共查询到20条相似文献，搜索用时 62 毫秒
1.
渤海油田浅水软刚臂系泊FPSO触底分析 总被引：6，自引：3，他引：6
在线性三维势流理论的基础上,采用时域计算方法对BZ25—1油田16万吨级FPSO不同吃水条件下的碰底情况作了分析研究。数值计算结果与模型试验进行了比较,两者吻合较好,说明应用时域计算方法可以从理论上预报FPSO在浅水中的触底情况。这对我国渤海等浅水海域油田应用FPSO系统进行开发具有一定的意义。 相似文献
2.
Much attention should be paid to a large FPSO moored permanently in an oil field with water depth of only about 20 m, since shallow water effects on the hydrodynamics may bring about collision and damage. A 160kDWT FPSO with a permanent soft yoke mooring system is investigated with various shallow water depths and focuses are the low frequency surge motion and mooring load. Computation for the FPSO system is made based on linear 3-D potential fluid theory and time-domain numerical simulation method. Corresponding model test is carried out in the ocean engineering basin of Shanghai Jiao Tong University. It is shown that, in the surge natural period, low frequency surge motion and mooring force increase remarkably with the decrease of water depth. Especially, the smaller the ratio of water depth and draught is, the quicker the increase is. The shallow water effects should be taken into account carefully for determining the design load of a single point mooring system. 相似文献
3.
The real-time estimation of second-order difference-frequency wave forces using real-time random-wave measurement is developed for the FF (feed-forward) control based dynamic positioning of floating offshore vessels and platforms. The efficacy of the developed FF control scheme is validated by using the in-house hull-mooring-riser-thruster fully coupled time-domain computer simulation program through comparisons with the results by the conventional feedback-control-only case. The feedback (FB) control intends to reduce the accumulated position-excursion error, meanwhile the proposed feed-forward control compensates the controllable slowly-varying wave loads by activating thrusters in advance based on the real-time estimation of the second-order difference-frequency wave loadings using the real-time signal of random incident wave. The real-time estimation of the second-order difference-frequency wave loads is done by using the double-convolution integral with pre-calculated QIF (quadratic impulse function). The numerical DP system is successfully implemented with the FF control algorithm in the vessel-thruster fully coupled time-domain simulation program. The developed schemes are applied to a turret-moored FPSO (floating production storage offloading) with six dynamic-positioning (DP) azimuth thrusters in two non-collinear storm conditions. It is clearly demonstrated that the developed FF control scheme performs much better than the conventional feedback-control-only case. The corresponding reductions in horizontal offsets, motions, mooring tensions, and fuel consumptions by using the developed FF control scheme are underscored. 相似文献
4.
针对传统圆筒型FPSO垂荡运动剧烈的特点,提出一种带有垂荡抑制结构的圆筒型FPSO。采用1∶77.8的缩尺比制作模型,进行垂荡纵摇衰减试验,得到带有不同垂荡抑制结构模型的固有周期和无因次阻尼系数,进而选取最优的垂荡抑制结构型式。之后计算并对比传统圆筒型FPSO和新型圆筒型FPSO垂荡纵摇运动的固有周期和幅频响应函数。在此基础上,结合我国南海海洋环境条件,设计新型圆筒型FPSO的系泊系统,计算分析自存工况下的耦合动力响应,并与传统圆筒型FPSO进行对比。结果表明,文中提出的垂荡抑制结构可以有效增大系统垂荡纵摇运动的固有周期,改善运动性能,提高系泊的安全性。 相似文献
5.
It is ideal to design the best hull shape for a floating production storage and offloading unit (FPSO) that meets all performance criteria from an engineering point of view. However, in reality, it is difficult to satisfy all the criteria at the same time. If one of the performances cannot meet the criteria, then additional equipment or systems are installed to improve that performance. In this paper, when an FPSO cannot meet the towing stability inherently, we attempt to establish a procedure for determining an auxiliary towing system. Firstly, various systems that can be applied to the FPSO are compared and reviewed to improve the towing stability of the FPSO. Among them, using three active thrusters was chosen as the auxiliary towing system. Improvement of towing stability was verified from a towing model test conducted at the Maritime Research Institute Netherlands (MARIN). However, thruster cavitation was raised as a key problem when using thrusters for a purpose for which they were not intended. A thruster cavitation model test was additionally performed to check the safety of the thrusters. Based on these results, a safe operating range under extreme condition was confirmed by observing the occurrence of thruster cavitation. The predicted maximum unit total thrust of each thruster was compared with the observed safe operating range. Finally, the effectiveness and safety of the auxiliary towing system was verified. 相似文献
6.
针对圆筒型海上储油装置FPSO垂荡运动性能较差、无法安装干式井口的问题,设计了带延伸筒体与矩形阻尼结构的圆筒型FPSO,根据延伸筒体与矩形阻尼结构是否通海分为两种型式。建立水动力计算模型,比较分析不同延伸筒体和阻尼结构型式对FPSO水动力性能的影响。针对南海作业海域,设计了悬链式系泊系统,基于JONSWAP波浪谱对FPSO的运动进行时域预报,并对系泊系统进行校核。分析结果表明:通海型FPSO垂荡固有周期显著提升,可以错开南海百年一遇谱峰周期,通海型FPSO满足钻井、安装干式井口的运动响应要求,系泊系统系缆张力满足规范要求。 相似文献
7.
针对1 000 m水深作业的新型圆筒型浮式生产储卸油系统（FPSO）,选择多点系泊FPSO和穿梭油轮串靠外输方案,分析串靠方案在中国南海的可行性。FPSO和穿梭油轮作业时两者之间相互影响的研究较为重要,通过ANSYS-AQWA建立水动力耦合分析模型,基于多浮体水动力学方法进行时域耦合仿真模拟。在FPSO作业海况下,分析了串靠外输时系泊锚链及系泊大缆的张力特性和两浮体的运动响应,对大缆的长度和刚度参数变化进行了分析。结果表明：串靠外输方案满足新型圆筒型FPSO的作业环境。随着系泊大缆长度增加,其张力最值逐渐减小,FPSO和穿梭油轮的最小间距逐渐增大。两浮体最小距离稳定在83 m左右。随着系泊大缆刚度增加,其张力最值增大,相比于大缆长度,大缆刚度对耦合系统的影响较弱。 相似文献
8.
9.
As a popular solution for mooring an FPSO （Floating Production, Storage and Offloading） permanently in shallow water, the soft yoke mooring system has been widely used in ocean oil production activities in the Bohai Bay of China. In order to simulate the interaction mechanism and conduct dynamic analysis of the soft yoke mooring system, a theoretical model with basic dynamic equations is established. A numerical iteration algorithm based on error estimation is developed to solve the equations and calculate the dynanfic response of the mooring system due to FPSO motions. Validation is conducted by wave basin experimentation. It is shown that the numerical simulation takes only a few iteration times and the final errors are small. Furthermore, the calculated results of both the static and dynamic responses agree well with those ones obtained by the model test. It indicates that the efficiency, the precision, the reliability and the validity of the developed numerical algorithm and program are rather good. It is proposed to develop a real-time monitoring system to further monitor the dynamic performance of the FPSO with a soft yoke mooring system under various real sea environments. 相似文献
10.
当FPSO服役于目标油田时,将受到风浪流的作用力。其中,风力给FPSO一个恒定的静力,使其偏离原来的位置。风力计算在FPSO系泊系统的分析过程中是非常重要的。设计人员常常参考OCIMF进行风力计算,或者参考API规范得出。OCIMF为针对油轮的计算规范,但使用OCIMF计算FPSO风力及流力的方法,与FPSO的适应性仍需要进一步论证。API规范针对海上浮式系统,其计算风流力的方法使用也非常广泛,其原理为将FPSO上部各个模块风力叠加得出。以FPSO风载荷为研究对象,开展了风洞模型试验,获得了典型FPSO风载荷特性曲线,并将试验结果分别与OCIMF结果和API规范计算结果进行对比分析,最终给出FPSO风力计算方法的建议。本数据可用于FPSO的风力计算,也可为FPSO运动、系泊的设计研究提供参考。 相似文献
11.
Increasing the number of hydrophones in an array should increase beamformer performance. However, when the number of hydrophones is large, integration times must be long enough to give accurate cross-spectral matrix (CSM) estimates, but short enough so that the dynamic behavior of the noise described by the CSM is captured. The dominant mode rejection (DMR) beamformer calculates adaptive weights based on a reduced rank CSM estimate, where the CSM estimate is formed with a subset of the largest eigenvalues and their eigenvectors. Since the largest eigenvalue/eigenvector pairs are estimated rapidly, the integration time required is reduced. The purpose of this study was to examine the DMR beamformer performance using a bottom-mounted horizontal line array in a shallow-water environment. The data were processed with a fully adaptive beamformer and the DMR beamformer. The DMR beamformer showed better performance than the fully adaptive beamformer when using arrays with larger numbers of hydrophones. Thus, in highly dynamic noise environments, the DMR beamformer may be a more appropriate implementation to use for passive sonar detection systems 相似文献
12.
In this paper, we define a time-domain pressure transfer function calculated from SIWEH (smoothed instantaneous wave energy history) transforms, and a time-frequency domain pressure transfer function calculated from wavelet transforms, of synchronized wave and pressure data. It is our objective to study whether the time-domain pressure transfer function and the time-frequency domain pressure transfer function can provide new interpretation of wind wave behaviors. The detail structure of local time-frequency pressure transfer function in three-dimensional plot from wavelet transform is not employed due to its large variations, instead the time-integral wavelet spectral pressure transfer function and frequency-integral wavelet SIWEH pressure transfer function are used. These two averaged pressure transfer functions are smooth approximations of frequency-domain Fourier and time-domain SIWEH pressure transfer functions, respectively.Application to real ocean waves reveals that in frequency-domain the measured Fourier and wavelet spectral pressure transfer functions can be approximated by the linear pressure transfer function in the dominant wave range. In time-domain, the wavelet SIWEH pressure transfer function is a better indicator of wind wave behaviors than the SIWEH pressure transfer function. A value higher than 0.5 for the wavelet SIWEH pressure transfer function is a good discriminator of relative shallow-water long waves and wave groups are mostly composed of relative low frequency long waves. 相似文献
13.
The coupling and interactions between ship motion and inner-tank sloshing are investigated by a time-domain simulation scheme. For the time-domain simulation, the hydrodynamic coefficients and wave forces are obtained by a potential-thoery-based three-dimensional (3D) diffraction/radiation panel program in frequency domain. Then, the corresponding simulations of motions in time domain are carried out using convolution integral. The liquid sloshing in a tank is simulated in time domain by a Navier–Stokes solver. A finite difference method with SURF scheme is applied for the direct simulation of liquid sloshing. The computed sloshing force and moment are then applied as external excitations to the ship motion. The calculated ship motion is in turn inputted as the excitation for liquid sloshing, which is repeated for the ensuing time steps. For comparison, we independently developed a coupling scheme in the frequency domain using a sloshing code based on the linear potential theory. The hydrodynamic coefficients of the inner tanks are also obtained by a 3D panel program. The developed schemes are applied to a barge-type FPSO hull equipped with two partially filled tanks. The time-domain simulation results show similar trend when compared with MARIN's experimental results. The most pronounced coupling effects are the shift or split of peak-motion frequencies. It is also found that the pattern of coupling effects between vessel motion and liquid sloshing appreciably changes with filling level. The independent frequency-domain coupled analysis also shows the observed phenomena. 相似文献
14.
《Oceanic Engineering, IEEE Journal of》2006,31(2):413-420
The robustness of the coherence of waveguide propagation to environmental uncertainty becomes an important consideration for systems that seek to exploit coherence for gain. Examples include matched field processing for passive localization and time reversal mirrors (TRMs) for active systems. Here, efficient normal mode representations of midfrequency time-domain propagation using the narrowband and adiabatic approximations are used to explore the deterioration of coherent active system predictability and performance in the presence sound-speed perturbations in the water column. Results show that for TRMs the reverberation level at the focal range is increased, and the scattering from an illuminated object is reduced for ensembles over oceanographic uncertainty. Results are obtained analytically as formal averages and are believed to represent a lower limit on the deterioration of TRM performance in the presence of environmental uncertainty for shallow-water waveguides. 相似文献
15.
16.
B.J. Kim 《Ocean Engineering》2011,38(10):1130-1140
The aim of this paper is to study the feasibility of a computational fluid dynamics (CFD) method to examine the effect of wind on the thermal-diffusion characteristics of floating production storage and offloading (FSPO) topside models subject to fire. It is motivated by the need to identify the fire loads on FPSO topsides, taking into account the effects of wind speed and direction as well as the effects of geometry of the FPSO topsides. The results of a wind-tunnel test and CFD simulation undertaken for these purposes on a 1/14-scale FPSO topside model of a VLCC class FPSO unit are reported here. In the wind-tunnel test, the locations of the heat source of the fire are varied, as are the speed and direction of the wind, and the temperature distribution is measured. CFD simulations, using the ANSYS CFX (2009) program, were performed on the test model, with the results compared with the experimental results. It is concluded that wind has a significant effect on the thermal-diffusion characteristics of the test model and that the CFD simulations are in good agreement with the experimental results. The insights developed in this study will be very useful for the fire engineering of FPSO topsides. 相似文献
17.
Utilizing High-Frequency Acoustic Backscatter to Estimate Bottom Sand Ripple Parameters 总被引：1，自引：0，他引：1
《Oceanic Engineering, IEEE Journal of》2009,34(4):431-443
18.
浮式生产储油船振动噪声混合数值预报 总被引：4，自引：0，他引：4
建立了可覆盖全频域的浮式生产储油船(FPSO,floating production storage and offloading)工作环境下振动噪声混合数值预报技术流程。将声学计算基本理论方法(有限元/边界元方法与统计能量法)应用于宽频带多噪声源的海洋工程船舶设计中,为设计能保证人员正常进行生产、生活噪声环境下的FPSO提供指导,满足国内船舶设计部门对该技术的迫切需要。文中采用声学边界元求解了FPSO上层建筑低中频域振动噪声,采用统计能量分析方法求解了高频域振动噪声,通过两种方法接力运用和不同模型间的顺利转换,实现了FPSO声学问题全频域分析。并讨论了各类方法的适用范围。 相似文献
19.
Time-Variant Reliability Analysis of FPSO Hull Girder Considering Corrosion Based on Statistics 总被引：1，自引：0，他引：1
FPSO is a kind of important exploitation platform used in ocean oil and gas industry, which has the unique character of mooring at outsea for a long time. Since it can not be inspected and maintained thoroughly at dock like other kinds of ships, the reliability of FPSO hull girder during the whole service should be focused. Based on latest corrosion database and rational corrosion model, the ultimate strength of one FPSO is calculated under the conditions of slight, moderate and severe corrosion. The results not only provide the reliability under different corrosion conditions, but also do well for further inspection and maintenance research. The results provide necessary foundation for deciding inspection intervals and maintenance measures, which has practical sense to improve the general safety level of ocean engineering. 相似文献
20.
FPSO系统在深海海洋油气资源开发中扮演着重要的角色,而深水FPSO系统水下立管管路较长,立管整体重量较大,立管在水流作用下产生的涡激振动也较强,这些将给FPSO主船体带来严重的稳性、强度及疲劳问题。鉴于此,深海FPSO系统在油气资源开发过程中,须在水下一定深度设置若干水下软管支撑浮体,用以支撑来自深海海底的管线,减轻深水立管对FPSO的负载作用。随着深海资源开发的深入发展,传统水下软管支撑浮体作为FPSO系统的关键装备已经无法满足深海开采的需求,寻求大型化、深海化、生命周期长久化的新型水下立管支撑平台迫在眉睫,设计简便快捷、低风险的安装方法成为其开发过程中的重点和难点。详细描述了水下软管支撑浮体的产生及其发展历程,针对深海开发的需求提出了新型立管支撑平台的新概念,着重对新概念下下水安装更便捷的耐压立管支撑平台设计原理及其下水安装方式展开了分析,最后对水下软管支撑浮体和新型立管支撑平台的关键技术进行了总结,并提出了需进一步解决的问题。 相似文献