共查询到20条相似文献，搜索用时 62 毫秒
1.
柔性水囊潜堤由橡胶制成，内部充水，具有结构简单、造价低廉等优点，能较好满足人工岛、跨海桥梁、海洋平台等基础设施建设工程对简单便携、拆装方便的临时防波堤的需求。为了探究柔性水囊潜堤的消波特性，在溃坝水槽内开展溃坝波与半圆柱形柔性水囊潜堤相互作用的试验研究，重点探究柔性水囊潜堤与溃坝波相互作用过程中水位变化特性，并与半圆柱刚性潜堤的性能进行比较；同时分析柔性水囊潜堤内部初始水压和浸没深度等参数对其消波性能的影响。结果表明：柔性水囊潜堤能够用作临时防波堤来衰减波浪；与半圆柱刚性潜堤相比，柔性水囊潜堤在降低溃坝波无量纲最大水位、提高消波性能方面更具优势；内部初始水压是影响柔性水囊潜堤消波性能的重要因素，适当降低内部初始水压，有利于增强柔性潜堤的变形程度，进而增加波能耗散，可获得更好的消波效果；而增加浸没深度即潜深，会使得柔性水囊潜堤对溃坝波的影响程度降低，消波效果减弱。 相似文献
2.
基于非静压数值计算模型,本文系统研究了聚焦波作用下透水潜堤的消波特性,通过设置合理的计算工况,详细分析了波高、堤顶水深、谱峰周期、孔隙率以及堤顶宽度5种因素对透水潜堤消波特性的影响。与此同时,本文将透水潜堤的计算结果同不透水潜堤的计算结果进行了对比分析。计算结果表明:透水潜堤对聚焦波的消减作用要强于不透水潜堤,从而说明,透水潜堤能更有效地降低畸形波对海岸基础设施的影响;波高和堤顶水深是影响潜堤消波特性的重要因素,随入射波高增加、堤顶水深减小,透水潜堤对波浪的消减作用逐渐增强。透水潜堤对长周期波浪的消波效果较差。在本文考虑的孔隙率范围内,孔隙率越大,透水潜堤消波效果越好;当孔隙率为0.4,堤顶宽度为0.612 5 m时,透水潜堤可消减54%的入射波能,比不透水潜堤对入射波能的消减增加36.1%。本文研究结果可为进一步认识透水潜堤的消波特性和海岸防护工程设计提供相应的参考。 相似文献
3.
Tai-Wen Hsu Jen-Yi Chang Yuan-Jyh Lan Jian-Wu Lai Shan-Hwei Ou 《Coastal Engineering》2008,55(12):1148-1158
A parabolic wave model was developed to simulate wave transformation over porous structures in the surf zone including wave-breaking and energy dissipation. This model is verified through experimental data for waves passing over a submerged permeable structure with porosities. The numerical results have shown good agreement with the results of laboratory experiments. The model is also applied to the real case of waves propagating over a porous submerged breakwater on a complicated bathymetry. 相似文献
4.
In this study,we investigated wave transformation and wave set-up between a submerged permeable breakwater and a seawall.Modified time-dependent mild-slope equations,which involve parameters of the porous medium,were used to calculate the wave height transformation and the mean water level change around a submerged breakwater.The numerical solution is verified with experimental data.The simulated results show that modulations of the wave profile and wave set-up are clearly observed between the submerged breakwater and the seawall.In contrast to cases without a seawall,the node or pseudo-node of wave height evolution can be found between the submerged breakwater and the seawall.Higher wave set-up occurs if the nodal or pseudo-nodal point appears near the submerged breakwater.We also examined the influence of the porosity and friction factor of the submerged permeable breakwater on wave transformation and set-up. 相似文献
5.
提出了一种将波浪中倾斜板问题等效化简为波浪中水平板单元组的方法,该方法建立在使用分离变量法求解水工结构边值问题的基础上,并使用伽辽金法精确求解连续边界条件,确定考虑衰减波态的速度势函数,从而求解没水倾斜板结构的消波性能。等效化简法计算精度于边界元法相当,且计算单元数量少、开销低。基于二维线性势波理论,对没水倾斜板式防波堤消波性能分析显示,没水板的倾斜角度、没水深度与板长是结构消波性能的控制因素:没水倾斜板防波堤的消波性能优于没水水平板防波堤的消波性能,随着没水板结构的倾斜角度增大,没水倾斜板结构的波浪透射系数显著减小,且长板优于短板,浅板优于深板;与前人的水槽实验对比显示,相对没水深度与波陡影响结构的消波性能,且波陡造成的波浪破碎贡献了显著的波能消耗。该结论对板式防波堤的结构配置、优化设计有重要意义。 相似文献
6.
In this study, we investigated wave transformation and wave set-up between a submerged permeable breakwater and a seawall. Modified time-dependent mild-slope equations, which involve parameters of the porous medium, were used to calculate the wave height transformation and the mean water level change around a submerged breakwater. The numerical solution is verified with experimental data. The simulated results show that modulations of the wave profile and wave set-up are clearly observed between the submerged breakwater and the seawall. In contrast to cases without a seawall, the node or pseudo-node of wave height evolution can be found between the submerged breakwater and the seawall. Higher wave set-up occurs if the nodal or pseudo-nodal point appears near the submerged breakwater. We also examined the influence of the porosity and friction factor of the submerged permeable breakwater on wave transformation and set-up. 相似文献
7.
为使防波堤同时具有良好的掩护效果和水体交换能力,提出了两种带有透浪通道的新型直立式防波堤。基于Fluent求解器建立了三维数值波浪水槽,通过与试验结果对比,验证了该数值水槽求解波浪与透空堤作用具有较高的精度。对两种防波堤在规则波作用下的透浪特性进行了研究,结果表明:透射系数K_t与透空率呈正线性相关,且可通过调整透浪通道间距,使相同透空率下K_t降低20%～30%。对同一结构,K_t随相对波长的增大而显著增大,但受相对波高的影响较小。在透空率大于0.16后,异型沉箱防波堤的消浪性能明显优于错位沉箱。基于数值计算结果,给出了以上两种透空堤波浪透射系数的经验公式。 相似文献
8.
In designing the coastal structures, the accurate estimation of the wave forces on them is of great importance. In this paper, the influences of the phase difference on wave pressure acting on a composite breakwater installed in the three-dimensional (3-D) wave field are studied numerically. We extend the earlier model [Hur, D.S., Mizutani, N., 2003. Coastal Engineering 47, 329–345] to simulate 3-D wave fields by introducing 3-D Navier–Stokes solver with the Smagorinsky's sub-grid scale (SGS) model. For the validation of the model, the wave field around a 3-D asymmetrical structure installed on a submerged breakwater, in which the complex wave deformations generate, is simulated, and the numerical solutions are compared to the experimental data reported by Hur, Mizutani, Kim [2004. Coastal Engineering (51, 407–420)]. The model is then adopted to investigate 3-D characteristics of wave pressure and force on a caisson of composite breakwater, and the numerical solutions were discussed with respect to the phase difference between harbor and seaward sides induced by the transmitted wave through the rubble mound or the diffraction. The numerical results reveal that wave forces acting on the composite breakwater are significantly different at each cross-section under influence of wave diffraction that is important parameter on 3-D wave interaction with coastal structures. 相似文献
9.
Fifteen formulae of wave transmission coefficient for submerged breakwaters obtained during last 3 decades are presented,compared,and analyzed in this paper.The dimensionless parameters mainly involved in this discussion are the relative submerged depth Rc/h,relative wave height Rc/Hi,relative rubble size B/D50,relative breakwater width B/HiL0 and wave breaker index ξ.It indicates that there exist notable differences among the computed results,which mainly originate from the limited experimental conditions and different analytical methods,even though the major tendency keeps similar.It is necessary to conduct more systematic studies to obtain better understanding about the mechanism of wave transmission over submerged breakwaters. 相似文献
10.
基于开源程序REEF3D,通过建立高精度二维数值波浪水槽,系统研究了聚焦波浪在浅堤上传播变形的规律,着重分析了聚焦波浪通过浅堤的水动力过程及能量变化规律,讨论了不同波浪要素对聚焦波浪传播特性的影响。除此之外,还考虑了双浅堤布置对聚焦波浪传播变形的影响。研究结果表明:极端波浪通过浅堤时,堤顶水深越小,波浪主频能量衰减越显著。在给定堤顶水深条件下,聚焦点与浅堤的相对位置对聚焦波浪能量的衰减影响较小。在双浅堤布置条件下,随着浅堤间距的增加,上下游浅堤的相互影响逐渐减弱,高频段的波浪能量也随之减小。 相似文献
11.
Simplified analytical solutions are presented to model the interaction of linear waves with absorbing-type caisson breakwaters, which possess one, or two, perforated or slotted front faces which result in one, or two, interior fluid regions (chambers). The perforated/slotted surfaces are idealized as thin porous plates. Energy dissipation in the interior fluid region(s) inside the breakwater is modelled through a damping function. Under the assumption of potential flow and linear wave theory a boundary-value problem may then be formulated to describe wave interaction with the idealized structure. A solution to this simplified problem may be obtained by an eigenfunction expansion technique and an explicit analytical expression may be obtained for the reflected wave height. Using the experimental work of previous authors, damping coefficients are determined for both single and double chamber absorbing-type caisson breakwaters. Based on the damping for a single perforated-wall breakwater, a methodology is proposed to enable the estimation of the damping coefficients for a breakwater with two chambers. The theoretical predictions of the reflection coefficients for the two-chamber structures using the present model are compared with those obtained from laboratory experiments by other authors. It is found that the inclusion of the damping in the interior fluid region gives rise to improved agreement between theory and experiment. 相似文献
12.
XIE Shileng
Prof. Senior Engineer The First Design Institute of Navigation Engineering Ministry of Communications of China Tianjin P. R. China. 《中国海洋工程》1999,(1)
—The results of design and experiment of a submerged semi-circular breakwater at the Yangtzeestuary show that the submerged structure will be unsafe when the general empirical wave force formulafor semi-circular breakwater is used in design.Therefore,a new calculation method for the wave forces act-ing on a submerged semi-circular structure is given in this paper,in which the wave force acting on the in-side circumference of semi-circular arch is included,and the phase modification coefficient in the generalempirical formula is adjusted as well.The new wave force calculation method has been verified by the re-sults of seven related physical model tests and adopted in the design of the south esturary jetty of the firststage project of Deep Channel Improvement Project of the Yangtze River Estuary,the total jetty length be-ing 17.5km. 相似文献
13.
Numerical study on the characteristics of flow field and wave propagation near submerged breakwater on slope 总被引：2，自引：1，他引：1
In this study,characteristics of flow field and wave propagation near submerged breakwater on a sloping bed are investigated with numerical model. The governing equations of the vertical twodimensional model are Reynolds Averaged Navier Stokes equations. The Reynolds stress terms are closed by a nonlinear k ε turbulence transportation model. The free surface is traced through the PILC-VOF method. The proposed numerical model is verified with experimental results. The numerical result shows that the wave profile may become more asymmetrical when wave propa-gates over breakwater. When wave crest propagates over breakwater,the anticlockwise vortex may generate. On the contrary,when wave hollow propagates over breakwater,the clockwise vortex may generate. Meanwhile,the influenced zone of vortex created by wave crest is larger than that created by wave hollow. All the maximum values of the turbulent kinetic energy,turbulent dissi-pation and eddy viscosity occur on the top of breakwater. Both the turbulent dissipation and eddy viscosity increase as the turbulent kinetic energy increases. Wave energy may rapidly decrease near the breakwater because turbulent dissipation increases and energy in lower harmonics is transferred into higher harmonics. 相似文献
14.
In the present paper, by introducing the effective wave elevation, we transform the extended ellip- tic mild-slope equation with bottom friction, wave breaking and steep or rapidly varying bottom topography to the simplest time-dependent hyperbolic equation. Based on this equation and the empirical nonlinear amplitude dispersion relation proposed by Li et al. (2003), the numerical scheme is established. Error analysis by Taylor expansion method shows that the numerical stability of the present model succeeds the merits in Song et al. (2007)’s model because of the introduced dissipation terms. For the purpose of verifying its performance on wave nonlinearity, rapidly vary- ing topography and wave breaking, the present model is applied to study: (1) wave refraction and diffraction over a submerged elliptic shoal on a slope (Berkhoff et al., 1982); (2) Bragg reflection of monochromatic waves from the sinusoidal ripples (Davies and Heathershaw, 1985); (3) wave transformation near a shore attached breakwater (Watanabe and Maruyama, 1986). Comparisons of the numerical solutions with the experimental or theoretical ones or with those of other models (REF/DIF model and FUNWAVE model) show good results, which indicate that the present model is capable of giving favorably predictions of wave refraction, diffraction, reflection, shoaling, bottom friction, breaking energy dissipation and weak nonlinearity in the near shore zone. 相似文献
15.
16.
The scaled boundary finite element method （SBFEM） is a novel semi-analytical technique combining the advantage of the finite element method （FEM） and the boundary element method （BEM） with its unique properties. In this paper, the SBFEM is used for computing wave passing submerged breakwaters, and the reflection coeffcient and transmission coefficient are given for the case of wave passing by a rectangular submerged breakwater, a rigid submerged barrier breakwater and a trapezium submerged breakwater in a constant water depth. The results are compared with the analytical solution and experimental results. Good agreement is obtained. Through comparison with the results using the dual boundary element method （DBEM）, it is found that the SBFEM can obtain higher accuracy with fewer elements. Many submerged breakwaters with different dimensions are computed by the SBFEM, and the changing character of the reflection coeffcient and the transmission coefficient are given in the current study. 相似文献
17.
This paper presents numerical solutions for the wave reflection from submerged porous structures in front of the impermeable vertical breakwater. A new time-dependent mild-slope equation involves the parameters of the porous medium including the porosity, the friction factor and the inertia coefficient, etc. is derived for solving the boundary value problem. A comprehensive comparison between the present model and the existing analytical solution for the case of simple rectangular geometries of the submerged structure is performed first. Then, more complicated cases such as the inclined and trapezoidal submerged porous structures in front of the vertical breakwater with sloping bottom are considered. This study also examines the effects of the permeable properties and the geometric configurations of the porous structure to the wave reflection. It is found that the submerged porous structure with trapezoidal shape has more efficiency to reduce the wave reflection than that of triangular shape. The numerical results show that the minimum wave reflection is occurred when the breakwater is located at the intermediate water depth. 相似文献
18.
Experimental researches on reflective and transmitting performances of quarter circular breakwater under regular and irregular waves 总被引：1，自引：1，他引：0
A series of regular and irregular wave experiments are conducted to study the reflective and transmitting performances of quarter circular breakwater (QCB) in comparison with those of semi-circular breakwater (SCB). Based on regular wave tests, the reflection and transmission characteristics of QCB are analyzed and a few influencing factors are investigated. Then, the wave energy dissipation as wave passing over the breakwater is discussed based on the hydraulic coefficients of QCB and SCB. In irregular wave experiments, the reflection coefficients of QCB and their spectrums are studied. Finally, the comparisons between the experimental results and numerical simulations for QCB under regular and irregular wave conditions are presented. 相似文献
19.
20.
基于废旧轮胎再利用及研发简易且低廉的施工方法与维护成本,本研究以规则波水工模型试验研究提出应用于港口码头的多孔隙弹性帷幕的初步理念。利用模型车轮胎以模块化方式组装成弹性帷幕后安装于码头前壁,研究多种周期波浪作用及不同消波室纵深对波浪反射率的影响。实验结果表明,简单的单一消波室多孔隙弹性帷幕对短周期波浪的消波效果较显著,消波室纵深较大者反射率较低,但可能引致水体振荡,后续可再强化消波室的消能效果。未来如能妥善研究废旧轮胎应用于多孔隙弹性帷幕消波结构物的施工与维修方法,除可缓解废旧轮胎处理给环境带来的压力外,也提供一种可用于简易渔港的施工简单、维修容易且资源再利用的消能结构物,该工程技术亦可输出至发展中国家,符合可持续发展观。 相似文献