首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 156 毫秒
1.
There has been a revival in hydrocarbon source rock characterization and development associated with growing interest in unconventional resources, where these fine-grained organic-rich rocks act as both source and reservoir. To-date, the exploration focus on shale reservoirs has been largely on marine systems. Lacustrine source rocks for conventional resources are geographically important, dominating regions such as China, Indonesia, and Brazil's resource-base. However, they have been generally untested for unconventional resources.There are a number of key differences in the nature of these hydrocarbon systems that should be considered when assessing whether lacustrine systems may represent future unconventional opportunities in areas where the conventional resource-base is dominated by lacustrine-sourced oil. Among the key differences between these depositional systems is the greater sensitivity to high frequency climatic variability within lacustrine systems. Lacustrine systems are highly sensitive to changes in the balance between precipitation and evaporation, which may lead to rapid changes in lake level, potentially exceeding 600 m. These changes in depositional conditions are geologically rapid and may occur over periods of thousands of years. Such changes can reduce the areal extent of potentially thick source rock intervals to only those portions of a basin where a permanent deep lake was present. Thus the core unconventional target area may be geographically limited compared with their marine counterpart. Although potentially areally limited, a review of many lacustrine source rocks suggests that their thicknesses are often significantly greater than marine source rocks. An examination of the more distal portions of lacustrine systems, where better source rock potential is present reveals that there is generally limited connectivity between source and conventional reservoir. In these settings, such as the Wind River basin (Waltman Shale), the hydrocarbons remain trapped within the shales, potentially leading to over-pressured hydrocarbon charged systems. Such conditions suggest that although areally limited, viable unconventional targets may exist, if suitable reservoir conditions are present. Finally, the character of the oils produced is different in these settings, with lacustrine oils being waxy and displaying different hydrocarbon generation and cracking kinetics. High wax oils display distinct flow characteristics, being more viscous, and may offer different production challenges than their non-waxy marine equivalents. Additionally, differences in their cracking kinetics may indicate that the timing of gas generation for shale gas plays may differ significantly from marine systems.  相似文献   

2.
The Alpine Foreland Basin is a minor oil and moderate gas province in central Europe. In the Austrian part of the Alpine Foreland Basin, oil and minor thermal gas are thought to be predominantly sourced from Lower Oligocene horizons (Schöneck and Eggerding formations). The source rocks are immature where the oil fields are located and enter the oil window at ca. 4 km depth beneath the Alpine nappes indicating long-distance lateral migration. Most important reservoirs are Upper Cretaceous and Eocene basal sandstones.Stable carbon isotope and biomarker ratios of oils from different reservoirs indicate compositional trends in W-E direction which reflect differences in source, depositional environment (facies), and maturity of potential source rocks. Thermal maturity parameters from oils of different fields are only in the western part consistent with northward displacement of immature oils by subsequently generated oils. In the eastern part of the basin different migration pathways must be assumed. The trend in S/(S + R) isomerisation of ααα-C29 steranes versus the αββ (20R)/ααα (20R) C29 steranes ratio from oil samples can be explained by differences in thermal maturation without involving long-distance migration. The results argue for hydrocarbon migration through highly permeable carrier beds or open faults rather than relatively short migration distances from the source. The lateral distance of oil fields to the position of mature source rocks beneath the Alpine nappes in the south suggests minimum migration distances between less than 20 km and more than 50 km.Biomarker compositions of the oils suggest Oligocene shaly to marly successions (i.e. Schoeneck, Dynow, and Eggerding formations) as potential source rocks, taking into account their immature character. Best matches are obtained between the oils and units a/b (marly shale) and c (black shale) of the “normal” Schöneck Formation, as well as with the so-called “Oberhofen Facies”. Results from open system pyrolysis-gas chromatography of potential source rocks indicate slightly higher sulphur content of the resulting pyrolysate from unit b. The enhanced dibenzothiophene/phenanthrene ratios of oils from the western part of the basin would be consistent with a higher contribution of unit b to hydrocarbon expulsion in this area. Differences in the relative contribution of sedimentary units to oil generation are inherited from thickness variations of respective units in the overthrusted sediments. The observed trend towards lighter δ13C values of hydrocarbon fractions from oil fields in a W-E direction are consistent with lower δ13C values of organic matter in unit c.  相似文献   

3.
Two large oil fields (QHD32-6 and QHD33-1), located in the middle part of the Shijiutuo Uplift, have generally suffered mild biodegradation. Based on multivariate statistical analysis of the biomarker parameters, this study discussed the origin and charging directions for these two oil fields.In contrast to Ed3-derived oil, all available oil samples from these two large oil fields displayed low C19/C23, C24/C26 and high G/H and 4-MSI, which are attributed to the mixtures of oils derived from the Shahejie (Es1 and Es3) source rocks. Oils in QHD32-6, which contain relatively more Es3-derived oil, are called Group I oils, and most oils in QHD33-1, which share relatively more Es1-derived oil, are called Group II oils. Our mixed oil experiments reveal the predominant Es3- and Es1-derived oil contribution for Group I and Group II oil groups, respectively; however, the selection of end member oils warrants further research.Based on comparisons of biomarker parameters, the QHD32-6 oil field was mainly charged in the north by oil generated from Shahejie formation source rocks in the Bozhong depression. However, oils from the north of QHD32-6 field display a remarkable difference to the oils in the south of this field, which may indicate that a charging pathway exists from the QHD33-1 field. Considering the variations in biomarker compositions in the west to -east and northwest to -southeast sections across the QHD33-1 and QHD32-6 oil fields, it can be deduced that Es3-sourced oil migrated westward to the QHD32-6 traps, and then charging by Es1 oil from the Bozhong Sag resulted in the QHD33-1 oil field being characterized by the mixture of Es3- and Es1-sourced oil. Moreover, migration of Es1-derived oil from the Qinnan Sag was not identified, implying that the QHD33-1 oil field is mainly charged from the northeast of the Bozhong Sag.  相似文献   

4.
The Penglai 9-1 (PL9-1) oil field, which contains China's third largest offshore oil accumulation (in-place reserves greater than 2.28 × 108 ton or 1.49 × 109 bbl), was found in shallow reservoirs (700–1700 m, 2297–5577 ft) within the most active fault zone in east China. The PL9-1 field contains two oil-bearing series, the granite intrusions in Mesozoic (Mz) and both the sandstone reservoirs in Neogene Guantao (Ng) and Neogene Minghuazhen (Nm) Formation. The origins of the PL9-1 field, both in terms of source rock intervals and generative kitchens, were determined by analyzing biomarker distributions for 61 source rock samples and 33 oil samples. The Mesozoic granite intrusions, which hold more than 80% of the oil reserves in the field, were charged in the west by oil generated from the third member (Es3) of the Shahejie Formation in the Bodong depression. The Neogene reservoirs of the PL9-1 field were charged in the west by oil generated from the third member (Es3) of the Shahejie Formation in the Bodong depression and in the south by oil generated from the first member (Es1) of the Shahejie Formation in the Miaoxibei depression. Interactive contact between the large fan delta and the mature source rocks residing in the Es3 Formation of the Bodong depression resulted in a high expulsion efficiency from the source rocks and rapid oil accumulation in the PL9-1 field, which probably explains how can this large oil field accumulate and preserve within the largest and most active fault zone in east China.  相似文献   

5.
通王断裂带沙河街组油气成藏主控因素研究   总被引：1，自引：0，他引：1  
通王断裂带地区位于济阳坳陷东营凹陷南斜坡东部，沙河街组是本区的主要含油层系。通过烃源岩分析、储集层类型划分、孔隙流体动力场的描述、优质输导体系类型及断裂构造特征的研究，认为牛庄洼陷烃源岩主要为沙四上和沙三段深湖相一半深湖相暗色泥岩、油页岩，油气以生油洼陷为中心，呈环状或半环状分布；沙三段大型三角洲相储集砂体、沙四段中上部的滨浅湖近岸砂坝、远岸砂坝和席状砂岩储层是主要储集层类型；砂体一断层类输导体系是本区优质输导体系，牛庄洼陷北部发育的高压型复式温压系统，使油气顺着断层、砂体向南部通王断裂带常压常温和常压高温区运移。通王断裂带的油气藏主要是受断裂控制的构造油气藏，王家岗油田往西的中浅层是断层类油藏的有利地区，王家岗地区北部和陈官庄地区的西北部，是沙三段隐蔽油气藏以及断层-岩性复合型油气藏勘探的有利勘探地区。  相似文献   

6.
The Ordovician is the most important exploration target in the Tabei Uplift of the Tarim Basin, which contains a range of petroleum types including solid bitumen, heavy oil, light oil, condensate, wet gas and dry gas. The density of the black oils ranges from 0.81 g/cm3 to 1.01 g/cm3 (20 °C) and gas oil ratio (GOR) ranges from 4 m3/m3 to 9300 m3/m3. Oil-source correlations established that most of the oils were derived from the Mid-Upper Ordovician marine shale and carbonate and that the difference in oil properties is mainly attributed to hydrocarbon alteration and multi-stage accumulation. In the Tabei Uplift, there were three main periods of hydrocarbon accumulation in the late Caledonian stage (ca. 450–430 Ma), late Hercynian stage (ca. 293–255 Ma) and the late Himalayan stage (ca. 12–2 Ma). The oil charging events mainly occurred in the late Caledonian and late Hercynian stage, while gas charging occurred in the late Hercynian stage. During the late Caledonian stage, petroleum charged the reservoirs lying east of the uplift. However, due to a crustal uplifting episode in the early Hercynian (ca. 386–372 Ma), most of the hydrocarbons were transformed by processes such as biodegradation, resulting in residual solid bitumen in the fractures of the reservoirs. During the late Hercynian Stage, a major episode of oil charging into Ordovician reservoirs took place. Subsequent crustal uplift and severe alteration by biodegradation in the west-central Basin resulted in heavy oil formation. Since the late Himalayan stage when rapid subsidence of the crust occurred, the oil residing in reservoirs was exposed to high temperature cracking conditions resulting in the production of gas and charged from the southeast further altering the pre-existing oils in the eastern reservoirs. A suite of representative samples of various crude oils including condensates, lights oils and heavy oils have been collected for detailed analysis to investigate the mechanism of formation. Based on the research it was concluded that the diversity of hydrocarbon physical and chemical properties in the Tabei Uplift was mainly attributable to the processes of biodegradation and gas washing. The understanding of the processes is very helpful to predict the spatial distribution of hydrocarbon in the Tabei Uplift and provides a reference case study for other areas.  相似文献   

7.
The Yuqi block is an important area for oil and gas exploration in the northern Akekule uplift, Tarim Basin, northwestern China. The Upper Triassic Halahatang Formation (T3h) within the Yuqi block can be subdivided into a lowstand system tract (LST), a transgressive system tract (TST), and a highstand system tract (HST), based on a study of initial and maximum flood surfaces. Oil in the lowstand system tract of the Halahatang Formation is characterized by medium to lightweight (0.8075 g/cm3–0.9258 g/cm3), low sulfur content (0.41%–1.4%), and high paraffin content (9.65%–10.25%). The distribution of oil and gas is principally controlled by low-amplitude anticlines and faults. Based on studies of fluorescence thin sections and homogenization temperatures of fluid inclusions, reservoirs in the T3h were formed in at least two stages of hydrocarbon charge and accumulation. During the first stage (Jurassic–Cretaceous) both the structural traps and hydrocarbon reservoirs were initiated; during the second stage (Cenozoic) the structural traps were finally formed and the reservoirs were structurally modified. The reservoir-forming mechanism involved external hydrocarbon sources (i.e. younger reservoirs with oil and gas sourced from old rocks), two directions (vertical and lateral) of expulsion, and multi-stage accumulation. This model provides a theoretical fundament for future oil and gas exploration in the Tarim Basin and other similar basins in northwestern China.  相似文献   

8.
The deeply buried reservoirs (DBRs) from the Lijin, Shengtuo and Minfeng areas in the northern Dongying Depression of the Bohai Bay Basin, China exhibit various petroleum types (black oil-gas condensates) and pressure systems (normal pressure-overpressure) with high reservoir temperatures (154–185 °C). The pressure-volume-temperature-composition (PVTX) evolution of petroleum and the processes of petroleum accumulation were reconstructed using integrated data from fluid inclusions, stable carbon isotope data of natural gas and one-dimensional basin modeling to trace the petroleum accumulation histories.The results suggest that (1) the gas condensates in the Lijin area originated from the thermal cracking of highly mature kerogen in deeper formations. Two episodes of gas condensate charging, which were evidenced by the trapping of non-fluorescent gas condensate inclusions, occurred between 29-25.5 Ma and 8.6–5.0 Ma with strong overpressure (pressure coefficient, Pc = 1.68–1.70), resulting in the greatest contribution to the present-day gas condensate accumulation; (2) the early yellow fluorescent oil charge was responsible for the present-day black oil accumulation in well T764, while the late blue-white oil charge together with the latest kerogen cracked gas injection resulted in the present-day volatile oil accumulation in well T765; and (3) the various fluorescent colors (yellow, blue-white and blue) and the degree of bubble filling (Fv) (2.3–72.5%) of the oil inclusions in the Minfeng area show a wide range of thermal maturity (API gravity ranges from 30 to 50°), representing the charging of black oil to gas condensates. The presence of abundant blue-white fluorescent oil inclusions with high Grain-obtaining Oil Inclusion (GOI) values (35.8%, usually >5% in oil reservoirs) indicate that a paleo-oil accumulation with an approximate API gravity of 39–40° could have occurred before 25 Ma, and gas from oil cracking in deeper formations was injected into the paleo-oil reservoir from 2.8 Ma to 0 Ma, resulting in the present-day gas condensate oil accumulation. This oil and gas accumulation model results in three oil and gas distribution zones: 1) normal oil reservoirs at relatively shallow depth; 2) gas condensate reservoirs that originated from the mixture of oil cracking gas with a paleo-oil reservoir at intermediate depth; and 3) oil-cracked gas reservoirs at deeper depth.The retardation of organic matter maturation and oil cracking by high overpressure could have played an important role in the distribution of different origins of gas condensate accumulations in the Lijin and Minfeng areas. The application of oil and gas accumulation models in this study is not limited to the Dongying Depression and can be applied to other overpressured rift basins.  相似文献   

9.
西湖凹陷目前已发现的油气层主要集中在平湖组和花港组储层之中。平湖组主力烃源岩的有机质类型以Ⅲ型为主,主要形成气藏（含凝析气藏）和轻质油藏,其具有流动性强、极易挥发等特点,烃类损失较大。通过目前应用的几种录井技术来看,泥浆综合气测录井能较好的识别油气层,通过对C1参数的矫正能够很好的识别出油气显示层,根据各气测参数的特征变化,并能对油气层的性质进行初步的较准确评价。地化录井、定量荧光录井由于受到烃类损失大的影响,在对油气层识别及评价中不及气测录井敏感。  相似文献   

10.
The quality of source rocks plays an important role in the distribution of tight and conventional oil and gas resources. Despite voluminous studies on source rock hydrocarbon generation, expulsion and overpressure, a quality grading system based on hydrocarbon expulsion capacity is yet to be explored. Such a grading system is expected to be instrumental for tight oil and gas exploration and sweet spot prediction. This study tackles the problem by examining Late Cretaceous, lacustrine source rocks of the Qingshankou 1 Member in the southern Songliao Basin, China. By evaluating generated and residual hydrocarbon amounts of the source rock, the extent of hydrocarbon expulsion is modelled through a mass balance method. The overpressure is estimated using Petromod software. Through correlation between the hydrocarbon expulsion and source rock evaluation parameters [total organic carbon (TOC), kerogen type, vitrinite reflectance (Ro) and overpressure], three classes of high-quality, effective and ineffective source rocks are established. High-quality class contains TOC >2%, type-I kerogen, Ro >1.0%, overpressure >7Mpa, sharp increase of hydrocarbon expulsion along with increasing TOC and overpressure, and high expulsion value at Ro >1%. Source rocks with TOC and Ro <0.8%, type-II2 & III kerogen, overpressure <3Mpa, and low hydrocarbon expulsion volume are considered ineffective. Rocks with parameters between the two are considered effective. The high-quality class shows a strong empirical control on the distribution of tight oil in the Songliao Basin. This is followed by the effective source rock class. The ineffective class has no measurable contribution to the tight oil reserves. Because the hydrocarbon expulsion efficiency of source rocks is controlled by many factors, the lower limits of the evaluation parameters in different basins may vary. However, the classification method of tight source rocks proposed in this paper should be widely applicable.  相似文献   

11.
The Es3L (lower sub-member of the third member of the Eocene Shahejie Formation) shale in the Jiyang Depression is a set of relatively thick and widely deposited lacustrine sediments with elevated organic carbon, and is considered to be one of the most important source rocks in East China. We can determine the mineralogy, organic and inorganic geochemistry of the Es3L shale and calculate paleoclimate indexes by using multiple geochemical proxies based on organic chemistry (total organic carbon [TOC] and Rock-Eval pyrolysis), major and trace elements, X-Ray diffraction, and carbon and oxygen isotope data from key wells alongside ECS (Elemental Capture Spectroscopy) well log data. These indicators can be used to analyze the evolution of the paleoenvironment and provide a mechanism of organic matter (OM) accumulation. The Es3L oil shale has high TOC abundance (most samples >3.0%) and is dominated by Type I kerogens. Additionally, the organic-rich shale is rich in CaO and enrichment in some trace metals is present, such as Sr, Ba and U. The positive δ13C and negative δ18O values, high Sr/Ba, B/Ga and Ca/Ca + Fe ratios and low C/S ratios indicate that the Es3L shales were mainly deposited in a semi-closed freshwater-brackish water lacustrine environment. The consistently low Ti/Al and Si/Al ratios reflect a restricted but rather homogeneous nature for the detrital supply. Many redox indicators, including the Th/U, V/(V + Ni), and δU ratios, pyrite morphology and TOC-TS-Fe diagrams suggest deposition under dysoxic to suboxic conditions. Subsequently, the brackish saline bottom water evolved into an anoxic water body under a relatively arid environment, during which organic-lean marls were deposited in the early stage. Later, an enhanced warm-humid climate provided an abundant mineral nutrient supply and promoted the accumulation of algal material. OM input from algal blooms reached a maximum during the deposition of the organic-rich calcareous shale with seasonal laminations. High P/Ti ratios and a strongly positive relationship between the P and TOC contents indicate that OM accumulation in the oil shale was mainly controlled by the high primary productivity of surface waters with help from a less stratified water column. Factors such as the physical protection of clay minerals and the dilution of detrital influx show less influence on OM enrichment.  相似文献   

12.
Thirty-six Silurian core and cuttings samples and 10 crude oil samples from Ordovician reservoirs in the NC115 Concession, Murzuq Basin, southwest Libya were studied by organic geochemical methods to determine source rock organic facies, conditions of deposition, thermal maturity and genetic relationships. The Lower Silurian Hot Shale at the base of the Tanezzuft Formation is a high-quality oil/gas-prone source rock that is currently within the early oil maturity window. The overall average TOC content of the Hot Shale is 7.2 wt% with a maximum recorded value of 20.9 wt%. By contrast, the overlying deposits of the Tanezzuft Formation have an average TOC of 0.6 wt% and a maximum value of 1.1 wt%. The organic matter in the Hot Shale consists predominantly of mixed algal and terrigenous Type-II/III kerogen, whereas the rest of the formation is dominated by terrigenous Type-III organic matter with some Type II/III kerogen. Oils from the A-, B- and H-oil fields in the NC115 Concession were almost certainly derived from marine shale source rocks that contained mixed algal and terrigenous organic input reflecting deposition under suboxic to anoxic conditions. The oils are light and sweet, and despite being similar, were almost certainly derived from different facies and maturation levels within mature source rocks. The B-oils were generated from slightly less mature source rocks than the others. Based on hierarchical cluster analysis (HCA), principal component analysis (PCA), selected source-related biomarkers and stable carbon isotope ratios, the NC115 oils can be divided into two genetic families: Family-I oils from Ordovician Mamuniyat reservoirs were probably derived from older Palaeozoic source rocks, whereas Family-II oils from Ordovician Mamuniyat–Hawaz reservoirs were probably charged from a younger Palaeozoic source of relatively high maturity. A third family appears to be a mixture of the two, but is most similar to Family-II oils. These oil families were derived from one proven mature source rock, the Early Silurian, Rhuddanian Hot Shale. There is a good correlation between the Family-II and -III oils and the Hot Shale based on carbon isotope compositions. Saturated and aromatic maturity parameters indicate that these oils were generated from a source rock of considerably higher maturity than the examined rock samples. The results imply that the oils originated from more mature source rocks outside the NC115 Concession and migrated to their current positions after generation.  相似文献   

13.
As shale oil occurs primarily in micro–nano pores and fractures, research about the effect of pore structure on shale oil accumulation has great significance for shale oil exploration and development. The effect of pore structure on shale oil accumulation in the lower third member of the Shahejie formation (Es3l), Zhanhua Sag, eastern China was investigated using gas adsorption, soxhlet extraction, nuclear magnetic resonance (NMR) analysis, and field emission scanning electron microscope (FE-SEM) observation. The results indicated that the samples contained a larger amount of ink-bottle-shaped and slit-shaped pores after extraction than before extraction. The pore volume and specific surface area of the samples were approximately 2.5 times larger after extraction than before extraction. Residual hydrocarbon occurred primarily in the free-state form in pores with diameters of 10–1000 nm, which can provide sufficient pore volume for free hydrocarbon accumulation. Therefore, pores with diameters of 10–1000 nm were regarded as “oil-enriched pores”, which are effective pores for shale oil exploration, whereas pores with diameters smaller than 10 nm were regarded as “oil-ineffective pores”. Samples with only well-developed small pores with diameters smaller than 1000 nm showed high oil saturation, whereas samples with both small pores and also relatively large pores and micro-fractures presented low oil saturation. As the minimum pore size allowing fluid expulsion is 1000 nm, pores with diameters greater than 1000 nm were considered as “oil-percolated pores”. Large pores and micro-fractures are generally interconnected and may even form a complex fracture mesh, which greatly improves the permeability of shale reservoirs and is beneficial to fluid discharge.  相似文献   

14.
Several exploration wells have intersected a Cenozoic coal-bearing, fluvial-deltaic mudstone and sandstone succession in the northeastern Vietnamese part of the Malay Basin, and have successfully tested seismically identified direct hydrocarbon indicators (DHIs). The oil and gas/condensate discovery well 46-CN-1x encountered a ∼55 m thick section of lacustrine mudstones having considerable potential as an oil source. Vitrinite reflectance (VR) measurements from these alginite-bearing rocks introduce several problems in thermal maturity evaluation, including associated VR suppression and delineation of cavings and bitumens. Reliable thermal maturity gradients, however, may be established using a combination of conventional VR measurements and ‘equivalent VR’ (EqVR) values derived from the fluorescence alteration of multiple macerals (FAMM) technique. These measurements, performed on dispersed organic matter (DOM) in cuttings from 46-CN-1x, allow separation of low-reflecting bitumens and vitrinite in cavings from indigenous vitrinite and the FAMM results indicate VR suppression of 0.14% in an alginite-bearing mudstone with a high Hydrogen Index value. On the basis of available ‘raw’ VR data, a highly irregular maturity trend is determined, with the deepest sample (2675–2680 m) having a VR of ∼0.4%Ro. The EqVR value, however, for the deepest sample is 0.70%. The maturity trend determined from the FAMM data (and VR data, omitting samples having suppressed VR) indicates that the top of the oil window (VR of 0.75%Ro) is located at about 2800 m depth. Modelling the geothermal gradient using the EASY%Ro algorithm yields ∼40 °C/km for both of the two maturity profiles; this is in the low end of the range for the Malay Basin. Modelled temperature histories indicate onset of hydrocarbon generation for the uppermost Oligocene source rocks between 2 Ma and present-day, which post-dates trap formation. Seismic facies patterns suggest that lacustrine oil-prone units are in the oil window in the same graben complex a few km NW of the investigated well, and these rocks are likely to be the source of the hydrocarbons found in the well. A more widespread occurrence of hydrocarbons sourced from this kitchen is indicated by other discoveries and mapping of DHIs in the area.  相似文献   

15.
The Shijiutuo uplift is an oil enriched uplift in the offshore Bohai Bay Basin. Petroleum migration is a key factor for oil enrichment in Neogene reservoirs far away from the hydrocarbon kitchen. In this article, an integration of geological, geophysical and geochemical analyses are employed to investigate the petroleum migration and accumulation on the Shijiutuo uplift. Hydrocarbons in the QHD32-6 and QHD33 oilfields are mainly originated from the third (E2s3) and first (E2s1) member of the Shahejie Formation. The shallow traps have significant contributions of late-stage E2s1-derived oil. Lateral petroleum migration is a major mechanism forming large oilfields on the Shijiutuo uplift. The large oilfields have multiple hydrocarbon kitchens, multiple source rocks, and numerous preferential petroleum migration pathways (PPMPs). Once petroleum arrives at the structural highs on the Shijiutuo uplift through the Guantao Formation (N1g) carrier-beds, neotectonic faults cutting through Guantao (N1g) and Minghuazhen (N1mL) formations could serve as effective conduits for vertical petroleum migration. Neotectonic faults have experienced polycyclic fault activities. Fluid inclusions indicate episodic hydrocarbon charging. Crude oils display duplex properties of biodegradation and non-biodegradation, which is strong evidence for multiple and episodic oil charging on the Shijiutuo uplift. Finally, episodic petroleum charging along polycyclic neotectonic faults causes the late-stage E2s1-derived oils to occur in the shallow reservoirs.  相似文献   

16.
In the Chelif basin, the geochemical characterization reveals that the Upper Cretaceous and Messinian shales have a high generation potential. The former exhibits fair to good TOC values ranging from 0.5 to 1.2% with a max. of 7%. The Messinian series show TOC values comprised between 0.5 and 2.3% and a high hydrogen index (HI) with values up to 566 mg HC/g TOC. Based on petroleum geochemistry (CPLC and CPGC) technics, the oil-to source correlation shows that the oil of the Tliouanet field display the same signature as extracts from the Upper Cretaceous source rocks (Cenomanian to Campanian). In contrast, oil from the Ain Zeft field contains oleanane, and could thus have been sourced by the Messinian black shale or older Cenozoic series. Two petroleum systems are distinguished: Cretaceous (source rock) – middle to upper Miocene (reservoirs) and Messinian (source rock)/Messinian (reservoirs). Overall, the distribution of Cretaceous-sourced oil in the south, directly connected with the surface trace of the main border fault of the Neogene pull-apart basin, rather suggests a dismigration from deeper reservoirs located in the parautochthonous subthrust units or in the underthrust foreland, rather than from the Tellian allochthon itself (the latter being mainly made up of tectonic mélange at the base, reworking blocks and slivers of Upper Cretaceous black shale and Lower Miocene clastics). Conversely, the occurrence of Cenozoic-sourced oils in the north suggests that the Neogene depocenters of the Chelif thrust-top pull-apart basin reached locally the oil window, and therefore account for a local oil kitchen zone. In spite of their limited extension, allochthonous Upper cretaceous Tellian formations still conceal potential source rock layers, particularly around the Dahra Mountains and the Tliouanet field. Additionally they are also recognized by the W11 well in the western part of the basin (Tahamda). The results of the thermal modelling of the same well shows that there is generation and migration of oil from this source rock level even at recent times (since 8 Ma), coevally with the Plio-Quaternary traps formation. Therefore, there is a possibility of an in-situ oil migration and accumulation, even from Tellian Cretaceous units, to the recent structures, like in the Sedra structure. However, the oil remigration from deep early accumulations into the Miocene reservoirs is the most favourable case in terms of hydrocarbon potential of the Chelif basin.  相似文献   

17.
Ever since a breakthrough of marine shales in China, lacustrine shales have been attracting by the policy makers and scientists. Organic-rich shales of the Middle Jurassic strata are widely distributed in the Yuqia Coalfield of northern Qaidam Basin. In this paper, a total of 42 shale samples with a burial depth ranging from 475.5 m to 658.5 m were collected from the Shimengou Formation in the YQ-1 shale gas borehole of the study area, including 16 samples from the Lower Member and 26 samples from the Upper Member. Geochemistry, reservoir characteristics and hydrocarbon generation potential of the lacustrine shales in YQ-1 well were preliminarily investigated using the experiments of vitrinite reflectance measurement, maceral identification, mineralogical composition, carbon stable isotope, low-temperature nitrogen adsorption, methane isothermal adsorption and rock eval pyrolysis. The results show that the Shimengou shales have rich organic carbon (averaged 3.83%), which belong to a low thermal maturity stage with a mean vitrinite reflectance (Ro) of 0.49% and an average pyrolytic temperature of the generated maximum remaining hydrocarbon (Tmax) of 432.8 °C. Relative to marine shales, the lacustrine shales show low brittleness index (averaged 34.9) but high clay contents (averaged 55.1%), high total porosities (averaged 13.71%) and great Langmuir volumes (averaged 4.73 cm−3 g). Unlike the marine and marine-transitional shales, the quartz contents and brittleness index (BI) values of the lacustrine shales first decrease then increase with the rising TOC contents. The kerogens from the Upper Member shales are dominant by the oil-prone types, whereas the kerogens from the Lower Member shales by the gas-prone types. The sedimentary environment of the shales influences the TOC contents, thus has a close connection with the hydrocarbon potential, mineralogical composition, kerogen types and pore structure. Additionally, in terms of the hydrocarbon generation potential, the Upper Member shales are regarded as very good and excellent rocks whereas the Lower Member shales mainly as poor and fair rocks. In overall, the shales in the top of the Upper Member can be explored for shale oil due to the higher free hydrocarbon amount (S1), whereas the shales in the Lower Member and the Upper Member, with the depths greater than 1000 m, can be suggested to explore shale gas.  相似文献   

18.
The Niudong Buried Hill Field, which lies in the Baxian Depression of the Bohai Bay Basin, is the deepest oil/gas accumulation in eastern China. Its Precambrian dolomite reservoir occurs at burial depths of 5860 m–6027 m. This paper attempts to document the hydrocarbon charging and accumulation history in this field, which could greatly enhance the understanding of the mechanisms for the formation of deep hydrocarbon accumulations. Our previous study of oil trapped in fluid inclusions has demonstrated that the ratio parameters of the fluorescence spectral intensities at 425 nm and 433 nm (Q425/433 ratio), and at 419 nm and 429 nm (Q419/429 ratio) can be more effective for revealing hydrocarbon charging history than the previously-used fluorescence parameters such as Lambda max and red/green quotient as well as fluorescence colors. The hydrocarbon charging and accumulation history in the Niudong Buried Hill Field was studied with an integrated approach involving the application of these two spectral parameters of petroleum inclusion fluorescence as well as utilization of other data including homogenization temperatures of aqueous inclusions coeval with petroleum inclusions, and cross-cutting relationships of cements and “oil veins” in pores and fractures. The results indicate that the dolomite reservoir in the Niudong Buried Hill Field experienced three episodes of hydrocarbon charging. In the first two episodes (between 38.5Ma and 25Ma), the low mature and mature oils, which were derived from source rocks in the Sha-4 Member of the Eocene Shahejie Formation, migrated into the reservoir, but part of them leaked out due to normal faulting at the updip margin of the buried hill. These early-charged oils were preserved mainly in small pores in micritic dolomites by oil-wettability and capillary pressure. In the Neogene, the basin subsided as a whole and local faults at the updip margin became inactive and played a sealing role. By approximately 13Ma, the source rocks became highly mature and the generated hydrocarbons then migrated into the reservoir and accumulated. Therefore, the last charging is the most important for hydrocarbon accumulation in the Niudong Buried Hill Field.  相似文献   

19.
Large to middle-scale thrust structures are important reservoir plays for coal-derived hydrocarbons in the foreland basins of NW China, with both gas and some accompanying oil. In the Dabei Gas Field of the Kuqa Thrust, however, the oil and gas pools are vertically distributed in a quite unique way: (1) liquid oil and some dissolved gas are present in the Dawanqi Anticline with the reservoir at 300-700 m depth, forming the only oil field in the Kuqa Thrust; (2) gas and minor accompanying oil are found in the deep reservoir of the Dabei-1 and Dabei-2 thrust traps around 5000-6000 m depth; (3) an extremely dry gas pool is found in the Dabei-3 thrust trap where the depth of the reservoir is over 7000 m. Geochemical data suggest that the hydrocarbons in the Dawanqi Anticline and the Dabei thrust traps originated from a similar source, i.e. the underlying Jurassic coal measures, with some contribution from Jurassic lacustrine shales. The Jurassic source rocks did not start to generate oil until the Miocene (around the Kangcun Stage), and extended into the Pliocene (the Kuche Stage) with the main gas generation period in the Pliocene (the Kuche Stage) and the Quaternary. Because the traps formed relatively early, the Dabei-1 and Dabei-2 thrusts could trap some of the early generated oils, but most of the early charged oil was redistributed to the shallower Dawanqi Anticline during the Kuche Stage. The Dabei-3 thrust trap formed concurrently with major gas generation and thus could not trap liquid hydrocarbons. The difference in the vertical distribution of the hydrocarbon accumulations in the Dabei Gas Field resulted from a complex interplay of source variability, structural evolution of the basin and thermal maturation.  相似文献   

20.
The Dniepr-Donets Basin (DDB) hosts a multi-source petroleum system with more than 200 oil and gas fields, mainly in Carboniferous clastic rocks. Main aim of the present study was to correlate accumulated hydrocarbons with the most important source rocks and to verify their potential to generate oil and gas. Therefore, molecular and isotopic composition as well as biomarker data obtained from 12 oil and condensate samples and 48 source rock extracts was used together with USGS data for a geological interpretation of hydrocarbon charging history.Within the central DDB, results point to a significant contribution from (Upper) Visean black shales, highly oil-prone as well as mixed oil- and gas-prone Serpukhovian rocks and minor contribution from an additional Tournaisian source. Devonian rocks, an important hydrocarbon source within the Pripyat Trough, have not been identified as a major source within the central DDB. Additional input from Bashkirian to Moscovian (?) (Shebelinka Field) as well as Tournaisian to Lower Visean rocks (e.g. Dovgal Field) with higher contents of terrestrial organic matter is indicated in the SE and NW part, respectively.Whereas oil–source correlation contradicts major hydrocarbon migration in many cases for Tournaisian to Middle Carboniferous reservoir horizons, accumulations within Upper Carboniferous to Permian reservoirs require vertical migration up to 4000 m along faults related to Devonian salt domes.1-D thermal models indicate hydrocarbon generation during Permo-Carboniferous time. However, generation in coal-bearing Middle Carboniferous horizons in the SE part of the basin may have occurred during the Mesozoic.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号