the basin. Biomarker maturity data indicate that the oils were generated from early maturity source rocks.  相似文献   

16.
Structured organic matters of the Palynomorphs of mainly dinoflagellate cysts are used in this study for dating the limestone, black shale, and marl of the Middle Jurassic (Bajocian–Bathonian) Sargelu Formation, Upper Jurassic (Upper Callovian – Lower Oxfordian) Naokelekan Formation, Upper Jurassic (Kimeridgian and Oxfordian) Gotnia and Barsarine Formations, and Upper Jurassic – Lower Cretaceous (Tithonian-Beriassian) Chia Gara source rock Formations while spore species of Cyathidites australis and Glechenidites senonicus are used for maturation assessments of this succession. Materials' used for this palynological study are 320 core and cutting samples of twelve oil wells and three outcrops in North Iraq.Terpane and sterane biomarker distributions, as well as stable isotope values, were determined for oils potential source rock extracts of Jurassic-Lower Cretaceous strata to determine valid oil-to-source rock correlations in North Iraq. Two subfamily carbonate oil types-one of Middle Jurassic age (Sargelu) carbonate rock and the other of mixed Upper Jurassic/Cretaceous age (Chia Gara) with Sargelu sources as well as a different oil family related to Triassic marls, were identified based on multivariate statistical analysis (HCA & PCA). Middle Jurassic subfamily A oils from Demir Dagh oil field correlate well with rich, marginally mature, Sargelu source rocks in well Mk-2 near the city of Baiji. In contrast, subfamily B oils have a greater proportion of C28/C29 steranes, indicating they were generated from Upper Jurassic/Lower Cretaceous carbonates such as those at Gillabat oil field north of Mansuriyah Lake. Oils from Gillabat field thus indicate a lower degree of correlation with the Sargelu source rocks than do oils from Demir Dagh field.Palynofacies assessments are performed for this studied succession by ternary kerogen plots of the phytoclast, amorphous organic matters, and palynomorphs. From the diagram of these plots and maturation analysis, it could be assessed that the formations of Chia Gara and Sargelu are both deposited in distal suboxic to anoxic basin and can be correlated with kerogens classified microscopically as Type A and Type B and chemically as Type II. The organic matter, comprised principally of brazinophyte algae, dinoflagellate cysts, spores, pollen, foraminifera test linings, and phytoclasts in all these formations and hence affected with upwelling current. These deposit contain up to 18 wt% total organic matters that are capable to generate hydrocarbons within mature stage of thermal alteration index (TAI) range in Stalplin's scale (Staplin, 1969) of 2.7–3.0 for the Chia Gara Formation and 2.9–3.1 for the Sargelu Formation. Case study examples of these oil prone strata are; one 7-m (23-ft) thick section of the Sargelu Formation averages 44.2 mg HC/g S2 and 439 °C Tmax (Rock-Eval pyrolysis analyses) and 16 wt% TOC especially in well Mk-2 whereas, one 8-m (26-ft) thick section of the Chia Gara and 1-m (3-ft) section of Naokelekan Formations average 44.5 mg HC/g S2 and 440 °C Tmax and 14 wt% TOC especially in well Aj-8. One-dimension, petroleum system models of key wells using IES PetroMod Software can confirm their oil generation capability.These hydrocarbon type accumulation sites are illustrated in structural cross sections and maps in North Iraq.  相似文献   

17.
Hydrate-bearing sediment cores were retrieved from recently discovered seepage sites located offshore Sakhalin Island in the Sea of Okhotsk. We obtained samples of natural gas hydrates and dissolved gas in pore water using a headspace gas method for determining their molecular and isotopic compositions. Molecular composition ratios C1/C2+ from all the seepage sites were in the range of 1,500–50,000, while δ13C and δD values of methane ranged from ?66.0 to ?63.2‰ VPDB and ?204.6 to ?196.7‰ VSMOW, respectively. These results indicate that the methane was produced by microbial reduction of CO2. δ13C values of ethane and propane (i.e., ?40.8 to ?27.4‰ VPDB and ?41.3 to ?30.6‰ VPDB, respectively) showed that small amounts of thermogenic gas were mixed with microbial methane. We also analyzed the isotopic difference between hydrate-bound and dissolved gases, and discovered that the magnitude by which the δD hydrate gas was smaller than that of dissolved gas was in the range 4.3–16.6‰, while there were no differences in δ13C values. Based on isotopic fractionation of guest gas during the formation of gas hydrate, we conclude that the current gas in the pore water is the source of the gas hydrate at the VNIIOkeangeologia and Giselle Flare sites, but not the source of the gas hydrate at the Hieroglyph and KOPRI sites.  相似文献   

18.
About 120 gas seepage vents were documented along the west and southwest coast of the Hainan Island, South China Sea, in water depths usually less than 50 m. The principal seepage areas include the Lingtou Promontory, the Yinggehai Rivulet Mouth, Yazhou Bay, the Nanshan Promontory and the Tianya Promontory. They occur along three major zones, reflecting the control by faults and lateral conduits within the basement. It is estimated that the total gas emission from these seepage vents is 294–956 m3/year. The seepage gases are characterized by a high CH4 content (76%), heavy δ13C1 values (−38 to −33‰) and high C1/C1–5 ratios (0.95–1.0), resembling the thermogenic gases from the diapiric gas fields of the Yinggehai Basin. Hydrocarbon–source correlation shows that the hydrocarbons in the sediments from seepage areas can be correlated with the deeply buried Miocene source rocks and sandstone reservoirs in the central depression. The 2D basin modeling results based on a section from the source rock center to the gas seepage sites indicate that the gas-bearing fluids migrated from the source rocks upward through faults or weak zones encompassed by shale diapirism or in up-dip direction along the sandstone-rich strata of Huangliu Formation to arrive to seabed and form the nearshore gas seepages. It is suggested that the seepage gases are sourced from the Miocene source rocks in the central depression of the Yinggehai Basin. This migration model implies that the eastern slope zone between the gas source area of the central depression and the seepage zone is also favorable place for gas accumulation.  相似文献   

19.
The assessment of gas origin in mud volcanoes and related petroleum systems must consider post-genetic processes which may alter the original molecular and isotopic composition of reservoir gas. Beyond eventual molecular and isotopic fractionation due to gas migration and microbial oxidation, investigated in previous studies, we now demonstrate that mud volcanoes can show signals of anaerobic biodegradation of natural gas and oil in the subsurface. A large set of gas geochemical data from more than 150 terrestrial mud volcanoes worldwide has been examined. Due to the very low amount of C2+ in mud volcanoes, isotopic ratios of ethane, propane and butane (generally the best tracers of anaerobic biodegradation) are only available in a few cases. However, it is observed that 13C-enriched propane is always associated with positive δ13CCO2 values, which are known indicators of secondary methanogenesis following anaerobic biodegradation of petroleum. Data from carbon isotopic ratio of CO2 are available for 134 onshore mud volcanoes from 9 countries (Azerbaijan, Georgia, Ukraine, Russia, Turkmenistan, Trinidad, Italy, Japan and Taiwan). Exactly 50% of mud volcanoes, all releasing thermogenic or mixed methane, show at least one sample with δ13CCO2 > +5‰ (PDB). Thermogenic CH4 associated with positive carbon isotopic ratio of CO2 generally maintains its δ13C-enriched signature, which is therefore not perturbed by the lighter secondary microbial gas. There is, however, high variability in the δ13CCO2 values within the same mud volcanoes, so that positive δ13CCO2 values can be found in some vents and not in others, or not continuously in the same vent. This can be due to high sensitivity of δ13CCO2 to gas–water–rock interactions or to the presence of differently biodegraded seepage systems in the same mud volcano. However, finding a positive δ13CCO2 value should be considered highly indicative of anaerobic biodegradation and further analyses should be made, especially if mud volcanoes are to be used as pathfinders of the conditions indicative of subsurface hydrocarbon accumulations in unexplored areas.  相似文献   

20.
Geochemical characteristics of organic matter in the profiles of Dukla, Silesian, Sub-Silesian and Skole units of the Polish Outer Carpathians and of the Palaeozoic–Mesozoic basement in the Dębica-Rzeszów-Leżajsk-Sanok area were established based on Rock-Eval, vitrinite reflectance, isotopic and biomarker analyses of 485 rock samples. The Oligocene Menilite beds have the best hydrocarbon potential of all investigated formations within the Dukla, Silesian, and Skole units. The Ordovician, Silurian, Lower Devonian and locally Middle Jurassic strata of the Palaeozoic–Mesozoic basement are potential source rocks for oil and gas accumulated in Palaeozoic and Mesozoic reservoirs. Thirty one natural gas samples from sandstone reservoirs of the Lower Cretaceous-Lower Miocene strata within the Outer Carpathian sequence and eight from sandstone and carbonate reservoirs of the Palaeozoic–Mesozoic basement were analysed for molecular and isotopic compositions to determine their origin. Natural gases accumulated both in the Outer Carpathian and the Palaeozoic–Mesozoic basement reservoirs are genetically related to thermogenic and microbial processes. Thermogenic gaseous hydrocarbons that accumulated in the Dukla and Silesian units were generated from the Menilite beds. Thermogenic gaseous hydrocarbons that accumulated in the Sub-Silesian Unit most probably migrated from the Silesian Unit. Initial, and probably also secondary microbial methane component has been generated during microbial carbon dioxide reduction within the Oligocene Menilite beds in the Dukla Unit and Oligocene-Lower Miocene Krosno beds in the Silesian Unit. Natural gases that accumulated in traps within the Middle Devonian, Mississippian, Upper Jurassic, and Upper Cretaceous reservoirs of the Palaeozoic–Mesozoic basement were mainly generated during thermogenic processes and only sporadically from initial microbial processes. The thermogenic gases were generated from kerogen of the Ordovician-Silurian and Middle Jurassic strata. The microbial methane component occurs in a few fields of the Dukla and Silesian units and in the two accumulations in the Middle Devonian reservoirs of the Palaeozoic–Mesozoic basement.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号