共查询到20条相似文献，搜索用时 875 毫秒
1.
利用迎风加权格式对二维Burgers方程的对流项进行处理,构造求解二维Burgers方程的一类交替分块显隐的有限差分格式,该方法具有并行本性,且绝对稳定.数值实验表明方法还具有较好的精度. 相似文献
2.
为了研究污染物对流扩散方程中不同时空格式的适用性,针对对流扩散方程的一维﹑二维和三维3种情况,分别建立了预报-校正的有限差分数值模型。在时间步进格式上分别采用了Crank-Nicolson格式或混合4阶Adams-Bashforth-Moulton格式,对对流项分别采用2阶精度或4阶精度,对扩散项采用了2阶精度。利用建立的数值模型求解了经典的污染物浓度场对流扩散,通过数值解与解析解的比较讨论了不同时空格式对数值模型计算结果的影响。结果表明:对空间一次导数采用4阶精度可以避免采用2阶精度带来的误差。采用混合4阶Adams-Bashforth-Moulton格式或Crank-Nicolson格式数值计算结果均与解析解吻合程度较好,但对于数组为[40,40,40]的三维对流扩散问题,前者比后者省时20.7%。 相似文献
3.
在三维海洋模式POM基础上建立水质模型,采用中心差分格式、迎风格式以及Smolarkiewicz迎风格式离散物质输运方程.以三维理想水槽中连续源排放的浓度场预测为例,分析3种离散格式求解所得的浓度场.结果表明,3种格式的数值解与解析解的偏差均小于20%.中心差分格式会引起解的震荡,导致物质的反向输移,出现浓度负值.迎风格式能够保证浓度的正值,但该格式带来的数值耗散导致数值解与解析解偏离较大.Smolarkiewicz迎风格式在普通迎风格式基础上引入抗扩散流速,经多次叠代,能有效降低计算中的数值耗散,提高了计算精度. 相似文献
4.
建立了求解一维全非线性Green-Naghdi水波方程的中心有限体积/有限差分混合数值格式。采用结构化网格对守恒形式的控制方程进行离散和积分,界面数值通量采用有限体积法计算,剩余项则采用中心有限差分格式求解。其中,采用中心迎风有限体积格式计算控制体界面数值通量,并结合界面变量的线性重构方法,使其在空间上具有四阶精度,通过引入静压重构技术和波浪破碎指标使模型具备处理海岸水-陆动边界及波浪破碎的能力。时间积分则采用具有总时间变差减小(Total Variation Diminishing,TVD)性质的三阶龙格-库塔法进行。应用该模型对孤立波在常水深和斜坡海岸上的传播过程及规则波跨越潜堤传播的实验进行了数值模型研究,数值计算同解析解及实验数据吻合良好。 相似文献
5.
此文应用Fourier方法和能量不等式研究了常系数和变系数的对流扩散方程在迎风差分格式的情形下数值解的稳定性,所得结果对实际计算有着重要的意义。 相似文献
6.
为建立高效的Boussinesq类水波数值模型,提出了一种新型的、基于有限差分和有限体积方法的混合数值格式。针对守恒形式的一维控制方程,在等间距矩形控制体内对其进行积分并离散,采用有限体积方法计算界面数值通量,剩余源项采用有限差分方法计算。其中,采用MUSTA格式并结合高精度状态插值方法计算控制体界面数值通量。时间积分则采用具有TVD性质的三阶龙格-库塔多步积分法进行。除验证模型外,重点对MUSTA格式和广泛使用的HLL格式进行了比较。结果表明,MUSTA格式可用于Boussinesq类水波方程数值求解,综合考虑数值精度、计算效率、程序编制和实际应用这几个方面,其较HLL格式更具有优势。 相似文献
7.
提出解非线性耦合Schrodinger方程的1种差分格式.理论证明此格式关于时间和空间具有二阶精度,保持了连续方程的2个守恒量,并且是收敛、无条件稳定的.大量的数值试验证明了差分格式的精度以及守恒性. 相似文献
8.
建立光纤布拉格光栅耦合模方程的一个高精度紧差分格式,并分析了差分格式的稳定性。Fourier分析表明线性格式是无条件稳定的。数值实验结果说明此格式保持守恒律且达到了预期收敛阶。 相似文献
9.
应用内外解匹配的方法和驻相法推导了柱坐标系下地震引起的水面波动方程的解,即推导了地震海啸波生成与传播的理论方程,并对越洋地震海啸理论方程进行了求解。基于Boussinesq方程出发,建立了二维越洋海啸波传播数学模型,并对越洋海啸进行了数值计算,计算方法采用有限差分方法,差分格式采用交替方向隐格式(Alternating Direction Implicit即ADI方法)。利用越洋海啸计算模式对发生在大洋中的地震海啸进行了模拟,将数值模拟结果与地震海啸波理论方程的计算结果进行了比较,两种计算结果吻合较好。 相似文献
10.
11.
A numerical model for coastal water wave motion that includes an effective method for treatment of non-reflecting boundaries is presented. The second-order one-way wave equation to approximate the non-reflecting boundary condition is found to be excellent and it ensures a very low level of reflection for waves approaching the boundary at a fairly wide range of the incidence angle. If the Newman approximation is adopted, the resulting boundary condition has a unique property to allow the free propagation of wave components along the boundary. The study is also based on a newly derived mild-slope wave equation system that can be easily made compatible to the one-way wave equation. The equation system is theoretically more accurate than the previous equations in terms of the mild-slope assumption. The finite difference method defined on a staggered grid is employed to solve the basic equations and to implement the non-reflecting boundary condition. For verification, the numerical model is then applied to three coastal water wave problems including the classical problem of plane wave diffraction by a vertical circular cylinder, the problem of combined wave diffraction and refraction over a submerged hump in the open sea, and the wave deformation around a detached breakwater. In all cases, the numerical results are demonstrated to agree very well with the relevant analytical solutions or with experimental data. It is thus concluded that the numerical model proposed in this study is effective and advantageous. 相似文献
12.
特征线计算格式下共轭方程两种导出途径的比较 总被引：1，自引：0，他引：1
共轭方程的导出是建立资料同化模型的关键，其导出方式有两种途径：AFD形式与FDA形式。在特征线计算格式基础上针对一类较广泛海洋动力控制方程分析了其两种共轭方程（AFD形式与FDA形式）之间的关系，并将理论结果应用于波谱共轭方程的讨论。 相似文献
13.
数值波浪水槽是研究波浪及波浪与结构相互作用的常用工具，可在真实尺度下产生波浪，并提供流场的详细数据。然而，大部分数值波浪水槽都存在数值耗散和数值色散问题，数值耗散使波能缓慢消散，数值弥散在波传播过程中使波频移。本文在有限差分法（FDM）求解欧拉方程的基础上，提出了一种抑制数值耗散效应的简单方法，考虑阻尼项的影响，对波的传播解进行了解析求解。该方法的主要思想是在动量方程中附加一个源项，其强度由数值阻尼效应的强度决定。本文通过对规则线性波、Stokes波和不规则波的数值模拟，验证了该方法的有效性。结果表明，本文方法可有效减小数值波浪水槽中存在的数值耗散现象。 相似文献
14.
Hydrodynamic characters on a horizontal, thin, rigid plate located beneath the free surface are numerically investigated. Assuming a linear, time-harmonic potential flow and utilizing Green identity, the governing Laplace equation can be simplified into Fredholm integral equation ofthe second kind. Supposing linear-order discontinuous elements along intersecting vertical boundaries, and by use of the boundary element method, numerical solution about source strength distribution on the plate can be changed into a series of algebraic equations. The 3D Green function is introduced to set up the integral equations, and the GMRES solver is performed for solving the large dense linear system of equations. The added-mass, damping force and exciting force are evaluated directly from the equations. It is found that the added-mass coefficient becomes negative for a range of frequencies when the plate is sufficiently close to the free surface. 相似文献
15.
This paper presents the numerical solution of a new nonlinear mild-slope equation governing waves with different frequency components propagating in a region of varying water depth. There are two new nonlinear equations. The linear part of the equations is the mild-slope equation, and one of the models has the same non-linearity as the Boussinesq equations. The new equations are directly applicable to the problems of nonlinear wave-wave interactions over variable depth. The equations are first simplified with the parabolic approximation, and then solved numerically with a finite difference method. The Crank-Nicolson method is used to discretize the models. The numerical models are applied to a set of published experimental cases, which are nonlinear combined refraction-diffraction with generation of higher harmonic waves. Comparison of the results shows that the present models generally predict the measurements better than other nonlinear numerical models which have been applied to the data set. 相似文献
16.
17.
A Unified Variational Principle of Fluid Mechanics and Application on Solitary Subdomain or Point 总被引：1，自引：0，他引：1
-According to basic equations of fluid mechanics, this paper presents a unified variational principle of fluid mechanics (UVPFM) by using the optimization method of weighted residuals (OMWR). The advantages are as follows, the establishment of the functional and the variational principle is easy, it can change various problems of fluid mechanics derived by basic equations into a unified optimization problem, and the solution is the optimum one in some sense. According to the OMWR for the solitary subdomain, this paper uses UVPFM onto any solitary subdomain and gives the solution of the hydrodynamics equation which is suitable only for that solitary subdomain. According to the OMWR for solitary point, this paper uses UVPFM to any solitary point and gives the solution of the hydrodynamics equation (point solution) which is suitable only for that solitary point. As the solution for the solitary subdomain or solitary point is developed independently, the compatibility with other subdomain or other points, do 相似文献
18.
In order to solve unsteady incompressible Navier–Stokes(N–S) equations, a new stabilized finite element method,called the viscous-splitting least square FEM, is proposed. In the model, the N–S equations are split into diffusive and convective parts in each time step. The diffusive part is discretized by the backward difference method in time and discretized by the standard Galerkin method in space. The convective part is a first-order nonlinear equation.After the linearization of the nonlinear part by Newton's method, the convective part is also discretized by the backward difference method in time and discretized by least square scheme in space. C~0-type element can be used for interpolation of the velocity and pressure in the present model. Driven cavity flow and flow past a circular cylinder are conducted to validate the present model. Numerical results agree with previous numerical results, and the model has high accuracy and can be used to simulate problems with complex geometry. 相似文献
19.
Based on Green–Naghdi equation this work studies unsteady ship waves in shallow water of varying depth. A moving ship is regarded as a moving pressure disturbance on free surface. The moving pressure is incorporated into the Green–Naghdi equation to formulate forcing of ship waves in shallow water. The frequency dispersion term of the Green–Naghdi equation accounts for the effects of finite water depth on ship waves. A wave equation model and the finite element method (WE/FEM) are adopted to solve the Green–Naghdi equation. The numerical examples of a Series 60 (CB=0.6) ship moving in shallow water are presented. Three-dimensional ship wave profiles and wave resistance are given when the ship moves in shallow water with a bed bump (or a trench). The numerical results indicate that the wave resistance increases first, then decreases, and finally returns to normal value as the ship passes a bed bump. A comparison between the numerical results predicted by the Green–Naghdi equation and the shallow water equations is made. It is found that the wave resistance predicted by the Green–Naghdi equation is larger than that predicted by the shallow water equations in subcritical flow
, and the Green–Naghdi equation and the shallow water equations predict almost the same wave resistance when
, the frequency dispersion can be neglected in supercritical flows. 相似文献
20.
The VOF method and the k–ε model, combined with the equation of state of air at constant temperature, have been used to calculate the total horizontal wave force caused by monochromatic waves acting on a perforated caisson with a top cover. From comparison of various parameters, such as the total horizontal force, the pressure difference on the front wall, the pressure on the back wall and the pressure on the top cover, between the numerical results and test data, it can be seen that the numerical results agree well with the test data. It is concluded that the method described in this paper can be utilized to calculate wave forces acting on perforated caissons with a top cover in the case of nonovertopping, nonbreaking waves. A simplified method to calculate the total horizontal force has been developed, based on test data, using a least-squares method. A comparison between the numerical results and the values calculated from the simplified equations shows good agreement. Therefore the simplified equations can be used in engineering applications to evaluate the total horizontal force on a perforated caisson with a top cover. 相似文献