共查询到20条相似文献，搜索用时 31 毫秒
1.
Cho-Chung Liang 《Marine Geodesy》1999,22(1):19-30
The underwater position of the beacon determined using the conventional mode of the short-baseline acoustic positioning system (SBL system) is usually incorrect due to the inaccuracy of underwater-measured sound speed, which is affected by the environment. This article presents a corrected mode of SBL system to offer a precise solution for the underwater beacon position. The corrected mode using the formulation of Euclidean geometry converges quickly and efficiently, obtaining the precise position of the beacon. Finally, a simulation of coring missions of a vessel is presented to verify the accuracy of the corrected mode of the SBL system. 相似文献
2.
Optimal localization of a seafloor transponder in shallow water using acoustic ranging and GPS observations 总被引：2，自引：0，他引：2
This study utilized circular and straight-line survey patterns for acoustic ranging to determine the position of a seafloor transponder and mean sound speed of the water column. To reduce the considerable computational burden and eliminate the risk of arriving at a local minimum on least-squares inversion, the position of a seafloor transponder was estimated by utilizing optimization approaches. Based on the implicit function theorem, the Jacobian for this inverse problem was derived to investigate the constraints of employing circular and straight-line survey patterns to estimate the position of a transponder. Both cases, with and without knowledge of the vertical sound speed profile, were considered. A transponder positioning experiment was conducted at sea to collect acoustic and GPS observations. With significant uncertainties inherent in GPS measurements and the use of a commercial acoustic transponder not designed for precise ranging, experimental results indicate that the transponder position can be estimated accurately on the order of decimeters. Moreover, the mean sound speed of the water column estimated by the proposed optimization scheme is in agreement with that derived from conductivity, temperature, and density (CTD) measurements. 相似文献
3.
Wen-Hui Cheng 《Ocean Engineering》2006,33(10):1271-1282
The SBL system (Short Baseline System) is usually utilized by offshore working vessels when performing its underwater orientation task so as to facilitate the exploitation of abundant benthal resources, therefore, the precise distance between the vessel and underwater targets for SBL system's estimation module are highly emphasized. However, hydrological data cited in the SBL system's estimation module is not real-time information and is difficult to accurately measure, which causes the calculation errors. Studies with regard to symmetrical SBL system are carried out by most of the researchers these days, yet research in this text shows the advantage to the asymmetrical SBL system's sensor on the vessel's bottom to be installed at discretion to measure and calculate the position. In addition to the locus equation used in the traditional position calculation, Haussiam Elimination, Cramer's rule, 3D geometry relation theory as well as substitution corrections applied to this asymmetrical SBL system to educe the correction for relative geometrical position between the underwater beacon and the sensor on the ship bottom. Through numeric simulation analysis, this SBL system is proved to be a high precision acoustic positioning system based on its quick correction and high precision position calculated by the asymmetrical SBL system established in this study. 相似文献
4.
重物在落水和着底过程中都会产生瞬态声信号,这类信号可被运用于浅水区域水下目标定位。 针对浅水区域目标定位的问题,提出了一种基于小型立体五元基阵的瞬态声源快速被动定位算法。 在分析重物落水信号特征的基础上,选取合适的广义互相关加权函数求得传声器之间的声程差,运用快速最小二乘搜索算法进行声源定位。 结果表明:运用 5 传声器阵列可以同时兼顾定位精度和鲁棒性,且满足实时性要求,该方法可运用于浅水区域瞬态声源定位等领域。 相似文献
5.
A method is developed to estimate ocean sound speed profiles through synthesis of remotely measured environmental data and historical statistics of sound speed obtained at a remotely sensed location. Sound speed profiles are represented by an expansion of empirical orthogonal functions (EOF) of the historical sound speed variation, while the remotely sensed environmental data provide real-time information to determine the expansion coefficients. Environmental inputs are limited to sea surface temperature available from satellite infrared sensors, acoustic time-of-flight and ocean bottom temperature measurable from bottom mounted acoustic and thermal transducers. A multilayer perceptron neural network is implemented to learn the functional transformation from the measured environmental input to the desired EOF coefficient output on a set of representative sound speed profiles. Sea surface temperature, time-of-year, and time-of-flight from the acoustic multipath that maximally samples the vertical sound speed are found to be the dominant inputs. The trained network is computationally efficient and produces estimates for untrained environmental inputs with a mean error of 1.1-4.4 m/s 相似文献
6.
超短基线定位解算中的距离观测值是指换能器与水下应答器之间的直线距离,而海水声速的不均匀分布导致声波在海水中的实际传播路径为连续弯曲的曲线,需要结合实测声速剖面进行声线修正。根据声速在分层介质中的传播特性,本文提出了一种基于二次多项式拟合的声线跟踪算法,采用线性插值方法对声速剖面数据进行合理加密并按等深度进行分层,设定每层声速梯度是不断变化的,用二次多项式拟合声速,基于运动学原理建立了完整的数学解算模型。仿真结果表明,该方法修正后的水下目标分布具有明显的收敛性,且优于等梯度声线跟踪算法和等效声速剖面法,显著提高了超短基线水声定位系统的定位精度。 相似文献
7.
A classification based on the number and types of large-scale acoustic waveguides is proposed for the mean seasonal profiles of sound speed propagation. A scheme for North Atlantic zoning, using typical curves of the sound speed vertical distribution, is given. The channel axis's position is shown not to depend on the water mass haline properties, being controlled by the temperature field vertical stratification.Translated by Vladimir A. Puchkin. 相似文献
8.
9.
10.
A new method of positioning underwater static objects is presented based on Global Positioning System (GPS) acoustics. It adopts a model in which the ranging errors follow a quadratic relation with the travel time of acoustic signals. A least squares technique is used to estimate the effective sound speed. The precise location of an object can then be made. The simulation shows that the method is capable of determining the three-dimensional position with an accuracy of 5 cm in a water depth of 500 m. The operating time is respectively 5–10 minutes in 50–100 m depth and 20–30 minutes in 500 m depth. 相似文献
11.
Traditional Global Navigation Satellite System-Acoustic (GNSS-A) positioning assumes the Layered Model in the sound speed structure, and any of horizontal perturbation of seawater degrades its accuracy. However, the use of the Gradient Model analytically demonstrated that the horizontal gradient of the sound speed structure and displacement can simultaneously be solved using multiple transponders for each of ping. We applied this technique to our observed data and found it unsuitable for real data. We confirmed that a horizontal perturbation with wavelength shorter than the horizontal extent of the transponder array significantly violates the linear approximation in the Gradient Model. Our vertical 2D numerical simulation of internal waves (IWs) forced by tidal oscillation showed that such small-scale IWs could effectively be generated by nonlinear cascade from large-scale IWs of the major tidal constituents. In addition, a small-scale IW in deep water typically has a period of 3–4 h, which degrades positioning accuracy significantly, whereas an IW of much shorter period in shallow water has less effect after removal of the fluctuation by time averaging within a typical observation period. Apparent array position obtained in the synthetic test based on the simulated IW-derived sound speed structure showed features quite similar to that observed in real surveys. To incorporate such deeper perturbation, we proposed a Disturbance Model using dual sea surface platforms, that can solve time-varying perturbation in the vicinity of each transponder.
相似文献12.
Underwater Navigation Based on Real-Time Simultaneous Sound Speed Profile Correction 总被引：1，自引：0，他引：1
Precise sound speed profile (SSP) information is critical when using sonar for underwater terrain navigation. Nevertheless, acquiring SSP information in real-time is difficult, especially in underwater navigation environment. To account for this problem, this paper presents an underwater navigation method that applies real-time SSP correction to the terrain measurements. The method uses a probe to measure the surface sound speed simultaneously. Meanwhile, redundancy of topographic measurement data is exploited to derive the equivalent SSP information. The acquired equivalent SSP is updated continuously with particle filter algorithm. The terrain measurements can be corrected in real-time with the equivalent SSP to improve the performance of underwater terrain navigation. By removing the impact of inaccurate SSP from the terrain measurements, the proposed method can achieve precise and robust underwater navigation result without using an underway-profiling instrument. Simulated results confirm the good performance of the proposed method. 相似文献
13.
The purpose of the current study is to introduce a set of mobile underwater positioning systems (MUPS) that will enable non-offshore vessels to execute underwater missions. Besides mobility, the system would also possess the advantage of having to use fewer acoustic instruments than conventional acoustic positioning systems. The method adopted by the system will involve the use of expendable and multi-functional bathythermographs (XBT) to measure the underwater acoustic speed and the depth of water at the same time. Then it must utilize the geometric relations formed by measuring the position of underwater targets at set intervals during navigation. In addition, since sound does not travel in a straight line when underwater, the iteration and convergence method must be used to perform corrections on the transmission speed and positional errors to obtain an accurate coordinate of the underwater target. After simulation testing, the positioning system established by the current study has proven to be fast in converging the error values along with high positioning accuracy of the system. The results of the study indicate that the MUPS built by the research institute can be utilized on a vessel, and will be very helpful in assisting the management of urgent underwater positioning missions. 相似文献
14.
Centimeter-Level Positioning of Seafloor Acoustic Transponders from a Deeply-Towed Interrogator 总被引：1，自引：0，他引：1
Aaron D. Sweeney C. David Chadwell John A. Hildebrand Fred N. Spiess 《Marine Geodesy》2013,36(1):39-70
An array of three seafloor transponders was acoustically surveyed to centimeter precision with a deeply-towed interrogator. Measurements of two-way acoustic travel time and hydrostatic pressure made as the interrogator was towed above the array were combined in a least-squares adjustment to estimate the interrogator and transponder positions in two surveys spanning two years. No transponder displacements were expected at this site in the interior of the Juan de Fuca Plate (48?11′ N, 127?12′ W) due to the lack of active faults. This was confirmed to a precision of ±2 cm by least-squares adjustment. Marginally detectable blunders in the observations were shown to affect the transponder position estimates by no more than 3 mm, demonstrating the geometric strength of the data set. The accumulation of many hundreds of observations resulted in a significant computational burden on the least-squares inversion procedure. The sparseness of the normal matrix was exploited to reduce by a factor of 1000 the number of calculations. The acoustic survey results suggested that the near-bottom sound speed fields during the two surveys were in better agreement than inferred from yearly single-profile conductivity, temperature, and pressure (CTD) measurements. 相似文献
15.
16.
The accuracy of GPS/Acoustic positioning is crucial for monitoring seafloor crustal deformation. However, the slant range residual is currently the only indicator used to evaluate the precision of positioning seafloor transponders. This study employs a unique Seafloor Acoustic Transponder System (SATS) to evaluate the accuracy of GPS/Acoustic seafloor positioning. The SATS has three transponders and an attitude sensor in a single unit, which provides true lengths of transponder baselines and true attitude of the SATS to ensure assessment reliability and validity. The proposed approach was tested through a GPS/Acoustic experiment, in which an off-the-shelf acoustic system was used to collect range measurements. Using GPS/Acoustic geodetic observations, the positions of three transponders on the SATS were estimated by an optimization technique combined with ray-tracing calculations. The accuracy of the GPS/Acoustic seafloor positioning is assessed by comparing the true baselines and attitude with the results derived from the position estimates of the three transponders. A sensitivity analysis is conducted to investigate the robustness of the GPS/Acoustic positioning results to changes of sound speed. Experimental results demonstrate that the use of the SATS can help to assess the validity of the GPS and acoustic travel time measurements in the GPS/Acoustic seafloor positioning. 相似文献
17.
Hsin-Hung Chen 《Ocean Engineering》2008,35(14-15):1448-1462
Positioning accuracy of an ultra short baseline (USBL) tracking system is significantly reduced with the increase of alignment errors in the installation of sensors. Although techniques for sensor alignment calibration have been developed, they are either complex or lacking in rigor. This study proposes an algorithm to estimate the angular misalignments of a USBL transceiver relative to attitude sensors. The numerical algorithm is based on the positioning errors caused by heading, pitch, and roll misalignments, respectively, when running a circular survey around a seabed transponder. The positioning errors introduced by the angular misalignments outline an iterative scheme of estimating the roll alignment error first, next the heading alignment error, and then finally the pitch alignment error. This makes possible the efficient estimation of all angular misalignments with a high degree of accuracy. With the consideration of measurement error and executing a non-centered and non-perfect circle around the true transponder position, numerical simulations are performed to validate the effectiveness of the proposed algorithm. The simulation results show that the proposed algorithm is robust to the effects of measurement error, non-centered circles, and non-perfect circles. Moreover, the estimates converge fairly quickly, and can be achieved with good accuracy in only a few iterations. 相似文献
18.
采用水下超短基线定位系统和捷联惯导系统组合对水下潜器进行导航时,未知的声速误差会严重影响组合导航的精度。顾及超短基线定位系统的噪声水平、阵列上接收单元的误差特性以及和捷联惯导系统在导航性能的互补性,基于平面波近似原理,建立了SINS/USBL紧组合系统的状态方程和量测方程,并对未改正的声速误差在线估计,提出一种超短基线定位系统和捷联惯导系统紧组合算法。新算法可以将非高斯的未知声速误差进行建模后进行估计,有效提高了捷联惯导系统的误差估计性能。仿真实验结果表明,新算法能有效估计未知声速误差,滤波收敛后的精度明显优于松组合方案,具有很强的实用性。 相似文献
19.
基于长基线系统深海采矿ROV精确定位 总被引：1，自引：0，他引：1
对于深海采矿集矿机ROV的定位,采用传统的长基线水声定位系统通常存在较大误差。对此提出了一种新的算法模型,首先通过比较集矿机测量位置与前一次修正位置的几何关系,对当前集矿机的位置进行修正,然后利用新的集矿机位置修正声速的数值,并得出重新修正后的集矿机测量位置。这样反复的多重迭代使得在某一时刻集矿机ROV的测量位置逐步趋近其理想位置,实现长基线系统的水声精确的三维立体定位。通过数值仿真分析,结果显示与传统的长基线水声定位方法相比,通过该方法获得的集矿机行驶轨迹能更好地趋近其理想行驶曲线,表明该算法的有效性。 相似文献
20.
Guangming Kan Dapeng Zou Baohua Liu Xiangmei Meng Guanbao Li 《Marine Georesources & Geotechnology》2013,31(10):1217-1226
AbstractThree types of sediments were selected to measure their sound speed under changing temperature and pressure conditions in laboratory. The effects of temperature and pressure on sound speed in sediments and their trends were analyzed. The results showed that, with increasing temperature and pressure, the sound speed exhibits an increasing trend in all selected sediments. For each sample, the ratio of the sound speed in sediments to that in seawater almost remained unchanged at different pressures and temperatures, with a maximum fluctuation of 1.09% for temperature dependence and 0.68% pressure dependence. Combining the analysis of experimental results and sound speed correction procedure given by Hamilton, specific correction formulas of sound speed for temperature and pressure were presented. The laboratory-measured sound speed in the experiment and the sound speed obtained in the South Yellow Sea were corrected to reduce the effects of temperature and pressure using the correction formulas. The results show that the correction formulas with constant sound speed ratio are effective for correcting the sound speed measurement errors caused by changes in temperature and pressure. As a further consideration, the effects of the fluctuation of sound speed ratio on sound speed correction were analyzed. 相似文献