首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 734 毫秒
1.
The regional burial history pattern, thermal maturity variations and source rock assessment of the sedimentary succession in the eastern Taurus region, in the southern part of Turkey, have been studied on surface samples collected from the six different sections which represent the entire region. Organic petrography (Thermal Alteration Index) and geochemical data (TOC content, Tmax and HI values) were obtained from transmitted-light microscopy and Rock-Eval pyrolysis.The Lower Paleozoic (Cambrian, Ordovician and Silurian) strata were not investigated and modeled in terms of the maturity and hydrocarbon source rock potential, because of their poor organic matter content and their over maturity resulting from great burial depth (more than 7630 m). Other Paleozoic strata, except the Lower Devonian Ayitepesi Formation, generally have the values of more than 0.5% TOC. Organic matter of the Middle Devonian Safaktepesi sediments are composed of highly terrestrial organic material (type III kerogen), while samples from other three formations (Gumusali, Ziyarettepe and Yigilitepe Formations), while samples from other organic matter (type II and type III kerogen). The average TAI values are as high as 3.4 (equivalent to 1.42 of R0%) for Ayitepesi and as low as 2.75 (equivalent to 0.77 of R0%) for Yigilitepe Formations. Time-temperature index values (TTI) indicate that Ziyarettepe and Yigilitepe sediments are marginally mature to mature, while the Devonian strata are overmature. There are minor discrepancies between ΣTTI values and geochemical data in terms of the organic maturity for Devonian strata. In contrast, the e is a consistency between those values for the Ziyarettepe and the Yigilitepe Formations. The onset of oil generation time in the region was initiated from as early as the Norian (216 Ma) to as late as the Lutetian (45 Ma).Regional variations in the level of thermal and source-rock maturities of the Upper Paleozoic sediments in the eastern Taurus region largely depend on burial depth.  相似文献   

2.
Differences in fluids origin, creation of overpressure and migration are compared for end member Neogene fold and thrust environments: the deepwater region offshore Brunei (shale detachment), and the onshore, arid Central Basin of Iran (salt detachment). Variations in overpressure mechanism arise from a) the availability of water trapped in pore-space during early burial (deepwater marine environment vs arid, continental environment), and b) the depth/temperature at which mechanical compaction becomes a secondary effect and chemical processes start to dominate overpressure development. Chemical reactions associated with smectite rich mud rocks in Iran occur shallow (∼1900 m, smectite to illite transformation) causing load-transfer related (moderate) overpressures, whereas mechanical compaction and inflationary overpressures dominate smectite poor mud rocks offshore Brunei. The basal detachment in deepwater Brunei generally lies below temperatures of about 150 °C, where chemical processes and metagenesis are inferred to drive overpressure development. Overall the deepwater Brunei system is very water rich, and multiple opportunities for overpressure generation and fluid leakage have occurred throughout the growth of the anticlines. The result is a wide variety of fluid migration pathways and structures from deep to shallow levels (particularly mud dykes, sills, laccoliths, volcanoes and pipes, fluid escape pipes, crestal normal faults, thrust faults) and widespread inflationary-type overpressure. In the Central Basin the near surface environment is water limited. Mechanical and chemical compaction led to moderate overpressure development above the Upper Red Formation evaporites. Only below thick Early Miocene evaporites have near lithostatic overpressures developed in carbonates and marls affected by a wide range of overpressure mechanisms. Fluid leakage episodes across the evaporites have either been very few or absent in most areas. Locations where leakage can episodically occur (e.g. detaching thrusts, deep normal faults, salt welds) are sparse. However, in both Iran and Brunei crestal normal faults play an important role in the transmission of fluids in the upper regions of folds.  相似文献   

3.
Abstract

Independent and complementary methods were used for pore pressure assessment in the eastern Tunisian basins. Drilling data and surveys allow settling the pore pressure profile in these basins. The main used parameters are mud weights, formation pressure surveys, drilling parameters, well logs, fluids exchange with formation and borehole issues. In the eastern Tunisia platform, the pore pressure profiles show changes in overpressure magnitude in all the three dimensions of the basin (location and depth/stratigraphy). We highlighted two overpressure intervals form bottom to top: The late Cretaceous in the North-eastern part, and the Tertiary overpressure interval hosted in the Palaeocene to Miocene series. The structural analysis of overpressure location shows that the Tertiary interval is likely to have originated in a disequilibrium compaction in Cenozoic grabens. Pore pressure cross sections and maps confirm the link between active normal faults that segmented the basin to grabens and highs and pore pressure anomalous area. In the Senonian interval, we noted mature source-rocks that can explain the overpressure in the late Cretaceous interval. In addition, the recent to active compressive tectonics may have contributed to both pore pressure anomaly generations. The fluid overpressures characterization in the eastern Tunisian sedimentary basins helps in hydrocarbons exploration. Indeed, the overpressure interval in the reservoir levels stimulates and improves the production in the oilfields and contributes to hydrocarbon trapping. Moreover, the adequate prediction of pore pressure profile contributes to reduce drilling cost and enhance the drilling operations safety.  相似文献   

4.
东营市东辛2-4井磁性地层划分对比研究   总被引：6，自引：1，他引：6  
本文通过东辛2—4井岩心样品的古地磁学研究,整段岩心呈现以正极性为主的混合极性特征。自上而下划分的布容、松山、高斯和吉尔伯特极性时和布容极性时内清晰显示出的哥德堡和布莱克亚时的界限分别位于井深28.0m、161.0m、274.5m和452.0m。据黄河口南北5个钻孔磁性地层的划分对比,长江口、苏北盆地和东营地区,吉尔伯特、高斯和布容极性时的沉积速度较快,松山极性时较慢或近于缺失;黄河口以北至河北地区,高斯极性时地层不发育,吉尔伯特、松山和布容极性时则较厚,表明它们所处的构造单元、地质基础和沉积环境有较大的不同。  相似文献   

5.
Most of the methods currently used for pore pressure prediction in sedimentary basins assume one-dimensional compaction based on relationships between vertical effective stress and porosity. These methods may be inaccurate in complex tectonic regimes where stress tensors are variable. Modelling approaches for compaction adopted within the geotechnical field account for both the full three-dimensional stress tensor and the stress history. In this paper a coupled geomechanical-fluid flow model is used, along with an advanced version of the Cam-Clay constitutive model, to investigate stress, pore pressure and porosity in a Gulf of Mexico style mini-basin bounded by salt subjected to lateral deformation. The modelled structure consists of two depocentres separated by a salt diapir. 20% of horizontal shortening synchronous to basin sedimentation is imposed. An additional model accounting solely for the overpressure generated due to 1D disequilibrium compaction is also defined. The predicted deformation regime in the two depocentres of the mini-basin is one of tectonic lateral compression, in which the horizontal effective stress is higher than the vertical effective stress. In contrast, sediments above the central salt diapir show lateral extension and tectonic vertical compaction due to the rise of the diapir. Compared to the 1D model, the horizontal shortening in the mini-basin increases the predicted present-day overpressure by 50%, from 20 MPa to 30 MPa. The porosities predicted by the mini-basin models are used to perform 1D, porosity-based pore pressure predictions. The 1D method underestimated overpressure by up to 6 MPa at 3400 m depth (26% of the total overpressure) in the well located at the basin depocentre and up to 3 MPa at 1900 m depth (34% of the total overpressure) in the well located above the salt diapir. The results show how 2D/3D methods are required to accurately predict overpressure in regions in which tectonic stresses are important.  相似文献   

6.
Diagenetically altered mudstones compact mechanically and chemically. Consequently, their normal compaction trends depend upon their temperature history as well as on the maximum effective stress they have experienced. A further complication is that mudstones are commonly overpressured where clay diagenesis occurs, preventing direct observation of the hydrostatic normal compaction trend. A popular way to estimate pore pressure in these circumstances is to calculate the sonic normal compaction trend in a well with a known pressure–depth profile by applying Eaton's method in reverse, and then to estimate pore pressure in offset wells using Eaton's method conventionally. We tested this procedure for Cretaceous mudstones at Haltenbanken. The results were inconsistent because the sonic log responds differently to disequilibrium compaction overpressure and unloading overpressure, and their relative contributions vary across the basin. In theory, a two-step method using the density and sonic logs could estimate the contributions to overpressure from disequilibrium compaction and unloading. The normal compaction trend for density should be the normal compaction trend at the maximum effective stress the mudstones have experienced, not at hydrostatic effective stress. We advocate the Budge-Fudge approach as a starting point for pore pressure estimation in diagenetically altered mudstones, a two-step method that requires geological input to help estimate the overpressure contribution from disequilibrium compaction. In principle, the Budge-Fudge approach could be used to estimate the normal compaction trend for mudstones at the maximum effective stress they have experienced, and so form the basis of the full two-step method through the use of offset wells. Our initial efforts to implement the full two-step method in this way at Haltenbanken produced inconsistent results with fluctuations in estimated pore pressure reflecting some of the fluctuations in the density logs. We suspect that variations in the mineralogical composition of the mudstones are responsible.  相似文献   

7.
Differences in fluids origin, creation of overpressure and migration are compared for end member Neogene fold and thrust environments: the deepwater region offshore Brunei (shale detachment), and the onshore, arid Central Basin of Iran (salt detachment). Variations in overpressure mechanism arise from a) the availability of water trapped in pore-space during early burial (deepwater marine environment vs arid, continental environment), and b) the depth/temperature at which mechanical compaction becomes a secondary effect and chemical processes start to dominate overpressure development. Chemical reactions associated with smectite rich mud rocks in Iran occur shallow (∼1900 m, smectite to illite transformation) causing load-transfer related (moderate) overpressures, whereas mechanical compaction and inflationary overpressures dominate smectite poor mud rocks offshore Brunei. The basal detachment in deepwater Brunei generally lies below temperatures of about 150 °C, where chemical processes and metagenesis are inferred to drive overpressure development. Overall the deepwater Brunei system is very water rich, and multiple opportunities for overpressure generation and fluid leakage have occurred throughout the growth of the anticlines. The result is a wide variety of fluid migration pathways and structures from deep to shallow levels (particularly mud dykes, sills, laccoliths, volcanoes and pipes, fluid escape pipes, crestal normal faults, thrust faults) and widespread inflationary-type overpressure. In the Central Basin the near surface environment is water limited. Mechanical and chemical compaction led to moderate overpressure development above the Upper Red Formation evaporites. Only below thick Early Miocene evaporites have near lithostatic overpressures developed in carbonates and marls affected by a wide range of overpressure mechanisms. Fluid leakage episodes across the evaporites have either been very few or absent in most areas. Locations where leakage can episodically occur (e.g. detaching thrusts, deep normal faults, salt welds) are sparse. However, in both Iran and Brunei crestal normal faults play an important role in the transmission of fluids in the upper regions of folds.  相似文献   

8.
The Kuqa Foreland Basin (KFB) immediately south of the South Tianshan Mountains is a major hydrocarbon producing basin in west China. The Kelasu Thrust Belt in the basin is the most favorable zone for hydrocarbon accumulations. Widespread overpressures are present in both the Cretaceous and Paleogene reservoirs with pressure coefficients up to 2.1. The tectonic compression process in KFB resulted from the South Tianshan Mountains uplift is examined from the viewpoint of the overpressure generation and evolution in the Kelasu Thrust Belt. The overpressure evolution in the reservoir sandstones were reconstructed through fluid inclusion analysis combined with PVT and basin modeling. Overpressures at present day in the mudstone units in the Kelasu Thrust Belt and reservoir sandstones of the Dabei Gas Field and the Keshen zone are believed to have been generated by horizontal tectonic compression. Both disequilibrium compaction and horizontal tectonic compression are thought to contribute to the overpressure development at present day in the reservoir of the Kela-2 Gas Field with the reservoir sandstones showing anomalously high primary porosities and low densities from wireline log and core data. The overpressure evolution for the Cretaceous reservoir sandstone in the Kelasu Thrust Belt evolved through four stages: a normal hydrostatic pressure (>12–5 Ma), a rapidly increasing overpressure (∼5–3 Ma), an overpressure release (∼3–1.64 Ma) and overpressure preservation (∼1.64–0 Ma). Overpressure developed in the second stage (∼5–3 Ma) was generated by disequilibrium compaction as tectonic compression due to the uplift of the Tianshan Mountains acted at the northern monocline of KFB from 5 Ma to 3 Ma, which provided abundant sediments for the KFB and caused the anomalously high sedimentation rate during the N2k deposition. From 3 Ma to 1.64 Ma, the action of tectonic compression extended from the northern monocline to the Kelasu Thrust Belt and returned to the northern monocline of KFB from 1.64 Ma to present day. Therefore, the horizontal tectonic compression was the dominant overpressure mechanism for the overpressure generation in the third stage (∼3–1.64 Ma) and overpressure caused by disequilibrium compaction from 5 Ma to 3 Ma was only preserved in the Kela-2 Gas Field until present day.  相似文献   

9.
YC21-1 is a gas-bearing structure found within the Yanan sag in the Qiongdongnan Basin, South China Sea. While the structure bears many geological similarities to the nearby YC13-1 gas field, it nevertheless does not contain commercially viable gas volumes. The main reservoirs of the YC21-1 structure contain high overpressures, which is greatly different from those of the YC13-1 structure. The pressure coefficients from drillstem tests, wireline formation tests and mud weights are above 2.1. Based on well-log analysis, illite content and vitrinite reflectance data of mudstones in well YC21-1-2, combining with tectonic and sedimentation characteristics, the timing and causes of overpressure generation are here interpreted. The results indicate the existence of two overpressure segments in the YC21-1 structure. The first overpressure segment resides mainly within the lower and the middle intervals of the Yinggehai Formation, and is interpreted to have been mainly caused by clay diagenesis, while disequilibrium compaction and hydrocarbon generation may also have contributed to overpressure generation. The second overpressure segment comprising the Sanya Formation (Pressure transition zone) and the Lingshui and Yacheng Formations (Hard overpressure zone) is interpreted to owe its presence to kerogen-to-gas cracking. According to petrography, homogenization temperature and salinity of fluid inclusions, two stages of oil-gas charge occurred within the main reservoirs. On the basis of overpressure causes and oil-gas charge history, combining with restored tectonic evolution and fluid inclusion characteristics, a complex accumulation and leakage process in the YC21-1 gas bearing structure has been interpreted. Collective evidence suggests that the first oil charge occurred in the Middle Miocene (circa 16.3–11.2 Ma). Small amount of oil generation and absence of caprocks led to the failure of oil accumulation. Rapid subsidence in the Pliocene and Quaternary gave rise to a sharp increase in geotemperature over a short period of time, leading to prolific gas-generation through pyrolysis and, consequently, overpressure within the main reservoirs (the second overpressure segment). During this period, the second gas charge occurred in the Pliocene and Quaternary (circa 4.5–0.4 Ma). The natural gas migrated in several phases, consisting of free and water soluble phases in a high-pressure environment. Large amounts of free gas are considered to have been consumed due to dissolution within formation water in highly pressured conditions. Water soluble gas could not accumulate in high point of structure. When the pore-fluid pressures in main reservoirs reached the fracture pressure of formation, free gas could leak via opened fractures within cracked caprocks. A repeated fracturing of caprocks may have consumed natural gas stored in formation water and have made water-soluble gas unsaturated. Therefore, the two factors including caprocks fracturing and dissolution of formation water are interpreted to be mainly responsible for the failure of natural gas accumulation in the YC21-1 structure.  相似文献   

10.
In the Austrian Molasse Basin bacterial methane gas accumulations occur in Upper Oligocene to early Miocene deepwater clastic sediments. Gas is produced from the Upper Puchkirchen Formation (Aquitanian) in the Atzbach-Schwanenstadt gas field.  相似文献   

11.
华南陆缘出露的上三叠统-白垩系,累计厚度超过10 000m,露头调查未见油苗,烃源岩主要为泥岩、碳质泥岩和煤线,有机质类型以Ⅱ-Ⅲ型为主。上三叠统小水组,发育较深水的海相、Ⅱ型良好烃源岩,TOC为1.17%～5.43%;下侏罗统桥源组发育海陆过渡环境的Ⅲ型良好烃源岩,TOC为1.36%～10.37%;下侏罗统其他层系(金鸡组、银瓶山组、上龙水组、长埔组、吉水门组)发育浅海-半深海相的中等-好的烃源岩,TOC为0.5%～1.76%。烃源岩均已处于成熟-过成熟阶段。小水组、蓝塘群烃源岩品质良好,厚度巨大,在南海北部海域开展中生界烃源岩研究时,值得重点关注是否有与之相当的烃源岩层系发育。  相似文献   

12.
Geochemical and detrital zircon U-Pb dating data for drilled sediments from the Baiyun deepwater area of the northern South China Sea demonstrate a change of sedimentary sources from the Oligocene to the Miocene.Zircon ages of the pre-rift Eocene sequences are dominated by Yanshanian ages with various peak values(110–115 Ma for U1435 and L21; 150 Ma for H1), indicating local sediment supply from the pre-existing Mesozoic magmatic belt. For the Oligocene sediments in the northern part of the basin, the rare earth elements show different distribution characteristics, indicating sediment supply from the paleo-Zhujiang River(Pearl River), as also confirmed by the multimodal zircon age spectra of the Lower Oligocene strata in Well X28. By contrast, a positive Eu anomaly characterizes sediments from the western and southern parts of the basin, indicating potential provenances from intermediate to basic volcanic rock materials. The Baiyun Movement at the end of the Oligocene contributed to a large-scale subsidence in the deepwater area and also a northward retreat of continental shelf break, leading to deepening depositional environment in the basin. As a result, all the detrital zircon ages of the Upper Oligocene strata from Wells X28, L13, and L21 share a similar distribution, implying the possible control of a common source like the Zhujiang River. During the Miocene, whereas sediments in the northern area were mainly sourced from the Zhujiang River Delta, and those in the southern deepwater area continued to be affected by basic volcanic activities, the Dongsha Uplift could have contributed as the main source to the eastern area.  相似文献   

13.
The Upper Triassic – Lower Jurassic Åre Formation comprising the deeper reservoir in the Heidrun Field offshore mid-Norway consists of fluvial channel sandstones (FCH), floodplain fines (FF), and sandy and muddy bay-fill sediments (SBF, MBF) deposited in an overall transgressive fluvial to lower delta plain regime. The formation has been investigated to examine possible sedimentary facies controls on the distribution of cementation and compaction based on petrography and SEM/micro probe analyses of core samples related to facies associations and key stratigraphic surfaces. The most significant authigenic minerals are kaolinite, calcite and siderite. Kaolinite and secondary porosity from dissolution of feldspar and biotite are in particular abundant in the fluvial sandstones. The carbonate minerals show complex compositional and micro-structural variation of pure siderite (Sid I), Mg-siderite (Sid II), Fe-dolomite, ankerite and calcite, displaying decreasing Fe from early to late diagenetic carbonate cements. An early diagenetic origin for siderite and kaolinite is inferred from micro-structural relations, whereas pore filling calcite and ankerite formed during later diagenesis. The Fe-dolomite probably related to mixing-zone dolomitization from increasing marine influences, and a regional correlatable calcite cemented layer has been related to a flooding event. Porosity values in non-cemented sandstone samples are generally high in both FCH and SBF facies associations averaging 27%. Differential compaction between sandstone and mudstone has a ratio of up to 1:2 and with lower values for MBF. We emphasize the role of eogenetic siderite cementation in reducing compactability in the fine-grained, coal-bearing sediments most prominent in MBF facies. This has implications for modeling of differential compaction between sandstone and mudstones deposited in fluvial-deltaic environments.  相似文献   

14.
Geological evidence for overpressure is common worldwide, especially in petroleum-rich sedimentary basins. As a result of an increasing emphasis on unconventional resources, new data are becoming available for source rocks. Abnormally high values of pore fluid pressure are especially common within mature source rock, probably as a result of chemical compaction and increases in volume during hydrocarbon generation. To investigate processes of chemical compaction, overpressure development and hydraulic fracturing, we have developed new techniques of physical modelling in a closed system. During the early stages of our work, we built and deformed models in a small rectangular box (40 × 40 × 10 cm), which rested on an electric flatbed heater; but more recently, in order to accommodate large amounts of horizontal shortening, we used a wider box (77 × 75 × 10 cm). Models consisted of horizontal layers of two materials: (1) a mixture of equal initial volumes of silica powder and beeswax micro-spheres, representing source rock, and (2) pure silica powder, representing overburden. By submerging these materials in water, we avoided the high surface tensions, which otherwise develop within pores containing both air and liquids. Also we were able to measure pore fluid pressure in a model well. During heating, the basal temperature of the model surpassed the melting point of beeswax (∼62 °C), reaching a maximum of 90 °C. To investigate tectonic contexts of compression or extension, we used a piston to apply horizontal displacements.In experiments where the piston was static, rapid melting led to vertical compaction of the source layer, under the weight of overburden, and to high fluid overpressure (lithostatic or greater). Cross-sections of the models, after cooling, revealed that molten wax had migrated through pore space and into open hydraulic fractures (sills). Most of these sills were horizontal and their roofs bulged upwards, as far as the free surface, presumably in response to internal overpressure and loss of strength of the mixture. We also found that sills were less numerous towards the sides of the box, presumably as a result of boundary effects. In other experiments, in which the piston moved inward, causing compression of the model, sills also formed. However, these were thicker than in static models and some of them were subject to folding or faulting. For experiments, in which we imposed some horizontal shortening, before the wax had started to melt, fore-thrusts and back-thrusts developed across all of the layers near the piston, producing a high-angle prism. In contrast, as soon as the wax melted, overpressure developed within the source layer and a basal detachment appeared beneath it. As a result, thin-skinned thrusts propagated further into the model, producing a low-angle prism. In some experiments, bodies of wax formed imbricate zones within the source layer.Thus, in these experiments, it was the transformation, from solid wax to liquid wax, which led to chemical compaction, overpressure development and hydraulic fracturing, all within a closed system. According to the measurements of overpressure, load transfer was the main mechanism, but volume changes also contributed, producing supra-lithostatic overpressure and therefore tensile failure of the mixture.  相似文献   

15.
The Upper Jurassic marlstones (Mikulov Fm.) and marly limestones (Falkenstein Fm.) are the main source rocks for conventional hydrocarbons in the Vienna Basin in Austria. In addition, the Mikulov Formation has been considered a potential shale gas play. In this paper, organic geochemical, petrographical and mineralogical data from both formations in borehole Staatz 1 are used to determine the source potential and its vertical variability. Additional samples from other boreholes are used to evaluate lateral trends. Deltaic sediments (Lower Quarzarenite Member) and prodelta shales (Lower Shale Member) of the Middle Jurassic Gresten Formation have been discussed as secondary sources for hydrocarbons in the Vienna Basin area and are therefore included in the present study.The Falkenstein and Mikulov formations in Staatz 1 contain up to 2.5 wt%TOC. The organic matter is dominated by algal material. Nevertheless, HI values are relative low (<400 mgHC/gTOC), a result of organic matter degradation in a dysoxic environment. Both formations hold a fair to good petroleum potential. Because of its great thickness (∼1500 m), the source potential index of the Upper Jurrasic interval is high (7.5 tHC/m2). Within the oil window, the Falkenstein and Mikulov formations will produce paraffinic-naphtenic-aromatic low wax oil with low sulfur content. Whereas vertical variations are minor, limited data from the deep overmature samples suggest that original TOC contents may have increased basinwards. Based on TOC contents (typically <2.0 wt%) and the very deep position of the maturity cut-off values for shale oil/gas production (∼4000 and 5000 m, respectively), the potential for economic recovery of unconventional petroleum is limited. The Lower Quarzarenite Member of the Middle Jurassic Gresten Formation hosts a moderate oil potential, while the Lower Shale Member is are poor source rock.  相似文献   

16.
侵入砂体对深水油气勘探的研究意义   总被引：2，自引：0，他引：2  
侵入砂体是指深水沉积砂体在超压流体作用下侵入至上覆泥质沉积物中形成的砂体,它是深水盆地松散沉积物变形构造中常见的地质现象。侵入砂体由于其特殊的形成特点,可以明显改变原生沉积地层的几何形态和深水沉积物的物性参数,进而使储层复杂化,影响深水油气的勘探与开发,主要表现在:①侵入砂体改变了深水储层的性质及分布;②侵入砂体可能形成油气运移或散失的通道,并且改变了深水油气储层的垂向连通性;③大规模的侵入砂体本身也可以作为良好的油气储层;④侵入砂体的研究可以揭示未固结砂的流动机理,对于研究深水环境中广泛出现的浅水流的成因具有重要的借鉴意义。  相似文献   

17.
Natural fractures observed within the Lower Jurassic shales of the Cleveland Basin show evidence that pore pressure must have exceeded the lithostatic pressure in order to initiate horizontal fractures observed in cliff sections. Other field localities do not show horizontal fracturing, indicating lower pore pressures there. Deriving the burial history of the basin from outcrop, VR and heat-flow data gives values of sedimentation rates and periods of depositional hiatus which can be used to assess the porosity and pore pressure evolution within the shales. This gives us our estimate of overpressure caused by disequilibrium compaction alone, of 11 MPa, not sufficient to initiate horizontal fractures. However, as the thermal information shows us that temperatures were in excess of 95 °C, secondary overpressure mechanisms such as clay diagenesis and hydrocarbon generation occurred, contributing an extra 11 MPa of overpressure. The remaining 8.5 MPa of overpressure required to initiate horizontal fractures was caused by fluid expansion due to hydrocarbon generation and tectonic compression related to Alpine orogenic and Atlantic opening events. Where horizontal fractures are not present within the Lower Jurassic shales, overpressure was unable to build up as high due to proximity to the lateral draining of pressure within the Dogger Formation. The palaeopressure reconstruction techniques used within this study give a quick assessment of the pressure history of a basin and help to identify shales which may currently have enhanced permeability due to naturally-occurring hydraulic fractures.  相似文献   

18.
乌石凹陷是北部湾盆地的一个以下第三系沉积为主的生油凹陷。主要生油层流沙港组泥页岩生油指标高、厚度大、分布面积广,具有丰富的油气源;在早第三纪已形成的四个局部构造带为有利的油气聚集场所。凹陷东部流沙港组存在高压异常,而凹陷西部存在流沙港组与涠洲组两套烃源岩。  相似文献   

19.
Rapid supply and deposition of 1000's of meters of Miocene and Pliocene sediment tend to lead to a different set of controls on reservoir quality than older, more slowly buried sandstones. Here we have studied Miocene fluvial-deltaic Bhuban Formation sandstones, from the Surma Group, Bengal Basin, buried to >3,000 m and >110 °C, using a combination of petrographic, geochemical and petrophysical methods in order to understand the controls on Miocene sandstone reservoir quality to facilitate improved prediction of porosity and permeability. The main conclusions of the study are that mechanical compaction processes are the dominant control on porosity-loss although early calcite growth has led to locally-negligible porosity in some sandstones. Mechanical compaction occurred by grain rearrangement, ductile grain compaction and brittle grain fracturing. Calcite cement, occupying up to 41% intergranular volume, was derived from a combination of dissolved and recrystallized bioclasts, an influx of organic-derived carbon dioxide and plagioclase alteration. Clay minerals present include smectite-illite, kaolinite and chlorite. The smectitic clay was probably restricted to low energy depositional environments and it locally diminishes permeability disproportionate to the degree of porosity-loss. Kaolinite is probably the result of feldspar alteration resulting from the influx of organic-derived carbon dioxide. Quartz cement is present in small amounts, despite the relatively high temperature, due to a combination of limited time available in these young sandstones, grain-coating chlorite and low water saturations in these gas-bearing reservoir sandstones. Reservoir quality can now be predicted by considering primary sediment supply and primary depositional environment, the magnitude of the detrital bioclast fraction and the influx of organic-derived carbon dioxide.  相似文献   

20.
Three bitumen fractions were obtained and systematically analysed for the terpane and sterane composition from 30 Paleozoic source rocks and 64 bitumen-containing reservoir rocks within the Upper Sinian, Lower Cambrian, Lower Silurian, Middle Carboniferous, Upper Permian and Lower Triassic strata in the Sichuan Basin and neighbouring areas, China. These bitumen fractions include extractable oils (bitumen I), oil-bearing fluid inclusions and/or closely associated components with the kerogen or pyrobitumen/mineral matrix, released during kerogen or pyrobitumen isolation and demineralization (bitumen II), and bound compounds within the kerogen or pyrobitumen released by confined pyrolysis (bitumen III). In addition, atomic H/C and O/C ratios and carbon isotopic compositions of kerogen and pyrobitumen from some of the samples were measured. Geochemical results and geological information suggest that: (1) in the Central Sichuan Basin, hydrocarbon gases in reservoirs within the fourth section of the Upper Sinian Dengying Formation were derived from both the Lower Cambrian and Upper Sinian source rocks; and (2) in the Eastern Sichuan Basin, hydrocarbon gases in Middle Carboniferous Huanglong Formation reservoirs were mainly derived from Lower Silurian source rocks, while those in Upper Permian and Lower Triassic reservoirs were mainly derived from both Upper Permian and Lower Silurian marine source rocks. For both the source and reservoir rocks, bitumen III fractions generally show relatively lower maturity near the peak oil generation stage, while the other two bitumen fractions show very high maturities based on terpane and sterane distributions. Tricyclic terpanes evolved from the distribution pattern C20 < C21 < C23, through C20 < C21 > C23, finally to C20 > C21 > C23 during severe thermal stress. The concentration of C30 diahopane in bitumen III (the bound components released from confined pyrolysis) is substantially lower than in the other two bitumen fractions for four terrigenous Upper Permian source rocks, demonstrating that this compound originated from free hopanoid precursors, rather than hopanoids bound to the kerogen.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号