共查询到20条相似文献，搜索用时 31 毫秒
1.
Ice loads on a ship hull affect the safety of the hull structure and the ship maneuvering performance in ice-covered regions. A discrete element method （DEM） is used to simulate the interaction between drifting ice floes and a moving ship. The pancake ice floes are modelled with three-dimensional （3-D） dilated disk elements considering the buoyancy, drag force and additional mass induced by the current. The ship hull is modelled with 3D disks with overlaps. Ice loads on the ship hull are determined through the contact detection between ice floe element and ship hull element and the contact force calculation. The influences of different ice conditions （current velocities and directions, ice thicknesses, concentrations and ice floe sizes） and ship speeds are also examined on the dynamic ice force. The simulated results are compared qualitatively well with the existing field data and other numerical results. This work can be helpful in the shil3 structure design and the navigation securitv in ice-covered fields. 相似文献
2.
GPU-Based DEM Simulations of Global Ice Resistance on Ship Hull During Navigation in Level Ice 总被引：1，自引：0，他引：1
The ice resistance on a ship hull affects the safety of the hull structure and the ship maneuvering performance in icecovered regions.In this paper,the discrete element method(DEM)is adopted to simulate the interaction between level ice and ship hull.The level ice is modeled with 3D bonded spherical elements considering the buoyancy and drag force of the water.The parallel bonding approach and the de-bonding criterion are adopted to model the freezing and breakage of level ice.The ship hull is constructed with rigid triangle elements.To improve computational efficiency,the GPU-based parallel computational algorithm was developed for the DEM simulations.During the interaction between the ship hull and level ice,the ice cover is broken into small blocks when the interparticle stress approaches the bonding strength.The global ice resistance on the hull is calculated through the contacts between ice elements and hull elements during the navigation process.The influences of the ice thickness and navigation speed on the dynamic ice force are analyzed considering the breakage mechanism of ice cover.The Lindqvist and Riska formulas for the determination of ice resistance on ship hull are employed to validate the DEM simulation.The comparison of results of DEM,Lindqvist,and Riska formula show that the DEM result is between those the Lindqvist formula and Riska formula.Therefore the proposed DEM is an effective approach to determine the ice resistance on the ship hull.This work can be aided in the hull structure design and the navigation operation in ice-covered fields. 相似文献
3.
冰脊对极地船舶及海洋工程结构的冰载荷设计及冰区安全运行具有重要的影响,其几何形态是重要的考虑因素。为研究冰脊的几何形态,本文基于Voronoi切割算法构造扩展多面体海冰单元,并使其相互冻结形成平整冰;采用离散单元法模拟海冰在相对运动时挤压形成冰脊的动力过程,统计分析脊帆高度、龙骨宽度、龙骨深度、龙骨水平倾角等主要几何参数,并确定这些几何参数间的对应关系。将离散元模拟结果同冰脊现场观测资料对比分析以验证扩展多面体离散元方法模拟冰脊形成过程的可行性。在此基础上讨论冰厚、冰速、海冰强度等因素对冰脊形态的影响。本文采用离散元方法对冰脊形成过程及几何特性的数值分析可为深入开展冰脊的形成机理及其对船舶、海洋工程结构物的冰载荷分析提供参考依据。 相似文献
4.
海冰在结构前的破坏模式以及产生的冰载荷与结构尺度和海冰厚度密切相关。采用海冰离散元方法（DEM）模拟平整冰与直立结构相互作用过程中的海冰破坏模式及整体冰载荷。该离散元方法的计算参数通过与Norstr?msgrund灯塔的现场实测数据对比进行了可靠性验证。在此基础上,对不同宽厚比（结构宽度与海冰厚度的比值）工况下平整冰与直立结构作用过程中的海冰破坏模式和整体冰压力进行了离散元分析。模拟结果表明：当宽厚比＜10时,海冰破坏模式主要为挤压破坏;当10≤宽厚比＜30时,海冰混合破坏发生;当宽厚比≥30时,海冰屈曲破坏发生。从海冰断裂长度与平均冰压力两个方面进一步说明了海冰破坏模式的转变过程。最后,构建了直立结构极值冰压力计算公式。研究成果可为寒区直立结构的整体设计提供参考。 相似文献
5.
基于广义接触模型的离散元方法及其对船体冰载荷的分析 总被引：1，自引：1，他引：0
冰载荷是影响船舶结构安全的主要环境载荷,因而确定破冰船的冰载荷特征可用于船体结构设计及船舶安全预警分析。海冰作为典型的脆性材料,可采用单元间具有黏结失效效应的离散元方法模拟其破碎行为。为有效地模拟海冰破碎的渐进过程,采用由局部黏结点组成黏结单元的广义接触模型。为分析该模型中直接决定黏结单元失效的强度参数的影响,采用海冰单轴压缩和三点弯曲试验数值模拟进行分析。通过模型试验确定了失效模型中法向黏结强度、切向黏结强度和Mohr-Coulomb准则中的接触摩擦系数的影响。将该数值模型应用于极地科学考察船"雪龙号"的平整冰区冰载荷分析中,并与船舶整体冰阻力经验公式进行了对比验证。 相似文献
6.
Considering the discontinuous characteristics of sea ice on various scales,a modified discrete element model（DEM） for sea ice dynamics is developed based on the granular material rheology.In this modified DEM,a soft sea ice particle element is introduced as a self-adjustive particle size function.Each ice particle can be treated as an assembly of ice floes,with its concentration and thickness changing to variable sizes under the conservation of mass.In this model,the contact forces among ice particles are calculated using a viscous-elastic-plastic model,while the maximum shear forces are described with the Mohr-Coulomb friction law.With this modified DEM,the ice flow dynamics is simulated under the drags of wind and current in a channel of various widths.The thicknesses,concentrations and velocities of ice particles are obtained,and then reasonable dynamic process is analyzed.The sea ice dynamic process is also simulated in a vortex wind field.Taking the influence of thermodynamics into account,this modified DEM will be improved in the future work. 相似文献
7.
在寒冷地区,海冰在核电站取水结构物前的堆积会对取水口造成阻塞和损坏,进而影响核电设备的正常运作。以红沿河核电站的取水设施为例,综合考虑该工程海域冰区特点及风和流的作用等因素。建立了海冰的离散元模型,用于模拟海冰在结构物前的堆积和破坏过程。该离散元模型由规则排列的球体颗粒构成,颗粒间采用平行黏结模型进行黏结。考虑了海冰的平均尺寸、密集度及流速三个因素对海冰堆积过程的影响,对海冰堆积高度进行预判。其中,堆积高度随海冰的密集度和流速的增大而增大,而海冰的平均尺寸对堆积高度没有明显影响。分析结果表明,离散元数值模拟可用于评估和预测取水工程中海冰堆积造成堵塞的风险。 相似文献
8.
当船舶在冰区航行时,螺旋桨会与海冰相互碰撞并导致桨叶的变形和损坏,进而影响船舶的航行安全。为研究海冰与螺旋桨的相互作用过程,采用离散元(DEM)—有限元(FEM)耦合方法构建海冰—螺旋桨切削模型。海冰和螺旋桨模型分别采用具有黏结—破碎特性的球体离散单元和8节点六面体有限单元构造。基于该DEM-FEM耦合模型讨论了不同切削深度下,螺旋桨所承受冰载荷的特点和规律;最后,研究了螺旋桨切削海冰过程中进速系数、推力系数、扭矩系数之间的对应关系,并讨论了海冰—螺旋桨相互作用过程中冰压力、Mises应力和变形的分布特点。以上研究可为寒区船舶安全航行和螺旋桨设计提供有益的参考。 相似文献
9.
锥体导管架海洋平台冰激振动的DEM-FEM耦合分析及高性能算法 总被引：1，自引：0，他引：1
在寒区海域,冰荷载是影响海洋平台安全运行的主要环境荷载之一,由其引起的冰激振动给平台结构及其上部设备带来了严重危害。为分析不同冰况下平台的振动响应,本文建立了导管架海洋平台冰激振动的离散元（DEM）-有限元（FEM）耦合模型。采用具有黏接-破碎性能的等粒径球体离散单元对海冰的破碎特性进行模拟,通过由梁单元构建的海洋平台有限元模型获得结构的振动响应。在离散元与有限元的接触区域中实现了两个模型间计算参数的传递。为提高该耦合模型的计算效率和规模,发展了基于动力子结构方法的DEM-FEM耦合模型。为验证该耦合模型的有效性和可行性,将不同冰况下得到的冰荷载与ISO19906和JTS 144-1-2010标准进行了对比。结果表明,计算得到的冰荷载与标准相近,且冰厚与冰荷载呈二次非线性关系。同时,从冰速和冰厚两方面对比了渤海四桩腿JZ20-2 MUQ锥体导管架平台冰激振动加速度的数值结果和现场实测数据,发现冰速与振动加速度呈线性关系,冰厚与振动加速度呈二次非线性关系,并且振动加速度与冰速和冰厚平方的乘积呈线性关系。 相似文献
10.
锥角对锥体结构抗冰性能影响的离散元分析 总被引：1，自引：1，他引：0
在寒区海洋工程中,锥体海洋结构的尺寸参数对其破冰性能具有重要影响。采用具有黏结-破碎功能的离散元方法模拟海冰与锥体结构的相互作用过程中海冰的破坏模式及冰载荷分析。该离散元方法的计算参数通过与渤海油气平台的实测数据对比进行了可靠性验证。在此基础上,当设计海域的潮差固定时,对不同锥角下风电单桩锥体结构的冰载荷和海冰破坏模式进行了离散元分析。计算结果表明:锥体冰载荷随锥角的增大而增大,海冰的平均断裂长度则随锥角的增大而减小;当锥角小于70°时海冰的破碎模式主要为弯曲破坏,而当锥角大于70°时海冰破坏模式则主要为挤压破碎。以上研究结果可为冰区海上风电单桩结构的抗冰锥设计提供参考。 相似文献
11.
The sensitivity of the North Atlantic gyre circulation to high latitude buoyancy forcing is explored in a global, non-eddy resolving ocean general circulation model. Increased buoyancy forcing strengthens the deep western boundary current, the northern recirculation gyre, and the North Atlantic Current, which leads to a more realistic Gulf Stream path. High latitude density fluxes and surface water mass transformation are strongly dependent on the choice of sea ice and salinity restoring boundary conditions. Coupling the ocean model to a prognostic sea ice model results in much greater buoyancy loss in the Labrador Sea compared to simulations in which the ocean is forced by prescribed sea ice boundary conditions. A comparison of bulk flux forced hindcast simulations which differ only in their sea ice and salinity restoring forcings reveals the effects of a mixed thermohaline boundary condition transport feedback whereby small, positive temperature and salinity anomalies in subpolar regions are amplified when the gyre spins up as a result of increased buoyancy loss and convection. The primary buoyancy flux effects of the sea ice which cause the simulations to diverge are ice melt, which is less physical in the diagnostic sea ice model, and insulation of the ocean, which is less physical with the prognostic sea ice model. Increased salinity restoring ensures a more realistic net winter buoyancy loss in the Labrador Sea, but it is found that improvements in the Gulf Stream simulation can only be achieved with the excessive buoyancy loss associated with weak salinity restoring. 相似文献
12.
海冰动力过程的改进离散元模型及在渤海的应用 总被引：1，自引：0，他引：1
海冰的断裂、重叠和堆积等离散分布特性广泛地存在于极区和副极区的不同海域,并对海冰的生消、运移过程有着重要影响。针对海冰在不同尺度下的离散分布特点,发展海冰动力过程的离散元方法有助于完善海冰数值模式,提高海冰数值模拟的计算精度。为此,本文针对海冰生消运移过程中的非连续分布和形变特性,发展了适用于海冰动力过程的改进离散元模型(MDEM)。不同于传统离散元方法,该模型将海冰离散为具有一定厚度、尺寸和密集度的圆盘单元。海冰单元设为诸多浮冰块的集合体,其在运移和相互接触碰撞过程中,依照质量守恒发生单元尺寸、密集度和厚度的相应变化。基于海冰离散性和流变性的特点,该模型采用黏弹性接触本构模型计算单元间的作用力,并依据Mohr-Coulomb准则计算海冰法向作用下的塑性变形及切向摩擦力。为验证该模型的可靠性,本文对海冰在规则水域内的运移和堆积过程进行了分析,离散元计算结果与解析值相一致;此外,对旋转风场下海冰漂移规律的模拟进一步验证了本文方法的精确性。在此基础上,对渤海辽东湾的海冰动力过程进行了48h数值分析,计算结果与卫星遥感资料和油气作业区的海冰现场监测数据吻合良好。在下一步工作中将考虑海冰离散元模拟中的热力因素影响,发展具有冻结、断裂效应的海冰离散元模型,更精确地模拟海冰动力-热力耦合作用下的生消和运移过程。 相似文献
13.
吊舱推进装置在极地船舶中被广泛应用,其转舵模块可以带动螺旋桨摆动从而产生任意方向的推进力,使船舶操纵更为灵活。提出了一种吊舱推进船舶冰区操纵的离散元方法,对具有吊舱推进装置的冰区船舶破冰过程进行了数值模拟。以“雪龙2”号破冰船为研究对象,计算分析了船舶定速直航时的冰阻力,并通过与Lindqvist经验公式的对比验证了冰阻力计算的合理性。在此基础上进一步对船舶在不同冰厚、不同吊舱转向角下的回转破冰运动进行了离散元模拟,分析了回转半径与船长比值随冰厚的变化规律。计算结果表明：船舶的回转性能随冰厚的增大而降低,并随吊舱转向角的增大而显著提高。 相似文献
14.
15.
J.P. Welsh I.M. Lissauer G.L. Hufford T.S. Ellis B.D. Thompson L.D. Farmer R.R. Hiltabrand 《Ocean Engineering》1977,4(4-5):197-203
A spill of #2 fuel oil occurred 28 January 1977 in a dynamic ice field in BBuzzards Bay, Massachusetts. An oil budget study revealed that within four days after the spill occurred, approximately 60% of the oil was incorporated into the fractured ice zones and onto the ice surface. The movement of the oil (initially spilled under the ice) into the fracture zones appears to be the result of water current below the ice and buoyancy spreading mechanisms. Areas of fracture zones and leads provided a surface outlet for the less dense oil as it moved under the ice. When the leads closed, the oil was trapped into tools on top of the ice at the floe edges. The further spread of the oil onto the surface of the ice floes appears to have been caused by the wind. 相似文献
16.
This study explores the ice flow acceleration(21.1%) of Pedersenbreen during 2016–2017 after the extremely warm winter throughout the whole Arctic in 2015/2016 using in situ data and quantitatively analyses the factors contributing to this acceleration. Several data sets, including 2008–2018 air temperature data from Ny-?lesund,ten-year in situ GPS measurements and Elmer/Ice ice flow modelling under different ice temperature scenarios,suggest that the following factors contributed to the ice flow acceleration: the softened glacier ice caused by an increase in the air temperature(1.5℃) contributed 2.7%–30.5%, while basal lubrication contributed 69.5%–97.3%.The enhanced basal sliding was mostly due to the increased surface meltwater penetrating to the bedrock under the rising air temperature conditions; consequently, the glacier ice flow acceleration was caused mainly by an increase in subglacial water. For Pedersenbreen, there was an approximately one-year time lag between the change in air temperature and the change in glacier ice flow velocity. 相似文献
17.
Francesca Pasotti Elena Manini Donato Giovannelli Anne‐Cathrin Wölfl Donata Monien Elie Verleyen Ulrike Braeckman Doris Abele Ann Vanreusel 《Marine Ecology》2015,36(3):716-733
The West Antarctic Peninsula is one of the fastest warming regions on Earth. Faster glacier retreat and related calving events lead to more frequent iceberg scouring, fresh water input and higher sediment loads, which in turn affect shallow water benthic marine assemblages in coastal regions. In addition, ice retreat creates new benthic substrates for colonization. We investigated three size classes of benthic biota (microbenthos, meiofauna and macrofauna) at three sites in Potter Cove (King George Island, West Antarctic Peninsula) situated at similar water depths but experiencing different disturbance regimes related to glacier retreat. Our results revealed the presence of a patchy distribution of highly divergent benthic assemblages within a relatively small area (about 1 km2). In areas with frequent ice scouring and higher sediment accumulation rates, an assemblage mainly dominated by macrobenthic scavengers (such as the polychaete Barrukia cristata), vagile organisms and younger individuals of sessile species (such as the bivalve Yoldia eightsi) was found. Macrofauna were low in abundance and very patchily distributed in recently ice‐free areas close to the glacier, whereas the pioneer nematode genus Microlaimus reached a higher relative abundance in these newly exposed sites. The most diverse and abundant macrofaunal assemblage was found in areas most remote from recent glacier influence. By contrast, the meiofauna showed relatively low densities in these areas. The three benthic size classes appeared to respond in different ways to disturbances likely related to ice retreat, suggesting that the capacity to adapt and colonize habitats is dependent on both body size and specific life traits. We predict that, under continued deglaciation, more diverse, but less patchy, benthic assemblages will become established in areas out of reach of glacier‐related disturbance. 相似文献
18.
2015年10月,利用便携式宽频带地震仪在祁连山老虎沟12号冰川上进行了9 d的冰震观测,在台站的震动信号中识别出大量与冰川动态特性相关的冰震。根据信号的频率等特征,可将其分为短周期冰震和长周期冰震。短周期冰震的持续时间大多在0.1 s以下,频谱集中在20~100 Hz之间,其数量可达每天6 600个,占所检测到冰震的绝大部分。长周期冰震持续时间可达几十秒至数小时,其地震波形频率集中在0.1~10 Hz,观测期间检测到296次长周期冰震。对比冰震发震时间和当地气温发现:气温下降,短周期冰震事件数量快速增加;气温升高,短周期冰震数量逐渐减少。短周期冰震的发震时间分布呈现出以1 d为周期变化的特征。利用麦克斯韦模型模拟的冰川在气温影响下的应力变化可以解释观测到的冰震日变性:当气温下降,冰川温度下降,冰体积收缩并产生应变,相应的拉张应力使得冰裂隙破裂而产生短周期冰震信号。 相似文献
19.
The dynamic analysis of a pipe system is one of the most crucial problems for the entire mining system.A discrete element method(DEM)is proposed for the analysis of a deep-ocean mining pipe system,including the lift pipe,pump,buffer and flexible hose.By the discrete element method,the pipe is divided into some rigid elements that are linked by flexible connectors.First,two examples representing static analysis and dynamic analysis respectively are given to show that the DEM model is feasible.Then the three-dimensional DEM model is used for dynamic analysis of the mining pipe system.The dynamic motions of the entire mining pipe system under different work conditions are discussed.Some suggestions are made for the actual operation of deep-ocean mining systems. 相似文献
20.
由于重叠冰厚度较大,给冰区海洋运输以及海洋生产作业等带来较大影响,为了得到科学客观的重叠冰厚度,需要对重叠冰的形成条件进行深入研究。利用理论分析和数值模拟方法,分析了波浪、风和流对渤海海冰重叠的影响。通过理论计算分析发现,波浪是导致海冰断裂的主要因素;采用离散元方法对海冰重叠过程进行了数值模拟,模拟结果表明海冰在外界动力作用下,海冰初始发生屈曲变形断裂,随后产生重叠。综合分析表明,海冰在同时具备波浪的垂向波动作用以及风或流水平作用力下,冰层比较容易发生重叠,波浪对海冰重叠的作用不可忽略,海冰的重叠长度取决于风和流作用的大小,其作用力越大,重叠长度越大。 相似文献