共查询到19条相似文献，搜索用时 312 毫秒
1.
2.
在典型的实验海区，使用双频测深仪和箱式取样器，对海底进行同步探测，获取双频测深仪不同底质类型数据。比较了式取样器海底底质样品，归纳出海底基岩、沙、粘土的双频测深仪水深数据和双频测深仪海底模拟记录图象特征，该特征可为双频测深仪识别海底底质类型提供先验认识。 相似文献
3.
海底浅部沉积物声学研究是海洋地质、水下工程地质、海底矿产资源、军事地质等领域重要的研究内容,海底底质的识别与分类是海洋科学研究的热点问题。相比多波束探测仪,浅地层剖面仪的声源发射频率更低,具有穿透底质能力强的特点,这一特性更有利于进行准确和可靠的海底底质分类。通过浅剖数据进行底质分类技术研究,有望实现目标研究区面向全海域的海底底质分类推广应用。本文在浅剖数据振幅校正处理的基础上,消除了不同采集时间及采集参数对浅剖数据振幅一致性的影响,在层位约束下提取均方根振幅属性,进行研究区海底底质类型识别。初步的取样结果表明：研究区有2类不同的底质类型,分别为黏土和粉砂质黏土。本文对浅剖数据的底质分类结果分区明显且自然,在不同类型底质区的取样处对应不同的均方根振幅强度,黏土取样区的浅剖振幅属性为强振幅,粉砂质黏土取样区的浅剖振幅属性为弱振幅,底质分类结果与地质取样匹配良好。利用本文的浅剖处理与属性提取方法能够有效地实现海洋底质分类。 相似文献
4.
5.
针对目前海底底质分类要素单一造成的底质分类类别不够细致和底质信息获取效率低等问题,提出一种顾及声图纹理特征的海底底质分类方法,综合利用海底底质来源、地理等属性以及声图纹理特征等分类要素,进一步细化海底底质类别,解决了海底底质分类信息混淆或表达不充分等问题。实例数据分析表明,该分类方法克服了传统方法单一考虑底质粒度信息的缺点,可以真实反映海底底质的时空变化特性以及一定范围内的表面起伏特征,并且所包含的海底底质分类信息量更全面,从而可以为用户提供直接形象的海底底质信息。 相似文献
6.
济州岛南部海域海底声呐图像分析与声学底质分类 总被引：2，自引：2，他引：0
东海北部外陆架靠近济州岛南部海域,是黄海槽向冲绳海槽延伸的部分,属于黑潮分支黄海暖流的通道入口,分布着脊槽相间的海底底形,对其海底声呐图像的处理分析及声学底质分类的分析研究,有助于了解该通道海底底形表层纹理特征及沉积物分布规律。基于在济州岛南部海域获取的多波束声呐数据,应用图像处理技术和方法,对数据进行了处理,获得了海底声呐影像图,并对其表层纹理特征进行了描述和分析;同时,基于多波束反向散射强度数据,结合19组海底地质取样数据,建立研究区海底反向散射强度与沉积物粒度特征之间的统计关系模型,并以改进的学习向量量化神经网络方法,实现对海底粉砂质砂、黏土质砂以及砂-粉砂-黏土3种底质类型的快速自动分类识别。 相似文献
7.
8.
9.
10.
11.
介绍了一种液压驱动贯入式海底沉积声学原位测量系统的电路控制单元的研究实现过程,以及该控制单元在南海北部海底沉积声学调查中的应用。该电路控制单元以Cortex-A8处理器为核心,集成大容量FLASH存储器,与单片机接口控制板进行串口通讯,实现对声学发射采集单元和机械液压贯入单元的可视化控制和监测。基于该电路控制单元,海底底质声学原位测量系统兼具自容式和在线式两种工作模式,可自容记录或实时采集声学原位测量单元在海底的工作状态数据、海底沉积物声速和声衰减系数等声学特性数据。该声学原位测量系统的实验室联调及南海海试结果表明,使用该电路控制单元对海底底质声学测量过程的监测与控制是有效的,对精确获取海底底质的原位声学特性有重要作用,可以促进海底底质声学原位测量系统的产品化。 相似文献
12.
海底表层底质分布信息的准确获取在构建海洋基础地理数据库中发挥着重要作用。目前,多波束是实现大范围海底底质分类的有效手段之一,基于多波束测深和反向散射强度数据所派生的声学特征被广泛应用于底质分类建模。然而,随着特征维度的增加,特征空间中存在的无关和冗余特征严重影响底质分类精度。为了定量评估声学特征对底质类别的表征能力,并消除无效特征对分类结果的干扰,本文提出了基于多维度声学特征优选的海底底质分类方法。首先,结合实际底质样本的物理属性对多维特征进行排序和优选,排除冗余和无关特征。其次,分别应用支持向量机、随机森林和深度信念网络构建海底底质监督分类模型。通过利用爱尔兰海南部多波束调查数据和实地取样信息进行试验,结果表明提出方法对海底底质的总体分类精度和Kappa系数分别最高达到了86.20%和0.834,相较于主成分分析和熵指标特征选择方法有明显提高,突出了该方法在海底底质探测及制图的应用潜力。 相似文献
13.
Jian-Jun Long 《Marine Georesources & Geotechnology》2013,31(2):176-189
Seabed sediment microstructure has an influence on its acousto-physical properties, and the properties in a length of the sediment column reflect an aspect of the macroscopic behavior of the microstructure. An original measurement method of the sound attenuation within small distance cross sections in a sediment column, and the corresponding approach in data processing to attain an attenuation factor are detailed in the paper. This method was used to measure the compressional wave in series of points with a small distance in the sediment column, and it is shown that exponential attenuation is a type of compressional wave attenuation model for a sediment column in its full length. It indicates that there are various models of compressional wave attenuation in seabed sediments in the South China Sea after comparison of data from other literature. The method of measuring sound attenuation satisfies the sampling space interval in the acoustical forward and inverse problems in seabed sediments, and the original method provides a new approach for finding out sound attenuation mechanism in seabed sediments on small length scale. 相似文献
14.
为研究小尺度海底沉积物样品的声衰减特性,作者提出了用声学探针测量海底沉积物声波幅值的新方法,对沉积物样品扰动小,两个测量点的距离可小于波长,为海底沉积物微观声衰减测量提供了新手段。作者用小于波长的间隔逐点测量了沉积物的压缩波幅值,数据分析表明沿沉积物柱状样全长的声衰减满足指数衰减模型。目前主要用同轴差距衰减测量法获得海底沉积物声衰减数据,但该方法不能辨识声衰减模型,因此不同海区的测量结果难以建立联系。对此作者又提出用声吸收系数反演的幅值比与声衰减系数反演的R值(两种幅值比的比值)作评价依据,分析了垂直轴差距衰减测量法获得的南海海底沉积物声衰减测量数据,发现部分沉积物样品声衰减的R值远大于1,其声衰减不满足指数衰减模型。在声衰减满足指数衰减模型的条件下,用Hamilton的声衰减和频率经验公式预报的南海沉积物声衰减比与作者用声学探针测量海底沉积物所得的声衰减比对比,通过对R值分析得出Hamilton的声衰减和频率经验公式可以预报南海沉积物声衰减比的范围。作者提出的声学探针测量海底沉积物声衰减的方法的优点是既能获得声衰减数据又能辨识声衰减模型,不同海区测量的沉积物声衰减比可用R值建立联系。 相似文献
15.
Shallow-water imaging multibeam sonars: A new tool for investigating seafloor processes in the coastal zone and on the continental shelf 总被引：8，自引：1，他引：8
John E. Hughes Clarke Larry A. Mayer David E. Wells 《Marine Geophysical Researches》1996,18(6):607-629
Hydrographic quality bathymetry and quantitative acoustic backscatter data are now being acquired in shallow water on a routine basis using high frequency multibeam sonars. The data provided by these systems produce hitherto unobtainable information about geomorphology and seafloor geologic processes in the coastal zone and on the continental shelf.Before one can use the multibeam data for hydrography or quantitative acoustic backscatter studies, however, it is essential to be able to correct for systematic errors in the data. For bathymetric data, artifacts common to deep-water systems (roll, refraction, positioning) need to be corrected. In addition, the potentially far greater effects of tides, heave, vessel lift/squat, antenna motion and internal time delays become of increasing importance in shallower water. Such artifacts now cause greater errors in hydrographic data quality than bottom detection. Many of these artifacts are a result of imperfect motion sensing, however, new methods such as differential GPS hold great potential for resolving such limitations. For backscatter data, while the system response is well characterised, significant post processing is required to remove residual effects of imaging geometry, gain adjustments and water column effects. With the removal of these system artifacts and the establishment of a calibrated test site in intertidal regions (where the seabed may be intimately examined by eye) one can build up a sediment classification scheme for routine regional seafloor identification.When properly processed, high frequency multibeam sonar data can provide a view of seafloor geology and geomorphology at resolutions of as little as a few decimetres. Specific applications include quantitative estimation of sediment transport rates in large-scale sediment waves, volume effects of iceberg scouring, extent and style of seafloor mass-wasting and delineation of structural trends in bedrock. In addition, the imagery potentially provides a means of quantitative classification of seafloor lithology, allowing sedimentologists the ability to examine spatial distributions of seabed sediment type without resorting to subjective estimation or prohibitively expensive bottom-sampling programs. Using Simrad EM100 and EM1000 sonars as an example, this paper illustrates the nature and scale of possible artifacts, the necessary post-processing steps and shows specific applications of these sonars. 相似文献
16.
Evaluation of Laser Scanning and Stereo Photography Roughness Measurement Systems Using a Realistic Model Seabed Surface 总被引：1，自引：0，他引：1
《Oceanic Engineering, IEEE Journal of》2009,34(4):466-475
17.
18.
A linear FM sonar system was developed to support the objective of remote acoustic classification of seafloor sediments. It is a calibrated, wideband, digital, frequency modulated sonar that provides quantitative, high-resolution, low-noise sub-bottom data. Since the linear sonar system can precisely transmit a specified waveform, the calibrated digitally recorded reflection data can be processed to estimate the acoustic impulse response of the seabed and sediment attenuation. An acoustic pulse with special frequency domain weighting characteristics is designed to provide low temporal sidelobe levels and a nearly constant resolution with depth even after passing through a sediment with high losses such as sand. After correlation processing, the wideband acoustic pulse yields an effective beam pattern with high spatial resolution and insignificant sidelobe levels. Data sets generated with the FM profiler indicate that the required temporal and spatial characteristics of the sonar are realized in practice 相似文献