共查询到20条相似文献，搜索用时 281 毫秒
1.
防弯器是柔性管系统中的一个关键附件,其与柔性立管相互作用带来的非线性问题使得预测其疲劳寿命十分困难。以南海某油田柔性立管防弯器为例,采用ABAQUS建立了柔性立管与防弯器的“管中管”分析模型,模型中考虑了两者之间的间隙和滑动摩擦,以及材料非线性和接触非线性等因素。在加载方式上利用“位移”载荷取代传统的“力—角度”载荷,更符合工程实际。利用防弯器材料的ε-N疲劳试验曲线,结合防弯器的应力分析结果,得到危险截面的疲劳寿命。考虑材料非线性的管中管模型和疲劳寿命的计算方法,可为今后运动监测数据的利用和防弯器的优化设计提供借鉴。 相似文献
2.
为了快速并有效地计算海洋平台等薄壁箱型梁结构的约束扭转极限承载能力,进行了薄壁梁约束扭转极限承载能力简化计算方法研究.基于塑性极限状态分析理论,提出了薄壁梁约束扭转极限状态应力分布假设,将薄壁梁视作为一系列由主要支撑构件和扶强材支撑的板格,推导了薄壁梁约束扭转极限承载能力上限的计算公式.应用非线性有限元方法验证了所提假设和计算公式的精度,将所提方法应用于箱型梁模型和半潜平台的约束扭转极限承载能力的计算分析,并与非线性有限元结果进行了比对,结果表明,本方法具有较高的精度,可用于海洋平台等薄壁梁的扭转极限承载力上限的估算. 相似文献
3.
胶州湾三维变动边界的潮流数值模拟 总被引：35，自引：3，他引：35
基于Blumberg等（1986）的河口、陆架和海洋模式，引入变边界处理技术，建立了胶州湾三维变动边界的潮流模型，模型以σ-正交曲线坐标下三维非线性潮波方程为基本方程，引入2.5阶瑞封闭方程组，采用分裂算子法数值求解方程组，利用湍封闭方程求解垂直紊动粘滞系数，采用干湿网格方法模拟潮流漫滩过程，三维变动边界潮流模型计算结果与实测值吻合良好。 相似文献
4.
5.
非线性波浪波面追踪的一种新模式 总被引：1，自引：0，他引：1
基于Laplace方程的Green积分表达式和波面BemouUi方程所建立的非线性波动数学模型,是一个时域上具有初始值的边值问题,而精确地追踪自由表面的波动位置,给出波面运动瞬时的波面高度和波面势函数,是建立时域内非线性波浪数值模式的基础。本文采用0-1混合型边界元剖分计算域边界并离散Laplace方程的Green积分表达式,采用有限元剖分自由水面并推导满足自由表面非线性边界条件的波面有限元方程,联立计算域内以节点波势函数和波面位置高度的时间增量为未知量的线性方程组,通过时步内的循环迭代,给出每个时步上的波面位置和波面势函数,从而建立了一种新的非线性波浪波面追踪模式。数值造波水槽内的波浪试验表明,其数值模拟结果具有良好的计算精度。 相似文献
6.
结合模型试验和数值计算对大潜深、带大开口的球形耐压结构静态力学性能进行了研究。研究中考虑到材料非线性、非弹性的因素,通过对材料拉伸试验曲线的分析,得到了材料应力-应变的近似表达式;并且利用超声测厚仪对结构模型的几何缺陷进行了测量。同时基于参数化设计语言建立了有随机几何缺陷的有限元模型,并利用接触单元考虑了大开口观察窗与耐压结构的联系。试验验证表明论文提出的利用有限元软件分析大潜深、大开口耐压壳体力学性能的计算方法和计算策略是准确可靠的,所获得的结果可供设计使用。 相似文献
7.
在环境条件和使用荷载作用下,高桩码头结构损伤和承载力降低是普遍存在的问题。在役梁板式高桩码头结构安全评估,是保证港口设施安全运行的必要措施。结构整体可靠度是结构安全评估的核心指标,但目前尚未建立结构整体可靠度计算的有效方法。基于非线性有限元数值模型,采用蒙特卡罗模拟技术确定了典型梁板式高桩码头结构整体极限承载力概率分布模型及其统计参数,研究了损伤位置、损伤程度和损伤数量等对极限承载力概率分布及其统计参数的影响,明确了无损结构整体极限承载力概率分布模型及其统计参数可用于损伤结构分析。将结构整体极限承载力作为结构抗力随机变量,采用一次二阶矩法计算结构的可靠指标,建立了一种在役梁板式高桩码头结构整体可靠度计算的有效方法。 相似文献
8.
建立地层孔隙网络模型描述微观孔喉特征,利用逾渗方法计算基于微观渗流机理的相对渗透率曲线,并将之应用到数值模拟计算中,给出考虑微观渗流特征的方程,并进行数值求解,得到地层中流体分布特征。实例分析表明该方法可以得到基于微观特征的剩余油分布数量和形式,为调剖堵水、化学驱提供技术参数,实现微观渗流机理与宏观计算的结合。 相似文献
9.
10.
海洋导管架平台随机响应混合分析方法 总被引：1，自引：1，他引：1
采用将结构的解析分析和数值求解方法相结合的固定式海洋平台随机响应混合求解方法，考虑波浪－结构相互作用和基于最小二乘法原理的非线性曳力的影响。采取两个步骤，第一步进行与结构有关的特征值分析；第二基于谱方程进行响应估计，进行海洋平台的线性和非线性数值分析。 相似文献
11.
This paper firstly figures out a similar scale model regarding ultimate strength experiment of a typical ultra large container ship (ULCS) through combined ultimate longitudinal bending and torsion analysis, in which the similarity theory is proposed to design the scale model for reflecting the progressive collapse behaviors of true ships in ultimate strength model test. The present study presents the similarity between scale model and true ship in cross-section considering the height of neutral axis, the section modulus, the inertia moment about neutral axis and the polar inertia moment should fit the geometrical similarity theory, and in strength considering buckling strength and shear ultimate strength of plates and stiffened panels should fit the strength similarity theory. Numerical investigations are conducted on the ultimate strength of a 10,000 TEU container ship and the similar scale model under pure hogging bending, pure torsion and combined bending and torsion, respectively. The nonlinear finite element method (NFEM) is adopted considering the effects of initial deformations and both material and geometric nonlinearities. Finally, the numerical results are compared with each other and discussed showing a good agreement in both elastic and inelastic range during the progressive collapse behaviors, which means the similar scale model can represent the true ship regarding ultimate strength test. And the similarity theory is verified quite stable after the uncertainty analysis. 相似文献
12.
In this paper, results of comprehensive finite element (FE) analyses carried out on 81 generated models of tubular K-joints are presented. Results of FE models were verified against experimental data and parametric equations. The fatigue life of a tubular joint, which is commonly found in offshore industry, is not only dependent on the value of hot-spot stress (HSS), but is also significantly influenced by the through-the-thickness stress distribution characterized by the degree of bending (DoB). Data extracted from FE analyses was used to study the effects of geometrical parameters on the DoB values in tubular K-joints subjected to two types of out-of-plane bending (OPB) moment loads. The determination of DoB values in a tubular joint is essential for improving the accuracy of fatigue life estimation using the stress-life (S–N) method and particularly for predicting the fatigue crack growth based on the fracture mechanics (FM) approach. Geometrically parametric investigation was followed by a set of nonlinear regression analyses to develop DoB parametric formulas for the fatigue analysis of K-joints under OPB loadings. 相似文献
13.
线弹性土壤中埋设悬跨管道的弯曲和振动特性 总被引：1，自引：0，他引：1
利用细长梁小挠度理论,研究给出了两端埋设在线弹性土壤中的悬跨段管道和埋设段管道在自重作用下的变形和内力公式。基于静挠度公式,用能量法给出了第一阶弯曲振动的固有频率公式。讨论了不同土壤刚度条件下悬跨段管道的变形和内力特征,以及第一阶弯曲振动固有频率,并和工程上推荐使用的简支梁和两端固支梁的静动态特性进行比较。研究表明在跨度大、土壤刚度大、管道弯曲刚度较小时无量纲土壤刚度系数较大,埋设段管道对悬跨段管道的刚度约束比较大,悬跨段管道可以近似按两端固支梁模型来模拟;反之,只有在土壤刚度系数较小的几个参数点上,悬跨管道的静动力特性等价于简支梁模型。 相似文献
14.
Unbonded flexible pipes have superior fatigue performance as the internal armor layers are allowed to move relative to each other, leading to reduced structural loading. The main interactions between the internal layers are the contact forces and the frictional forces. Frictional interaction leads to a complex non-linear response of unbonded flexible pipes making prediction of cyclic bending fatigue a demanding task. Nevertheless, detailed understanding of local armor wire stresses and the related fatigue phenomena is of paramount importance as unbonded flexible risers are often operated close to their mechanical limits. This paper presents a method for calculating the tensile armor wire loading and the hysteresis effect on flexible pipes when subjected to tension, and non-symmetric cyclic bending. The effect of non-symmetric cyclic bending with different tensile armor lay angles, and frictional conditions are studied. The analysis uses an efficient repeated unit cell finite element model, allowing the analysis to be performed on a desktop computer. The study shows that the tensile armor wires gradually translate towards the compression side of the pipe bending plane, when the unbonded flexible pipe is subjected to combined tension and non-symmetric cyclic bending. In the analysis, cyclic bending is applied until steady-state in the bending response is achieved over a full bending cycle. The global bending response of the flexible pipe and the tensile armor wire loading conditions for fully stabilized non-symmetric cyclic bending become symmetric around the frictionless state for the mean cyclic bending curvature. An approximate analytic model for the tensile armor in the stabilized cycle, based on symmetric bending about the geodesic curve corresponding to the mean pipe curvature, is proposed. 相似文献
15.
对用套管加强的T型管节点在平面外弯矩作用下的极限强度作了参数化分析。同时将相应的套管以及管节点的几何参数对极限强度的影响进行评估,并且和未加强的T型管节点作了比较。在计算结果中可以得出在管节点的弦管和撑管的连接处用合适的套管加强,可以将管节点在平面外弯矩作用下的极限强度提高到3倍多。 相似文献
16.
17.
The present note deals with the exact analytical solution of thermal bending of clamped, anisotropic, elliptic plates in the case where the thermal field is given by an expression of the type T(x,y,z)=z(Ax2+Cxy+By2).The problem is of basic interest in some ocean and mechanical structural systems since anisotropic materials are commonly used in those fields. Obviously the case of an orthotropic material constitutes a particular situation of the problem under study. 相似文献
18.
《Ocean Engineering》1999,26(5):485-488
The present note deals with the exact analytical solution of thermal bending of clamped, anisotropic, elliptic plates in the case where the thermal field is given by an expression of the type T(x,y,z)=z(Ax2+Cxy+By2).The problem is of basic interest in some ocean and mechanical structural systems since anisotropic materials are commonly used in those fields. Obviously the case of an orthotropic material constitutes a particular situation of the problem under study. 相似文献
19.
20.
Ole Fabian 《Ocean Engineering》1981,8(3):295-330
A study of the elastic-plastic collapse behaviour of long, cylindrical tubes subjected to combined bending and pressure load is presented.Besides the plastic properties of the tube material, the non-linearities accounted for in the analysis cover the Brazier effect and the influence of geometrical imperfections. The imperfections considered are given either by initial ovalization of the tube cross-section or in terms of initial, short-wave axial buckles. Related to ocean pipe laying, i.e. for thick-walled tubes under combined bending and external pressure load, initial ovalization proves to be by far the more severe type of imperfection. 相似文献