共查询到20条相似文献，搜索用时 171 毫秒
1.
A Numerical Investigation of the Reduction of Solitary Wave Runup by A Row of Vertical Slotted Piles
To improve the current understanding of the reduction of tsunami-like solitary wave runup by the pile breakwater on a sloping beach, we developed a 3D numerical wave tank based on the CFD tool OpenFOAM in this study. The Navier Stokes equations were applied to solve the two-phase incompressible flow, combined with an LES model to solve the turbulence and a VOF method to capture the free surface. The adopted model was firstly validated with existing empirical formulas for solitary wave runup on the slope without the pile structure. It is then validated using our new laboratory observations of the free surface elevation, the velocity and the pressure around a row of vertical slotted piles subjected to solitary waves, as well as the wave runup on the slope behind the piles. Subsequently, a set of numerical simulations were implemented to analyze the wave reflection, the wave transmission, and the shoreline runup with various offshore wave heights, offshore water depths, adjacent pile spaces and beach slopes. Finally, an improved empirical equation accounting for the maximum wave runup on the slope was proposed by taking the presence of the pile breakwater into consideration. 相似文献
2.
Local Scour Around Piles Under Wave Action 总被引：1，自引：0，他引：1
The model tests are performed with regular waves, and the effect of wave height, wave period, water depth, sediment size and pile diameter is evaluated. The shape and size of local scour around piles are studied. There are three typical scour patterns due to wave action. It is found that a relationship exists between the erosion depth and the wave number. An empirical formula of the maximum local scour is thus derived. 相似文献
3.
-The hydrodynamic coefficients for each of two piles and three piles in both side-by-side arrangement and tandem arrangement under the action of irregular waves are experimentally investigated. These coefficients vary with the KC number, the relative pile spacing, the number of piles and the pile location, and their relationships are presented in this paper. They can be used in Morison Equation and other equations to calculate directly the in-line wave forces and the transverse forces on each pile in array. 相似文献
4.
《中国海洋工程》1988,(3)
The irregular wave forces on the piles of small diameters are experimentally investigated. The total in-line forces on single vertical pile and on each pile in array in irregular waves are measured. For single pile, the relationships between Cd, Cm and K-C number are determined with the best least-square method in time domain. In the case of two piles in the side-by-side arrangement and the tandem arrangement, a grouping-pile factor, KG, is used to consider the interference between two piles. Based on the experiments, the plots of KG versus K-C number and the relative distance, l/D, are given. 相似文献
5.
Among numerous offshore structures used in oil extraction, jacket platforms are still the most favorable ones in shallow waters. In such structures, log piles are used to pin the substructure of the platform to the seabed. The pile’s geometrical and geotechnical properties are considered as the main parameters in designing these structures. In this study, ANSYS was used as the FE modeling software to study the geometrical and geotechnical properties of the offshore piles and their effects on supporting jacket platforms. For this purpose, the FE analysis has been done to provide the preliminary data for the fuzzy-logic post-process. The resulting data were implemented to create Fuzzy Inference System (FIS) classifications. The resultant data of the sensitivity analysis suggested that the orientation degree is the main factor in the pile’s geometrical behavior because piles which had the optimal operational degree of about 5° are more sustained. Finally, the results showed that the related fuzzified data supported the FE model and provided an insight for extended offshore pile designs. 相似文献
6.
Two- and three-dimensional finite element analysis programs for pile-soil interaction are compiled. Duncan-Chang's Model is used. The construction sequence of the pier is modeled. The pile-soil interface element is used. The influence of the combination type of piles on the deformation of bank slope and pile behaviour is analyzed. Different designs of a pile-supported pier are compared thoroughly. Calculation results show that the stresses and displacements of the pile are directly related to the distance from the bank slope and the direction of inclination. An inclined prop pile set in the rear platform would remarkably reduce the stresses of piles and the displacement of the pier. 相似文献
7.
The inline and lift forces on bipiles in parallel array induced by both irregular waves and currents were investigated experimentally in this paper. The characteristics in both time and frequency domains of inline, lift and resultant forces as well were analyzed. The grouping effect coefficients of inline and resultant forces on two piles related to KC number and relative spacing parameters are given. A comparison of the magnitude and direction of resultant forces on two piles in parallel array with the corresponding values for single cylinder is also made. 相似文献
8.
Experiments were made on plain concrete subjected to triaxial static loading and constant-amphtude compressive fatigue loading with a constant lateral pressure in two directions. The initial confining pressure was O, O. lfc, O. 25fc and O. 4fc, respectively, for the static test, and O. lfc and O. 25fc for the fatigue test. Based on the triaxial compressive constitutive behavior of concrete, the inflexion of confining pressure evolution was chosen to be the fatigue damage criterion during the test. The rule of evolution of longitudinal maximum and minimum strains, longitudinal cyclic modulus and damage were recorded and analyzed. According to the Fardis-Chen criterion model and the concept of equivalent fatigue life and equivalent stress level, a unified S-N curve for multi-axial compressive fatigue loading was proposed. Thus, the fatigue strength factors for different fatigue loading cases can be obtained. The present investigation provides information for the fatigue design of concrete structures. 相似文献
9.
The purpose of this research is to study the dynamic responses of gravity quay walls with block type consisting of“three blocks”experimentally.For this purpose,1g shaking table tests were conducted under different cyclic loadings for two different saturated granular backfill materials(Soil 1 and Soil 2).In this study,Dn50 of Soil 1 and Soil 2 are selected as 2.2 cm and 1.0 cm,respectively.During the experiments,accelerations,soil pressures and displacements were measured for each block.Test results pointed out that Soil 2 caused more damage on structures.The measurements for displacement and tilting of each block were discussed in view of“acceptable level of damage in performance-based design”given in PIANC(2001).The result of the study showed that the definitions of damaged levels given in PIANC(2001)were reliable for using in performance-based methods for seismic design of block type quay walls. 相似文献
10.
11.
Quadrant front face pile supported breakwater is a combination of semicircular and closely spaced pile breakwaters which couples the advantages of these two types. This type of structure consists of two parts. The bottom portion consists of closely spaced piles and the top portion consists of a quadrant solid front face on the seaside. The leeward side of the top portion with a vertical face would facilitate the berthing of vessels. An experimental investigation on this breakwater model in a wave flume is carried out for three water depths. For each water depth, three different spacings between the piles were adopted for the investigation. The dynamic pressures exerted along the quadrant front face due to regular waves were measured. The variation of dimensionless pressures with respect to scattering parameter for different gap ratio (spacing between the piles/diameter of pile) and for relative pile depth (water depth/pile height) are presented and discussed. In addition, the dimensionless total forces exerted on the breakwater model as well as its reflection characteristics as a function of scattering parameter are reported. 相似文献
12.
小尺度群桩应用广泛,一直是学者研究的重点,小尺度有别于大尺度桩柱,由于桩柱周围存在漩涡的脱落,使得受力特性复杂。以往的研究过程中,波浪主要采用单向不规则波浪,并且试验模型多以两桩或三桩组成的群桩结构为主,桩数相对较少。多向不规则波与群桩结构的作用特点有别于单向不规则波且研究较少。通过物理模型试验,针对多向不规则波对于9桩桩排群桩结构的作用进行了研究。首先综合考虑KC1/3数和相对桩径的影响,提出以参数KCLD 1/3数来衡量群桩的效应,并分析了正向力与横向力随着参数KCLD 1/3数和相对桩距的变化关系,研究了群桩中不同桩位桩柱波浪力的变化规律和方向分布宽度对于群桩波浪力的影响。研究结果表明,群桩中各桩的正向力随着方向分布标准差的增大而减小,而横向力在相对桩距较大时随着方向分布标准差的增大而增大,同时群桩中不同位置桩上的波浪力具有较大的差异。 相似文献
13.
Most offshore and coastal structures are supported by pile foundations, which are subjected to large lateral loads due to wind, wave, and water currents. Water currents can induce scouring around piles that reduces lateral capacity and increases lateral deflection of a pile. Current design methods mostly consider the complete removal of soil layers around piles by scouring. In reality, however, scouring creates scour holes at different shapes, sizes, and depths. Their effects on the behavior of laterally loaded piles are not well investigated. A numerical model of a single pile in soft marine clay was first calibrated against field test data without scour. Then several key factors of scour were analyzed, such as the depth, width, and slope of the scour hole and the diameter and head fixity of the pile. The relationships of the ultimate lateral capacity of the single pile with the depth, width, and slope angle of the scour hole were obtained. The numerical results show that the scour depth had more significant influence on the pile lateral capacity than the scour width. In addition, the pile with a free head was more sensitive to scour than the pile with a fixed head. 相似文献
14.
《中国海洋工程》2021,(3)
The low side friction of piles in coral sand results in the low bearing capacity of foundations. In this paper, expansive concrete pile is utilized to improve the bearing capacity of pile foundations in coral sand. Both model tests and numerical simulation are performed to reveal the bearing mechanism of expansive concrete pile in coral sand.Results showed that the lateral earth pressure near pile increases obviously and the side friction of piles is improved,after adding expansion agent to the concrete. The horizontal linear expansion is 1.11% and the bearing capacity increased 41% for the pile, when 25% expansion agent is added. Results in finite element numerical simulation also show that ultimate bearing capacity increases with the increase of the linear expansion ratio. Besides, the area for obvious increase in side friction is below the surface of soil about three times the pile diameter, and the expansion leads to a high side friction sharing of the pile. Therefore, the cast-in-place expansive concrete pile is effective in improving the bearing capacity of piles in coral sand. 相似文献
15.
The pile group with elevated cap is widely used as foundation of offshore structures such as turbines, power transmission towers and bridge piers, and understanding its behavior under cyclic lateral loads induced by waves, tide water and winds, is of great importance to designing. A large-scale model test on 3×3 pile group with elevated cap subjected to cyclic lateral loads was performed in saturated silts. The preparation and implementation of the test is presented. Steel pipes with the outer diameter of 114 mm, thickness of 4.5 mm, and length of 6 m were employed as model piles. The pile group was cyclic loaded in a multi-stage sequence with the lateral displacement controlled. In addition, a single pile test was also conducted at the same site for comparison. The displacement of the pile cap, the internal forces of individual piles, and the horizontal stiffness of the pile group are presented and discussed in detail. The results indicate that the lateral cyclic loads have a greater impact on pile group than that on a single pile, and give rise to the significant plastic strain in the soil around piles. The lateral loads carried by each row of piles within the group would be redistributed with loading cycles. The lateral stiffness of the pile group decreases gradually with cycles and broadly presents three different degradation patterns in the test. Significant axial forces were measured out in some piles within the group, owing to the strong restraint provided by the cap, and finally lead to a large settlement of the pile group. These findings can be referred for foundation designing of offshore structures. 相似文献
16.
A fundamental study of pile–soil systems subjected to lateral loads in offshore deposit was conducted using experimental tests and numerical analysis. The emphasis was on the soil–pile rigidity of a laterally loaded pile in marine clay. Rigid- and flexible-pile analyses were conducted for comparison. A framework for determining the lateral load transfer curve (p–y curves) is proposed based on both field and laboratory model tests. A numerical analysis that takes into account the proposed p–y curves was performed for the pile flexibility parameters such as pile diameter, pile length, pile-bending stiffness, and the modulus of subgrade reaction. Based on the analysis, it is shown that the differences in bending moment and lateral displacement are more significant for flexible piles rather than rigid piles. It was found that the p–y curves influence the behavior of flexible piles more than rigid piles, thus the magnitude and distribution of the p–y curves are significantly important in flexible pile design. 相似文献
17.
海上复杂地质条件下大直径钢管桩时效性试验研究 总被引：1，自引：1，他引：0
通过对3根海上复杂地质条件下的大直径钢管桩采取高应变初打与不同休止时间复打相结合的试验方法,得到不同休止时间钢管桩承载力、侧阻力及端阻力大小,以此对不同桩侧土及持力层对钢管桩时效性的影响进行了研究。研究结果表明:1)钢管桩承载力时效性现象明显,且随时间增长迅速; 2)钢管桩侧阻力的恢复系数远大于端阻力; 3)桩侧黏性土强度的恢复是钢管桩侧阻力增加的主要原因; 4)砂土层虽提供的侧阻力较大,但其对侧阻力增长的贡献不如黏性土; 5)持力层越硬,端阻力与承载力的恢复性越差。 相似文献
18.
19.
Samuel G. Paikowsky Robert V. Whitman Mohsen M. Baligh 《Marine Georesources & Geotechnology》2013,31(3):213-230
Abstract Open‐pipe piles are widely used for offshore structures. During the initial stage of installation, soil enters the pile at a rate equal to the pile penetration. As penetration continues, the inner soil cylinder may develop sufficient frictional resistance to prevent further soil intrusion, causing the pile to become plugged. The open‐ended pile then assumes the penetration characteristics of a closed‐ended pile. The mode of pile penetration significantly alters the soil‐pile interaction during and after installation. This affects the ultimate static bearing capacity (mainly in granular materials), the time‐dependent pile capacity (in clays), and the dynamic behavior and analysis of the piles. Following a summary demonstrating the effects of pile plugging, a review of the common view of offshore pile plugging is undertaken. The interpretation of plugging by referring to the average plug length has led to the erroneous conclusion that in most piles significant plugging action does not occur. Establishment of an analogy between soil samplers and open‐ended piles enabled correct identification of plugging by referring to the incremental changes in plug length. Examination of case histories of plugging of offshore piles revealed that beyond a certain penetration depth‐to‐diameter ratio, most piles are plugged. 相似文献
20.
螺旋桩芯劲性复合桩（helix stiffened cement mixing pile,简称HSCM桩）是一种新型复合桩,其成桩工艺会对桩身及其承载性能有较大影响。为验证HSCM桩在软黏土中同步旋进注浆工艺的可行性,并研究其成桩参数对抗压承载性能的影响,设计了2组缩尺模型试验,包括不同叶片数量与钻进速度的HSCM桩与对比螺旋桩。通过在高岭土制备的软黏土中成桩,并进行抗压承载性能及桩身几何尺寸测试,分析HSCM桩的成桩参数与水泥土桩身间的关系。试验结果表明：同步旋进注浆工艺能够在螺旋桩周围形成倒圆台状的水泥土桩身,水泥土桩身的平均黏结直径约为叶片直径的1.17～1.35倍;适当增加叶片数量能够使水泥与土体充分拌和,提高水泥土桩身的完整性与连续性,以改善HSCM桩的成桩质量;钻进速度大幅提高会导致注浆量不足,减小水泥土桩身的黏结直径与刚度;试验条件下HSCM桩的抗压极限承载力是螺旋桩的3.83～3.93倍,桩径扩大提高了侧摩阻力,注浆工艺加固并提高了土体强度,弥补了叶片在旋进过程中扰动土体造成强度降低的问题。 相似文献