共查询到20条相似文献，搜索用时 15 毫秒
1.
The substructures of offshore wind turbines are subjected to extreme breaking irregular wave forces. The present study is focused on investigating breaking irregular wave forces on a monopile using a computational fluid dynamics (CFD) based numerical model. The breaking irregular wave forces on a monopile mounted on a slope are investigated with a numerical wave tank. The experimental and numerical irregular free surface elevations are compared in the frequency-domain for the different locations in the vicinity of the cylinder. A numerical analysis is performed for different wave steepness cases to understand the influence of wave steepness on the breaking irregular wave loads. The wave height transformation and energy level evolution during the wave shoaling and wave breaking processes is investigated. The higher-frequency components generated during the wave breaking process are observed to play a significant role in initiating the secondary force peaks. The free surface elevation skewness and spectral bandwidth during the wave transformation process are analysed and an investigation is performed to establish a correlation of these parameters with the breaking irregular wave forces. The role of the horizontal wave-induced water particle velocity at the free surface and free surface pressure in determining the breaking wave loads is highlighted. The higher-frequency components in the velocity and pressure spectrum are observed to be significant in influencing the secondary peaks in the breaking wave force spectrum. 相似文献
2.
Convergence criteria are provided for truncating the evanescent eigenmode series in the Green's function for vertical, axisymmetric bodies of revolution. To numerically compute the strength of the source distribution for both the exciting and restoring forces, separate criteria are required for the off-diagonal and for the diagonal elements in the matrix of coefficients for the source strengths. The Black-Fenton algorithms for wave-induced exciting forces on vertical axisymmetric bodies of revolution are extended to include the wave-induced restoring forces. The Gauss-Seidel matrix version method recommended by Fenton is compared with the Gauss elimination method and is found to be non-converging for near deep water wave conditions. Comparison between theory and measured data for the dynamic response of a discus buoy demonstrates the convergence criteria over a range of dimensionless frequencies in relatively deep water wave conditions. 相似文献
3.
Models based on the theoretical framework of soil mechanics are presented to evaluate storm wave-induced silty seabed instability and geo-hazards through a case study in the Yellow River delta. First, the transient and residual mechanisms of wave-induced pore pressure are analyzed. Three typical models (i.e., elastic model, pore pressure development mode and elasto-plastic model) are proposed to calculate wave-induced stresses in the seabed. Next, mechanisms and calculation methods of wave-induced seabed instability modes such as scour, liquefaction, seepage instability and shear slide are proposed. Typical results of storm wave-induced excess pore pressure and seabed instability are given and relevant discussions are made. At last, the formation mechanism of geo-hazards in the Yellow River delta is analyzed based on the proposed mechanism and calculated results. Results and analysis indicate that both transient and residual mechanisms are important to storm wave-induced response of silty seabed and hence the elasto-plastic model is more appropriate. Complete liquefaction does not happen, while other types of instability occur mostly within 2–6 m under the seabed surface. Wave-induced scour, seepage instability and shear slide are all possible instability modes under the 1-year storm waves, and scour is predominant for the 50-year storm waves. The formation mechanism of geo-hazards such as shallow slide and storm wave reactivation, pockmarks, silt flow and gully, disturbed stratum and hard crust in the Yellow River are well explained based on the proposed mechanisms and calculated results of storm wave-induced silty seabed instability. 相似文献
4.
Experimental and Theoretical Investigation of Wave Forces on A Partially-Perforated Caisson Breakwater with A Rock-Filled Core 总被引：2，自引：0，他引：2
1.IntroductionVertical breakwaters are widely used for harbor and coastline protection in coastal engineering.Recently,perforated breakwaters have been often used in practice as they can effectively reduce thewaveforces actingon,the wave reflectionfromand… 相似文献
5.
海-气界面动量通量的估计方法分析与应用 总被引：3，自引：1，他引：2
首次将经验模态分解方法引入湍流稳定性分析,与传统的线性和滑动平均去势方法进行了比较,发现经验模态分解方法的去势效果最好。基于"南海平台通量观测计划"(FOPSCS)近两年的连续通量观测数据,得到了22 476个摩擦速度的估算值,结果表明,当风速小于5m/s时,拖曳系数随风速增大而减小,而风速大于5m/s时,拖曳系数随风速增大而增大,两种情形分别反映了黏性表皮摩擦和波浪引起的形状阻力对海面风应力的贡献。同时发现短风区情形的拖曳系数大于长风区情形,说明波浪成长状态会对海-气界面动量交换产生影响。 相似文献
6.
Researches on breaking-induced currents by waves are summarized firstly in this paper. Then, a combined numerical model in orthogonal curvilinear coordinates is presented to simulate wave-induced current in areas with curved boundary or irregular coastline. The proposed wave-induced current model includes a nearshore current module established through orthogonal curvilinear transformation form of shallow water equations and a wave module based on the curvilinear parabolic approximation wave equation. The wave module actually serves as the driving force to provide the current module with required radiation stresses. The Crank-Nicolson finite difference scheme and the alternating directions implicit method are used to solve the wave and current module, respectively. The established surf zone currents model is validated by two numerical experiments about longshore currents and rip currents in basins with rip channel and breakwater. The numerical results are compared with the measured data and published numerical results. 相似文献
7.
The total inline wave forces, the irregular wave forces in particular, on an isolated pile are investigated by experiment. The relationships between force coefficients Cd and CM including in Morison's Eq. . and KC number or Reynolds number Re, and the variation of Cd and Cm in frequency domain are analysed with the method of least-squares in time domain and that of cross-spectral analysis. The plots of C4and Cmversus KCare given for both regular and irregular waves and those for irregular waves are used for numerical simulation of the irregular wave forces on the vertical pile and the results are in fairly good agreement with the test data. Based on the experimental results , the applicability of the spectral analysis method for calculating irregular wave forces on an isolated pile is investigated with the coherency γ between wave and wave forces and with KC number. 相似文献
8.
Structural Types of Sea Embankment and Their Stability Analysis 总被引：1，自引：0，他引：1
MAO Changxi DUAN Xiangbao MAO Peiyu Prof. Senior Engineer Hydraulic Engineering Department Nanjing Hydraulic Research Institute 《中国海洋工程》1998,(3)
In this paper based on investigation on the structural types of sea embankments in thesoutheast coastal area of China,as well as the related tidal stages,waves and strength of marine soils,thefinite element method(FEM)calculations for seepage flow stability,including the overall stability againstsliding and local stability of sloping surface under the action of tidal stage and waves are carried out.Acomparison of the computational results of FEM for single circular slip,composite circular slip andgeogrid reinforcement against sliding shows that for calculation of stability against sliding of marine softsoil foundation it is even more reasonable to use the composite circular slip.The stability of sloping typesea embankment against sliding is slightly better than that of the vertical face type;for the combination ofthree defences(wave,scour and seepage defences)the sea embankment structural type of a compositecross section with a platform should be a good one,but it still should be suitable to local condit 相似文献
9.
Fabrice Ardhuin 《Journal of Oceanography》2006,62(6):917-922
In a recent paper, Kenyon (2004) proposed that the wave-induced energy flux is generally not conserved, and that shoaling
waves cause a mean force and torque on the bottom. That force was equated to the divergence of the wave momentum flux estimated
from the assumption that the wave-induced mass flux is conserved. This assumption and conclusions are contrary to a wide body
of observations and theory. Most importantly, waves propagate in water, so that the momentum balance generally involves the
mean water flow. Although the expression for the non-hydrostatic bottom force given by Kenyon is not supported by observations,
a consistent review of existing theory shows that a smaller mean wave-induced force must be present in cases with bottom friction
or wave reflection. That force exactly balances the change in wave momentum flux due to bottom friction and the exchange of
wave momentum between incident and reflected wave components. The remainder of the wave momentum flux divergence, due to shoaling
or wave breaking, is compensated by the mean flow, with a balance involving hydrostatic pressure forces that arise from a
change in mean surface elevation that is very well verified by observations. 相似文献
10.
In this paper, a wave generating approach for long-crest irregular waves in a numerical tank by our in-house solver naoe-FOAM-SJTU is presented. The naoe-FOAM-SJTU solver is developed using an open source tool kit, OpenFOAM. Reynolds-averaged Navier?Stokes (RANS) equations are chosen as governing equations and the volume of fluid (VOF) is employed to capture the two phases interface. Incoming wave group is generated by imposing the boundary conditions of the tank inlet. A spectrum based correction procedure is developed to make the measured spectrum approaching to the target spectrum. This procedure can automatically adjust the wave generation signal based on the measured wave elevation by wave height probe in numerical wave tank. After 3 to 4 iterations, the measured spectrum agrees well with the target one. In order to validate this method, several wave spectra are chosen and validated in the numerical wave tank, with comparison between the final measured and target spectra. In order to investigate a practical situation, a modified Wigley hull is placed in the wave tank with incoming irregular waves. The wave-induced heave and pitch motions are treated by Fourier analysis to obtain motion responses, showing good agreements with the measurements. 相似文献
11.
In this paper, a wave generating approach for long-crest irregular waves in a numerical tank by our in-house solver naoe-FOAM-SJTU is presented. The naoe-FOAM-SJTU solver is developed using an open source tool kit, OpenFOAM. Reynolds-averaged Navier-Stokes (RANS) equations are chosen as governing equations and the volume of fluid (VOF) is employed to capture the two phases interface. Incoming wave group is generated by imposing the boundary conditions of the tank inlet. A spectrum based correction procedure is developed to make the measured spectrum approaching to the target spectrum. This procedure can automatically adjust the wave generation signal based on the measured wave elevation by wave height probe in numerical wave tank. After 3 to 4 iterations, the measured spectrum agrees well with the target one. In order to validate this method, several wave spectra are chosen and validated in the numerical wave tank, with comparison between the final measured and target spectra. In order to investigate a practical situation, a modified Wigley hull is placed in the wave tank with incoming irregular waves. The wave-induced heave and pitch motions are treated by Fourier analysis to obtain motion responses, showing good agreements with the measurements. 相似文献
12.
Most previous investigations related to composite breakwaters have focused on the wave forces acting on the structure itself from a hydrodynamic aspect. The foundational aspects of a composite breakwater under wave-induced cyclic loading are also important in studying the stability of a composite breakwater. In this study, numerical simulations were performed to investigate the wave-induced pore water pressure and flow changes inside the rubble mound of the composite breakwater and seabed foundation. The validity and applicability of the numerical model were demonstrated by comparing numerical results with existing experimental data. Moreover, the present model clearly has shown that the instantaneous directions of pore water flow motion inside the seabed induced by surface waves are in good agreement with the general wave-induced pore water flow inside the seabed. The model is further used to discuss the stability of a composite breakwater, i.e., the interaction among nonlinear waves, composite breakwater and seabed. Numerical results suggest that the stability of a composite breakwater is affected by not only downward shear flow generating on the seaward slope face of the rubble mound but, also, a high and dense pore water pressure gradient inside the rubble mound and seabed foundation. 相似文献
13.
The motion of a moored semi-submersible in regular waves and the wave-induced internal forces in the semi-submersible have been studied both numerically and experimentally. In the numerical formulation, the semi-submersible is modelled as an externally constrained floating body, which is regarded as being composed of several rigidly connected parts. The linearized equations of motion of each part were obtained in a common reference system fixed on the body. A consistent formulation of the wave-induced internal forces between two parts as well as the external constraining forces is presented.Model tests were carried out using a 1:36 scale model of the semi-submersible, Glomar Arctic III. Very good agreement was achieved between the numerical and model-test results in the practical wave-frequency range. 相似文献
14.
Wave-induced seabed instability, either momentary liquefaction or shear failure, is an important topic in ocean and coastal engineering. Many factors, such as seabed properties and wave parameters, affect the seabed instability. A non-dimensional parameter is proposed in this paper to evaluate the occurrence of momentary liquefaction. This parameter includes the properties of the soil and the wave. The determination of the wave-induced liquefaction depth is also suggested based on this non-dimensional parameter. As an example, a two-dimensional seabed with finite thickness is numerically treated with the EFGM meshless method developed early for wave-induced seabed responses. Parametric study is carried out to investigate the effect of wavelength, compressibility of pore fluid, permeability and stiffness of porous media, and variable stiffness with depth on the seabed response with three criteria for liquefaction. It is found that this non-dimensional parameter is a good index for identifying the momentary liquefaction qualitatively, and the criterion of liquefaction with seepage force can be used to predict the deepest liquefaction depth. 相似文献
15.
通过在波浪水槽中进行一系列物理模型实验, 研究珊瑚礁礁坪宽度变化对珊瑚礁海岸附近波浪传播变形及礁坪上波浪增水的影响。物理实验采用理想化的珊瑚礁模型, 测试了3种礁坪宽度下的一系列不规则波工况。实验结果分析表明: 波浪沿礁传播过程中, 短波持续衰减; 低频长波波高沿礁逐渐增大, 直到海岸线附近达到最大; 随着礁坪宽度的增加, 海岸线附近的短波波高呈下降趋势, 低频长波波高的变化规律不显著; 礁坪上的波浪增水受礁坪宽度变化的影响不明显; 通过对海岸线附近的波浪进行频谱分析发现, 礁坪上低频长波的运动存在着一阶共振模式, 且共振放大效应强度受礁坪水深、入射波峰周期和礁坪宽度共同影响。 相似文献
16.
17.
ＴｈｅｉｒｒｅｇｕｌａｒｂｒｏｋｅｎｗａｖｅｆｏｒｃｅｓｏｎｖｅｒｔｉｃａｌｗａｌｌＬｉＹｕｃｈｅｎｇ,ＬｉｕＤａｚｈｏｎｇ,ＱｉＧｕｉｐｉｎｇ,ＳｕＸｉａｏｊｕｎ（ＲｅｃｅｉｖｅｄＡｐｒｉｌ２１,１９９７,ａｃｃｅｐｔｅｄＪｕｌｙ２,１９９７）Ａｂ... 相似文献
18.
The vertically-integrated effect of interaction between waves and wave-induced currents on wave transformation over a submerged elliptic shoal was investigated based on numerical simulations of the Vincent and Briggs experiment [Vincent, C.L., Briggs, M.J., 1989. Refraction- diffraction of irregular waves over a mound. Journal of Waterway, Port, Coastal and Ocean Engineering, 115(2), pp. 269–284.]. The numerical simulations were performed using two numerical wave-current model systems: one, a combination of the wave model SWAN and the current model SHORECIRC, and the other, a combination of the wave model REF/DIF and the same current model. A time-dependent, phase-resolving wave and current model, FUNWAVE, was also utilized to simulate the experiment. In the simulations, the developed wave-induced currents defocused waves behind the shoal and brought on a wave shadow zone that showed relatively low wave height distributions. For the breaking case of monochromatic waves, the wave heights computed using FUNWAVE showed good agreement with the measurements and the resulting wave-induced currents showed a jet-like velocity distribution in transverse direction. And the computed results of the two model combinations agreed better with the measurements than the computed results obtained by neglecting wave-current interaction. However, it was found that for the case in which transverse interference pattern caused by refracted waves was strong, REF/DIF-SHORECIRC did not correctly evaluate radiation stresses, the gradients of which generate wave-induced currents. SWAN-SHORECIRC, which cannot deal with the interference patterns, predicted a jet-like wave-induced current. For breaking random wave cases, the computed results of the two model combinations and FUNWAVE agreed well with the measurements. The agreements indicate that it is necessary to take into account the effect of wave-induced current on wave refraction when wave breaking occurs over a submerged shoal. 相似文献
19.
The sinking of initially buried irregular blocks into the seabed under wave-induced liquefaction was investigated by experimental methods. Pore-water pressure in the soil, water surface elevation time series and block displacements were measured. Results indicated that initiation of sinking coincides with the instant at which the accumulated pore-water pressure at the bottom level of the block reaches the initial mean normal effective stress. The drag forces and drag coefficients on steadily sinking irregular shaped blocks, as well as spherical and cubical ones, were calculated from the obtained data and compared with the available data in the literature. The results show that the shape of sinking block is of minor importance as far as the kinematics and dynamics of the sinking block is concerned. The conditions at which the sinking terminates are discussed in the light of experiments. Using the approach presented here, the ultimate sinking depths are calculated for the tested cases and compared with the experimental results. The calculated and measured values showed a reasonable agreement when compared. Finally a summary and remarks are presented to calculate the ultimate sinking depth of irregular shaped blocks for practical applications. 相似文献
20.
非结构化网格下近岸波生流数值模拟 总被引：5，自引：2，他引：3
波浪破碎产生的近岸流是近岸海域关键的水动力因素之一。基于近岸波浪的椭圆型缓坡方程和二维近岸波生流方程,建立了非结构化网格下近岸波浪破碎形成的近岸流数值模型。数值模型中,在空间上采用有限体积法进行数值离散,在时间上采用欧拉向前格式数值离散。数值计算结果表明,该数值模型可以有效地模拟近岸波浪破碎产生的近岸流。 相似文献