共查询到20条相似文献，搜索用时 46 毫秒
1.
Air-floating towing beha viors of multi-bucket foundation plat form （MBFP） are investigated with the 1/20-scale model tests and hydrodynamic so ftware MOSES. MOSES numerical model was val idated by test results, and M OSES prototype model of MBFP can eliminate scale effect of model. The influences of towing factors of to wing speed, water depth, freeboard, and w ave direction on air-floating tow ing stability of MBFP were analyzed by model tests and validated MOSES prototype mod el. It is sho wn that the re duction of towing sp eed can effectively d ecrease the to wing force and surge acceleration to improve towing stability. Water depth is another f actor in towing s tability. Obvious shallow water effect will appear in shallow water with sma ll water depth-draft ratio and it w ill disappear gradually and air-floating towing becomes more stable with the increase of water depth. Accelerations of surge, s way and heave are small and they have modest changes when freeboard increases from 0.5 to 2 m. For MBFP, the freeboard is not suggested to be larger than 2 m in following wave. Wave direction has large influence on the towing stability, the surge acceleration and towing force are sensitive to the va riation of wave direction, the surge acceleration and towing force in following wave （0°） and counter wave （180°） are much larger than that in transverse sea （90°and 270°）. 相似文献
2.
3.
A composite numerical model is presented for computing the wave field in a harbor. The mild slope equation is discretized by a finite element method in the domain concerned. Out of the computational domain, the water depth is assumed to be constant. The boundary element method is applied to the outer boundary for dealing with the infinite boundary condition. Because the model satisfies strictly the infinite boundary condition, more accurate results can be obtained. The model is firstly applied to compute the wave diffraction in a narrow rectangular bay and the wave diffraction from a porous cylinder. The numerical results are compared with the analytical solution, experimental data and other numerical results. Good agreements are obtained. Then the model is applied to computing the wave diffraction in a square harbor with varying water depth. The effects of the water depth in the harbor and the incoming wave direction on the wave height distribution are discussed. 相似文献
4.
A composite numerical model is presented for computing the wave field in a harbor. The mild slope equation is discretized by a finite element method in the domain concerned. Out of the computational domain, the water depth is assumed to be constant. The boundary element method is applied to the outer boundary for dealing with the infinite boundary condition. Because the model satisfies strictly the infinite boundary condition, more accurate results can be obtained. The model is firstly applied to compute the wave diffraction in a narrow rectangular bay and the wave diffraction from a porous cylinder. The numerical results are compared with the analytical solution, experimental data and other numerical results. Good agreements are obtained. Then the model is applied to computing the wave diffraction in a square harbor with varying water depth. The effects of the water depth in the harbor and the incoming wave direction on the wave height distribution are discussed. 相似文献
5.
Oblique wave diffraction by segmented offshore breakwaters 总被引：3，自引：0，他引：3
This paper presents a theoretical model to examine oblique wave diffraction by a detached breakwater system consisting of an infinite row of regularly-spaced thin, impermeable structures located in water of uniform depth. The fluid is assumed incompressible and inviscid and to undergo irrotational motion. Wave heights are assumed to be sufficiently small such that linear wave theory is applicable. The eigenfunction expansion solution of Dalrymple and Martin (1990) for normal wave incidence on this breakwater geometry is modified herein to study oblique wave effects. Numerical results, in the form of contour maps of the relative wave height behind the structure, or complex reflection coefficients, are presented for a range of wave and breakwater parameters. The accuracy of the present model is verified by a comparison with existing results for the limiting cases of an isolated detached breakwater, and a breakwater with a single gap. Also, for the multi-gap breakwater, the present solution is further verified for both normal and oblique wave incidence with results in the open literature. 相似文献
6.
This paper presents a new submarine landslide model based on the non-hydrostatic wave model NHWAVE of Ma et al. (2012). The landslide is modeled as a water–sediment mixture. The dense plume is driven by baroclinic pressure forcing introduced by spatial density variations. The model is validated using laboratory measurements of turbidity currents and of water wave generation by a granular landslide. The model is then utilized to study the dependence of landslide motion and associated tsunami wave generation on parameters including sediment settling velocity, initial depth of the landslide and slide density. Model results show that the slide motion and water waves which it generates are both sensitive to these parameters. The relative tsunamigenic response to rigid and deformable landslides of equal initial geometry and density is also examined. It is found that the wave energy is mostly concentrated on a narrow band of the dominant slide direction for the waves generated by rigid landslides, while directional spreading is more significant for waves generated by deformable landslides. The deformable landslide has larger speed and acceleration at the early stage of landslide, resulting in larger surface waves. The numerical results indicate that the model is capable of reasonably simulating tsunami wave generation by submarine landslides. 相似文献
7.
A series of regular wave experiments have been done in a large-scale wave flume to investigate the wave-induced pore pressure around the submarine shallowly embedded pipelines.The model pipelines are buried in three kinds of soils,including gravel,sand and silt with different burial depth.The input waves change with height and period.The results show that the amplitudes of wave-induced pore pressure increase as the wave period increase,and decay from the surface to the bottom of seabed.Higher pore pressures are recorded at the pipeline top and the lower pore pressures at the bottom,especially in the sand seabed.The normalized pressure around pipeline decreases as the relative water depth,burial depth or scattering parameters increase.For the silt seabed,the wavelet transform has been successfully used to analyze the signals of wave-induced pore pressure,and the oscillatory and residual pore pressure can be extracted by wavelet analysis.Higher oscillatory pressures are recorded at the bottom and the lower pressures at the top of the pipeline.However,higher residual pressures are recorded at the top and the lower pressures at the bottom of the pipeline. 相似文献
8.
When the shock wave of underwater explosion propagates to the surfaces of different boundaries, it gets reflected. Then, a negative pressure area is formed by the superposition of the incident wave and reflected wave. Cavitation occurs when the value of the negative pressure falls below the vapor pressure of water. An improved numerical model based on the spectral element method is applied to investigate the cavitation effect of underwater shock near different boundaries, mainly including the feature of cavitation effect near different boundaries and the influence of different parameters on cavitation effect. In the implementation of the improved numerical model, the bilinear equation of state is used to deal with the fluid field subjected to cavitation, and the field separation technique is employed to avoid the distortion of incident wave propagating through the mesh and the second-order doubly asymptotic approximation is applied to simulate the non-reflecting boundary. The main results are as follows. As the peak pressure and decay constant of shock wave increases, the range of cavitation domain increases, and the duration of cavitation increases. As the depth of water increases, the influence of cavitation on the dynamic response of spherical shell decreases. 相似文献
9.
An analytical method is developed to study the sheltering effects on arc-shaped floating perforated breakwaters. In the process of analysis, the floating breakwater is assumed to be rigid, thin, vertical, and immovable and located in water with constant depth. The fluid domain is divided into two regions by imaginary interface. The velocity potential in each region is expanded by eigenfunction in the context of linear theory. By satisfying continuity of pressure and normal velocity across the imaginary fluid interface, a set of linear algebraic equations can be obtained to determine the unknown coefficients for eigenfunction expansions. The accuracy of the present model was verified by a comparison with existing results for the case of arc-shaped floating breakwater. Numerical results, in the form of contour maps of the non-dimensional wave amplitude around the breakwater and diffracted wave amplitude at typical sections, are presented for a range of wave and breakwater parameters. Results show that the sheltering effects on the arc-shaped floating perforated breakwater are closely related to the incident wavelength, the draft and the porosity of the breakwater. 相似文献
10.
Lou Jing P.V. Ridd C.L. Mayocchi M.L. Heron 《Estuarine, Coastal and Shelf Science》1996,42(6):787-802
Waves propagating from deep water into shallow coastal areas produce oscillatory currents near the sea bottom. The magnitude of these currents depend upon the period and amplitude of the incoming waves, and the dissipation mechanism such as wave breaking and bottom friction. Field experiments in a gently shoaling bay, i.e. Cleveland Bay, Northern Australia, showed that there is a broad band of water at around 6 m depth, where the benthic surge velocities are maximum. Both further inshore and offshore, the bottom velocities were less than at 6 m depth, contrary to the normal expectation that the velocities should increase as the water becomes shallower. A new and computationally efficient wave model was developed and was able to reproduce experimental results for waves above 50 cm wave height, but not for small waves (wave height about 30 cm). One implication of this higher band of benthic surge velocities may be to produce high water turbidities in this region. Turbidity data from Cleveland Bay is consistent with this hypothesis. 相似文献
11.
Wave set-up in storm surges is studied using a numerical model for coasts in Tosa Bay, Japan, open to the Pacific Ocean. Simulation models employing only atmospheric pressures and winds as external forces are unable to properly simulate open coast storm surge heights, such as those due to Typhoon Anita (1970). However, the present study shows that a numerical model incorporating wave-induced radiation stresses, as well as wind stresses and pressure gradients, is able to account for the open coast surge heights. There is a maximum contribution of 40% by the radiation stresses to the peak sea level rises. This study also evaluates the effects of the tides; including the tides improves the agreement between the predicted water surface elevations and the observations. The difference in predictions between one-way coupling from wave to surge models and two-way coupling of the surge and wave models is found to be small. 相似文献
12.
Dynamics of large-truncated mooring systems coupled with a catenary moored semi-submersible 总被引：2，自引：2，他引：0
With the floating structures pushing their activities to the ultra-deep water,model tests have presented a challenge due to the limitation of the existing wave basins.Therefore,the concept of truncated mooring system is implemented to replace the full depth mooring system in the model tests,which aims to have the same dynamic responses as the full depth system.The truncated mooring system plays such a significant role that extra attention should be paid to the mooring systems with large truncation factor.Three different types of large truncation factor mooring system are being employed in the simulations,including the homogenously truncated mooring system,non-homogenously truncated mooring system and simplified truncated mooring system.A catenary moored semi-submersible operating at 1000 m water depth is presented.In addition,truncated mooring systems are proposed at the truncated water depth of 200 m.In order to explore the applicability of these truncated mooring systems,numerical simulations of the platform’s surge free decay interacting with three different styles of truncated mooring systems are studied in calm water.Furthermore,the mooring-induced damping of the truncated mooring systems is simulated in the regular wave.Finally,the platform motion responses and mooring line dynamics are simulated in irregular wave.All these simulations are implemented by employing full time domain coupled dynamic analysis,and the results are compared with those of the full depth simulations in the same cases.The results show that the mooring-induced damping plays a significant role in platform motion responses,and all truncated mooring systems are suitable for model tests with appropriate truncated mooring line diameters.However,a large diameter is needed for simplified truncated mooring lines.The suggestions are given to the selection of truncated mooring system for different situations as well as to the truncated mooring design criteria. 相似文献
13.
14.
为了研究真实海洋表面马蹄波的波形特征,通过物理模型试验研究了马蹄波的波形特征参数。研究中通过引入满足共振条件的扰动波成功在试验室内产生了马蹄波,测量和分析了马蹄波的波面升高和水平弧形波峰的几何特征,定义了新的垂向几何参数和水平几何特征参数,给出了不同水深情况下的这些参数的结果,得出了水深对马蹄波几何形态的影响。理论分析了马蹄波的横向结果,并与试验测量结果和弧形处理结果进行了对比。结果表明,马蹄波波形受水深影响较大;水深越浅,马蹄波的波面形状越接近椭圆余弦波,横向波长也越大。 相似文献
15.
N.M. Loder J.L. Irish M.A. Cialone T.V. Wamsley 《Estuarine, Coastal and Shelf Science》2009,84(4):625-636
Given the history and future risk of storm surge in the United States, functional storm protection techniques are needed to protect vital sectors of the economy and coastal communities. It is widely hypothesized that coastal wetlands offer protection from storm surge and wave action, though the extent of this protection is unknown due to the complexities of flow through vegetation. Here we present the sensitivity of storm-surge numerical modeling results to various coastal wetlands characteristics. An idealized grid domain and 400-km2 marsh feature were used to evaluate the effects of marsh characteristics on hurricane surge, including the effects of bottom friction, elevation, and continuity (the ratio of healthy marsh to open water area within the total wetland area).Through coupled hydrodynamic and wave model simulations, it is confirmed that increased bottom friction reduces storm-surge levels for most storms. However, increases in depth associated with marsh elevation loss generally results in a reduction of surge. As marsh continuity is decreased, coastal surge increases as a result of enhanced surge conveyance into and out of the marsh. Storm surge is parameterized in terms of marsh morphology, namely marsh elevation, frictional characteristics, and degree of segmentation, which will assist in the justification for and optimization of marsh restoration in terms of storm protection. 相似文献
16.
This study examines the effects of tides on surges, wave setups and waves, in terms of tidal amplitudes and phases, by using a coupled numerical model of Surge, WAve and Tide (called as SuWAT). The SuWAT model, composed of depth integrated nonlinear shallow water equations and Simulating WAves Nearshore (SWAN) model, is able to simultaneously run with an arbitrary number of nested domains by using the Message Passing Interface. The results for an idealized case indicate that surge and wave setup are increased in the phase of low water and decreased in the high water phase; on the other hand, waves change in a reverse manner. Such changes are enhanced by large tidal variations. The conventional method (e.g., surge plus tide independently) has the possibility of overestimation for the total water level. The hindcast results for Typhoon Ewiniar in 2006 show that the run with tides is more accurate 10% than that without tides in coastal areas of Korea. The nested scheme improves the accuracy up to 40% for the prediction of water levels in the simulations. It is shown that the present coupled model, SuWAT, is capable of predicting both water levels and waves under storm events with reasonable accuracy against the observations. 相似文献
17.
Open coast storm surge water levels consist of wind setup due to wind shear at the water surface; a wave setup component caused by wind induced waves transferring momentum to the water column; an atmospheric pressure head component due to the atmospheric pressure deficit over the spatial extent of the storm system; a Coriolis forced setup or setdown component due to the effects of the rotation of the earth acting on the wind driven alongshore current at the coast; a possible seiche component due to resonance effects initiated by moving wind system, and, if astronomical tides are present, an astronomical tide component (although the tide is typically considered to be a forced astronomical event and not really a direct part of the external wind-driven meteorological component of storm surge). Typically the most important component of a storm surge is the wind setup component, especially on the U.S. East Coast and the Gulf of Mexico shorelines. In many approaches to storm surge modeling, a constant depth approximation is invoked over a limited step size in the computational domain. The use of a constant depth approximation has received little attention in the literature although can be very important to the resulting magnitude of the computed storm surge. The importance of discrete step size to the wind setup storm surge component is considered herein with a simple case computation of the wind setup component on a linear slope offshore profile. The present study findings show that the constant depth approximation to wind setup storm surge estimation is biased on the low side (except in extremely shallow water depths) and can provide large errors if discrete step size is not sufficiently resolved. Guidance has been provided on the error that one might encounter for various step sizes on different slopes. 相似文献
18.
An analytical method is developed to study wave diffraction on arc-shaped and bottom-mounted perforated breakwaters.The breakwater is assumed to be rigid,thin,vertical,immovable and located in water of constant depth.The fluid domain is divided into two regions by imaginary interface.The velocity potential in each region is expanded by eigenfunctions.By satisfying the continuity of pressure and normal velocity across the imaginary fluid interface,a set of linear algebraic equations can be obtained to determine the unknown coefficients of eigenfunctions.Numerical results,in the form of contour maps of the relative wave amplitude around the breakwater,are presented for a range of wave and breakwater parameters.Results show that the wave diffraction on the arc-shaped and bottom-mounted perforated breakwater is related to the incident wavelength and the porosity of the breakwater.The porosity of the perforated breakwater may have great effect on the diffracted field. 相似文献
19.
A. F. de O. Falco 《Ocean Engineering》2002,29(10):1163-1186
This paper describes a theoretical analysis of the ocean wave energy absorption by a periodic linear array of oscillating water columns (OWCs) of arbitrary planform. The analysis is based on classical linear water wave theory and uses the expressions for the wave field resulting from time-harmonic pressure distributions on the free surface. The water depth is assumed finite and constant. The cases of oblique and normal incidence are analysed. A linear power take-off mechanism is assumed, but a complex characteristic constant (allowing for phase control) and air compressibility are considered. Special analytical expressions are derived for OWCs of rectangular and circular planforms. Numerical results for circular chambers show that the hydrodynamic interaction can substantially change the maximum energy absorption, depending on array and chamber geometry and on angle of incidence. 相似文献
20.
基于广义Biot动力理论和Longuet-Higgins线性叠加模型,构建波浪-海床-管线动态响应的有限元计算模型,求解随机波作用下,多层砂质海床中管线周围土体孔隙水压力和竖向有效应力的分布。采用基于超静孔隙水压力的液化判断准则,得出液化区的最大深度及横向范围,从而判断海床土体液化情况。考虑海洋波浪的随机性,将海床视为多孔介质,海床动态响应计算模型采用u-p模式,孔隙水压力和位移视为场变量。并考虑孔隙水的可压缩性、海床弹性变形、土体速度、土体加速度以及流体速度的影响,忽略孔隙流体惯性作用。参数研究表明:土体渗透系数、饱和度以及有效波高等参数对海床土体孔隙水压力、竖向有效应力和液化区域分布有显著影响。 相似文献